Dual catalytic performance of arene-ruthenium amine complexes for norbornene ring-opening metathesis and methyl methacrylate atom-transfer radical polymerizations

Arene ruthenium(II) complexes bearing the cyclic amines RuCl₂(η⁶-p-cymene)(pyrrolidine)] ( 1 ), [RuCl₂(η⁶-p-cymene)(piperidine)] ( 2 ), and [RuCl₂(η⁶-p-cymene)(peridroazepine)] ( 3 ) were successfully synthesized. Complexes 1 – 3 were fully characterized by means of Fourier transform infrared, UV–visible, and NMR spectroscopy, elemental analysis, cyclic voltammetry, computational methods, and one of the complexes was further studied by single crystal X-ray crystallography. These compounds were evaluated as catalytic precursors for ring-opening metathesis polymerization (ROMP) of norbornene (NBE) and atom-transfer radical polymerization (ATRP) of methyl methacrylate (MMA). NBE polymerization via ROMP was evaluated using complexes 1 – 3 as precatalysts in the presence of ethyl diazoacetate (EDA) under different [NBE]/[EDA]/[Ru] ratios, temperatures (25 and 50°C), and reaction times (5–60 min). The highest yields of polyNBE were obtained with [NBE]/[EDA]/[Ru] = 5000/28/1 for 60 min at 50°C. MMA polymerization via ATRP was conducted using 1 – 3 as catalysts in the presence of ethyl-α-bromoisobutyrate (EBiB) as initiator. The catalytic tests were evaluated as a function of the reaction time using the initial molar ratio of [MMA]/[EBiB]/[Ru] = 1000/2/1 at 95°C. The increase in molecular weight as function of time indicates that complexes 1–3 were able to mediate the MMA polymerization with an acceptable rate and some level of control. Differences in the rate of polymerization were observed in the order 3 > 2 > 1 for the ROMP and ATRP.     

Carbenoid polycondensation with telechelic polyethers having dichloroacetic acid ester groups

Poly(ethylene oxide) [poly(EO)], with number-average molecular weights (M_ns) of 1000 and 2000, and poly(tetrahydrofuran) [poly(THF)] with M_ns of 1000 and 2000, possessing dichloroacetic acid ester end groups ( 1 , and 2 , respectively) were prepared from precursor diols by esterification with dichloroacetyl chloride in the presence of pyridine. 1 and 2 were subjected to the reaction with copper metal in DMSO to produce the corresponding segmented polyethers containing fumarate/maleate groups within the main chain ( 3 and 4 , respectively), through a polycondensation of carbalkoxy carbenoid intermedlates generated via α, α-dichloro elimination from the end groups of 1 and 2 . The radical polymerization of styrene in the presence of 3 and 4 produced network copolymers consisting of poly (EO) or poly(THF) and polystyrene segments. © 1994 John Wiley & Sons, Inc.     

Synthesis of amphiphilic copolymer brushes: Poly(ethylene oxide)‐graft‐polystyrene

A well‐defined amphiphilic copolymer brush with poly(ethylene oxide) as the main chain and polystyrene as the side chain was successfully prepared by a combination of anionic polymerization and atom transfer radical polymerization (ATRP). The glycidol was first protected by ethyl vinyl ether to form 2,3‐epoxypropyl‐1‐ethoxyethyl ether and then copolymerized with ethylene oxide by the initiation of a mixture of diphenylmethylpotassium and triethylene glycol to give the well‐defined polymer poly(ethylene oxide‐co‐2,3‐epoxypropyl‐1‐ethoxyethyl ether); the latter was hydrolyzed under acidic conditions, and then the recovered copolymer of ethylene oxide and glycidol {poly(ethylene oxide‐co‐glycidol) [poly(EO‐co‐Gly)]} with multiple pending hydroxymethyl groups was esterified with 2‐bromoisobutyryl bromide to produce the macro‐ATRP initiator [poly(EO‐co‐Gly)_(ATRP). The latter was used to initiate the polymerization of styrene to form the amphiphilic copolymer brushes. The object products and intermediates were characterized with ¹H NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, Fourier transform infrared, and size exclusion chromatography in detail. In all cases, the molecular weight distribution of the copolymer brushes was rather narrow (weight‐average molecular weight/number‐average molecular weight < 1.2), and the linear dependence of ln[M₀]/[M] (where [M₀] is the initial monomer concentration and [M] is the monomer concentration at a certain time) on time demonstrated that the styrene polymerization was well controlled. This method has universal significance for the preparation of copolymer brushes with hydrophilic poly(ethylene oxide) as the main chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4361–4371, 2006     

