Evaluation of an amide‐based stationary phase for supercritical fluid chromatography

A relatively new stationary phase containing a polar group embedded in a hydrophobic backbone (i.e., ACE ® C18‐amide) was evaluated for use in supercritical fluid chromatography. The amide‐based column was compared with columns packed with bare silica, C₁₈ silica, and a terminal‐amide silica phase. The system was held at supercritical pressure and temperature with a mobile phase composition of CO₂ and methanol as cosolvent. The linear solvation energy relationship model was used to evaluate the behavior of these stationary phases, relating the retention factor of selected probes to specific chromatographic interactions. A five‐component test mixture, consisting of a group of drug‐like molecules was separated isocratically. The results show that the C₁₈‐amide stationary phase provided a combination of interactions contributing to the retention of the probe compounds. The hydrophobic interactions are favorable; however, the electron donating ability of the embedded amide group shows a large positive interaction. Under the chromatographic conditions used, the C₁₈‐amide column was able to provide baseline resolution of all the drug‐like probe compounds in a text mixture, while the other columns tested did not.     

Automated screening of reversed‐phase stationary phases for small‐molecule separations using liquid chromatography with mass spectrometry

There are various reversed‐phase stationary phases that offer significant differences in selectivity and retention. To investigate different reversed‐phase stationary phases (aqueous stable C₁₈, biphenyl, pentafluorophenyl propyl, and polar‐embedded alkyl) in an automated fashion, commercial software and associated hardware for mobile phase and column selection were used in conjunction with liquid chromatography and a triple quadrupole mass spectrometer detector. A model analyte mixture was prepared using a combination of standards from varying classes of analytes (including drugs, drugs of abuse, amino acids, nicotine, and nicotine‐like compounds). Chromatographic results revealed diverse variations in selectivity and peak shape. Differences in the elution order of analytes on the polar‐embedded alkyl phase for several analytes showed distinct selectivity differences compared to the aqueous C₁₈ phase. The electron‐rich pentafluorophenyl propyl phase showed unique selectivity toward protonated amines. The biphenyl phase provided further changes in selectivity relative to C₁₈ with a methanolic phase, but it behaved very similarly to a C₁₈ when an acetonitrile‐based mobile phase was evaluated. This study shows the value of rapid column screening as an alternative to excessive mobile phase variation to obtain suitable chromatographic settings for analyte separation.     

Factors affecting the reversed-phase liquid chromatographic separation of polycyclic aromatic hydrocarbon isomers

Reversed-phase liquid chromatography (LC) on C₁₈ stationary phases provides excellent selectivity for the separation of polycyclic aromatic hydrocarbons (PAH). Recent studies have shown that several factors affect selectivity for the LC separation of PAH including phase type (monomeric or polymeric), pore diameter and surface area of the silica substrate, and surface density of the C₁₈ ligands. In this paper the separation of eleven PAH isomers of molecular weight 278 is used to further illustrate the effect of stationary phase characteristics and shape of the solute (length-to-breadth ratio, L/B) on retention and selectivity. Only polymeric C₁₈ phases with a high C₁₈ surface coverage provided separation of all eleven isomers and the elution order of these isomers generally followed increasing L/B values. The effect of solute nonplanarity on reversed-phase LC retention was investigated on both monomeric and polymeric phases using a series of planar and nonplanar PAH pairs. For each solute pair, the nonplanar solute eluted earlier than the planar solute, the largest selectivity factors being observed on the C₁₈ phase with the highest percent carbon load. Based on these studies, a model is proposed to describe the retention of PAH on polymeric C₁₈ phases.     

Modification of Selectivity in Reversed-Phase Liquid Chromatography of Polycyclic Aromatic Hydrocarbons Using Mixed Stationary Phases

Abstract

Monomeric and polymeric C₁₈ materials provide significantly different selectivities for polycyclic aromatic hydrocarbons (PAH) in reversed-phase liquid chromatography. Selectivity factors vary in a regular manner with respect to surface concentration of C₁₈ groups on different C₁₈ columns. In this study, we investigated the feasibility of “customizing” a C₁₈ column to provide an intermediate selectivity by mixing 5-μm polymeric C₁₈ material from two different lots with high and low C₁₈ surface concentrations. Polymeric C₁₈ materials from different production lots were mixed in ratios of 30/70, 50/50, and 70/30 (w/w). Selectivity factors for these columns were found to be similar to those predicted by the linear addition of the selectivities of the two individual phases. The PAH selectivities on these mixed columns were also found to be comparable to data obtained from coupled short columns of appropriate lengths each containing one of these different C₁₈ materials. These studies indicate that columns of specific selectivity can be prepared by either mixing two different C₁₈ materials or by coupling columns containing each of these different phases. The use of mixed phase columns is illustrated for the analysis of a fraction containing five condensed ring PAH isomers (molecular weight 278) isolated from an air particulate sample.     

