FTIR studies of the kinetics and mechanism for the reaction of Cl atom with formylchloride

The rate constant for the reaction Cl + CHClO → HCl + CClO was determined from relative decay rates of CHClO and CH₃Cl inthe photolysis of mixtures containing Cl₂ (～1 torr), CH₃Cl (～1 torr), and O₂ (～0.1 torr) in 700 torr N₂. In such mixtures CHClO was generated in situ as a principal product prior to complete consumption of O₂. The value of k(Cl + CHClO)/k(Cl + CH₃Cl) = 1.6 ± 0.2(3σ) combined with the literature value of k(Cl + CH₃Cl) = 4.9 × 10^?13 cm³/molecule sec gives k(Cl + CHClO) = 7.8 × 10^?13 cm³/molecule sec at 298 ± 2 K, in excellent agreement with a previous value of (7.9 ± 1.5) × 10^?13 cm³/molecule sec determined by Sanhueza and Heicklen [J. Phys. Chem., 79 , 7 (1975)]. Thus this reaction is approximately 100 times slower than the corresponding reactions of aldehydes and alkanes with comparable C? H bond energies (≤95 kcal/mol).     

Rate constants for the reactions of chlorine atoms with hydrochloroethers at 298 k and atmospheric pressure

The relative rate technique has been used to determine the rate constants for the reactions Cl + CH₃OCHCl₂ → products and Cl + CH₃OCH₂CH₂Cl → products. Experiments were carried out at 298 ± 2 K and atmospheric pressure using nitrogen as the bath gas. The decay rates of the organic species were measured relative to those of 1,2‐dichloroethane, acetone, and ethane. Using rate constants of (1.3 ± 0.2) × 10^?12 cm³ molecule^?1 s^?1, (2.4 ± 0.4) × 10^?12 cm³ molecule^?1 s^?1, and (5.9 ± 0.6) × 10^?11 cm³ molecule^?1 s^?1 for the reactions of Cl atoms with 1,2‐dichloroethane, acetone, and ethane respectively, the following rate coefficients were derived for the reaction of Cl atoms (in units of cm³ molecule^?1 s^?1) with CH₃OCHCl₂, k= (1.04 ± 0.30) × 10^?12 and CH₃OCH₂CH₂Cl, k= (1.11 ± 0.20) × 10^?10. Errors quoted represent two σ, and include the errors due to the uncertainties in the rate constants used to place our relative measurements on an absolute basis. The rate constants obtained are compared with previous literature data and used to estimate the atmospheric lifetimes for the studied ethers. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 420–426, 2005     

A kinetic and product study of reaction of chlorine atom with CH3CH2OD

The reaction of atomic chlorine with CH₃CH₂OD has been examined using a discharge fast flow system coupled to a mass spectrometer combined with the relative rate method (RR/DF/MS). At 298 ± 2 K, the rate constant for the Cl + CH₃CH₂OD reaction was determined using cyclohexane as a reference and found to be k₃ = (1.13 ± 0.21) × 10^?10 cm³ molecule^?1 s^?1. Mass spectral studies of the reaction products resulted in yields greater than 97% for the combined hydrogen abstraction at the α and β sites (3a + 3b) and less than 3% at the hydroxyl site (3c). As a calibration of the apparatus and the RR/DF/MS technique, the rate constant of the Cl + CH₃CH₂OH reaction was also determined using cyclohexane as the reference, and a value of k₂ = (1.05 ± 0.07) × 10^?10 cm³ molecule^?1 s^?1 was obtained at 298 ± 2 K, which was in excellent agreement with the value given in current literature. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 584–590, 2004     

Kinetics of the reactions of CH3O with Cl and CIO

The kinetics of the reactions CH₃O + Cl → H₂CO + HCl (1) and CH₃O + ClO → H₂CO + HOCl (2) have been studied using the discharge-flow techniques. CH₃O was monitored by laser-induced fluorescence, whereas mass spectrometry was used for the detection or titration of other species. The rate constants obtained at 298 K are: k₁ = (1.9 ± 0.4) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ and k₂ = (2.3 ± 0.3) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. These data are useful to interpret the results of the studies of the reactions of CH₃O₂ with Cl and ClO which, at least partly, produce CH₃O radicals. © 1996 John Wiley & Sons, Inc.     

