导电导磁管道外任意放置线圈激励下脉冲涡流场时域解析解

利用二阶矢量位和洛伦兹互易定理,解析求解了导电、导磁金属管道外任意放置线圈激励下非轴对称涡流场的频域解.利用求频域式极点处留数的方法求解拉普拉斯反变换,得到了脉冲电流激励下检测线圈两端感应电压以及管壁内脉冲涡流分布的时域解析式.分析比较了不同线圈放置方式下管壁内脉冲涡流的分布和扩散过程,以及感应电压对管壁的灵敏度.研究结果表明:当线圈轴线沿管道径向法线方向放置时,得到的感应电压时域信号最强,对壁厚的检测灵敏度最高.     

脉冲涡流检测瞬态涡流场的时域解析模型

应用Laplace反变换技术建立脉冲涡流检测瞬态涡流场的时域解析模型.首先,基于电磁波的反射与透射理论,应用截断区域特征函数展开式法建立瞬态涡流场的复频域模型,然后通过求解模型极点及其留数应用部分分式展开法求解复频域模型的Laplace反变换,从而建立阶跃型和指数型电流激励下瞬态涡流场的时域解析模型.所建模型具有实现简单、效率高、模型精度不受吉布斯效应影响等优点.最后应用基于Fourier反变换的探头瞬态感应电压模型对本文所建模型,实验结果验证了本文所建模型的正确性.     

Single domain wall dynamics in ferromagnetic lamination with variable conductivity

The influence of variable conductivity and thickness of two outer non-ferromagnetic layers on magnetization reversal of one central ferromagnetic layer is theoretically investigated. The model of a thin rigid 180°$180°$ domain wall moving transversely through the axially magnetized ferromagnetic layer is used to calculate induced eddy currents in lamination from which the domain wall mobility is determined. The effect of asymmetric distribution of eddy currents around moving domain wall results in acceleration of the wall near the edge of the lamination. The known domain wall mobility in ferromagnetic lamination can then be used to determine either the conductivity or the thickness of deposited outer non-ferromagnetic layers as proposed in discussion.     

Observation of magnetoconductivity with terahertz probes for ferromagnetic Fe films

Ultrafast characterization of spin-dependent transport behavior in ferromagnetic systems without contact probes has been of strong demand, recently. We have experimentally investigated spin-dependent complex conductivity for ferromagnetic Fe films of various thickness by means of terahertz time-domain transmission spectroscopy. Comparison of the transmitted terahertz wave amplitude and the spin-dependent conductivity reveals that the magnetization state of films effectively determines the complex conductivity. Non-invasive observation of spin-dependent conductivity by contact-free terahertz probe method is proven to be promising in further investigating spintronic materials, particularly on an ultrafast timescale.     

Electromagnetic-wave reflectivity of the surface of a cubic-ferrite plate

The electromagnetic-wave reflectivity of the surface of an insulating cubic-ferromagnet (ferrite) plate is calculated analytically and numerically with allowance for spin-wave damping. The frequency and magnetic-field dependences of the reflectivity are found at the orientational phase transition point and in the vicinity of this point for various values of the plate thickness. It is shown that the reflectivity exhibits anomalous behavior when the dynamic magnetic permeability becomes equal to the dielectric constant, as well as when dimensional resonances occur for electromagnetic or acoustic waves or ferromagnetic resonance takes place. At frequencies below the magnetoelastic gap in the quasi-spin-wave spectrum, the reflectivity may have anomalously low (down to zero) or anomalously high (up to unity) values. Such frequencies can lie in the microwave region.     

Determination of thermophysical characteristics of materials at thermal effect of constant power

On the basis of the solution to the coefficient inverse problem of heat conductivity we have proposed a method for determination of thermophysical characteristics of material according to temperature measurement in its depth as an approximation of semi-infinite solid, plate of finite thickness, and plate with a layer of ideal conductor at thermal effect of constant power on their surface. The method does not require experimental data smoothing, serves to remove restrictions for heating mode selection, and increases accuracy of thermophysical parameters determination.     

