Point charges and atomic multipole moments of Si and O in amorphous SiO2 for the estimation of the electrostatic field and potential

In order to estimate atomic multipole moments (AMMs) and charges in the model of amorphous SiO₂ a hybrid B3LYP functional with 30% of the Hartree-Fock Hamiltonian in the exchange part with the 88-31G*(Si)/8-411G*(O) basis set and the CRYSTAL06 package are used. A 192-atomic unit cell of amorphous SiO₂ is chosen as a model, the calculations with which agree well with the experimental static factor of neutron scattering. The second optimized model of amorphous SiO₂ (a-SiO₂) with a smaller number of defects is prepared with the use of the VASP package and full optimization of the initial a-SiO₂ model. For both models the atomic charges and AMMs are calculated (up to the fourth order included) and their approximation is performed. The approximation quality is compared for these models and with a model for crystalline systems whose AMMs were previously calculated. The conclusions are drawn about the applicability of charge and AMM estimates within the approaches such as the embedded cluster.     

Geometry optimization and electronic structures of molecules H_3AXAH_3

The geometries of molecules H_3AXAH_3(X=O,S,Se and A=C,Si)have been optimizedusing STO-3G ab initio calculations and gradient method and the results are in good agreement withreported experimental values.From the STO-3G optimized geometries,we have also calculated theelectronic structures of these molecules using 4-31G and 6-31G basis sets to obtain the MO energies.atomic net charges and dipole moments.The ionization potentials calculated by 6-31G basis set are ingood agreement with experimental values.     

Calculation of molecular quadrupole moments and a demonstration of the importance of overlap densities in the theory of polyatomic molecules

A computational method for calculating quadrupole moments from molecular wave functions in a Slater orbital basis set is described. Using both IEHT and CNDO wave functions quadrupole moments for a series of polyatomic molecules are calculated. They are compared with experimental results and the IEHT wave functions are found to give agreement with experiment while CNDO wave functions do not. The importance of bicentric densities (overlap densities) in the calculation of multipole moments is shown. This is followed by a discussion of the usefulness of these wave functions for a quantitative characterization of the electronic structure of large molecules.     

Base stacking in cytosine dimer. A comparison of correlated ab initio calculations with three empirical potential models and density functional theory calculations

Ab initio MP2/6-31G* interaction energies were calculated for more than 80 geometries of stacked cytosine dimer. Diffuse polarization functions were used to properly cover the dispersion energy. The results of ab initio calculations were compared with those obtained from three electrostatic empirical potential models, constructed as the sum of a Lennard-Jones potential (covering dispersion and repulsion contributions) and the electrostatic term. Point charges and point multipoles of the electrostatic term were also obtained at the MP2/6-31G* level of theory. The point charge MEP model (atomic charges derived from molecular electrostatic potential) satisfactorily reproduced the ab initio data. Addition of π-charges localized below and above the cytosine plane did not affect the calculated energies. The model employing the distributed multipole analysis gave worse agreement with the ab initio data than the MEP approach. The MP2 MEP charges were also derived using larger sets of atomic orbitals: cc-pVDZ, 6-311 + G(2d, p), and aug-cc-pVDZ. Differences between interaction energies calculated using these three sets of point charges and the MP2/6-31G* charges were smaller than 0.8 kcal/mol. The correlated ab initio calculations were also compared with the density functional theory (DFT) method. DFT calculations well reproduced the electrostatic part of interaction energy. They also covered some nonelectrostatic short-range effects which were not reproduced by the empirical potentials. The DFT method does not include the dispersion energy. This energy, approximated by an empirical term, was therefore added to the DFT interaction energy. The resulting interaction energy exhibited an artifact secondary minimum for a 3.9-4.0 vertical separation of bases. This defect is inherent in the DFT functionals, because it is not observed for the Hartree-Fock + dispersion interaction energy.© 1996 John Wiley & Sons, Inc.     