Kinetics and products of the gas-phase reactions of the OH radical and O3 with allyl chloride and benzyl chloride at room temperature

The kinetics of the gas-phase reactions of allyl chloride and benzyl chloride with the OH radical and O₃ were investigated at 298 ± 2 K and atmospheric pressure. Direct measurements of the rate constants for reactions with ozone yielded values of ??(O₃ + allyl chloride) = (1.60 ± 0.18) × 10^?18 cm³ molecule^?1 s^?1 and ??(O₃ + benzyl chloride) < 6 × 10^?20 cm³ molecule^?1 s^?1. With the use of a relative rate technique and ethane as a scavenger of chlorine atoms produced in the OH radical reactions, rate constants of ??(OH + allyl chloride) = (1.69 ± 0.07) × 10^?11 cm³ molecule^?1 s^?1 and ??(OH + benzyl chloride) = (2.80 ± 0.19) × 10^?12 cm³ molecule^?1 s^?1 were measured. A study of the OH radical reaction with allyl chloride by long pathlength FT-IR absorption spectroscopy indicated that the co-products ClCH₂CHO and HCHO account for ca. 44% of the reaction, and along with the other products HOCH₂CHO, (ClCH₂)₂CO, and CH₂ ? CHCHO account for 84 ± 16% of the allyl chloride reacting. The data indicate that in one atmosphere of air in the presence of NO the chloroalkoxy radical formed following OH radical addition to the terminal carbon atom of the double bond decomposes to yield HOCH₂CHO and the CH₂Cl radical, which becomes a significant source of the Cl atoms involved in secondary reactions. A product study of the OH radical reaction with benzyl chloride identified only benzaldehyde and peroxybenzoyl nitrate in low yields (ca. 8% and ?4%, respectively), with the remainder of the products being unidentified.     

Kinetics of hydroxyl radical reactions with formaldehyde and 1,3,5-trioxane between 290 and 600 K

Absolute rate constants are measured for the reactions: OH + CH₂O, over the temperature range 296–576 K and for OH + 1,3,5-trioxane over the range 292–597 K. The technique employed is laser photolysis of H₂O₂ or HNO₃ to produce OH, and laser-induced fluorescence to directly monitor the relative OH concentration. The results fit the following Arrhenius equations: k (CH₂O) = (1.66 ± 0.20) × 10^?11 exp[?(170 ± 80)/RT] cm³ s^?1 and k(1,3,5-trioxane) = (1.36 ± 0.20) × 10^?11 exp[?(460 ± 100)/RT] cm³ s^?1. The transition-state theory is employed to model the OH + CH₂O reaction and extrapolate into the combustion regime. The calculated result covering 300 to 2500 K can be represented by the equation: k(CH₂O) = 1.2 × 10^?18 T^2.46 exp(970/RT) cm³ s^?1. An estimate of 91 ± 2 kcal/mol is obtained for the first C? H bond in 1,3,5-trioxane by using a correlation of C? H bond strength with measured activation energies.     

Rate coefficients and mechanisms of the reaction of cl‐atoms with a series of unsaturated hydrocarbons under atmospheric conditions

