Cationic Ruthenium(II) Carbonyl Complexes with Nitrile Ligands

Stable cationic complexes of the type [RuCO(PPh₃)₂(L)(RCN)]⁺[ClO₄]^? derived from acetonitrile and acrylonitrile have been synthesized. The bidentate ligands (LH) used are acetylacetone, benzoylacetone, dibenzoylmethane, trifluorothenoyl acetone and 8-hydroxyquinoline. The complexes have been characterized by elemental analysis, IR, conductivity, ¹H and ³¹P NMR and ESCA studies, and possible stereochemistry has been established.     

Cyclometallated Rhodium(III) Complexes with Diimine Ligands

The synthesis of a mononuclear Rh(III) complex, as a representative example of a series of related species, containing two cyclometallating ligands ppy (2-phenylpyridine) and one diimine bpy (2,2′-bipyridine) from a binuclear Cl-bridged compound is described. The absorption spectrum shows a maximum at 364 nm (ε = 7000), with a very weak shoulder (ε = 10) at 454 nm. This band is tentatively assigned to a metal-to-ligand charge-transfer transition. A reversible, one-electron reduction appears in the cyclic voltammogram at E_1/2 = ?1.41 V (vs. NHE) and a irreversible oxydation at E_p = + 1.1 V. A detailed NMR analysis including ¹³C-NMR, NOE, SFORD as well as deuteration of the bpy ligand indicates the formation of only one isomer, having a C₂ axis, bisecting the bpy ligand, with the two carbon ligands in cis-position. ¹⁰³Rh, ¹³C and ¹⁰³Rh,H couplings are observed.     

The Tunable Luminescence of Ruthenium(II) Complexes Containing Different Tetrazolate Ligands

Three luminescent mononuclear Ru^II compounds, [Ru^II(bpy)₂( L¹ )](BF₄) ( 1 ), [Ru^II(bpy)₂( L² )](BF₄) ( 2 ), and the neutral compound [Ru^II(bpy)₂( L³ )] ( 3 ), were obtained, by treatment of [Ru^II(bpy)₂Cl₂] with the tetrazolate (tz)-containing ligands L¹ – L³ . All the compounds were well characterized by IR, UV/Vis, and ¹H NMR and their redox properties were also investigated by cyclic voltammogram. The crystal structure of 3 was determined by X-ray crystallography and it clearly shows that the Ru^II ion is octahedrally coordinated by two bpy ligands and a deprotonated L³ ligand. After introduction of these tz ligands, 1 – 3 are more sensitive towards the change of micro-environment of solvents as compared with that of [Ru^II(bpy)₃]²⁺. This effect is most obvious in 3 , since it contains a 2^– ligand L³ . The slight modification of diimine ligand make these complexes have potential applications as sensors.     

Photocytotoxic Activity of Ruthenium(II) Complexes with Phenanthroline-Hydrazone Ligands

This paper reports on the synthesis and characterization of two new polypyridyl-hydrazone Schiff bases, (E)-N′-(6-oxo-1,10-phenanthrolin-5(6H)-ylidene)thiophene-2-carbohydrazide (L¹) and (E)-N′-(6-oxo-1,10-phenanthrolin-5(6H)-ylidene)furan-2-carbohydrazide (L²), and their two Ru(II) complexes of the general formula [RuCl(DMSO)(phen)(Lⁿ)](PF6). Considering that hydrazides are a structural part of severa l drugs and metal complexes containing phenanthroline derivatives are known to interact with DNA and to exhibit antitumor activity, more potent anticancer agents can be obtained by covalently linking the thiophene acid hydrazide or the furoic acid hydrazide to a 1,10-phenanthroline moiety. These ligands and the Ru(II) complexes were characterized by elemental analyses, electronic, vibrational, ¹H NMR, and ESI-MS spectroscopies. Ru is bound to two different N-heterocyclic ligands. One chloride and one S-bonded DMSO in cis-configuration to each other complete the octahedral coordination sphere around the metal ion. The ligands are very effective in inhibiting cellular growth in a chronic myelogenous leukemia cell line, K562. Both complexes are able to interact with DNA and present moderate cytotoxic activity, but 5 min of UV-light exposure increases cytotoxicity by three times.     