Preparation of the amphiphilic macro‐rings of poly(ethylene oxide) with multi‐polystyrene lateral chains and their extraction for dyes

A novel method for synthesis of amphiphilic macrocyclic graft copolymers with multi‐polystyrene lateral chains is suggested, by combination of anionic ring‐open polymerization (AROP) with atom transfer radical polymerization (ATRP). The anionic ring‐opening copolymerization of ethylene oxide (EO) and ethoxyethyl glycidyl ether (EEGE) was carried out first using triethylene glycol and diphenylmethylpotassium (DPMK) as coinitiators; the monomer reactivity ratio of them are r_1(EO) = 1.20 ± 0.01 and r_2(EEGE) = 0.76 ± 0.02 respectively. The obtained linear well‐defined α,ω‐dihydroxyl poly(ethylene oxide) with pendant protected hydroxylmethyls (l‐poly(EO‐co‐EEGE)) was cyclized by reaction with tosyl chloride (TsCl) in the presence of solid KOH. The crude cyclized product containing the extended linear chain polymer was hydrolyzed and then purified by treat with α‐CD. The pure cyclic copolymer with multipendant hydroxymethyls [c‐poly(EO‐co‐Gly)] was esterified by reaction with 2‐bromoisobutyryl bromide, and then used as macroinitiators to initiate polymerization of styrene (St), and a series of amphiphilic macrocyclic grafted copolymers composed of a hydrophilic PEO as ring and hydrophobic polystyrene as side chains (c‐PEO‐g‐PS) were obtained. The intermediates and final products were characterized by GPC, NMR and MALDI‐TOF in detail. The experimental results confirmed that c‐PEO‐g‐PS shows stronger conjugation ability with the dyes than the corresponding comb‐PEO‐g‐PS. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5824–5837, 2007     

Vinyl Polymerization Initiated by Ceric Ion–Ethyl Cellosolve Redox System in Aqueous Nitric Acid

Abstract

Polymerizations of methyl methacrylate (MMA) and acrylonitrile (AN) were carried out in aqueous nitric acid at 30°C with the redox initiator system ammonium ceric nitrate-ethyl cellosolve (EC). A short induction period was observed as well as the attainment of a limiting conversion for polymerization reactions. The consumption of ceric ion was first order with respect to Ce(IV) concentration in the concentration range (0.2–0.4) × 10^?2 M, and the points at higher and lower concentrations show deviations from a linear fit. The plots of the inverse of pseudo-first-order rate constant for ceric ion consumption, (k ¹)^?1 vs [EC]^?1, gave straight lines for both the monomer systems with nonzero intercepts supporting complex formation between Ce(IV) and EC. The rate of polymerization increases regularly with [Ce(IV)] up to 0.003 M, yielding an order of 0.41, then falls to 0.0055 M and again shows a rise at 0.00645 M for MMA polymerization. For AN polymerization, R _p shows a steep rise with [Ce(IV)] up to 0.001 M, and beyond this concentration R _p shows a regular increase with [Ce(IV)], yielding an order of 0.48. In the presence of constant [NO^? ₃], MMA and AN polymerizations yield orders of 0.36 and 0.58 for [Ce(IV)] variation, respectively. The rates of polymerization increased with an increase in EC and monomer concentrations: only at a higher concentration of EC (0.5 M) was a steep fall in R _p observed for both monomer systems. The orders with respect to EC and monomer for MMA polymerization were 0.19 and 1.6, respectively. The orders with respect to EC and monomer for AN polymerization were 0.2 and 1.5, respectively. A kinetic scheme involving oxidation of EC by Ce(IV) via complex formation, whose decomposition gives rise to a primary radical, initiation, propagation, and termination of the polymeric radicals by biomolecular interaction is proposed. An oxidative termination of primary radicals by Ce(IV) is also included.     