Rate coefficients and/or mechanistic information are provided for the reaction of Cl‐atoms with a number of unsaturated species, including isoprene, methacrolein ( MACR ), methyl vinyl ketone ( MVK ), 1,3‐butadiene, trans‐2‐butene, and 1‐butene. The following Cl‐atom rate coefficients were obtained at 298 K near 1 atm total pressure: k(isoprene) = (4.3 ± 0.6) × 10^?10cm³ molecule^?1 s^?1 (independent of pressure from 6.2 to 760 Torr); k( MVK ) = (2.2 ± 0.3) × 10^?10 cm³ molecule^?1 s^?1; k( MACR ) = (2.4 ± 0.3) × 10^?10 cm³ molecule^?1 s^?1; k(trans‐2‐butene) = (4.0 ± 0.5) × 10^?10 cm³ molecule^?1 s^?1; k(1‐butene) = (3.0 ± 0.4) × 10^?10 cm³ molecule^?1 s^?1. Products observed in the Cl‐atom‐initiated oxidation of the unsaturated species at 298 K in 1 atm air are as follows (with % molar yields in parentheses): CH₂O (9.5 ± 1.0%), HCOCl (5.1 ± 0.7%), and 1‐chloro‐3‐methyl‐3‐buten‐2‐one (CMBO, not quantified) from isoprene; chloroacetaldehyde (75 ± 8%), CO₂ (58 ± 5%), CH₂O (47 ± 7%), CH₃OH (8%), HCOCl (7 ± 1%), and peracetic acid (6%) from MVK ; CO (52 ± 4%), chloroacetone (42 ± 5%), CO₂ (23 ± 2%), CH₂O (18 ± 2%), and HCOCl (5%) from MACR ; CH₂O (7 ± 1%), HCOCl (3%), acrolein (≈3%), and 4‐chlorocrotonaldehyde (CCA, not quantified) from 1,3‐butadiene; CH₃CHO (22 ± 3%), CO₂ (13 ± 2%), 3‐chloro‐2‐butanone (13 ± 4%), CH₂O (7.6 ± 1.1%), and CH₃OH (1.8 ± 0.6%) from trans‐2‐butene; and chloroacetaldehyde (20 ± 3%), CH₂O (7 ± 1%), CO₂ (4 ± 1%), and HCOCl (4 ± 1%) from 1‐butene. Product yields from both trans‐2‐butene and 1‐butene were found to be O₂‐dependent. In the case of trans‐2‐butene, the observed O₂‐dependence is the result of a competition between unimolecular decomposition of the CH₃CH(Cl)? CH(O?)? CH₃ radical and its reaction with O₂, with k_decomp/k_O2 = (1.6 ± 0.4) × 10¹⁹ molecule cm^?3. The activation energy for decomposition is estimated at 11.5 ± 1.5 kcal mol^?1. The variation of the product yields with O₂ in the case of 1‐butene results from similar competitive reaction pathways for the two β‐chlorobutoxy radicals involved in the oxidation, ClCH₂CH(O?)CH₂CH₃ and ?OCH₂CHClCH₂CH₃. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 334–353, 2003     

Gas‐Phase Reaction of Monomethylhydrazine with Ozone: Kinetics and OH Radical Formation

The gas‐phase reaction of monomethylhydrazine (CH₃NH? NH₂; MMH) with ozone was investigated in a flow tube at atmospheric pressure and a temperature of 295 ± 2 K using N₂/O₂ mixtures (3–30 vol% O₂) as the carrier gas. Proton transfer reaction–mass spectrometry (PTR‐MS) and long‐path FT‐IR spectroscopy served as the main analytical techniques. The kinetics of the title reaction was investigated with a relative rate technique yielding k_MMH+O3 = (4.3 ± 1.0) × 10^?15 cm³ molecule^?1 s^?1. Methyldiazene (CH₃N?NH; MeDia) has been identified as the main product in this reaction system as a result of PTR‐MS analysis. The reactivity of MeDia toward ozone was estimated relative to the reaction of MMH with ozone resulting in k_MeDia+O3 = (2.7 ± 1.6) × 10^?15 cm³ molecule^?1 s^?1. OH radicals were followed indirectly by phenol formation from the reaction of OH radicals with benzene. Increasing OH radical yields with increasing MMH conversion have been observed pointing to the importance of secondary processes for OH radical generation. Generally, the detected OH radical yields were definitely smaller than thought so far. The results of this study do not support the mechanism of OH radical formation from the reaction of MMH with ozone as proposed in the literature.     