Accurate modeling of the intramolecular electrostatic energy of proteins

The (?, ψ) energy surface of blocked alanine (N-acetyl–N′-methyl alanineamide) was calculated at the Hartree-Fock (HF)/6-31G* level using ab initio molecular orbital theory. A collection of six electrostatic models was constructed, and the term electrostatic model was used to refer to (1) a set of atomic charge densities, each unable to deform with conformation; and (2) a rule for estimating the electrostatic interaction energy between a pair of atomic charge densities. In addition to two partial charge and three multipole electrostatic models, this collection includes one extremely detailed model, which we refer to as nonspherical CPK. For each of these six electrostatic models, parameters—in the form of partial charges, atomic multipoles, or generalized atomic densities—were calculated from the HF/6-31G* wave functions whose energies define the ab initio energy surface. This calculation of parameters was complicated by a problem that was found to originate from the locking in of a set of atomic charge densities, each of which contains a small polarization-induced deformation from its idealized unpolarized state. It was observed that the collective contribution of these small polarization-induced deformations to electrostatic energy differences between conformations can become large relative to ab initio energy differences between conformations. For each of the six electrostatic models, this contribution was reduced by an averaging of atomic charge densities (or electrostatic energy surfaces) over a large collection of conformations. The ab initio energy surface was used as a target with respect to which relative accuracies were determined for the six electrostatic models. A collection of 42 more complete molecular mechanics models was created by combining each of our six electrostatic models with a collection of seven models of repulsion + dispersion + intrinsic torsional energy, chosen to provide a representative sample of functional forms and parameter sets. A measure of distance was defined between model and ab initio energy surfaces; and distances were calculated for each of our 42 molecular mechanics models. For most of our 12 standard molecular mechanics models, the average error between model and ab initio energy surfaces is greater than 1.5 kcal/mol. This error is decreased by (1) careful treatment of the nonspherical nature of atomic charge densities, and (2) accurate representation of electrostatic interaction energies of types 1—2 and 1—3. This result suggests an electrostatic origin for at least part of the error between standard model and ab initio energy surfaces. Given the range of functional forms that is used by the current generation of protein potential functions, these errors cannot be corrected by compensating for errors in other energy components. © 1995 by John Wiley & Sons, Inc.     

Multipole electrostatic model for MNDO-like techniques with minimal valence spd-basis sets

We report an implementation of an atomic multipole model (up to quadrupole) for calculating the electrostatic properties of molecules based on electron densities derived from MNDO-like NDDO-based semiempirical MO calculations with minimal s,p,d valence basis sets. The results were validated by a comparison of the calculated values of the molecular electrostatic potential with those obtained from fine grain numerical integrations (both with AM1*), B3LYP/6–31G(d) and MP2/6–31G(d). The DFT and ab initio potentials can be reproduced remarkably well (mean unsigned error <2 kcal mol⁻¹ e⁻¹) using simple linear regression equations to correct the AM1* (multipole) results. Dedicated to Prof. Karl Jug on the occasion of his 65th birthday     

Atomic dipole moments calculated using analytical molecular second-moment gradients

We have implemented analytical second-moment gradients for Hartree-Fock and multiconfigurational self-consistent-field wave functions. The code is used to calculate atomic dipole moments based on the generalized atomic polar tensor (GAPT) formalism [Phys. Rev. Lett. 62, 1469 (1989)], and the proposal of Dinur and Hagler (DH) for the calculation of atomic multipoles [J. Chem. Phys. 91, 2949 (1989)]. Both approaches display smooth basis-set convergence toward a well-defined basis-set limit and give reasonable electron correlation effects on the calculated atomic properties. However, the atomic charges and atomic dipole moments obtained from the GAPT partitioning scheme are unable to provide even qualitatively meaningful molecular quadrupole moments for some molecules, and thus the atomic multipole moments calculated in this scheme cannot be considered well suited for analyzing the electron density in molecules and for calculating intermolecular interaction energies. In contrast, the DH approach gives atomic charges and dipole moments that by definition exactly reproduce the molecular quadrupole moments. The approach of DH is, however, restricted to planar molecules and thus suffers from not being applicable to molecules of arbitrary shape. Both the GAPT and DH approaches give rather poor results for octupole and hexadecapole moments, indicating that at least atomic quadrupole moments are required for an accurate representation of the molecular charge distribution in terms of atomic electric moments.     

Correlated molecular and multicenter multipole moments in ground and excited states from multiple reference double-excitation configuration interaction calculations

Correlated molecular mulitpole moments and compact correlated cumulative atomic multipole moment (CCAMM) representation of molecular charge distribution in ground as well as in excited states have been derived directly from multiple reference double-excitation configuration interaction (MRD-CI) wave functions for BH and H₂CO molecules using several extended basis sets with multiple polarization functions. This approach extends previously introduced uncorrelated and correlated CAMMs, and allows obtaining inexpensive modeling of electrostatic effects involving molecules in excited electronic states. © 1992 by John Wiley & Sons, Inc.     