Stabilization of G‐Quadruplex DNA,Inhibition of Telomerase Activity and Live Cell Imaging Studies of Chiral Ruthenium(II) Complexes

Telomerase inhibition is an attractive strategy for cancer chemotherapy. In the current study, we have synthesized and characterized two chiral ruthenium(II) complexes, namely, Λ‐[Ru(phen)₂(p‐MOPIP)]²⁺ and Δ‐[Ru(phen)₂(p‐MOPIP)]²⁺, where phen is 1,10‐phenanthroline and p‐MOPIP is 2‐(4‐methoxyphenyl)‐imidazo[4,5f][1,10]phenanthroline. The chiral selectivity of the compounds and their ability to discriminate quadruplex DNA were investigated by using UV/Vis, fluorescence spectroscopy, circular dichroism spectroscopy, fluorescence resonance energy transfer melting assay, polymerase chain reaction stop assay and telomerase repeat amplification protocol. The results indicate that the two chiral compounds could induce and stabilize the formation of antiparallel G‐quadruplexes of telomeric DNA in the presence or absence of metal cations. We report the remarkable ability of the two complexes Λ‐[Ru(phen)₂(p‐MOPIP)]²⁺ and Δ‐[Ru(phen)₂(p‐MOPIP)]²⁺ to stabilize selectively G‐quadruplex DNA; the former is a better G‐quadruplex binder than the latter. The anticancer activities of these complexes were evaluated by using the MTT assay. Interestingly, the antiproliferative activity of Λ‐[Ru(phen)₂(p‐MOPIP)]²⁺ was higher than that of Δ‐[Ru(phen)₂(p‐MOPIP)]²⁺, and Λ‐[Ru(phen)₂(p‐MOPIP)]²⁺ showed a significant antitumor activity in HepG2 cells. The status of the nuclei in Λ/Δ‐[Ru(phen)₂(p‐MOPIP)]²⁺‐treated HepG2 cells was investigated by using real‐time living cell microscopy to determine the effects of Λ/Δ‐[Ru(phen)₂(p‐MOPIP)]²⁺ on intracellular accumulation. The results show that Λ/Δ‐[Ru(phen)₂(p‐MOPIP)]²⁺ can be taken up by HepG2 cells and can enter into the cytoplasm as well as accumulate in the nuclei; this suggests that the nuclei were the cellular targets of Λ/Δ‐[Ru(phen)₂(p‐MOPIP)]²⁺.     

The polymerization of oxiranes with the α-chlorobenzyl methyl sulfide–antimony pentachloride initiator system

α-Thiomethoxyphenylmethylium hexachloroantimonate was prepared from α-chlorobenzyl methyl sulfide and antimony pentachloride and studied by visible spectroscopy. The salt is unstable at room temperature and used as in situ initiator for the polymerization of oxiranes in dichloromethane. Propylene oxide (PO) and cyclohexene oxide (CHO) were used as oxiranes. The microstructure of PO polymer is amorphous by ¹³C-NMR. The initiator was more effective for the polymerization of CHO than for that of PO.     

Phase-Transfer Catalysis: Free-Radical Polymerization of Methyl Methacrylate using K2S2O8-Quaternary Ammonium Salt Catalyst System. A Kinetic Study

Abstract

The kinetics of phase-transfer-agent-assisted free-radical polymerization of methyl methacrylate using K₂S₂O₈ as the water-soluble initiator and triethylbenzylammonium chloride (TEBA) as the phase-transfer catalyst (PTC) was investigated in toluene-water biphase media at 60°C. The effect of varying [MMA], [K₂S₂O₈], [TEBA], [H⁺], the ionic strength of the medium, and the temperature on the rate of polymerization (R _p) was studied. R _p was found to be proportional to [MMA]², [K₂S₂O₈]¹, and [TEBA]^0.5. Based on the kinetic results, a mechanism involving initiation of polymerization by phase-transferred S₂O₈ ^2- and termination by Q⁺ (quaternary ammonium ion) is proposed.     

