Functional polymers. XLVIII. Polymerization of ω-alkenoate derivatives

Esters of ω-alkenoic acids have been homopolymerized with transition metal initiating systems. The key to the successful polymerization was the complexation of the monomer prior to its addition to the initiating system. Titanium trichloride, aluminum activated, was found to be best as the transition metal part of the initiator systems, with diethyl-, or better, diisobutylaluminum chloride as the reducing agents and n-hexane or toluene as the solvents. Best results for polymerizations were obtained with 2,6-dimethylphenyl esters of the functional α-olefin monomers; however, other phenyl esters also polymerized well. Attempts to polymerize methyl 10-undecenoate gave the corresponding polymer in only low yields. Polymers of the 2,6-dimethylphenyl esters, obtained in high molecular weight, were characterized. Polymers were also obtained from 2,6-dimethylphenyl 7-octenoate, but not from ω-alkenoates with less than three methylene units between the ester group and the terminal olefin group. Poly(2,6-dimethylphenyl 10-undecenoate) was hydrolyzed in an aqueous sodium hydroxide/1,4-dioxane solution to poly(sodium 10-undecenoate) that in turn was neutralized with acetic acid to poly(10-undecenoic acid).     

Functional polymers. XLIX. Copolymerization of ω-alkenoates with α-olefins and ethylene

The 2,6-dimethylphenyl ester of 10-undecenoic acid was copolymerized with 1-dodecene, 1-octene, 1-hexene, propylene, and ethylene using coordination initiation systems based on “aluminum-activated” titanium trichloride and dialkylaluminum chlorides. The copolymerizations with higher α-olefins proceeded smoothly and gave copolymers incorporating from 60 to 90% of the 10-undecenoate feed. Copolymerization with propylene gave incorporation of 5 mol % of 2,6-dimethylphenyl 10-undecenoate; with ethylene only 3 mol % of the ω-alkenoate was readily incorporated. All copolymers were characterized by elemental analysis, dilute solution viscosity, and by their IR ¹H- and ¹³C-NMR spectra.     

Molecular diversity via amino acid derived alpha-amino nitriles: synthesis of spirocyclic 2,6-dioxopiperazine derivatives

[reaction: see text] Chiral spirocyclic 2,6-dioxopiperazines were synthesized from amino acid derived alpha-quaternary alpha-amino nitriles via H(2)SO(4)-promoted cyano hydration, followed by base-mediated cyclization and N-alkylation. This methodology, requiring the previous preparation of the amino nitrile by a modified Strecker reaction, was applied to Phe, Trp, Pro, Asp, Glu, and Ser derivatives. In the case of the Trp-derived amino nitrile the major product of the treatment with H(2)SO(4) was not the expected carboxamide, but a new tetracyclic indoline derivative containing the novel heterocyclic system hexahydropyrrolo[1',2',3':1,9a,9]imidazo[1,2-a]indole, as a result of a domino tautomerization. The treatment of this indoline derivative with refluxing 1 N HCl led to a Trp-derived 2,6-dioxopiperazine. The 2,6-dioxopiperazine ring opened under the reaction conditions of methyl ester saponification, giving N-(carboxyalkyl)amino acid derivatives. Therefore, the synthesis of 2,6-dioxopiperazines containing free carboxylic acids from the respective methyl esters required transesterification to benzyl esters, followed by hydrogenolysis.     

Synthesis and oxidation of 2,6-dimethyl-1,4-dihydropyridine-3, 5-dicarboxylic acid esters

Twenty-six esters of 2,6-dihydropyridine-3,5-dicarboxylic acid were obtained by means of the Hantzsch pyridine synthesis. The synthesized compounds were oxidized by chloranil to the corresponding pyridine derivative.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1230–1237, September, 1975.     

Micro-determination of total phthalate esters in biological samples by gas-liquid chromatography.

