A high pressure differential thermal analysis apparatus

A high pressure differential thermal analysis apparatus is described which is capable of operation in the pressure range from 1-600 atm of nitrogen gas and at temperatures from 25 to 500°C. Use of the apparatus is illustrated by the deaquation reactions of CuCl₂·2H₂0 and CoSO₄·7H₂O at pressures from 1 to 69 atm.     

Analysis of lattice thermal conductivities of rare-earth sulphides at high temperatures

The lattice thermal conductivities of rare-earth sulphides have been analyzed at high temperatures in the frame of the two-mode conduction of phonons for the first time by studying the total lattice thermal conductivities of GdS and LaS in the entire temperature range 100–1000 K. The temperature exponents for the three-phonon scattering relaxation rates are reported for the transverse as well as for the longitudinal phonons. The separate percentage contributions due to the transverse and longitudinal phonons towards the total lattice thermal conductivities of the above samples have similarly been studied. The role of the four-phonon processes too has been included in the present investigation.     

Measuring structural inhomogeneity of a helical conjugated polymer at high pressure and temperature

We report on X‐ray scattering measurements of helical poly[9,9‐bis(2‐ethylhexyl)‐fluorene‐2,7‐diyl] by mapping the sample with 10 μm spatial resolution from 0.3 GPa to 36 GPa. We follow the strongest 00l reflection, which moves toward higher scattering angles with pressure indicating planarization of helical polyfluorene. Lateral inhomogeneity is increased for >10 GPa concomitant with the solidification of the pressure transmitting medium (a 4:1 mixture of methanol and ethanol). We also follow the 00l reflection with increasing temperature at the constant pressure of 4.3 GPa in neon. We observe a sharp shift toward higher scattering angles indicative of a phase transition at 167–176 °C. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 392–396     

A thermostated coupled apparatus for the simultaneous determination of adsorption isotherms and differential enthalpies of adsorption at high pressure and high temperature

In order to assess and improve the quality of high pressure and temperature adsorption isotherms and differential enthalpies of adsorption on microporous and mesoporous materials, a specific thermostated device comprising a differential heat flow calorimeter coupled with a home-built manometric system has been built. The differential heat flow calorimeter is a Tian Calvet Setaram C80 model which can be operated isothermally, the manometric system is a stainless steel homemade apparatus. The thermostated coupled apparatus allows measurements for pressure up to 2.5?MPa and temperature from 303 to 423?K. Reliability and reproducibility were established by measuring adsorption isotherms on a benchmark sorbent (Filtrasorb F400). A detailed experimental study of the adsorption of pure carbon dioxide and methane has been made on activated carbons (Filtrasorb F400 and EcoSorb); a new procedure for determining the differential enthalpies of adsorption based on the stepwise method is also proposed. The error in the determination of the amount adsorbed is about 3.6%, and the error in the determination of the differential enthalpies of adsorption is 4%.     

HgWO4 synthesized at high pressure and temperature

Crystals of mercury(II) tungstate(VI), HgWO₄, were grown in sealed gold tubes under an Ar atmosphere at 300 MPa and 973 K. The monoclinic crystal structure (C2/c) of HgWO₄ consists of zigzag chains of edge‐sharing WO₆ octahedra running along the c axis and layers of very distorted corner‐sharing HgO₆ octahedra in the bc plane. The Hg atom lies on an inversion centre and the W atom is on a twofold axis. No structural effects which can be ascribed to the high pressure used in the synthesis were found.     

Melting and dissociation of ammonia at high pressure and high temperature

Raman spectroscopy and synchrotron x-ray diffraction measurements of ammonia (NH(3)) in laser-heated diamond anvil cells, at pressures up to 60 GPa and temperatures up to 2500 K, reveal that the melting line exhibits a maximum near 37 GPa and intermolecular proton fluctuations substantially increase in the fluid with pressure. We find that NH(3) is chemically unstable at high pressures, partially dissociating into N(2) and H(2). Ab initio calculations performed in this work show that this process is thermodynamically driven. The chemical reactivity dramatically increases at high temperature (in the fluid phase at T > 1700 K) almost independent of pressure. Quenched from these high temperature conditions, NH(3) exhibits structural differences from known solid phases. We argue that chemical reactivity of NH(3) competes with the theoretically predicted dynamic dissociation and ionization.     

An interferometric method for measurement of the thermal conductivities of solids

An interferometric method is described for the determination of small deformations of a solid surface when heated by a c.w. gaussian laser beam, from which temperature increase and thermal parameters can be derived. A discussion of the method is presented and applied to the measurement of thermal conductivity, for two different situations of an unrestrained or restrained sample heated with a c.w. laser. Experimental results are finally given for a semiconductor crystal of Si.

---

Zusammenfassung Eine interferometrische Methode zur Bestimmung kleiner, beim Erhitzen mit einem Laserstrahl auftretenden Deformationen einer festen Oberfläche, aus denen die Temperaturerhöhung und thermische Parameter abgeleitet werden können, wird beschrieben. Die Methode wird diskutiert und ihre Eignung zur Bestimmung der Wärmeleitfähigkeit bei zwei verschiedenen Situationen einer mit einem c.w. Laser erhitzten unrestrained oder restrained Probe aufgezeigt. Experimentelle Ergebnisse werden für einen Silicium-Halbleiterkristall mitgeteilt.

---

ë . ë, . .

     

An apparatus for accurately measuring solubilities of gases in liquids at elevated temperatures and pressures

An apparatus for measuring solubilities of gases in liquids at elevated temperatures and pressures has been constructed. Using this apparatus, the solubilities of N₂ and CO₂ in some solvents have been determined in the temperature range between 20 and 230°C, and at pressures up to 130 atm. The experimental results obtained generally agree well with literature values. It is shown that this apparatus is reliable; attainment of equilibria needs only about 5 hours; precision of the measurements is ±0.2° o.     