The effect of stripe domain structure on dynamic permeability of thin ferromagnetic films with out-of-plane uniaxial anisotropy

The permeability is calculated for a thin ferromagnetic film with the stripe domain structure and out-of-plane uniaxial magnetic anisotropy. Analytical expressions for the frequency dependence of components of permeability tensor are derived with the use of the Smit–Beljers method, with the thickness of domain walls and the domain wall motion being neglected. The effect of the domain width and the angle between the anisotropy axis and the film plane on the frequency dependence of the permeability is analyzed. General equations relating the static permeability components and the ferromagnetic resonance frequencies are found. The results of the approach are applied to the derivation of the constraint for the microwave permeability of thin ferromagnetic films. The analysis of the constraint as a function of the axis deviation angle, the domain aspect ratio and the damping parameter allows the conditions to be found for maximal microwave permeability. The results obtained may be useful in connection with the problem of developing high-permeable microwave magnetic materials.     

General series expression of eddy-current impedance for coil placed above multi-layer plate conductor

This paper presents a closed expression of the layered-plate factor used to calculate the coil eddy-current impedance over the multi-layer plate conductor. By using this expression, the general series of eddy-current impedance can be written directly without solving the undetermined constant equations. The series expression is easy to use for theoretical analysis and programming. Experimental results show that calculated values and measured values are in agreement. As an application, when the bottom layer of the layered plate is a non-ferromagnetic thin layer conductor and the product of the thickness and conductivity of the layer remains unchanged, using the layered-plate factor expression proposed in this paper, it can be theoretically predicted that the eddy-current impedance curves corresponding to different thin layer thickness values will coincide.     

地层渗透参数反演计算

利用渗流源网格压力(及井底压力)对网格渗透率导数关系(称为渗透率压力场敏感系数)实现由三维渗流方程压强数值解计算井底压力对网格渗透参数导数的计算.基于渗透率压力场敏感系数的计算结果构造地层渗透参数反演方程,由多井系统井压监测数据实现反演地层渗透参数的计算.算例显示:反演方法对均匀(或分块均匀)油藏模型的计算取得了较好的结果,反演迭代10次后计算结果与模型参数的最大相对误差收敛于1%之内.该方法对油藏动态模拟研究及实现油藏参数动态跟踪具有实际意义.     

Traditional,Barkhausen and MAT Magnetic Response to Plastic Deformation of Low-Carbon Steel

Magnetic traditional and adaptive methods as well as Barkhausen noise analysis were used for the testing of material degradation of plastically deformed high quality low-carbon steel. The dependences of the measured magnetic (coercive field, maximum permeability, optimum adapted permeability) and Barkhausen noise (RMS voltage, power spectrum) parameters are understood in terms of the increased dislocation density. The results are discussed in the context of potential application of magnetic testing methods for the indication of plastic deformation levels of ferromagnetic construction steel products.     

超材料微波磁导率色散行为的电可调控性研究

研究在开口金属谐振环(SRR)结构嵌入一个电容二极管后,通过电压调控二极管的电容使得SRR结构的等效电容值发生改变,能实现对SRR的谐振频率和等效磁导率的调控,从而提出了一种智能的微波磁性超材料结构.采用时域差分有限元法(Finite-Difference Time-Domain)和恢复算法模拟了变容二极管的工作电压变化下,SRR结构谐振频率和磁导率的变化规律.研究结果表明工作电压增大使变容二极管的电容值减小时,将导致SRR结构的谐振频率向低频段移动,其磁导率的共振频率也将向低频移动.最后指出了SRR结构与常规磁性材料(如铁氧体)磁导率色散行为的不同之处. 关键词： 超材料 微波磁导率     

Investigations of electron beam induced conductivity in silicon oxide thin films

Silicon oxide thin film conductivity under electron beam irradiation is studied. An induced current in the films is varied in a range from a few tenths to a few values of the beam current. The dependence of the current normalized to a product of the applied voltage and the beam current on the beam energy is found to have a maximum determined by the film thickness, beam energy, and sign of the applied voltage. For the negative voltage applied to the metal electrode deposited on the film, this maximum is observed at the beam energy, at which the depth generation function is smaller by several tens of nanometers than the film thickness. For the positive voltage on the metal electrode, the maximum is observed at higher beam energies. The obtained result could be qualitatively explained under the assumption that a stationary excess carrier distribution is formed under the electron beam. This distribution is shifted with respect to the generation function due to diffusion and drift of excess carriers. A value of this shift is of about a few tens of nanometers, and its sign indicates that the majority carriers providing the induced conductivity in the films studied are electrons.     