Halogen bonding: a theoretical study based on atomic multipoles derived from quantum theory of atoms in molecules

Atomic multipole moments derived from quantum theory of atoms in molecules are used to study halogen bonds in dihalogens (with general formula YX, in which X refers to the halogen directly interacted with the Lewis base) and some molecules containing C–X group. Multipole expansion is used to calculate the electrostatic potential in a vicinity of halogen atom (which is involved in halogen bonding) in terms of atomic monopole, dipole, and quadrupole moments. In all the cases, the zz component of atomic traceless quadrupole moments (where z axis taken along Y–X or C–X bonds) of the halogens plays a stabilizing role in halogen bond formation. The effects of atomic monopole and dipole moments on the formation of a halogen bond in YX molecules depend on Y and X atoms. In Br₂ and Cl₂, the monopole moment of halogens is zero and has no contribution in electrostatic potential and hence in halogen bonding, while in ClBr, FBr, and FCl it is positive and therefore stabilize the halogen bonds. On the other hand, the negative sign of dipole moment of X in all the YX molecules weakens the corresponding halogen bonds. In the C–X-containing molecules, monopole and dipole moments of X atom are negative and consequently destabilize the halogen bonds. So, in these molecules the quadrupole moment of X atom is the only electrostatic term which strengthens the halogen bonds. In addition, we found good linear correlations between halogen bonds strength and electrostatic potentials calculated from multipole expansion.     

Experimental X-ray charge density studies on the binary carbonyls Cr(CO)6, Fe(CO)5, and Ni(CO)4

The experimental charge densities in the binary carbonyls Cr(CO)(6) (1), Fe(CO)(5) (2), and Ni(CO)(4) (3) have been investigated on the basis of high-resolution X-ray diffraction data collected at 100 K. The nature of the metal-ligand interactions has been studied by means of deformation densities and by topological analyses using the Atoms in Molecules (AIM) approach of Bader. A detailed comparison between the experimental results and theoretical results from previous work and from gas-phase and periodic DFT/B3LYP calculations shows excellent agreement, both on a qualitative and quantitative level. An examination of the kappa-restricted multipole model (KRMM) for Cr(CO)(6), using theoretically derived structure factors, showed it to provide a somewhat worse fit than a model with freely refined kappa' values. The experimental atomic graphs for the metal atoms in 2 and 3 were found to be dependent on the multipole model used for that atom. In the case of compound 2, restriction of the multipole populations according to idealized site symmetry of D(3h) gave an atomic graph in essential agreement with the theoretical gas-phase study. For compound 3, all multipole models fail to reproduce the atomic graph obtained from the theoretical gas-phase study. The atomic quadrupole moments for the C atoms in all compounds were consistent with significant pi back-donation from the metal atoms.     

Atomic multipoles: Electrostatic potential fit,local reference axis systems,and conformational dependence

Currently, all standard force fields for biomolecular simulations use point charges to model intermolecular electrostatic interactions. This is a fast and simple approach but has deficiencies when the electrostatic potential (ESP) is compared to that from ab initio methods. Here, we show how atomic multipoles can be rigorously implemented into common biomolecular force fields. For this, a comprehensive set of local reference axis systems is introduced, which represents a universal solution for treating atom‐centered multipoles for all small organic molecules and proteins. Furthermore, we introduce a new method for fitting atomic multipole moments to the quantum mechanically derived ESP. This methods yields a 50–90% error reduction compared to both point charges fit to the ESP and multipoles directly calculated from the ab initio electron density. It is shown that it is necessary to directly fit the multipole moments of conformational ensembles to the ESP. Ignoring the conformational dependence or averaging over parameters from different conformations dramatically deteriorates the results obtained with atomic multipole moments, rendering multipoles worse than partial charges. © 2012 Wiley Periodicals, Inc.     

Topological analysis of the molecular charge density and impact sensitivy models of energetic molecules

Important explosives of practical use are composed of nitroaromatic molecules. In this work, we optimized geometries and calculated the electron density of 17 nitroaromatic molecules using the Density Functional Theory (DFT) method. From the DFT one-electron density matrix, we computed the molecular charge densities, thus the electron densities, which were then decomposed into electric multipoles located at the atomic sites of the molecules using the distributed multipole analysis (DMA). The multipoles, which have a direct chemical interpretation, were then used to analyze in details the ground state charge structure of the molecules and to seek for correlations between charge properties and sensitivity of the corresponding energetic material. The DMA multipole moments do not present large variations when the size of the Gaussian basis set is changed; the largest variations occurred in the range 10-15% for the dipole and quadrupole moments of oxygen atoms. The charges on the carbon atoms of the aromatic ring of each molecule become more positive when the number of nitro groups increases and saturate when there are five and six nitro groups. The magnitude and the direction of the dipole moments of the carbon atoms, indicators of site polarization, also depend on the nature of adjacent groups, with the largest dipole value being for C-H bonds. The total magnitude of the quadrupole moment of the aromatic ring carbon atoms indicates a decrease in the delocalized electron density due to an electron-withdrawing effect. Three models for sensitivity of the materials based on the DMA multipoles were proposed. Explosives with large delocalized electron densities in the aromatic ring of the component molecule, expressed by large quadrupole values on the ring carbon atoms, correspond to more insensitive materials. Furthermore, the charges on the nitro groups also influence the impact sensitivity.     