A study of the self reaction of CH2ClO2 and CHCl2O2 radicals at 298 K

A low‐pressure discharge‐flow system equipped with laser‐induced fluorescence (LIF) detection of NO₂ and resonance‐fluorescence detection of OH has been employed to study the self reactions CH₂ClO₂ + CH₂ClO₂ → products (1) and CHCl₂O₂ + CHCl₂O₂ → products (2), at T = 298 K and P = 1–3 Torr. Possible secondary reactions involving alkoxy radicals are identified. We report the phenomenological rate constants (k_obs) k_1obs = (4.1 ± 0.2) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ k_2obs = (8.6 ± 0.2) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ and the rate constants derived from modelling the decay profiles for both peroxy radical systems, which takes into account the proposed secondary chemistry involving alkoxy radicals k₁ = (3.3 ± 0.7) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ k₂ = (7.0 ± 1.8) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ A possible mechanism for these self reactions is proposed and QRRK calculations are performed for reactions (1), (2) and the self‐reaction of CH₃O₂, CH₃O₂ + CH₃O₂ → products (3). These calculations, although only semiquantitative, go some way to explaining why both k₁ and k₂ are a factor of ten larger than k₃ and why, as suggested by the products of reaction (1) and (2), it seems that the favored reaction pathway is different from that followed by reaction (3). The atmospheric fate of the chlorinated peroxy species, and hence the impact of their precursors (CH₃Cl and CH₂Cl₂), in the troposphere are briefly discussed. HC(O)Cl is identified as a potentially important reservoir species produced from the photooxidation of these precursors. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 433–444, 1999     

Oxidation of dimethyl ether: Absolute rate constants for the self reaction of CH3OCH2 radicals,the reaction of CH3OCH2 radicals with O2, and the thermal decomposition of CH3OCH2 radicals

The rate constant for the reaction of CH₃OCH₂ radicals with O₂ (reaction (1)) and the self reaction of CH₃OCH₂ radicals (reaction (5)) were measured using pulse radiolysis coupled with time resolved UV absorption spectroscopy. k₁ was studied at 296K over the pressure range 0.025–1 bar and in the temperature range 296–473K at 18 bar total pressure. Reaction (1) is known to proceed through the following mechanism: CH₃OCH₂ + O₂ ↔ CH₃OCH₂O₂^# → CH₂OCH₂O₂H^# → 2HCHO + OH (k_prod) CH₃OCH₂ + O₂ ↔ CH₃OCH₂O₂^# + M → CH₃OCH₂O₂ + M (k_RO2) k = k_RO2 + k_prod, where k_RO2 is the rate constant for peroxy radical production and k_prod is the rate constant for formaldehyde production. The k₁ values obtained at 296K together with the available literature values for k₁ determined at low pressures were fitted using a modified Lindemann mechanism and the following parameters were obtained: k_RO2,0 = (9.4 ± 4.2) × 10⁻³⁰ cm⁶ molecule⁻² s⁻¹, k_RO2,∞ = (1.14 ± 0.04) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹, and k_prod,0 = (6.0 ± 0.5) × 10⁻¹² cm³ molecule⁻¹ s⁻¹, where k_RO2,0 and k_RO2,∞ are the overall termolecular and bimolecular rate constants for formation of CH₃OCH₂O₂ radicals and k_prod,0 represents the bimolecular rate constant for the reaction of CH₃OCH₂ radicals with O₂ to yield formaldehyde in the limit of low pressure. k_RO2,∞ = (1.07 ± 0.08) × 10⁻¹¹ exp(−(46 ± 27)/T) cm³ molecule⁻¹ s⁻¹ was determined at 18 bar total pressure over the temperature range 296–473K. At 1 bar total pressure and 296K, k₅ = (4.1 ± 0.5) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ and at 18 bar total pressure over the temperature range 296–523K, k₅ = (4.7 ± 0.6) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. As a part of this study the decay rate of CH₃OCH₂ radicals was used to study the thermal decomposition of CH₃OCH₂ radicals in the temperature range 573–666K at 18 bar total pressure. The observed decay rates of CH₃OCH₂ radicals were consistent with the literature value of k₂ = 1.6 × 10¹³exp(−12800/T)s⁻¹. The results are discussed in the context of dimethyl ether as an alternative diesel fuel. © 1997 John Wiley & Sons, Inc.     