Diverse structures and magnetism of cobalt(II) and manganese(II) compounds with mixed azido and carboxylato bridges induced by methylpyridinium carboxylates

Herein we present a systematic study of the structures and magnetic properties of six coordination compounds with mixed azide and zwitterionic carboxylate ligands, [M(N₃)₂(2‐mpc)] (2‐mpc=N‐methylpyridinium‐2‐carboxylate; M=Co for 1 and Mn for 2 ), [M(N₃)₂(4‐mpc)] (4‐mpc=N‐methylpyridinium‐4‐carboxylate; M=Co for 3 and Mn for 4 ), [Co₃(N₃)₆(3‐mpc)₂(CH₃OH)₂] ( 5 ), and [Mn₃(N₃)₆(3‐mpc)₂] ( 6 ; 3‐mpc=N‐methylpyridinium‐3‐carboxylate). Compounds 1 – 3 consist of one‐dimensional uniform chains with (μ‐EO‐N₃)₂(μ‐COO) triple bridges (EO=end‐on); 5 is also a chain compound but with alternating [(μ‐EO‐N₃)₂(μ‐COO)] triple and [(EO‐N₃)₂] double bridges; Compound 4 contains two‐dimensional layers with alternating [(μ‐EO‐N₃)₂(μ‐COO)] triple, [(μ‐EO‐N₃)(μ‐COO)] double, and (EE‐N₃) single bridges (EE=end‐to‐end); 6 is a layer compound in which chains similar to those in 5 are cross‐linked by a μ₃‐1,1,3‐N₃ azido group. Magnetically, the three Co^II compounds ( 1 , 3 , and 5 ) all exhibit intrachain ferromagnetic interactions but show distinct bulk properties: 1 displays relaxation dynamics at very low temperature, 3 is an antiferromagnet with field‐induced metamagnetism due to weak antiferromagnetic interchain interactions, and 5 behaves as a noninnocent single‐chain magnet influenced by weak antiferromagnetic interchain interactions. The magnetic differences can be related to the interchain interactions through π–π stacking influenced by different substitution positions in the ligands and/or different magnitudes of intrachain coupling. All of the Mn^II compounds show overall intrachain/intralayer antiferromagnetic interactions. Compound 2 shows the usual one‐dimensional antiferromagnetism, whereas 4 and 6 exhibit different weak ferromagnetism due to spin canting below 13.8 and 4.6 K, respectively.     

Aqueous polymerization of acrylamide initiated by cerium (IV)–ethylenediamine tetraacetic acid redox system

Ethylenediamine tetraacetic acid (EDTA) terminated polyacrylamide was obtained by using the EDTA–cerium(IV) ammonium nitrate [Ce(IV)] redox initiator in the aqueous polymerization of acrylamide. The polymerization behaviors as a function of the concentration of Ce(IV), EDTA, and acrylamide as well as temperature were studied. The consumption rate of cerium(IV) depends a first-order reaction on the ceric ion concentration ([Ce(IV)]). The complex formation constant (K) and disproportionation constant (k_d) of Ce(IV)–EDTA chelated complex are 1.67 × 10⁴ and 3.77 × 10^?3, respectively. The rate dependences of polymerization on monomer concentration and EDTA concentration both follow a second-order reaction in the run of initial monomer concentration ([M]_i) equal to 0.2 mol dm^?3. The number average molecular weight increases linearly with the ratio of [M]_i/[Ce(IV)]_i. The mechanism and kinetics for the polymerization was proposed. The kinetic parameters involved were determined. © 1992 John Wiley & Sons, Inc.     