Theory of the magnetoelectric effect in ferromagnetic-piezoelectric heterostructures

A theory of the magnetoelectric effect in ferromagnetic-piezoelectric bilayer structures is considered for platelike samples. The magnetoelectric voltage coefficient is expressed through the parameters characterizing the magnetic and piezoelectric phases. It is shown that the magnetoelectric voltage coefficient considerably increases in the region of electromechanical resonance. The thickness ratio between the ferromagnetic and piezoelectric phases at which the magnetoelectric voltage coefficient is maximum is determined. The calculated magnetoelectric voltage coefficients for Permendur-PZT (lead zirconate titanate) structures are presented and compared with the experimental data.     

不同负载下直流偏磁对特高压变压器各侧绕组电流影响的计算及分析

基于特高压变压器的时域场路耦合模型, 利用磁场模型中的能量扰动原理以及电路模型中动态电感参数建立瞬态电路偏微分方程模型。对特高压变压器负载时绕组电流受直流偏磁的影响进行了仿真计算, 针对阻性、感性和容性三种不同负载类型, 对绕组电流进行了直流偏磁计算, 并对其各次谐波变化进行了分析。面对特高压变压器大电感、小电阻带来的极为漫长的过渡过程以及直流偏磁计算易被淹没的难点, 通过在电路模型中增加串联电阻, 使达到稳态的时间大大缩短, 并通过电压迭代补偿, 有效消除增大串联电阻值导致的计算偏差, 通过对比所加偏置电流值与串联绕组中的直流分量值验证了本文模型的正确性。     

热损耗条件下导热系数反演模型及实验研究

通过导热反问题反演求解导热系数通常误差较大,本文构建考虑热损耗条件下的虚拟薄板模型精确求解导热系数。首先通过数值算例验证模型的准确性和稳定性,正向问题使用有限差分法进行求解,反问题求解采用人工蜂群算法进行目标函数最优化。然后搭建第二类边界条件下导热正向装置,进行导热系数实例反演和实验研究,并将新模型与理论模型反演结果对比分析。结果表明理论模型反演结果的相对误差约为-14.76%,而新模型下导热系数反演相对误差达到-4.67%。新模型较理论模型反演结果更精确,有效降低了热损耗对反演的影响,提高了反演精度,更符合实际工况。     

Magnetostatic energy and stripe domain structure in a ferromagnetic plate of finite width with in-plane anisotropy

The magnetostatic energy and domain structure (DS) in a long ferromagnetic plate of a finite width with in-plane anisotropy are calculated for the case of the domain magnetization vectors lying in the plane of the plate. The situation where the DS period is much shorter than the width but is considerably larger than the thickness of the plate is analyzed in detail. The equilibrium DS period and the width ratio of two adjacent domains are determined as functions of an external magnetic field parallel to the plane of the plate by minimizing the energy. The DS period is found to be proportional to the plate width and the domain wall energy and inversely proportional to the squared saturation magnetization. While the width of the favorable domains (with the magnetization parallel to the field) grows with increasing field, the unfavorable domains, rather than disappearing completely, form relatively narrow transition regions between the favorable domains, i.e., 360° domain walls.     