Selectivity trends in packed column supercritical fluid chromatography with C18 stationary phases

The retention behavior of polycyclic aromatic hydrocarbons (PAHs) in packed-column supercritical fluid chromatography (SFC) is studied for monomeric and polymeric C₁₈ columns. Molecular shape discrimination (shape selectivity) is assessed through the use of Standard Reference Materials (SRMs), adn changes in selectivity are studied as a function of temperature, pressure, and mobile phase composition. Examples of separations of complex PAH isomer mixtures are presented, and guidelines are provided for modification and optimization of shape selectivity in SFC.     

Chromatographic Properties of Monolithic Silica Capillary Columns for Polar and Nonpolar Compounds in Reversed-Phase HPLC

Retention properties of monolithic silica C₁₈ columns were examined for polar and nonpolar compounds. Monolithic silica columns were prepared from two kinds of starting materials, tetramethoxysilane (abbreviated as TMOS) or a mixture of TMOS and methyltrimethoxysilane (abbreviated as Hybrid), and modified with dimethyloctadecylchlorosilane (C₁₈). Retention factors of various compounds on Hybrid-C₁₈ are about twice as much as that on TMOS-C₁₈. The two types of columns showed very similar retention selectivity with few exceptions. TMOS-C₁₈ showed slight preference toward planar polynuclear aromatic hydrocarbons (PAHs) compared to bulky aromatic hydrocarbons, while Hybrid-C₁₈ showed opposite tendency. Some TMOS-C₁₈ columns showed peak tailing for PAHs, and also for basic compounds in an acidic mobile phase, while Hybrid-C₁₈ and majority of TMOS-C₁₈ columns resulted in good peak shape for these compounds.     

Separation of polycyclic aromatic hydrocarbons with a C60 bonded silica phase in microcolumn liquid chromatography

A chemically bonded C₆₀ silica phase was synthesized as a stationary phase for liquid chromatography (LC) and its retention behavior evaluated for various polycyclic aromatic hydrocarbons (PAHs) using microcolumn LC. The results indicate that the C₆₀ bonded phase offers selectivity different from that of octadecylsilica (ODS) bonded phases in the separation of isomeric PAHs. With the C₆₀ phase, PAH molecules having a partial structure similar to that of the C₆₀ molecule, e.g. triphenylene and perylene, were retained longer than with ordinary ODS stationary phases. The results also show that good correlation exists between the retention data with this C₆₀ bonded phase and with C₆₀ itself as the stationary phase.     

A new look at light hydrocarbon separations on commercial alumina PLOT columns: Column selectivity and separation

Alumina-coated porous layer open tubular (PLOT) columns are widely used for analyses of light hydrocarbons (C₁ to C₆). There is, however, a need for improved selectivity for complex analyses such as the determination of impurities in high purity petrochemical products. Some commercial alumina PLOT columns do not have sufficient selectivity for such analyses. The selectivity of four commercial alumina PLOT columns is evaluated for analyses of propylene and ethylene, and differences in column selectivity discussed. Requirements of column selectivity and retention are presented for several applications including the analysis of refinery gas, transformer oil gas, and fuel gas.     

Evaluation and comparison of n‐alkyl chain and polar ligand bonded stationary phases for protein separation in reversed‐phase liquid chromatography

Protein retention is very sensitive to the change of solvent composition in reversed‐phase liquid chromatography for so called “on–off” mechanism, leading to difficulty in mobile phase optimization. In this study, a novel 3‐chloropropyl trichlorosilane ligand bonded column was prepared for protein separation. The differences in retention characteristics between the 3‐chloropropyl trichlorosilane ligand bonded column and n‐alkyl chain modified (C₂, C₄, C₈) stationary phases were elucidated by the retention equation . Retention parameters (a and c) of nine standard proteins with different molecular weights were calculated by using homemade software. Results showed that retention times of nine proteins were similar on four columns, but the 3‐chloropropyl trichlorosilane ligand bonded column obtained the lowest retention parameter values of larger proteins. It meant that their retention behavior affected by acetonitrile concentration would be different due to lower |c| values. More specifically, protein elution windows were broader, and retentions were less sensitive to the change of acetonitrile concentration on the 3‐chloropropyl trichlorosilane ligand bonded column than that on other columns. Meanwhile, the 3‐chloropropyl trichlorosilane ligand bonded column displayed distinctive selectivity for some proteins. Our results indicated that stationary phase with polar ligand provided potential solutions to the “on–off” problem and optimization in protein separation.     