Kinetic study of azidopentaammine cobalt(III) complex as photoinitiator and termination agent of N‐vinylpyrrolidone radical polymerization

N‐Vinylpyrrolidone polymerization photoinitiated at 365 and 546 nm by azidopentaammine cobalt(III) {[Co(NH₃)₅N₃]²⁺} was investigated at room temperature in an argon atmosphere. By excitation into the ligand to metal charge transfer (LMCT), the cobalt complex showed an efficient photoredox process leading to the formation of a cobalt(II) and an azide radical (N, Φ_photoredox = 0.24). The same process was found to occur by excitation into the ligand field band with a low but not negligible quantum yield (Φ_photoredox = 0.016). Two different domains were clearly present when the plot of the rate of polymerization as a function of the cobalt(III) complex was studied; for [Co(III)] < 2.0 × 10⁻⁴ M, the termination step mainly involved a mutual annihilation of growing radicals whereas an oxidative termination was present in the range of 2.0 × 10⁻⁴ M < [Co(III)] < 1.0 × 10⁻³ M. Within the former domain the rate of polymerization (R_p ) varied with the first power of the monomer concentration and with the square root of the absorbed light intensity while for the latter domain the R_p was proportional to the monomer concentration and absorbed light intensity. Further investigations using the viscosity‐average molecular weight data allowed us to corroborate the proposed polymerization mechanism. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3997–4005, 2000     

Simple route for synthesis of H‐shaped copolymers

The H‐shaped copolymers, [poly(L ‐lactide)]₂polystyrene [poly(L ‐lactide)]₂, [(PLLA)₂PSt(PLLA)₂] have been synthesized by combination of atom transfer radical polymerization (ATRP) with cationic ring‐opening polymerization (CROP). The first step of the synthesis is ATRP of St using α,α′‐dibromo‐p‐xylene/CuBr/2,2′‐bipyridine as initiating system, and then the PSt with two bromine groups at both chain ends (Br–PSt–Br) were transformed to four terminal hydroxyl groups via the reaction of Br–PSt–Br with diethanolamine in N,N‐dimethylformamide. The H‐shaped copolymers were produced by CROP of LLA, using PSt with four terminal hydroxyl groups as macroinitiator and Sn(Oct)₂ as catalyst. The copolymers obtained were characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2794–2801, 2006     

Metal compounds in free-radical processes. III. Polymerization of acrylonitrile initiated by copper (II) nitrate in presence or absence of triphenylphosphine

The bulk polymerization of acrylonitrile (AN) initiated by copper (II) nitrate, Cu(II), in the absence of light has been studied. The rate of the AN polymerization may be expressed in the Cu(II) concentration range from 5 × 10^?4 to 1 × 10^?1 mole 1.^?1 by the equation, R_p = k₅[Cu(II)]^0.68, where k₅ = K_AN[AN]/(1 + K_AN[AN]). From the spectrophotometric measurements the values of 0.70 l./mole and 0.08 l, mole were obtained for the equilibrium constant at 20 and 60°C, respectively, K_AN = [C]/[AN]-[Cu(II)], corresponding to the formation of the complex C from acrylonitrile and copper (II) nitrate. An addition of triphenylphosphine (C₆H₅)₃P into the polymerization system reduces R_p, and no polymerization takes place at all provided [(C₆H₅)₃P]/[Cu-(II)] ≧ 5. The retardation effect of (C₆H₅)₃P on the polymerization of AN initiated by Cu(II) is attributed to a competitive reaction of Cu(II) with (C₆H₅)₃P in which Cu(II) is reduced and the product of this reduction CuNO₃·2(C₆H₅)₃P is inactive with respect to the polymerization of AN.     

Kinetics of the reaction of nitric oxide with polypyridylamine iron(II) complexes

