Oxidation of palladium(II) by hexacyanoferrate(III) in aqueous ethanoic acid: a mechanistic study

The oxidation of Pd^II by Fe(CN) ₆ ^3– has been studied in 55% MeCO₂H–H₂O containing 4.0 mol dm^–3 HCl, the oxidation being made possible by altering redox potentials. The active species of Pd^II and Fe(CN) ₆ ^3– are PdCl ₃ ^– and H₂Fe(CN) ₆ ^– , respectively. A possible mechanism is proposed and verified, and the reaction constants involved have been evaluated.     

Oxidation of chromium(III) by alkaline hexacyanoferrate(III)

Alkaline hexacyanoferrate(III) oxidation of freshly prepared solutions of Cr^III (pH>12) at 27°C follows the rate law, Equation 1:

Kinetics and mechanism of oxidation of thallium(I) by 12-tungstocobaltate(III)in aqueous hydrochloric acid

The reaction between Tl^I and [Co^IIIW₁₂O₄₀]^5– proceeds in two one-electron steps, involving formation of unstable Tl^II in a slow first step followed by reaction with oxidant in a fast step. The reaction rate is unaffected by the [H⁺] as protonation equilibria are not involved with either reactant, whereas the accelerating effect of chloride ion is due to the formation of an active chloro-complex of the reductant, TlCl₃ ^2–. Increasing the ionic strength and decreasing the relative permittivity of the medium increases the rate of the reaction which is attributed to the formation of an outer sphere complex between the reactants. The activation parameters were also determined and the values support the proposed mechanism.     

Diacetoxylation of conjugated dienes with thallium(III) acetate in acetic acid

The reaction of conjugated dienes such as 1,3-butadiene, isoprene, 2,3-dimethyl-1,3-butadiene, 2,5-dimethyl-2,4-hexadiene, 1,3-cyclopentadiene, and 1,3-cyclohexadiene, with thallium(III)acetate in acetic acid at 10–65° for 0.5–15 hr affords an isomeric mixture of the corresponding diacetoxyalkenes (1,2- and 1,4-addition products) in 10–92% yields. The 1,2-addition products are predominantly formed in all cases examined except the case of 1,3-cyclopentadiene. The reaction is assumed to proceed through acetoxythallation and dethallation steps, the latter step being accompanied and/or followed by an attack of acetoxyl group. An initial attack of thallium moiety is proposed to occur mainly at C-1 and C-2 carbons in the cases of linear terminal dienes and cyclic dienes, respectively.     

Oxidation of trans-alloocimene by thallium(III) nitrate

We have obtained 2,7-dimethoxy-2,7-dimethyl-3,5-octadiene by the action of thallium(III) nitrate on trans-allo-ocimene.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1087–1089, May, 1990.     

A kinetic and mechanistic study of oxidation of arsenic(III) by hexacyanoferrate(III) in aqueous ethanoic acid

The kinetics of oxidation of As^IIIby Fe(CN)₆ ^3– has been studied spectrophotometrically in 60% AcOH–H₂O containing 4.0moldm^–3HCl. The oxidation is made possible by the difference in redox potentials. The reaction is first order each in [Fe(CN)₆ ^3–] and [As^III]. Amongst the initially added products, Fe(CN)₆ ^4– retards the reaction and As^Vdoes not. Increasing the acid concentration at constant chloride concentration accelerates the reaction. At constant acidity increasing chloride concentration increases the reaction rate, which reaches a maximum and then decreases. H₂Fe(CN)₆ ^–, is the active species of Fe(CN)₆ ^3–, while AsCl₅ ^2– in an ascending portion and AsCl₂ ⁺ in a descending portion are considered to be the active species of As^III. A suitable reaction mechanism is proposed and the reaction constants of the different steps involved have been evaluated.     

Oxidation of aromatic bis-amides by thallium (III) trifluoroacetate

Aromatic 1,2-bisamides undergo thallium (III) promoted oxidative intramolecular cyclization to generate new 5-membered heterocyclic rings. Formation of $\text{para}$-quinone was shown to be a minor pathway in one case.     

Oxidation of L-aspartic acid and L-glutamic acid by manganese(III) ions in aqueous sulphuric acid,acetic acid,and pyrophosphate media: A kinetic study

Kinetics of oxidation of L-aspartic acid and L-glutamic acid by manganese(III) ions have been studied in aqueous sulphuric acid, acetic acid, and pyrophosphate media. Manganese(III) solutions were prepared by known electrolytic/chemical methods in the three media. The nature of the oxidizing species present in manganese(III) solutions was determined by spectrophotometric and redox potential measurements. The reaction shows a variable order in [manganese(III)]_o: the order changes from two to one as the reactive oxidizing species changes from an aquo ionic form to a complex form. There is a first-order dependence of the rate on [amino acid]_o in all the three media while the other common features include an inverse dependence each on [H⁺] and on [manganese(II)]. Effects of varying ionic strength and solvent composition were studied. Added anions such as pyrophosphate, fluoride, or chloride alter the reaction rate and mechanism by changing the formal redox potential of Mn(III)-Mn(II) couple. Activation parameters have been evaluated using the Arrhenius and Eyring plots. Mechanisms consistent with the kinetic data have been proposed and discussed. © 1995 John Wiley & Sons, Inc.     