A method was investigated in which all of the phthalate esters in biological samples were determined as phthalic acid by gas-liquid chromatography. The method is based on the separation of phthalate esters from the sample with n-hexane, saponification of the esters with an alkaline ethanolic solution to give phthalic acid, purification of the acid by extraction with diethyl ether and column chromatography using silica gel, and conversion of the acid into bis(2,2,2-trifluoroethyl) phthalate with a 2,2,2-trifluoroethanol solution containing boron trifluoride. The derivative obtained is highly sensitive to an electron-capture detector, giving a sensitivity of 0.1 pg. Biological samples fortified with di(2-ethylhexyl) phthalate at levels of 5-100 ppb were analyzed, with recoveries of 70-100%.     

Poly(alkylene oxide) ionomers VIII. Synthesis of methyl ω-alkenoates and methyl ω-epoxyalkanoates

ω-Alkenoic acids, either commercially available or synthesized, were esterified to their corresponding methyl esters. They were characterized by their infrared, ¹H-, and ¹³C-NMR spectra. The ω-alkenoates prepared were: propenoate (acrylic acid), butenoate, pentenoate, hexenoate, heptenoate, octenoate, nonenoate, and decenoate. These compounds were epoxidized with m-chloroperoxybenzoic acid to the corresponding methyl ω-epoxyalkanoates. The rate of epoxidation of the double bond is found to increase as the double bond is separated from the carbomethoxy group by increasing numbers of methylene groups. When at least three methylene groups are inserted, the rate of epoxidation becomes constant and is similar to the epoxidation of ω-olefins. The methyl ω-epoxyalkanoates were characterized by their infrared, ¹H-, and ¹³C-NMR spectra. Methyl ω-alkenoates and methyl ω-epoxyalkanoates were prepared and characterized, and their purification was studied in preparation for their investigation as monomers for olefin or epoxide polymerization using corrdination initiators.     

Polymeric catalysis: Imidazoles grafted onto poly(vinylamine). I. Synthesis and grafting of imidazolylalkanoic acids

Some ω-(1-imidazolyl) and ω-[4(5)-imidazolyl]alkanoic acids were synthesized and grafted onto poly(vinylamine) with an amide bond. These water-soluble grafts were used to study the kinetics of the esterolysis of activated phenyl esters. The 1-substituted imidazoles were prepared by the reaction of the sodium salt of imidazole with the ethyl ω-bromoalkanoates. The 4(5)-substituted imidazoles were prepared from urocanic acid or 4(5)-hydroxymethylimidazole. The ω-(1-imidazolyl)alkanoic acids were grafted onto poly(vinylamine) via their acyl–guanidine derivatives; the 3-[4(5)-imidazolyl]propanoic acid was grafted with a water-soluble carbodiimide.     

A new synthesis of cyclic α-amino acid derivatives by the intramolecular reaction of magnesium carbenoid with N-magnesio arylamine as the key reaction

A new synthesis of pipecolic acid and homopipecolic acid derivative was accomplished from 1-chloroalkyl p-tolyl sulfoxides having a 2-aminophenyl group at the ω-position by treatment with i-PrMgCl via the intramolecular reaction of magnesium carbenoid with N-magnesio arylamine. In a similar way, proline and pipecolic acid derivatives were synthesized from 1-chloroalkyl p-tolyl sulfoxides having an arylamino group at the ω-position.     

Hot Topics in Polysaccharide Chemistry – Selected Examples

Summary: The paper highlights recent developments in polysaccharide chemistry. Cellulose tert-butyl- and thexyldimethylsilyl ethers with degree of substitution up to 2 were accessible and comprehensively characterized by means of NMR spectroscopy. These derivatives enable the preparation of 3-O-functionalized cellulose ethers. Especially the allyl ether as protecting group at position 3 can be used for the synthesis of 2,6-di-O-methyl cellulose. Nucleophilic displacement reactions of cellulose p-toluenesulfonic acid esters with amines afforded deoxyamino celluloses that form stable monolayers on different substrates. Based on 6-deoxy-6-azido cellulose, dendrons with a focal alkyne moiety were bound via the copper(I) catalyzed Huisgen reaction. Moreover, dextran derivatives were synthesized that form stable nanoparticles useful, e.g., for the determination of the pH value in biological systems.     

