Cu(II) 2-quinoxalinol salen catalyzed oxidation of propargylic,benzylic, and allylic alcohols using tert-butyl hydroperoxide in aqueous solutions

The synthesis of carbonyl compounds by oxidation of alcohols is a key reaction in organic synthesis. Such oxidations are typically conducted using catalysts featuring toxic metals and hazardous organic solvents. Considering green and sustainable chemistry, a copper(II) complex of sulfonated 2-quinoxalinol salen (sulfosalqu) has been characterized as an efficient catalyst for the selective oxidation of propargylic, benzylic, and allylic alcohols to the corresponding carbonyl compounds in water when in combination with the oxidant tert-butyl hydroperoxide. The reactions proceed under mild conditions (70 °C in water) to produce yields up to 99% with only 1 mol % of catalyst loading. This reaction constitutes of a rare example of propargylic alcohol oxidation in water, and it makes this process greener by eliminating the use of hazardous organic solvents. Excellent selectivity was achieved with this catalytic protocol for the oxidation of propargylic, benzylic, and allylic alcohols over aliphatic alcohols. The alcohol oxidation is thought to go through a radical pathway.     

MOF-Stabilized Perfluorinated Palladium Cages Catalyze the Additive-Free Aerobic Oxidation of Aliphatic Alcohols to Acids

Extremely high electrophilic metal complexes, composed by a metal cation and very electron poor σ-donor ancillary ligands, are expected to be privileged catalysts for oxidation reactions in organic chemistry. However, their low lifetime prevents any use in catalysis. Here we show the synthesis of fluorinated pyridine-Pd²⁺ coordinate cages within the channels of an anionic tridimensional metal-organic framework (MOF), and their use as efficient metal catalysts for the aerobic oxidation of aliphatic alcohols to carboxylic acids without any additive. Mechanistic studies strongly support that the MOF-stabilized coordination cage with perfluorinated ligands unleashes the full electrophilic potential of Pd²⁺ to dehydrogenate primary alcohols, without any base, and also to activate O₂ for the radical oxidation to the aldehyde intermediate. This study opens the door to design catalytic perfluorinated complexes for challenging organic transformations, where an extremely high electrophilic metal site is required.     

Oxidation of Organosilanes with Nanoporous Copper as a Sustainable Non‐Noble‐Metal Catalyst

Although many noble‐metal catalysts have been used for the oxidation of organosilanes, there has been less success with non‐noble‐metal catalysts. Here, unsupported nanoporous copper (np‐Cu) is used to catalyze the oxidation of organosilanes under mild conditions. It is the first time that this reaction has been achieved with a heterogeneous copper catalyst with high activity and selectivity. Both water and alcohols are used as oxidants and the corresponding organosilanols and organosilyl ethers are obtained in high yield. The possible mechanism was obtained by kinetic studies. The catalyst could be reused at least five times without evident loss of activity. As a novel green catalyst np‐Cu should play a unique role in organic synthesis.     

Metal-catalysed approaches to amide bond formation

Amongst the many ways of constructing the amide bond, there has been a growing interest in the use of metal-catalysed methods for preparing this important functional group. In this tutorial review, highlights of the recent literature have been presented covering the key areas where metal catalysts have been used in amide bond formation. Acids and esters have been used in coupling reactions with amines, but aldehydes and alcohols have also been used in oxidative couplings. The use of nitriles and oximes as starting materials for amide formation are also emerging areas of interest. The use of carbon monoxide in the transition metal catalysed coupling of amines has led to a powerful methodology for amide bond formation and this is complemented by the addition of an aryl or alkenyl group to an amide typically using palladium or copper catalysts.     

Synthetic Aspects of Metal-Catalyzed Oxidations of Amines and Related Reactions

The metabolism of amines is governed by a variety of enzymes such as amine oxidase, flavoenzyme, and cytochrome P-450. A wide variety of compounds are produced such as ammonia and alkaloids in selective and clean oxidation reactions that proceed under mild reaction conditions. Simulation of the functions of these enzymes with simple transition metal complex catalysts may lead to the discovery of biomimetic, catalytic oxidations of amines and related compounds. Indeed, metal complex catalyzed oxidations have been found to proceed with high efficiency. The first section of this review discusses the dehydrogenative oxidations of amines with transition metal catalysts by transition metal catalysts that simulate amine oxidase. The second section highlights the catalytic oxidation of secondary amines to nitrones by simulation of flavoenzymes. The third section describes the simulation of the function of cytochrome P-450 with lowvalent ruthenium complexes and peroxides. Biomimetic ruthenium-catalyzed oxidations of tertiary amines, secondary amines, and other substrates such as amides, β-lactams, nitriles, alcohols, alkenes, ketones, and even nonactivated hydrocarbons can be performed selectively under mild conditions. These three general approaches provide highly useful strategies for synthesis of fine chemicals and biologically active compounds such as alkaloids, amino acids, and β-lactams.     