Extraction separation of thallium (III) from thallium (I) with n-octylaniline

A novel method is developed for the extraction separation of thallium(III) from salicylate medium with n-octylaniline dissolved in toluene as an extractant. The optimum conditions have been determined by making a critical study of weak acid concentration, extractant concentration, period of equilibration and effect of solvent on the equilibria. The thallium (III) from the pregnant organic phase is stripped with acetate buffer solution (pH 4.7) and determined complexometrically with EDTA. The method affords the sequential separation of thallium(III) from thallium(I) and also commonly associated metal ions such as Al(III), Ga(III), In(III), Fe(III), Bi(III), Sb(III) and Pb(II). It is used for analysis of synthetic mixtures of associated metal ions and alloys. The method is highly selective, simple and reproducible. The reaction takes place at room temperature and requires 15-20 min for extraction and determination of thallium(III).     

Kinetics of oxidation of pyridoxine by anodically generated manganese(III) in aqueous acetic acid medium

Summary Manganese(III) acetate was prepared by the electrolytic oxidation of Mn(OAc)₂ in aqueous AcOH. The electro-generated manganese(III) species was characterised by spectroscopic and redox potential studies. The kinetics of oxidation of pyridoxine (PRX) by manganese(III) in aqueous AcOH were investigated and is first order with respect to [Mn^III]. The effects of varying [Mn^III], [PRX], added manganese(II), pH and added anions such as AcO⁻, F⁻, Cl⁻ and ClO _inf4 ^sup− and SO _inf4 ^sup2− were studied. The rate decreased slowly with increasing [H⁺] up to 0.2 mol dm⁻³ and increased steeply thereafter. The orders in [PRX] and [Mn^II] were unity and inverse fractional, respectively, in both low and high [H⁺] ranges. The dependence of reaction rate on temperature was studied and activation parameters were computed from Arrhenius and Eyring plots. A mechanism consistent with the observed results is proposed and discussed.     

Oxidation of 4-chromanones with thallium(III) nitrate

Treatment of 4-chromanones 1a-g with thallium(III) nitrate in acidic methanol results mainly in dehydrogenation, whereas α-methoxylation and/or Taylor-McKillop rearrangement predominate in trimethyl orthoformate. The mechanistic features of these oxidations are briefly discussed.     

Tetrachloroaurate(III) oxidation of thallium(I)

Summary The complementary reaction between Tl^I and AuCl _inf4 ^sup– was studied in a 3.0 mol dm^–3 HCl medium. The active species of oxidant and reductant were found to be HAuCl₄ and TlCl _inf2 ^sup– , respectively. A mechanism involving these reactive species is proposed, in agreement with the results obtained.     

Ruthenium(III) catalyzed oxidation of hexacyanoferrate(II) by periodate in aqueous alkaline medium

Ruthenium(III) catalyzed oxidation of hexacyanoferrate(II) by periodate in alkaline medium is assumed to occurvia substrate-catalyst complex formation followed by the interaction of oxidant and complex in the rate-limiting stage and yield the products with regeneration of catalyst in the subsequent fast step. The reaction exhibits fractional order in hexacyanoferrate(II) and first-order unity each in oxidant and catalyst. The reaction constants involved in the mechanism are derived.     

Radiation induced exchange reaction between thallium(I) and thallium(III)—Comparison of sulfuric acid and perchiloric acid solution

The rate constant of radiation induced exchange reaction between thallium(I) and thallium(III) ions has been studied for elucidating the mechanisms which are responsible for (T1(II) intermediates or bridging groups (SO ₄ ^2– ) in sulfuric acid and perchloric acid solutions. It was found that the radiation induced exchange reaction is accelerated by the sulfate ion, and the rate of the thallium(II)-thallium(I) reaction is faster than that of the thallium(II)-thallium(III) process in perchloric acid solution.     

The oxidation of thallium(I) by selenious acid

A new and simple method for the quantitative determination of thallium based on the oxidation of TI(I) to TI(III) by selenious acid has been described. The precipitated selenium is weighed directly. Furthermore, the thallic hydroxide obtained by the addition of excess alkali to the filtrate is dissolved in HCl and determined iodometrically. The excess selenious acid in the filtrate is also estimated iodometrically or by gravimetric method after reduction to metallic selenium. Under the specified operative conditions the results are reproducible and accurate within the limits of experimental error.     

Influence of thallium(I) and thallium(III) on parameters of oscillating chemical reaction in a bromate-cerium(III,IV)-malonic acid-sulfuric acid system

The influence of thallium(I) and thallium(III) on the parameters of the Belousov-Zhabotinskii oscillating chemical reaction in the bromate-cerium(III, IV)-malonic acid-sulfuric acid system was studied. As a result of the addition of thallium(I) and thallium(III), the oscillation parameters change in the same way, which cannot be explained by the complexation of these ions with the bromide only. It was found that during the oscillating reaction, thallium(I) can be oxidized by bromine-containing compounds and thallium(III) reduced by the transformation products of malonic and bromomalonic acids. A scheme of action of a thallium(III)/thallium(I) two-electron redox pair in the oscillating chemical reaction studied has been proposed.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 23, No. 1, pp. 106–111, January–February, 1987.