Rate coefficients for the reactions of OH with n‐propanol and iso‐propanol between 237 and 376 K

The rate coefficients for the reaction OH + CH₃CH₂CH₂OH → products (k₁) and OH + CH₃CH(OH)CH₃ → products (k₂) were measured by the pulsed‐laser photolysis–laser‐induced fluorescence technique between 237 and 376 K. Arrhenius expressions for k₁ and k₂ are as follows: k₁ = (6.2 ± 0.8) × 10^?12 exp[?(10 ± 30)/T] cm³ molecule^?1 s^?1, with k₁(298 K) = (5.90 ± 0.56) × 10^?12 cm³ molecule^?1 s^?1, and k₂ = (3.2 ± 0.3) × 10^?12 exp[(150 ± 20)/T] cm³ molecule^?1 s^?1, with k₂(298) = (5.22 ± 0.46) × 10^?12 cm³ molecule^?1 s^?1. The quoted uncertainties are at the 95% confidence level and include estimated systematic errors. The results are compared with those from previous measurements and rate coefficient expressions for atmospheric modeling are recommended. The absorption cross sections for n‐propanol and iso‐propanol at 184.9 nm were measured to be (8.89 ± 0.44) × 10^?19 and (1.90 ± 0.10) × 10^?18 cm² molecule^?1, respectively. The atmospheric implications of the degradation of n‐propanol and iso‐propanol are discussed. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 42: 10–24, 2010     

Kinetic study of the reaction of chlorine atoms with CF3I and the reactions of CF3 radicals with O2, Cl2 and NO at 296 K

The kinetics of the gas-phase reaction of Cl atoms with CF₃I have been studied relative to the reaction of Cl atoms with CH₄ over the temperature range 271–363 K. Using k(Cl + CH₄) = 9.6 × 10^?12 exp(?2680/RT) cm³ molecule^?1 s^?1, we derive k(Cl + CF₃I) = 6.25 × 10^?11 exp(?2970/RT) in which E_a has units of cal mol^?1. CF₃ radicals are produced from the reaction of Cl with CF₃I in a yield which was indistinguishable from 100%. Other relative rate constant ratios measured at 296 K during these experiments were k(Cl + C₂F₅I)/k(Cl + CF₃I) = 11.0 ± 0.6 and k(Cl + C₂F₅I)/k(Cl + C₂H₅Cl) = 0.49 ± 0.02. The reaction of CF₃ radicals with Cl₂ was studied relative to that with O₂ at pressures from 4 to 700 torr of N₂ diluent. By using the published absolute rate constants for k(CF₃ + O₂) at 1–10 torr to calibrate the pressure dependence of these relative rate constants, values of the low- and high-pressure limiting rate constants have been determined at 296 K using a Troe expression: k₀(CF₃ + O₂) = (4.8 ± 1.2) × 10^?29 cm⁶ molecule^?2 s^?1; k_∞(CF₃ + O₂) = (3.95 ± 0.25) × 10^?12 cm³ molecule^?1 s^?1; F_c = 0.46. The value of the rate constant k(CF₃ + Cl₂) was determined to be (3.5 ± 0.4) × 10^?14 cm³ molecule^?1 s^?1 at 296 K. The reaction of Cl atoms with CF₃I is a convenient way to prepare CF₃ radicals for laboratory study. © 1995 John Wiley & Sons, Inc.     

Kinetic study of the reactions of Br2 with OH and OD

The kinetics of the reactions OH + Br₂ → HOBr + Br (1) and OD + Br₂ → DOBr + Br (3) have been studied in the temperature range 230–360 K and at total pressure of 1 Torr of helium using the discharge‐flow mass spectrometric method. The following Arrhenius expressions were obtained either from the kinetics of product formation (HOBr, DOBr) in excess of Br₂ over OH and OD or from the kinetics of Br₂ consumption in excess of OH and OD: k₁ = (1.8 ± 0.3) × 10⁻¹¹ exp [(235 ± 50)/T] and k₃ = (1.9 ± 0.2) × 10⁻¹¹ exp [(220 ± 25)/T] cm³ molecule⁻¹ s⁻¹. For the reaction channels of the title reactions: OH + Br₂ → BrO + HBr and OD + Br₂ → BrO + DBr, the upper limits of the branching ratios were found to be 0.03 and 0.02 at T = 320 K, respectively. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 698–704, 1999     