Oxidative amide synthesis directly from alcohols with amines

Transition metal catalyzed oxidative amide synthesis directly from primary alcohols and amines is a highly atom economical transformation that evolves hydrogen gas as the only by-product. Several Ru-, Rh-based homogeneous and Ag-based heterogeneous catalysts have been developed for direct amide synthesis. Most of the developed catalysts showed excellent activity with sterically unhindered alcohols and amines; however, limited activity was observed with sterically hindered alcohols or amines, less basic aryl amines, and secondary amines. This account provides an overview of recent advances and challenges in direct amide synthesis.     

Direct organocatalytic hydroalkoxylation of α,β-unsaturated ketones

The direct addition of a variety of alcohols to in situ activated olefins was observed in the presence of mild bifunctional amine/acid catalysts. Unlike existing methods, the reactions proceed at room temperature and in the absence of transition metals. The use of simple commercially available catalysts, amines and acids makes this an attractive method for the preparation of β-alkoxy ketones, which are prevalent targets and intermediates in organic synthesis.     

New Iridium Catalysts for the Selective Alkylation of Amines by Alcohols under Mild Conditions and for the Synthesis of Quinolines by Acceptor‐less Dehydrogenative Condensation

A novel family of iridium catalysts stabilised by P,N‐ligands have been introduced. The ligands are based on imidazo[1,5‐b]pyridazin‐7‐amines and can be synthesised with a broad variety of substitution patterns. The catalysts were synthesised quantitatively from the protonated ligands and a commercially available iridium precursor. The catalysts mediate the alkylation of amines by alcohols under mild conditions (70 °C). In addition, the synthesis of quinolines from secondary or primary alcohols and amino alcohols is reported. This sustainable synthesis proceeds through the liberation of two equivalents of water and two equivalents of dihydrogen. The investigations indicate that catalysts suitable for hydrogen autotransfer or borrowing hydrogen chemistry might also be suitable for acceptor‐less dehydrogenative condensation reactions.     

Reoxidation of Transition‐metal Catalysts with O2

Transition‐metal catalyzed oxidation reactions are central components of organic chemistry. On behalf of green and sustainable chemistry, molecular oxygen (O₂) has been considered as an ideal oxidant due to its natural, inexpensive, and environmentally friendly characters, and therefore offers attractive academic and industrial prospects. In recent years, some powerful organic oxidation methods have been continuously developed. Among them, the use of molecular oxygen (O₂) as a green and sustainable oxidant has attracted considerable attentions. However, the development of new transition metal‐catalyzed protocols using O₂ as an ideal oxidant is highly desirable but very challenging because of the low standard electrode potential of O₂ to reoxidize the transition‐metal catalysts. In this Account, we highlight some of our progress toward the use of transition‐metal catalyzed aerobic oxidation reactions. Through the careful selection of ligand and the acidic additives, we have successfully realized the reoxidation of Cu, Pd, Mn, Fe, Ru, Rh, and bimetallic catalysts under O₂ or air atmosphere (1 atm) for the oxidative coupling, oxygenation reactions, oxidative C‐H/C‐C bond cleavage, oxidative annulation, and olefins difunctionalization reactions. Most of the reactions can tolerate a range of functional groups. These methods provide new strategies for the green synthesis of alkynes, (α ‐keto)amides/esters, ketones/diones, O/N‐heterocycles, β ‐azido alcohols, and nitriles. The high efficiency, low cost, and simple operation under air make these methodologies very attractive and practical. We will also discuss the mechanisms of these reactions which might be useful to promote the new type of aerobic oxidative reaction design.     

Discovery and mechanistic studies of a general air-promoted metal-catalyzed aerobic N-alkylation reaction of amides and amines with alcohols

The thermodynamically unfavorable anaerobic dehydrogenative alcohol activation to aldehydes and hydridometal species is found to be the bottleneck in metal-catalyzed N-alkylations due to a general and unnoticed catalyst deactivation by amines/amides. Thus, different from the anaerobic dehydrogenation process in borrowing hydrogen or hydrogen autotransfer reactions that require noble metal complexes or addition of capricious ligands for catalyst activation, the water-producing, exothermic, metal-catalyzed aerobic alcohol oxidation is thermodynamically more favorable and the most effective and advantageous aldehyde generation protocol. This leads to a general and advantageous air-promoted metal-catalyzed aerobic N-alkylation methodology that effectively uses many simpler, less expensive, more available, and ligand-free metal catalysts that were inactive under typical anaerobic borrowing hydrogen conditions, avoiding the use of preformed metal complexes and activating ligands and the exclusive requirement of inert atmosphere protection. This aerobic method is quite general in substrate scope and tolerates various amides, amines, and alcohols, revealing its potentially broad utilities and interests in academy and industry. In contrast to the commonly accepted borrowing hydrogen mechanism, based on a thorough mechanistic study and supported by the related literature background, a new mechanism analogous to the relay race game that has never been proposed in metal-catalyzed N-alkylation reactions is presented.     