The reactions of three polypyridylamine ferrous complexes, [Fe(TPEN)]²⁺, [Fe(TPPN)]²⁺, and [Fe(TPTN)]²⁺, with nitric oxide (NO) (where TPEN = N,N,N′,N′-tetrakis(2-pyridylmethyl)ethylenediamine, TPPN = N,N,N′,N′-tetrakis(2-pyridylmethyl)-1,2-propylenediamine, and TPTN = N,N,N′,N′-tetrakis(2-pyridylmethyl)trimethylenediamine) were investigated. The first two complexes, which are spin-crossover systems, presented second-order rate constants for complex formation reactions (k_f) of 8.4 × 10³ and 9.3 × 10³ M^?1 s^?1, respectively (pH 5.0, 25 °C, I = 0.1 M). In contrast, the [Fe(TPTN)]²⁺ complex, which is in low-spin ground state, did not show any detectable reaction with NO. k_f values are lower than those of high-spin Fe(II) complexes, such as [Fe(EDTA)]^2? (EDTA = ethylenediaminetetraacetate) and [Fe(H₂O)]²⁺, but higher than low-spin Fe(II) complexes, such as [Fe(CN)₅(H₂O)]^3? and [Fe(bipyridine)₃]²⁺. The release of NO from the [Fe(TPEN)NO]²⁺ and [Fe(TPPN)NO]²⁺ complexes were also studied, showing the values 15.6 and 17.7 s^?1, respectively, comparable to the high-spin aminocarboxylate analogs. A mechanism is proposed based on the spin-crossover behavior and the geometry of these complexes and is discussed in the context of previous publications.     

Kinetics of polymerization of styrene-in-water microemulsions

The kinetics of polymerization of styrene-in-water microemulsions was investigated using dilatometry. From plots of percentage conversion versus time, the rate of polymerization, R _p, was determined. From log-log plots of R _p versus styrene and initiator [2,2′-azobis(isobutyronitrile), AIBN] concentrations the following relationship was established: R _p∝ [styrene]^1.2 [AIBN]^0.46. These exponents are similar to those predicted by the theory of emulsion polymerization. The results also showed a rapid conversion in the initial period (interval 1) followed by a slower rate at longer times (interval 2). It was suggested that in interval 1, the main process in nucleation of the microemulsion droplets, whereas in interval 2 propagation is the more dominant factor. The rapid polymerization of microemulsions is consistent with their structure, whereby very small droplets with flexible interfaces are produced. Received: 2 March 1999 Accepted in revised form: 10 May 1999     

Vinyl polymerization: Kinetics of Ce(IV)–acetophenone-initiated polymerization of acrylonitrile in acetic–sulfuric acid mixtures

The polymerization of acrylonitrile (M) initiated by the Ce(IV)–acetophenone (AP) redox pair has been studied in acetic–sulfuric acid mixtures in a nitrogen atmosphere. The rate of polymerization is proportional to [M]^3/2, [AP]^1/2 and [Ce(IV)]^1/2. The rate of disappearance of ceric ion,–R_Ce, is proportional to [AP], [M], and [Ce(IV)]. The effect of certain salts, solvent, acid and temperature on both the rates have been investigated. A suitable kinetic scheme has been proposed, and the composite rate constants k_p ²(k/k/_t) and k₀/k_i are reported.     

Synthesis and characterization of linear ABC triblock copolymer of ethylene oxide,methyl methacrylate,and styrene

A well‐defined linear ABC triblock copolymer of ethylene oxide (EO), methyl methacrylate (MMA), and styrene (St) was prepared by sequential living anionic and photo‐induced charge transfer polymerization (CTP) using p‐aminophenol as parent compound. In the first step, the diblock copolymer of PEO‐b‐PMMA with a protected aniline end group at PEO end was prepared by initiating of phenoxo‐anion the polymerization of EO and MMA successively, then the diblock copolymer of PEO‐b‐PMMA via deprotection of aniline at PEO end constituted a binary initiation system with benzophenone (BP) by charge transfer complex mechanism to initiate the polymerization of St under UV‐irradiation. The GPC and NMR measurements support that in copolymerization, either in the first or second step, neither homopolymer nor side reactions, such as chain transfer or chain termination, was found. The effect of the concentration of PEO_a‐b‐PMMA and St, and the polarity of solvent on the polymerization rate (R_p) of CTP is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 825–833, 1999     

Heptane-soluble homogeneous zirconocene catalyst: Synthesis of a single diastereomer,polymerization catalysis,and effect of silica supports