Kinetics and mechanism of the reaction of Cl atoms with HO2 radicals

The kinetic and mechanism of the reaction Cl + HO₂ → products (1) have been studied in the temperature range 230–360 K and at total pressure of 1 Torr of helium using the discharge‐flow mass spectrometric method. The following Arrhenius expression for the total rate constant was obtained either from the kinetics of HO₂ consumption in excess of Cl atoms or from the kinetics of Cl in excess of HO₂: k₁ = (3.8 ± 1.2) × 10^?11 exp[(40 ± 90)/T] cm³ molecule^?1 s^?1, where uncertainties are 95% confidence limits. The temperature‐independent value of k₁ = (4.4 ± 0.6) × 10^?11 cm³ molecule^?1 s^?1 at T = 230–360 K, which can be recommended from this study, agrees well with most recent studies and current recommendations. Both OH and ClO were detected as the products of reaction (1) and the rate constant for the channel forming these species, Cl + HO₂ → OH + ClO (1b), has been determined: k_1b = (8.6 ± 3.2) × 10^?11 exp[?(660 ± 100)/T] cm³ molecule^?1 s^?1 (with k_1b = (9.4 ± 1.9) × 10^?12 cm³ molecule^?1 s^?1 at T = 298 K), where uncertainties represent 95% confidence limits. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 317–327, 2001     

FTIR spectroscopic study of the Cl- and Br-atom initiated oxidation of ethene

The reaction mechanism of the halogen (Cl and Br)-atom initiated oxidation of C₂H₄ was studied using the long path FTIR spectroscopic method in 700 torr of air at 296 ± 2 K. Among the major halogen-containing products were X? CH₂CHO, X? CH₂CH₂OH, and X? CH₂CH₂OOH (X = Cl or Br) which were shown to be formed via the self-reaction of the X? CH₂CH₂OO radicals, i.e., 2X? CH₂CH₂OO → 2X? CH₂CH₂O + O₂; (a) 2X? CH₂CH₂OO → X? CH₂CHO + X? CH₂CH₂OH + O₂ and (b) followed by X? CH₂CH₂O + O₂ → X? CH₂CHO + HO₂ and X? CH₂CH₂OO + HO₂ → X? CH₂CH₂OOH + O₂. From the observed yields of X? CH₂CHO and X? CH₂CH₂OH the branching ratios for reactions (a) and (b) were determined to be k_a/k_b = 1.35 ± 0.07(2σ) for both X = Cl and Br. In addition, the O₂-dependence of the rate constant for the Br + C₂H₄ reaction was determined by the relative rate technique as a function of O₂ partial pressure from 140 to 700 torr at 700 torr total pressure of N₂/O₂ diluent. Rate constants for the reactions of Cl-atoms with Cl-CH₂CHO and Br-atoms with Br-CH₂CHO were also determined to be [4.3 ± 0.2(2sigma;)] × 10^?11 and less than or equal to [1.83 ± 0.11(2σ)] × 10^?13 cm³ molecule^?1 s^?1, respectively.     

Kinetic study of the reaction of OH radicals with nitrosyl chloride as a possible source of ClOH

The reaction of OH with NOCl has been studied using the discharge flow reaction-EPR technique. The absolute rate constant is k₁ = (4.3±0.4)× 10^?13 cm³ molecule^?1 s^?1 at 298 K. A mass spectrometric investigation of the products shows that this reaction occurs via two primary steps, OH + NOCl → NO + ClOH(1a) and OH + NOCl → HONO + Cl (1b) with k_1a =k_1b.     