Comparison of Physical and Photophysical Properties of Monometallic and Bimetallic Ruthenium(II) Complexes Containing Structurally Altered Diimine Ligands

The physical and photophysical properties of a series of monometallic, [Ru(bpy)(2)(dmb)](2+), [Ru(bpy)(2)(BPY)](2+), [Ru(bpy)(Obpy)](2+) and [Ru(bpy)(2)(Obpy)](2+), and bimetallic, [{Ru(bpy)(2)}(2)(BPY)](4+) and [{Ru(bpy)(2)}(2)(Obpy)](4+), complexes are examined, where bpy is 2,2'-bipyridine, dmb is 4,4'-dimethyl-2,2'-bipyridine, BPY is 1,2-bis(4-methyl-2,2'-bipyridin-4'-yl)ethane, and Obpy is 1,2-bis(2,2'-bipyridin-6-yl)ethane. The complexes display metal-to-ligand charge transfer transitions in the 450 nm region, intraligand pi --> pi transitions at energies greater than 300 nm, a reversible oxidation of the ruthenium(II) center in the 1.25-1.40 V vs SSCE region, a series of three reductions associated with each coordinated ligand commencing at -1.3 V and ending at approximately -1.9 V, and emission from a (3)MLCT state having energy maxima between 598 and 610 nm. The Ru(III)/Ru(II) oxidation of the two bimetallic complexes is a single, two one-electron process. Relative to [Ru(bpy)(2)(BPY)](2+), the Ru(III)/Ru(II) potential for [Ru(bpy)(2)(Obpy)](2+) increases from 1.24 to 1.35 V, the room temperature emission lifetime decreases from 740 to 3 ns, and the emission quantum yield decreases from 0.078 to 0.000 23. Similarly, relative to [{Ru(bpy)(2)}(2)(BPY)](4+), the Ru(III)/Ru(II) potential for [{Ru(bpy)(2)}(2)(Obpy)](4+) increases from 1.28 to 1.32 V, the room temperature emission lifetime decreases from 770 to 3 ns, and the room temperature emission quantum yield decreases from 0.079 to 0.000 26. Emission lifetimes measured in 4:1 ethanol:methanol were temperature dependent over 90-360 K. In the fluid environment, emission lifetimes display a biexponential energy dependence ranging from 100 to 241 cm(-)(1) for the first energy of activation and 2300-4300 cm(-)(1) for the second one. The smaller energy is attributed to changes in the local matrix of the chromophores and the larger energy of activation to population of a higher energy dd state. Explanations for the variations in physical properties are based on molecular mechanics calculations which reveal that the Ru-N bond distance increases from 2.05 ? (from Ru(II) to bpy and BPY) to 2.08 ? (from Ru(II) to Obpy) and that the metal-to-metal distance increases from approximately 7.5 ? for [{Ru(bpy)(2)}(2)(Obpy)](4+) to approximately 14 ? for [{Ru(bpy)(2)}(2)(BPY)](4+).     

Synthesis and Characterization of Bridged Bimetallic Complexes. I. Copper(II) Complexes with Conjugated Diimine Ligands

A series of binucleating Uganda with fully conjugated π-systems have been synthesized. Homobinuclear copper(II) complexes of the form [(Cu(dien)ClO₄)₂L]-(ClO₄)₂, where dien is diethylenetriamine and L is binucleating ligand, were prepared. Mononuclear complexes, with structure similar to that of the preceeding compounds, [Cu(dien)L′(ClO₄)](ClO₄) were synthesized as reference compounds. The infrared spectra, elctronic spectra and magnetic properties were studied. The inductive effect, steric effect and the effect of the length of the conjugated π-system on the magnetic exchange interaction between the two copper ions are discussed. The electrochemical properties of these complexes were investigated by cyclic voltammetry. The copper ions showed the cooperative phenomena and a quasi-reversible sequential transfer of two electrons at the same potential.     