The effects of atomic multipole moments obtained by the potential-derived method on hydrogen bonding

A potential-derived atomic multipole method called the cumulative potential-derived atomic multipole method is developed, with which electrostatic atomic multipole moments are derived by fitting the molecular electric potential in a cumulative way. It is applied to the hydrides of N , O , F , S , Cl , and methanol and the hydrogen-bonded dimers formed between them. The relationship between atomic multipole moments and molecular charge distributions is found. The structures calculated with Buckingham's electrostatic model are in good agreement with experiments. The phenomena of nonlinear structures of most H -bonded complexes—the deviations of symmetry axes of electron donors from H bonds—and correct distinguishing between two alternative structures are attributed to atomic dipole and quadrupole moments. Compared with other methods, this method has a quantitative and qualitative advantage and simple algorithm. The main conclusion is that the atomic multipole moments play a substantial role, although a potential-derived charge model was deemed sufficient previously. © 1993 John Wiley & Sons, Inc.     

Theoretically Calculated Deformation Density of Small Molecules

Analysis of the theoretical electron deformation density based on EHMO and ab initio calculations has been applied to the simple molecules F₂, H₂O and SO₂ The effects from varied basis sets for such deformation density were sought. The accumulation of electron density between the bonded atoms calculated from EHMO and ab initio methods with STO-3G is generally under-estimated. Such phenomena are significantly improved by using split-valence basis sets e.g. 3–21G and 4–31G. The addition of d polarization functions is apparently important for the sulfur atom in sulfur-related bonding. 3–21G or 3–21G^* basis sets were found to provide not only valuable deformation density distributions of molecules but also comparable orbital energy states with respect to the experimental values.     

Multipolar electrostatics for proteins: Atom–atom electrostatic energies in crambin

Accurate electrostatics necessitates the use of multipole moments centered on nuclei or extra point charges centered away from the nuclei. Here, we follow the former alternative and investigate the convergence behavior of atom‐atom electrostatic interactions in the pilot protein crambin. Amino acids are cut out from a Protein Data Bank structure of crambin, as single amino acids, di, or tripeptides, and are then capped with a peptide bond at each side. The atoms in the amino acids are defined through Quantum Chemical Topology (QCT) as finite volume electron density fragments. Atom‐atom electrostatic energies are computed by means of a multipole expansion with regular spherical harmonics, up to a total interaction rank of L = ?_A+ ?_B + 1 = 10. The minimum internuclear distance in the convergent region of all the 15 possible types of atom‐atom interactions in crambin that were calculated based on single amino acids are close to the values calculated from di and tripeptides. Values obtained at B3LYP/aug‐cc‐pVTZ and MP2/aug‐cc‐pVTZ levels are only slightly larger than those calculated at HF/6‐31G(d,p) level. This convergence behavior is transferable to the well‐known amyloid beta polypeptide Aβ_1–42. Moreover, for a selected central atom, the influence of its neighbors on its multipole moments is investigated, and how far away this influence can be ignored is also determined. Finally, the convergence behavior of AMBER becomes closer to that of QCT with increasing internuclear distance. © 2013 Wiley Periodicals, Inc.     

The natural atomic orbital point charge model for PM3: Multipole moments and molecular electrostatic potentials

The natural atomic orbital/point (NAO-PC) model originally developed to calculate molecular electrostatic potentials (MEPs) and multiple moments based on the AM1 wave function has been extended to PM3. As for AM1, NAO-PC/PM3 reproduces dipole moments calculated by the standard PM3 method very well. There is also a surprisingly good correlation between experimental and calculated quadrupole moments. The MEPs calculated using PM3/NAO-PC are found to be in better agreement with those given by RHF/6-31G* than those obtained from the PM3 wave function using Coulson charges. On the other hand, the NAO-PC model is often slightly worse then the method implemented in MOPAC-ESP. The MEPs calculated using our model based on the PM3 wave function are often in better agreement with those given by RHF/6-31G* than those obtain with AM1. © 1994 by John Wiley & Sons, Inc.     

Atomic properties of selected biomolecules: quantum topological atom types of hydrogen,oxygen, nitrogen and sulfur occurring in natural amino acids and their derivatives

Molecular electron densities are generated at B3LYP/6-311+G(2d,p)//HF/6-31G(d) level for 57 molecules, including one conformation of each naturally occurring amino acid and smaller derived molecules. The electron densities are partitioned into atomic fragments according to the approach of quantum chemical topology (QCT). A set of 547 unique topological atoms is obtained, containing 421 hydrogens, 63 oxygens, 57 nitrogens and 6 sulfurs. Each atom is described by seven properties: volume, kinetic energy, monopole, dipole, quadrupole, octupole and hexadecapole moment. Cluster analysis groups atoms into atom types based on their similarity expressed in the discrete 7D space of atomic properties. Using a separation criterion we distinguish seven hydrogen, six oxygen, two nitrogen and six sulfur atom types.