Iron‐catalyzed one‐pot oxidation/Knoevenagel condensation reaction using air as an oxidant

A green and highly efficient iron‐catalyzed one‐pot oxidation/Knoevenagel tandem reaction for the synthesis of α, β‐unsaturated nitriles from secondary alcohols and malononitrile has been achieved. The reaction performed under mild conditions with air as an oxidant, and provided the corresponding oxidation/Knoevenagel prudocts in good to excellent yields within short times avoiding the use of noble metal catalysts and bases. Remarkably, water is the only byproduct in this methodology. The reaction could be performed on a gram scale under the standard reaction conditions.     

Non‐Redox‐Metal‐Catalyzed Redox Reactions: Zinc Catalysts

The advantages of zinc catalysts, such as their low toxicity, low cost, and environmentally benignity, are encouraging organic chemists to explore their applications in organic synthesis. As a non‐redox metal, zinc catalysts have been investigated in redox reactions over the past few decades. Because of the importance of redox reactions, the interest in zinc catalysts, and the fact that no review on zinc‐catalyzed redox reactions has been published, herein, I have collected and summarized the main contributions in this area. This review is divided into two parts: reduction reactions and oxidation reactions.     

Oxidative Transformations of Organic Compounds Mediated by Redox Molecular Sieves

Zeolites are viewed by some as the “philosopher's stone” of modern chemistry.^[1] They are more or less indispensable in oil refining and petrochemicals manufacture where they are widely applied as solid acid catalysts. More recently attention has been focused on their use in the manufacture of fine chemicals. The synthetic utility of zeolites and related molecular sieves (zeotypes) has been considerably extended by the incorporation of redox metals into their frameworks. The resulting redox molecular sieves catalyze a variety of selective oxidations under mild conditions in the liquid phase. Their structural diversity–including variation of the redox metal, incorporation of metal complexes, and the size and polarity of the micropores–provides the possibility of designing tailor-made solid catalysts (“mineral enzymes”) for liquid-phase oxidations with clean oxidants such as O₂, H₂O₂, and RO₂H. Hence, they have enormous potential in industrial organic synthesis as environmentally friendly alternatives to traditional oxidations employing inorganic oxidants in stoichiometric amounts. A primary aim of this review is to familiarize organic chemists with the synthetic potential of redox molecular sieves. An outline of their synthesis, structures, and chemical properties, highlighting their unique advantages, is followed by a discussion of general (mechanistic) features that influence the choice of a suitable catalyst for a particular type of oxidation. The main part of the review deals with the oxidation of various substrates of synthetic interest–such as alkanes, alkenes, (alkyl)arenes, alcohols, and amines–and emphasizes the advantages of redox molecular sieves (including selectivity and stability) over their homogeneous counterparts. New directions towards truly biomimetic solid catalysts, for example zeolite-encapsulated chiral metal complexes as heterogeneous catalysts for asymmetric oxidations, are high-lighted.     

Advances on asymmetric organocatalytic 1,4-conjugate addition reactions in aqueous and semi-aqueous media

Asymmetric Michael addition reactions or 1,4-conjugate addition reactions are considered to be the fundamental C–C bond-forming reaction for the construction of chiral β-nitro, β-carbonyl and several other important structural motifs in organic synthesis. After the development of many chiral metal complexes as catalysts, a tremendous growth in the design and applications of variety of new chiral organocatalysts for asymmetric 1,4-conjugate addition reactions has been witnessed over the last two decades. Initially, asymmetric organocatalysis has been performed in organic solvents, but gradually performing the same catalysis in aqueous and semi-aqueous media became a necessity due to environmental aspects as well as to achieve better reactivity and selectivity. The structural and functional diversity of the chiral organocatalysts derived from natural and synthetic sources utilized differently the water either as the sole solvent, co-solvent or additive for optimising their best performances. In the present review, we discuss a detailed and comprehensive report on the advancement in the field of asymmetric organocatalytic 1,4-conjugate addition reactions in aqueous and semi-aqueous media.     