The Efficient Syntheses of Three Novel Bridging Phenanthroline Ligands and Their Binuclear Ruthenium(II) Complexes

Three bridging ligands (L) and their binuclear phenanthroline ruthenium(II) complexes {[Ru(1, 10-phenanthroline)₂]₂(L)}(PF₆)₄ were synthesized and characterized by IR, ¹H NMR, and elemental analysis, where L are 1,8-adipoylamido-bis(1,10-phenanthroline-5-yl) (L₁), 1,11-azelaoylamidobis(1,10-phenanthroline-5-yl) (L₂), and p-phthaloylamido-bis(1,10-phenanthroline-5-yl) (L₃).     

Cyclopentadienyl Ruthenium(II) Complexes with Bridging Alkynylphosphine Ligands: Synthesis and Electrochemical Studies

The reaction of [CpRuCl(PPh₃)₂] (Cp=cyclopentadienyl) and [CpRuCl(dppe)] (dppe=Ph₂PCH₂CH₂PPh₂) with bis‐ and tris‐phosphine ligands 1,4‐(Ph₂PC≡C)₂C₆H₄ ( 1 ) and 1,3,5‐(Ph₂PC≡C)₃C₆H₃ ( 2 ), prepared by Ni‐catalysed cross‐coupling reactions between terminal alkynes and diphenylchlorophosphine, has been investigated. Using metal‐directed self‐assembly methodologies, two linear bimetallic complexes, [{CpRuCl(PPh₃)}₂(μ‐dppab)] ( 3 ) and [{CpRu(dppe)}₂(μ‐dppab)](PF₆)₂ ( 4 ), and the mononuclear complex [CpRuCl(PPh₃)(η¹‐dppab)] ( 6 ), which contains a “dangling arm” ligand, were prepared (dppab=1,4‐bis[(diphenylphosphino)ethynyl]benzene). Moreover, by using the triphosphine 1,3,5‐tris[(diphenylphosphino)ethynyl]benzene (tppab), the trimetallic [{CpRuCl(PPh₃)}₃(μ₃‐tppab)] ( 5 ) species was synthesised, which is the first example of a chiral‐at‐ruthenium complex containing three different stereogenic centres. Besides these open‐chain complexes, the neutral cyclic species [{CpRuCl(μ‐dppab)}₂] ( 7 ) was also obtained under different experimental conditions. The coordination chemistry of such systems towards supramolecular assemblies was tested by reaction of the bimetallic precursor 3 with additional equivalents of ligand 2 . Two rigid macrocycles based on cis coordination of dppab to [CpRu(PPh₃)] were obtained, that is, the dinuclear complex [{CpRu(PPh₃)(μ‐dppab)}₂](PF₆)₂ ( 8 ) and the tetranuclear square [{CpRu(PPh₃)(μ‐dppab)}₄](PF₆)₄ ( 9 ). The solid‐state structures of 7 and 8 have been determined by X‐ray diffraction analysis and show a different arrangement of the two parallel dppab ligands. All compounds were characterised by various methods including ESIMS, electrochemistry and by X‐band ESR spectroscopy in the case of the electrogenerated paramagnetic species.     

Preparation and Spectral Properties of Au(III) Complexes with Heterocyclic Diimine Ligands

Russian Journal of General Chemistry -     

Supramolecular Assembly of Triangulo Pd(II) Diimine Complexes Containing Triply‐Bridging Sulfide Ligands

We report here a substituent effect of diimines on the solid‐state assembly of interesting triangulo Pd(II) complexes, [(Pd(d‐t‐bpy))₃(μJ₃‐S)₂][NO₃]₂ 1 ·[NO₃]₂ and [(Pd(bpy))₃(μ₃‐S)₂][ClO₄]₂ 2 ·[ClO₄]₂ (d‐t‐bpy = 4,4′‐di‐tert‐butyl‐2,2′‐bipyridine, bpy = 2,2′‐bipyridine). 2 ·[ClO₄]₂ shows the intermolecular π···π interactions leading to the formation of one‐dimensional frameworks, whereas 1 ·[NO₃]₂ only shows the discrete structure in the solid state, featuring an interesting herring‐bone arrangement. The variation in structural motifs from 1 ·[NO₃]₂ to 2 ·[ClO₄]₂ is expected to be dominated by the substituent's steric hindrance for the diimine ligand. Thus, the crystal‐engineering approach has proved successful in the solid‐state packing due to a substituent's modification of the diimine ligand.     