Cationic ruthenium complex of the formula [RuCl(2,6-diacetylpyridine)(PPh3)2]BArF and its catalytic activity in the formation of enol esters

A new ruthenium 2,6-diacetylpyridine complex was synthesized and applied in the atom-economic synthesis of enol esters through Markovnikov-directed addition of carboxylic acids to terminal alkynes. The ruthenium complex [RuCl(dap)(PPh₃)₂]⁺BArF^? was synthesized from [RuCl₂(PPh₃)₂] and the corresponding ligand 2,6-diacetylpyridine (dap). The complex was characterized structurally. The new ruthenium complex was utilized under ambient conditions as a catalyst in the Markovnikov addition of carboxylic acids to terminal alkynes to afford the corresponding enol esters in 93% to 52% isolated yields (85?°C, 16?h reaction time, 1?mol% catalyst loading).     

An effective method for the synthesis of carboxylic esters and lactones using substituted benzoic anhydrides with Lewis acid catalysts

An efficient mixed-anhydride method for the synthesis of carboxylic esters and lactones using benzoic anhydride having electron withdrawing substituent(s) is developed by the promotion of Lewis acid catalysts. In the presence of a catalytic amount of TiCl₂(ClO₄)₂, various carboxylic esters are prepared in high yields through the formation of the corresponding mixed-anhydrides from 3,5-bis(trifluoromethyl)benzoic anhydride and carboxylic acids. The combined catalyst consisting of TiCl₂(ClO₄)₂ together with chlorotrimethylsilane functions as an effective catalyst for the synthesis of carboxylic esters from free carboxylic acids and alcohols with 4-(trifluoromethyl)benzoic anhydride. Various macrolactones are prepared from the free ω-hydroxycarboxylic acids by the combined use of 4-(trifluoromethyl)benzoic anhydride and titanium(IV) catalysts together with chlorotrimethylsilane under mild reaction conditions. The lactonization of trimethylsilyl ω-(trimethylsiloxy)carboxylates using 4-(trifluoromethyl)benzoic anhydride is also promoted at room temperature in the presence of a catalytic amount of TiCl₂(ClO₄)₂. An 8-membered ring lactone, a synthetic intermediate of cephalosporolide D, is successfully synthesized according to this mixed-anhydride method using 4-(trifluoromethyl)benzoic anhydride by the promotion of a catalytic amount of Hf(OTf)₄.     

Study of the thermal degradability of poly(α-methylstyrene) with modified end groups

To induce degradabilities in polymers in response to environmental conditions, endm odification reactions of poly(α-methylstyrene) (PMS) derivatives were carried out. 2-Phenylallyl halide derivatives such as 2-phenylallyl bromide, 2-(p-tolyl)allyl bromide, and α-trifluoromethylstyrene were found to be suitable end-modification agents. For example, the ω-2-phenylallyl-PMS derivative was prepared with almost quantitative functionality by the reaction of the living PMS derivative with 2-phenylallyl bromide. In a similar way, ω-3,3-difluoro-2-phenylallyl- and ω-2-(4-toly)allyl-PMS derivatives were synthesized. Based on thermogravimetric analysis, the onset of the degradation temperature of the endmodified PMS derivatives decreased in the following order: ω-hydrogen- > ω-3,3-difluoro-2-phenylallyl- > ω-2-phenylallyl- > ω-2-(p-tolyl)allyl-PMS. Actually, the onset temperature of ω-2-(p-tolyl)allyl-PMS derivatives was 50°C lower than that of ω-H-PMS derivatives. These results indicate that the active species is produced effectively at the endunsaturated bond, which initiates depolymerization of the polymer at rather low temperatures. Therefore, it is concluded that a 2-phenylallyl substituent at the end of the PMS chain induces effective degradation through a radical mechanism.     