非晶态合金薄带与膜的巨磁电阻抗效应理论及计算

通过建立具有平面近横向各向异性场的非晶态合金薄带及膜的磁畴结构模型，利用线性化Maxwell方程组及Landau-Lifshitz方程，推出了在高频交变磁场及外加面内轴向直流磁场H_ex作用下的铁磁材料的与取向相关的磁导率表达式，得到了对方位角平均的相对磁导率及阻抗的计算式，导出了磁导率与张量磁化率分量间的关系，对材料磁导率的实部及虚部随H_ex的变化进行了计算，并给出了对应的磁谱图.建立的磁导率与外磁场的理论关系可将Panina及Kraus给出的理论结果统一起来. 关键词： 非晶态合金薄带及膜 取向相关磁导率 GMI效应理论与计算 近横向各向异性场     

Sectoral thermal emitter for testing of modern IR systems

The paper presents multi-sector stable IR grey body radiation source, that can be used for testing of MRT. Its main element is monolithic metal plate with a test pattern, made of material with high thermal conductivity. On the surface of the test plate the sectors of different emissivity are created during manufacturing process. As a result when viewed by a thermal camera those sectors exhibit thermal contrast depending mainly on the radiative properties of each sector. The value of thermal contrast between particular sectors can be adjusted by changing the temperature of a test plate with respect to ambient. The emissivity values of particular sectors have been calculated and the procedure of adjusting the thermal contrast has been described, as well as the technology used to create the test plate. The model of described emitter has been tested and the results of temperature values obtained from thermal camera were compared with theoretical, calculated figures. The proposed emitter is dedicated for testing and calibrating of modern observations IR systems.     

Theoretical calculation and experiment of microwave electromagnetic property of Ni(C) nanocapsules

With the combination of the dielectric loss of the carbon layer with the magnetic loss of the ferromagnetic metal core,carbon-coated nickel Ni(C) nanoparticles are expected to be the promising microwave absorbers. Microwave electromagnetic parameters and reflection loss in a frequency range of 2 GHz–18 GHz for paraffin-Ni(C) composites are investigated.The values of relative complex permittivity and permeability, the dielectric and magnetic loss tangent of paraffin-Ni(C) composites are measured, respectively, when the weight ratios of Ni(C) nanoparticles are equal to 10 wt%, 40 wt%, 50 wt%,70 wt%, and 80 wt% in paraffin-Ni(C) composites. The results reveal that Ni(C) nanoparticles exhibit a peak of magnetic loss at about 13 GHz, suggesting that magnetic loss and a natural resonance could be found at that frequency. Based on the measured complex permittivity and permeability, the reflection losses of paraffin-Ni(C) composites with different weight ratios of Ni(C) nanoparticles and coating thickness values are simulated according to the transmission line theory. An excellent microwave absorption is obtained. To be proved by the experimental results, the reflection loss of composite with a coating thickness of 2 mm is measured by the Arch method. The results indicate that the maximum reflection loss reaches-26.73 d B at 12.7 GHz, and below-10 d B, the bandwidth is about 4 GHz. The fact that the measured absorption position is consistent with the calculated results suggests that a good electromagnetic match and a strong microwave absorption can be established in Ni(C) nanoparticles. The excellent Ni(C) microwave absorber is prepared by choosing an optimum layer number and the weight ratio of Ni(C) nanoparticles in paraffin-Ni(C) composites.     

Effect of electromagnetic boundary condition on dynamo actions

In this paper,based on the mean field dynamo theory,the influence of the electromagnetic boundary condition on the dynamo actions driven by the small scale turbulent flows in a cylindrical vessel is investigated by the integral equation approach.The numerical results show that the increase of the electrical conductivity or magnetic permeability of the walls of the cylindrical vessel can reduce the critical magnetic Reynolds number.Furthermore,the critical magnetic Reynolds number is more sensitive to the varying electrical conductivity of the end wall or magnetic permeability of the side wall.For the anisotropic dynamo which is the mean field model of the Karlsruhe experiment,when the relative electrical conductivity of the side wall or the relative magnetic permeability of the end wall is less than some critical value,the m=1(m is the azimuthal wave number)magnetic mode is the dominant mode,otherwise the m=0 mode predominates the excited magnetic field.Therefore,by changing the material of the walls of the cylindrical vessel,one can select the magnetic mode excited by the anisotropic dynamo.