Syntheses and Characterization of a Pair of Isomers of Heteroleptic Bis(Bidentate) Ruthenium(II) Complexes with Two Different Monodentate Ligands

Two isomers of heteroleptic bis(bidentate) ruthenium(II) complexes with dimethyl sulfoxide (dmso) and chloride ligands, trans(Cl,N_bpy)- and trans(Cl,N_Hdpa)-[Ru(bpy)Cl(dmso-S)(Hdpa)]⁺ (bpy: 2,2′-bipyridine; Hdpa: di-2-pyridylamine), are synthesized. This is the first report on the selective synthesis of a pair of isomers of cis-[Ru(L)(L′)XY]ⁿ⁺ (L≠L′: bidentate ligands; X≠Y: monodentate ligands). The structures of the ruthenium(II) complexes are clarified by means of X-ray crystallography, and the signals in the ¹H NMR spectra are assigned based on ¹H–¹H COSY spectra. The colors of the two isomers are clearly different in both the solid state and solution: the trans(Cl,N_bpy) isomer has a deep red color, whereas the trans(Cl,N_Hdpa) isomer is yellow. Although both complexes have intense absorption bands at λ≈440–450 nm, only the trans(Cl,N_bpy) isomer has a shoulder band at λ≈550 nm. DFT calculations indicate that the LUMOs of both isomers are the π* orbitals in the bpy ligand, and that the LUMO level of the trans(Cl,N_bpy) isomer is lower than that of the trans(Cl,N_Hdpa) isomer due to the trans effect of the Cl ligand; thus resulting in the appearance of the shoulder band. The HOMO levels are almost the same in both isomers. The energy levels are experimentally supported by cyclic voltammograms, in which these isomers have different reduction potentials and similar oxidation potentials.     

Ethylene Oligomerization Catalyzed by Nickel(II) Diimine Complexes

ＩｎｔｒｏｄｕｃｔｉｏｎＬｏｗ ｃａｒｂｏｎｌｉｎｅａｒα ｏｌｅｆｉｎｓａｒｅｕｓｅｄｐｒｉｍａｒｉｌｙａｓｃｏ ｍｏｎｏｍｅｒｓｆｏｒｔｈｅｐｒｏｄｕｃｔｉｏｎｏｆｌｉｎｅａｒｌｏｗｄｅｎｓｉｔｙｐｏｌｙｅｔｈｙｌｅｎｅ (ＬＬＤＰＥ) ,ｐｌａｓｔｉｃｉｚｅｒｓａｎｄｓｙｎｔｈｅｔｉｃｌｕｂｒｉ ｃａｎｔｓ .Ｉｎｒｅｃｅｎｔｙｅａｒｓ ,ｍｕｃｈａｔｔｅｎｔｉｏｎｈａｓｂｅｅｎａｔｔｒａｃｔｅｄｔｏｔｈｅｆｉｅｌｄｏｆｃａｔａｌｙｔｉｃｂｅｈａｖｉｏｒｏｆｌａｔｅｔｒａｎｓｉｔｉｏｎｍｅｔａｌｃｏｍ…     

Ethylene Oligomerization Catalyzed by Nickel（Ⅱ） Diimine Complexes

Ethylene oligomerization has been investigated by using catalyst systems composed of nickel(II) diimine complexes (diimine = N, N′‐o‐phenylene bis (salicylideneaminato), N, N′‐o‐phenylenebisbenzal, N, N′‐ethylenebisbenzal) and ethylaluminoxane (EAO). The main products in toluene and at 110–200 °C were olefins with low carbon numbers (C₄—C₁₀). Effects of reaction temperature, Al/Ni molar ratio and reaction period on both the catalytic activity and product distribution were explored. The activity of 1.84 × 10⁵ g of oligomer/(mol_NI · h), with 87.4% of selectivity to C₄—C₁₀ olefins, was attained at 200 °C in the reaction when a catalyst composed of NiCl₂ (PhCH = o‐NC₆H₄N = CHPh) and EAO was used.     