Total Synthesis of Cyclothialidine

A total synthesis of cyclothialidine ( 1 ), a new DNA gyrase inhibitor isolated from Streptomyces filipinensis, is described. The synthetic concept was tested by preparing the lactone 13 (Scheme 2) which contains the characteristic bicyclic core entity of 1 . Key features of the synthesis of 1 are: preparation of 3,5-dihydroxy-2,6-dimethylbenzoic acid ( 23 ) from 3,5-dihydroxybenzoic acid ( 19 ) by two consecutive Mannich aminomethylation/hydrogenation sequences; benzylic N-bromosuccinimide bromination of an ester derivative 25 thereof and its subsequent coupling with Boc-Ser-Cys-OMe ( 11 ); cyclization of the ω-hydroxy acid 29 29 to the 12-membered lactone 30 using preferably Mitsunobu conditions; completion of the peptidic side chains of 1 using Boc strategy (Scheme 4). Optically pure cis-N-(tert-butoxycarbonyl)-3-hydroxy-L -proline ((–)- 14 ) was obtained by resolution of the racemate via an efficient reaction sequence containing a lipase-catalyzed enantiospecific acetate hydrolysis (Scheme 3). The structure of natural 1 was confirmed by comparison with the synthetic material. The synthetic route described provides also easy access to analogues of 1 , e.g., via the intermediate 30 .     

Polyesters by lipase-catalyzed polycondensation of unsaturated and epoxidized long-chain α,ω-dicarboxylic acid methyl esters with diols

Long-chain, symmetrically unsaturated α,ω-dicarboxylic acid methyl esters (C₁₈, C₂₀, C₂₆) were obtained by the catalytic metathetical condensation of 9-decenoic, 10-undecenoic, and 13-tetradecenoic acid methyl esters, respectively, with the homogeneous Grubbs catalyst bis(tricyclohexyl phosphine) benzylidene ruthenium dichloride dissolved in methylene chloride. The dicarboxylic acid esters were epoxidized chemoenzymatically with H₂O₂/methyl acetate with Novozym 435^®, an immobilized lipase B from Candida antarctica. Polyesters from symmetrically unsaturated or epoxidized α,ω-dicarboxylic acid methyl esters with 1,3-propanediol or 1,4-butanediol, respectively, were achieved by enzymatic polycondensation with the same biocatalyst applied. With 1,3-propanediol as a substrate, the linear unsaturated and epoxidized polyesters had molecular weights of 1950–3300 g/mol and melting points of 47–75 °C, whereas with 1,4-butanediol as a substrate, the resulting polyesters showed higher molecular weights, 7900–11,600 g/mol, with similar melting points of 55–74 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1601–1609, 2001     

Synthesis of 2-alkyl-2-(3-cyanopyridin-2-ylthio)propionic acids

Derivatives of 2-alkyl-2-mercaptopropionic acid were synthesized based on the substituted 3-cyanopyridin-2(1H)-thiones. The synthesis was carried out by the heating of a mixture of thione, alkyl methyl ketone, and chloroform in the presence of a base. The reaction proceeds readily for acetone, whereas alkyl methyl ketones require a prolonged heating in the presence of a phase-transfer catalyst. Methyl esters were prepared from the acids obtained. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1967–1970, October, 2007.     

Alkylated styrene ionomers with variable length spacers. I. Synthesis

Two analogous series of ionomer precursors based on 4-substituted styrene copolymers were prepared with substituents R = -(CH_2)nCO₂Me (n = 1, 5, 10), or R = -O(CH₂)_nCO₂Me (n = 1, 4, 10), and degrees of substitution from 10 to 15 mol%. The synthesis of the alkyl series compounds involved either chloromethylation of polystyrene or bromoalkylation via lithiation of a styrene-4-bromostyrene copolymer, followed by conversion to the nitriles. Methyl esters were then produced by reaction of the nitriles with methanol/HCl gas. The ether series compounds were obtained directly by reacting a styrene-4-hydroxystyrene copolymer with the methyl esters of the corresponding ω-bromoaliphatic carboxylic acids in a Williamson ether-type synthesis.     