Bis(1-indenyl)-di[1′S, 2′R, 5′S)-methoxy]silane ( 1 ) was converted into a mixture of corresponding ansa-diastereomeric zirconocenes. Further purification afforded a single dia-stereomer, di[(1′S, 2′R, 5′S)-methoxy] silylene-bis[η⁵-1(R, R)-(+)-indenyl] dichlorozirconium ( 2 ), which is optically active and hydrocarbon soluble. Extremely rapid ethylene, propylene, and ethylene-hexene polymerizations were observed both in toluene and n-heptane solutions; for instance, at 50°C, activity for ethylene polymerization reaches ～ 1.5×10¹⁰ (g of PE/((mol of Zr) · [C₂H₄] · h). The “bare” zirconocenium ion generated from 2/TIBA/Ph₃CB(C₆F₅)₄ exhibits unusual polymerization behaviors; the polymerization activity increases monotonically with temperature of polymerization (T_p) up to a conventional polymerization condition (50–70°C), and the ¹³C NMR study shows that the isotactic poly-propylene obtained has fairly high [mmmm] methyl pentad distributions at high T_p (?25°C with [mmmm] ～ 0.93–0.75) and a perfect stereoregularity at low T_p (?0°C with [mmmm] > 0.99). The catalyst precursors 2 and Et(Ind)₂ZrCl₂ ( 3 ) supported on silica by different approaches produced poly(olefins) of different molecular weights and stereoregularities, and a methylaluminokane and Ph₃CB(C₆F₅)₄ free silica-supported zirconocene system was found to be activated by triisobutylaluminum. © 1995 John Wiley & Sons, Inc.     

Synthesis of 4μ‐PS2PEO2, 4μ‐PS2PCL2, 4μ‐PI2PEO2, and 4μ‐PI2PCL2 star‐shaped copolymers by the combination of glaser coupling with living anionic polymerization and ring‐opening polymerization

4μ‐A₂B₂ star‐shaped copolymers contained polystyrene (PS), poly(isoprene) (PI), poly(ethylene oxide) (PEO) or poly(ε‐caprolactone) (PCL) arms were synthesized by a combination of Glaser coupling with living anionic polymerization (LAP) and ring‐opening polymerization (ROP). Firstly, the functionalized PS or PI with an alkyne group and a protected hydroxyl group at the same end were synthesized by LAP and then modified by propargyl bromide. Subsequently, the macro‐initiator PS or PI with two active hydroxyl groups at the junction point were synthesized by Glaser coupling in the presence of pyridine/CuBr/N,N,N ′,N ″,N ″‐penta‐methyl diethylenetri‐amine (PMDETA) system and followed by hydrolysis of protected hydroxyl groups. Finally, the ROP of EO and ε‐CL monomers was carried out using diphenylmethyl potassium (DPMK) and tin(II)‐bis(2‐ethylhexanoate) (Sn(Oct)₂) as catalyst for target star‐shaped copolymers, respectively. These copolymers and their intermediates were well characterized by SEC, ¹H NMR, MALDI‐TOF mass spectra and FT‐IR in details. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Open spaces and molecular motions of polyether-based network polymers probed by positron annihilation

The lifetimes of positrons have been measured for network polymers based on polyethers. From the temperature dependence of the lifetime of ortho-positronium (o-Ps), τ₃, for the network polymer of poly(ethylene oxide-co-propylene oxide) [P(EO/PO)], an onset temperature for limited local motions of molecules, T_γ, and the glass transition temperature, T_g, were determined to be 57 and 201 K, respectively. For the network polymer of poly[EO-co-2-(2-methoxyethoxy)ethyl glycidyl ether] [P(EO/MEEGE)], T_γ and T_g were determined to be 57 and 185 K, respectively. For both specimens, above 270 K, the observed linear temperature dependence of τ₃ was attributed to the thermal expansion of open spaces in a liquid state. In the temperature range between T_γ and 270 K, for the P(EO/MEEGE) network, τ₃ was longer and its intensity was smaller than those for the P(EO/PO) network. These results were attributed to the increase in the size of open spaces for the P(EO/MEEGE) network polymer and the blocking of these regions by motions of side chains and chain ends. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1919–1925, 1998