钌(II)多吡啶配合物与DNA相互作用研究*

DNA是遗传信息的携带者和基因表达的物质基础,金属配合物与DNA的相互作用研究已受到广泛关注,成为生物无机化学的重要研究内容之一。本文简要评述了钌(II)多吡啶配合物在DNA识别、断裂及拓扑异构酶抑制方面的研究情况。     

Efficient Water Oxidation Catalyzed by Mononuclear Ruthenium(II) Complexes Incorporating Schiff Base Ligands

Four new charge‐neutral ruthenium(II) complexes containing dianionic Schiff base and isoquinoline or 4‐picoline ligands were synthesized and characterized by NMR and ESI‐MS spectroscopies, elemental analysis, and X‐ray diffraction. The complexes exhibited excellent chemical water oxidation activity and high stability under acidic conditions (pH 1.0) using (NH₄)₂Ce(NO₃)₆ as a sacrificial electron acceptor. The high catalytic activities of these complexes for water oxidation were sustained for more than 10 h at low concentrations. High turnover numbers of up to 3200 were achieved. A water nucleophilic attack mechanism was proposed. A Ru^V?O intermediate was detected during the catalytic cycle by high‐resolution mass spectrometry.     

DNA-Binding Capabilities and Anticancer Activities of Ruthenium(II) Cymene Complexes with (Poly)cyclic Aromatic Diamine Ligands

Ruthenium(II) arene complexes of the general formula [RuCl(η⁶-p-cymene)(diamine)]PF₆ (diamine = 1,2-diaminobenzene (1), 2,3-diaminonaphthalene (2), 9,10-diaminophenanthrene (3), 2,3-diaminophenazine (4), and 1,2-diaminoanthraquinone (5) were synthesized. Chloro/aqua exchange was evaluated experimentally for complexes 1 and 2. The exchange process was investigated theoretically for all complexes, revealing relatively fast exchange with no significant influence from the polycyclic aromatic diamines. The calf thymus DNA (CT-DNA) binding of the complexes increased dramatically upon extending the aromatic component of the diamines, as evaluated by changes in absorption spectra upon titration with different concentrations of CT-DNA. An intercalation binding mode was established for the complexes using the increase in the relative viscosity of the CT-DNA following addition of complexes 1 and 2. Theoretical studies showed strong preference for replacement of water by guanine for all the complexes, and relatively strong Ru–N_guanine bonds. The plane of the aromatic systems can assume angles that support non-classical interactions with the DNA and covalent binding, leading to higher binding affinities. The ruthenium arenes illustrated in this study have promising anticancer activities, with the half maximal inhibitory concentration (IC₅₀) values comparable to or better than cisplatin against three cell lines.     

Photooxidation of Diimine Dithiolate Platinium(II) Complexes Induced by Charge Transfer to Diimine Excitation

A photochemical and photophysical investigation was carried out on (tbubpy)Pt(II)(dpdt) and (tbubpy)Pt(II)(edt) (1 and 2, respectively, where tbubpy = 4,4'-di-tert-butyl-2,2'-bipyridine, dpdt = meso-1,2-diphenyl-1,2-ethanedithiolate and edt = 1,2-ethanedithiolate). Luminescence and transient absorption studies reveal that these complexes feature a lowest excited state with Pt(S)(2) --> tbubpy charge transfer to diimine character. Both complexes are photostable in deoxygenated solution; however, photolysis into the visible charge transfer band in air-saturated solution induces moderately efficient photooxidation. Photooxidation of 1 produces the dehydrogenation product (tbubpy)Pt(II)(1,2-diphenyl-1,2-ethenedithiolate) (4). By contrast, photooxidation of 2 produces S-oxygenated complexes in which one or both thiolate ligands are converted to sulfinate (-SO(2)R) ligands. Mechanistic photochemical studies and transient absorption spectroscopy reveal that photooxidation occurs by (1) energy transfer from the charge transfer to diimine excited state of 1 to (3)O(2) to produce (1)O(2) and (2) reaction between (1)O(2) and the ground state 1. Kinetic data indicates that excited state 1 produces (1)O(2) efficiently and that reaction between ground state 1 and (1)O(2) occurs with k approximately 3 x 10(8) M(-)(1) s(-)(1).