Nucleosides and nucleotides. 2. Synthesis of both anomers of 1-(5'-O-phosphoryl-2'-deoxy-D-ribofuranosyl)-2(1H)-pyridone

The two anomeric 1-(2′-deoxy-D -ribofuranosyl)-2(1H)-pyridones 6 and 7 were synthesized from 2-pyridone and 3,5-di-(O-p-toluoyl)-2-deoxy-D -ribofuranosyl chloride ( 2 ) via the di-O-p-toluoyl derivatives 3 and 4 using the mercuric halide procedure. Phosphorylation of the nucleosides 6 and 7 by bis-(2,2,2-trichloroethyl)-chlorophosphate gave the phosphate esters 8 and 9 together with some 2-(bis-[2,2,2-trichloroethyl]-phosphoryloxy)-pyridine 10 , which proved to be very labile. Structure and configuration of compounds 6 to 9 were established by spectral methods, the configurations being derived from the chemical shifts of the sugar protons and the splitting patterns of the anomeric protons (‘triplet-quartet rule’). The specific rotations of 3 , 4 , 6 , 7 , 8 and 9 show that the three pairs of anomers represent exceptions to Hudson's rule of isorotation. Reductive removal of the trichloroethyl groups in 8 and 9 with zinc proceeds stepwise, yielding the phosphoro-diesters 13 and 14 and the two desired anomeric 5′-nucleotides 15 and 16 . These latter were purified and characterised as the ammonium salts. Enzymatic cleavage by the 5′-nucleotidase of Crotalus adamanteus venom took place only in the ‘natural’ β-series. The ‘unnatural’ α-anomers were resistent to the enzyme. The structure of 10 was established by spectral methods and confirmed by synthesis.     

Esters phosphoriques cycliques ou non cycliques de quelques O-isopropylidène-1,2-α-D-pentofurannoses. Communication préliminaire

Cyclic and acyclic phosphate esters of some 1,2-O-isopropylidene-α-D -pentofuranoses When treated with monophenyl phosphorodichloridate, 1,2-O-isopropylidene-α-D -xylofuranose gave the two possible, isolable isomers of the corresponding 3,5-cylic phenylphosphate. Upon phosphorylation of the same sugar derivative using bis (2,2,2-trichloroethyl) phosphorochloridate only one isomer was formed. The same situation obtained when preparing 1,2-O-isopropylidene-α-D -ribofuranose-3,5-cyclic phenylphosphate. The synthesis of a new kind of sugar phosphate with a branched-chain unsaturated sugar moiety namely the trans-3-deoxy-3-C-cyanomethylene-1,2-O-isopropylidene-D -erytho-pentofuranose 5-bis(2,2,2-trichloroethyl) phosphate is also described.     

GC—MS analysis of carboxylic acids in petroleum after esterification with fluoroalcohols

The GC–MS characteristics of carboxylic acid esters prepared from fluorine-containing alcohols were compared to those of methyl esters. The GC retention of 2,2,2-trifluoroethyl (TFE) esters was less than, and 2,2,3,3,4,4,4-heptafluoro-1-butyl (HFB) esters was approximately equivalent to that of methyl esters. Mass spectra of TFE and HFB aliphatic esters show significantly more intense molecular and key fragment ions than those of methyl esters. Also, owing to their significantly higher molecular weights, TFE or HFB ester molecular ions and most fragment ions of interest occur at significantly higher m/z values than most potential interfering ions. Data for about 70 individual TFE and HFB esters are reported. Application of the methodology to a petroleum-derived carboxylic acid concentrate resulted in identification of straight chain, isoprenoid, methyl-substituted straight chain (2-, 3-, 5-,10-, 12-positions along chain), and dimethyl-substituted straight chain acids containing from 11 to 22 carbons. Benzoic acid and homologs with up to 3-carbons in alkyl substitutents were minor components in the sample. The procedure provided for forming TFE and HFB esters from free acids requires less time and effort than a previously reported method, while retaining its capability for achieving essentially quantitative conversion. Free hydroxyl groups in alcohols and phenols are converted to trifluoroacetate esters concurrently with formation of TFE/HFB carboxylic acid esters. The reaction products, including compounds with two functional groups (diacids, salicylic acid, etc.), chromatograph well on conventional nonpolar GC stationary phases.     

Synthesis of bi- and tricyclic acrylates in the presence of boron trifluoride etherate

The addition of acrylic acid to bicyclo[2.2.1]heptene hydrocarbons and tricyclo[5.2.1.0^2,6]deca-3,8-diene catalyzed with BF₃·O(C₂H₅)₂ was studied and bi- and tricyclic esters of acrylic acid were synthesized that were reactive monomers for preparation of macromolecular compounds.