Rate constant for the reaction Br + O3 → BrO + O2 from 248 to 418 K: Kinetics and mechanism

The rate constant for the Br + O₃ → BrO + O₂ reaction was measured by the discharge flow technique, employing resonance fluorescence detection of Br. Over the temperature range 248 to 418 K, in 1 to 3 torr of He, decays of Br in excess O₃ yield the value k₁ = (3.28 ± 0.40) × 10^?11 e^[?944±30]/T cm³ molecule^?1 s^?1. Cited uncertainties are at the 95% confidence level and include an estimate of the systematic errors. The rate constants for the reactions of O₃ with Br, Cl, F, OH, O, and N correlate with the electron affinities of the radicals suggesting that the reactions proceed through early transition states dominated by transfer of electron density from the highest occupied molecular orbital of ozone to the singly occupied radical MO. The implications of this new measurement of k₁ for stratospheric chemistry are discussed.     

Rate coefficients for the reaction of OH with HONO between 298 and 373 K

Rate coefficients, k₁, for the reaction OH + HONO → H₂O + NO₂, have been measured over the temperature range 298 to 373 K. The OH radicals were produced by 266 nm laser photolysis of O₃ in the presence of a large excess of H₂O vapor. The temporal profiles of OH were measured under pseudo-first-order conditions, in an excess of HONO, using time resolved laser induced fluorescence. The measured rate coefficient exhibits a slight negative temperature dependence, with k₁ = (2.8 ± 1.3) × 10^?12 exp((260 ± 140)/T) cm³ molecule^?1 s^?1. The measured values of k₁ are compared with previous determinations and the atmospheric implications of our findings are discussed.     

Study of the kinetics of the reactions of NO3 with HO2 and OH

The Absolute rate constants for the gas-phase reactions of NO₃ with HO₂ and OH have been determined using the discharge flow laser magnetic resonance method (DF-LMR). Since OH was found to be produced in the reaction of HO₂ with NO₃, C₂F₃Cl was used to scavenge it. The overall rate constant, k₁, for the reaction, HO₂ + NO₃ → products, was measured to be k₁=(3.0 ± 0.7)×10^?12 cm³ molecule^?1 s^?1 at (297 ± 2) K and P=(1.4 – 1.9) torr. This result is in reasonable agreement with the previous studies. Direct detection of HO₂ and OH radicals and the use of three sources of NO₃ enabled us to confirm the existence of the channel producing OH:HO₂+NO₃→OH+NO₂+O₂ (1a); the other possible channel is HO₂+NO₃→HNO₃+O₂ (1b). From our measurements and the computer simulations, the branching ratio, k_1a/(k_1a + k_1b), was estimated to be (1.0). The rate coefficient for the reaction of OH with NO₃ was determined to be (2.1 ± 1.0) × 10^?11 cm³ molecule^?1 s^?1. © 1993 John Wiley & Sons, Inc.     

A laser flash photolysis/IR diode laser absorption study of the reaction of chlorine atoms with selected alkanes

A high‐resolution IR diode laser in conjunction with a Herriot multiple reflection flow‐cell has been used to directly determine the rate coefficients for simple alkanes with Cl atoms at room temperature (298 K). The following results were obtained: k(Cl + n‐butane) = (1.91 ± 0.10) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + n‐pentane) = (2.46 ± 0.12) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + iso‐pentane) = (1.94 ± 0.10) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + neopentane) = (1.01 ± 0.05) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + n‐hexane) = (3.44 ± 0.17) × 10^?10 cm³ molecule^?1 s^?1 where the error limits are ±1σ. These values have been used in conjunction with our own previous measurements on Cl + ethane and literature values on Cl + propane and Cl + iso‐butane to generate a structure activity relationship (SAR) for Cl atom abstraction reactions based on direct measurements. The resulting best fit parameters are k_p = (2.61 ± 0.12) × 10^?11 cm³ molecule^?1 s^?1, k_s = (8.40 ± 0.60) × 10^?11 cm³ molecule^?1 s^?1, k_t = (5.90 ± 0.30) × 10^?11 cm³ molecule^?1 s^?1, with f( ? CH₂^? ) = f (? CH₂^? ) = f (?C?) = f = 0.85 ± 0.06. Tests were carried out to investigate the potential interference from production of excited state HCl(v = 1) in the Cl + alkane reactions. There is some evidence for HCl(v = 1) production in the reaction of Cl with shape n‐hexane. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 34: 86–94, 2002