Solid Phase Catalytic Oxidation of Alcohols by Polymer Supported Rare Earth Catalysts

Oxidation of alcohols to the corresponding aldehydes or ketones is one of the most fundamental reactions in organic chemistry [1,2]. Some of the products of the oxidation exhibit an important role in the organic synthesis as well as pharmaceutical synthesis. In most reactions, the lanthanide complexes show satisfied catalytic activities for some compounds. Furthermore, there has been increasing interest in the lanthanide complexes and several reports have appeared in the literature [3, 4]. But the exploitation of these complexes for the oxidation of some organic substrates has been limited. Here we reported a method for the preparation and the catalytic properties as well as the recycling of lanthanide complexes in oxidation of alcohols.The synthetic procedure for the polymer supported lanthanide complexes is shown as following(scheme 1):●-NH2+CICH2COOH(C2Hs)3N→●-NHCH2COOHM=Ce(Ⅲ), Tb(Ⅲ), Sm(Ⅲ)scheme 1The oxidation of benzyl alcohol was carried out in the presence of iodosylbenzene by the polymer supported Ce(Ⅲ), Tb(Ⅲ) and Sm(Ⅲ) catalysts at 80℃ for 4.0h, the yields of benz-aldehyde are as following (table 1):Table 1 Oxidation of benzyl alcohol with the supported catalysts**Reaction condition: benzyl alcohol 0.1 mmol, iodosylbenzene 0.15mmol,catalyst 0.2mg, 80℃ for 4.0h in 1,2-dichloroethane.It can be seen from the table that the Tb(Ⅲ) complex shows higher catalytic activity for the oxidation of benzyl alcohol. Further investigation is now being carded on to optimize the results.     

Rare-Earth Metal Chlorides Catalyzed One-pot Syntheses of Quinolines under Solvent-free Microwave Irradiation Conditions

Under microwave irradiation and solvent‐free conditions, rare‐earth metal chlorides (RECl₃) have been efficient catalysts for one‐pot synthesis of quinoline derivatives to give products in good to excellent yields through the multi‐component reactions of aldehydes, amines, and alkynes. The rare‐earth metal chlorides can be recycled for six times without notable loss of catalytic activities. This new synthetic approach has prominent features of a short reaction time, high yields of products, operational simplicity, broad substrate scopes, environmentally friendly property and commercially available catalysts. It extends the applications of rare‐earth metal compounds as catalysts in organic synthesis.     

Novel Approach to the Synthesis of Phosphorus Sulfur Organic Compounds and Their Metal Complexes

Abstract

The reaction of elemental phosphorus (P_{ti 4}) and sulfur with protonodonor reagents (alcohols, phenols, and thiols) has been studied in the presence of amines and complexes based on trialkyltrithiophosphites and transition metal halides. A novel approach to the synthesis of phosphorus sulfur organic compounds has been proposed on the basis of these reactions.     

Hydrogenation catalysts based on metal nanoparticles stabilized by organic ligands

The review analyses principal approaches to the synthesis of hydrogenation catalysts based on noble metal nanoparticles stabilized by different organic ligands, such as alcohols, amines, phosphines, ionic liquids, linear polymers, and dendrimers. A possibility of application of new materials, the so-called “breathing” metal-organic frameworks, as matrices for the development of heterogeneous catalysts was considered.     

Design and synthesis of porous non-noble metal oxides for catalytic removal of VOCs

The design and synthesis of highly active non-noble metal oxide catalysts, such as transition- and rare-earth-metal oxides, have attracted significant attention because of their high efficiency and low cost and the resultant potential applications for the degradation of volatile organic compounds(VOCs). The structure-activity relationships have been well-studied and used to facilitate design of the structure and composition of highly active catalysts. Recently, non-noble metal oxides with porous structures have been used as catalysts for deep oxidation of VOCs, such as aromatic hydrocarbons, aliphatic compounds, aldehydes, and alcohols, with comparable activities to their noble metal counterparts. This review summarizes the growing literature regarding the use of porous metal oxides for the catalytic removal of VOCs, with emphasis on design of the composition and structure and typical synthetic technologies.     

Nano-tube TiO_2 as a new catalyst for eco-friendly synthesis of imines in sunlight

Nanomaterials are considered as suitable heterogeneous catalysts for many organic reactions.Herein nano-tube TiO₂ has been reported as a heterogeneous catalyst,for synthesis of imines in sunlight at room temperature under solvent-free conditions.The condensation of less electrophilic carbonyl compounds with poorly nucleophilic amines was afforded imines in excellent yields.