Radiation-induced polymerization of hexafluoropropylene at high temperature and pressure

The radiation-induced polymerization of hexafluoropropylene was studied in the pressure and temperature ranges of 4,500–15,000 atm. and 100–230°C., respectively. Retardation was a serious problem; data thought to apply to the unretarded polymerization are summarized below. At 1,500 rad/hr. the polymerization rate was 15%/hr. at 230°C. and 15,000 atm. The activation enthalpy and volume are 9.5 kcal./mole and ?10 cc./mole, respectively. The rate varies as the square root of the radiation intensity. The largest intrinsic viscosity of the polymer is 2.0 dl./g.; values increase with temperature and pressure. At 130°C. and 10,000 atm. the intrinsic viscosity was the same at two radiation intensities.     

Investigations of the thermal degradation of polymer metal precursors for high temperature superconducting ceramics

Polymer metal precursors are characterized by thermal degradation and mass spectrometric thermal analysis while the HTS phases are characterized by X-ray diffraction and measurements of the electrical resistance. It is to be assumed that the methacrylic acid groups of the polymer does not only form salts with the metal ions but also complexes.     

A new calorimeter for measuring rapidly thermal conductivities of the organic liquids and the electrically conducting liquids

A new calorimeter for measuring thermal conductivity of liquids has been constructed. It is wholly automatic under the computer control. The time of measurement is 1 s and the temperature rise due to heating is within 1°C. Six organic liquids and six aqueous solutions of electrolytes were employed as reference standards. The instrument was calibrated at 25°C. Its accuracy is better then 1% with a precision of about 0.2%.     

A high pressure electrical conductivity apparatus

A high pressure electrical conductivity (EC) apparatus. capable of operation at pressures from 1 to 170 atm in the temperature range from 25 to 500°C, is described. The effects of the sample holder geometry, pressure, and sample packing on the resulting EC curves are given. Operation of the apparatus is illustrated by the deaquation reactions of BaCI₂·2H₂0.     

高压加热条件下油煤浆黏度测定的研究

高压、加热条件下油煤浆的黏度,对煤直接液化工艺中煤浆预热器和反应器的设计非常重要.……     

Thermal decomposition of high-energy density materials at high pressure and temperature

High-energy density materials (HEDMs) are being investigated for use as propellants in rocket, air-breathing, and combined-cycle applications. These types of materials may be attractive alternatives to conventional propellants because of their high heat of combustion, density, and high strain energy. Because advanced propulsion systems may operate at very high pressure and temperature (>25 atm and temperatures exceeding 500 °C), the thermal decomposition of individual HEDMs is of interest to future fuel system designers. A laboratory-scale flow reactor was used to subject small amounts (approximately 1 ml) of deoxygenated HEDM to controlled conditions of temperature and residence-time-at-temperature at constant pressure (34 atm) in the liquid or supercritical phase. The reactor was 316 stainless steel HPLC tubing. Using an in-line analytical system, as well as off-line chromatographic analysis of products, the thermal stability of the parent material, as well as the thermal fragmentation products of each HEDM was measured. Some of the candidate materials tested (dimethyl-2-azidoethylamine (DAMEZ), quadricyclane, and bicyclopropylidene (BCP)) showed only marginal thermal stability with major decomposition occurring before 400 °C (3 s residence time). Other candidate materials (JP-10, RP-1, RG-1, RJ-6, and RJ-7) showed excellent thermal stability: little decomposition even at 600 °C. Results show the pyrolytic stability of candidate materials relative to each other, and provided insights to the mechanisms of thermal decomposition for specific fuel candidates.     

Phase transitions of LiAlO2 at high pressure and high temperature

This work presents a comprehensive study on phase transitions in LiAlO₂ system at high pressures and temperatures (0.5-5.0 GPa and 300-1873 K, respectively), as well as the phase stability for polymeric phases of LiAlO₂ in the studied P-T space by X-ray diffraction (XRD). Besides the previously described polymorphic hexagonal α-phase, orthorhombic β-phase and tetragonal δ-phase, a possible new phase of LiAlO₂ was observed after the tetragonal γ-LiAlO₂ sample was treated at 5.0 GPa and 389 K. The stable regimes of these high-pressure phases were defined through the observation of coexistence points of the polymeric phases. Our results revealed that LiAlO₂ could experience structural phase transitions from γ-LiAlO₂ to its polymorphs at lower pressures and temperatures compared to the reported results. Hexagonal α-LiAlO₂ with highly (003) preferential orientation was prepared at 5.0 GPa and 1873 K.     

An apparatus for measuring Thomson scattering from an inductively coupled plasma

An experimental arrangement is presented which has been proven capable of measuring Thomson scattering from an inductively coupled plasma (ICP). This system has been shown to reject stray light to a sufficient extent that useful scattering signals can be measured as near as 0.3 nm from the incident laser wavelength. In this paper, design considerations are discussed and a viable experimental system is described. Preliminary Thomson scattering results are presented.     

Transparent, hydrophobic composite aerogels with high mechanical strength and low high-temperature thermal conductivities

A facile one-step polymer-incorporation sol-gel process, together with a surface modification and an ambient pressure drying processes, was developed to prepare silica-poly(vinylpyrrolidone) composite aerogels. These composite aerogels are with high hydrophobicity (static contact angle >120 degrees), good mechanical strength (Young's modulus of bending >30 MPa), and low high-temperature thermal conductivity (0.063 W/m-K at 300 degrees C), which are critical characteristics for practical applications of aerogels, particularly in energy saving areas, for long-term usage and large scale production.