Selectivity Factors for Several Pah Pairs on C18 Bonded Phase Columns

Abstract

The selectivity factors for four pairs of polycyclic aromatic hydrocarbons (PAHs) have been found to be very different on the HC-ODS column in comparison to most other C₁₈ bonded-phase columns. The selectivity factors for these PAH pairs varied slightly with different manufacturing lots of the HC-ODS material, the selectivity variations for each PAH pair being linearly correlated with those for the other pairs.     

Evaluation of the Chromatographic Performance of Conventional, Polar-Endcapped and Calixarene-Bonded Stationary Phases for the Separation of Water-Soluble Vitamins

The performance of four different reversed-phase columns which included a conventional C₁₈ phase, a C₁₈ polar-endcapped phase, an ether-linked phenyl polar-endcapped phase and a calixarene-bonded phase has been systematically compared for the separation of mixture of some water-soluble vitamins containing basic, neutral and acidic compounds of different polarities, as well as different functional groups at three pH levels and different proportions of buffer/methanol. The characteristics of water-soluble vitamins make this combination of compounds very useful as a test mixture to check column performance with real samples. Due to the physical and chemical differences between these compounds, the type of chosen column has a significant influence on the chromatographic behavior. Results of this comparison show that the C₁₈ polar-endcapped phase was the most suitable for the separation of this group of vitamins. The presence of a polar group as an endcapping agent does not seem to influence the overall hydrophobic nature of the polar-endcapped stationary phases. At the same time, these phases displayed enhanced hydrogen bonding and silanol activity.     

Chiral ligand-exchange chromatography on an RP HPLC column coated with a new chiral selector derived froml-spinacine

Summary A commercial reversed-phase (RP) C₁₈ HPLC column has been dynamically coated with the chiral selectorN ^τ-n-decyl-l-spinacine and then loaded with copper(II) ions. Several racemic mixtures of underivatized amino acids and oligopeptides were resolved on the column by chiral ligand-exchange chromatography. The most important experimental conditions affecting column efficiency, retention, and selectivity (temperature and mobile phase flow rate and composition) were extensively investigated.     

Laterally attached liquid-crystalline polymers as stationary phases. Effect of temperature in RP HPLC and comparison with a commercial C18 stationary phase

Summary Specific side-on-fixed liquid-crystalline polymers (SOLCP) have been synthesized for use in silica-modified stationary phases in high-performance liquid chromatography (HPLC). The mesogenic side group of the SOLCP is composed of three benzoate-type phenyl rings with terminal alkoxy chains and is laterally linked to a polysiloxane backbone via an alkyl ester spacer arm. The dependence of the logarithm of the retention factor on the reciprocal temperature showed that the liquid-crystalline anisotropic order was conserved in the small pores (200 ? diameter) of the silica gel. The first-order nematic-isotropic transition is lost and probably becomes second-order. Adsorption enthalpies for the liquid-crystalline stationary phases have been measurement for three polycyclic aromatic hydrocarbon isomers (ortho-terphenyl, triphenylene, and chrysene) and compared with those for a commercial C₁₈ phase. The adsorption enthalpies never exceeded 30 kJ mol⁻¹, i.e. ten times the thermal agitation energy,RT. They were always less on the SOLCP stationary phase than on the C₁₈ column, emphasizing the more rigid structure of the liquid crystalline phase and its mechanism based upon adsorption. Better separation of steroids, pesticides and amino acids were obtained with the LCP-coated silica than the commercial bonded C₁₈ column. Four small peptides were successfully separated by using pure water as mobile phase.     

A new imidazolium-embedded C18 stationary phase with enhanced performance in reversed-phase liquid chromatography

In this paper, a new imidazolium-embedded C₁₈ stationary phase (SiImC₁₈) for reversed-phase high-performance liquid chromatography is described. 1-Allyl-3-octadecylimidazolium bromide ionic liquid compound having a long alkyl chain and reactive groups was newly prepared and grafted onto 3-mercaptopropyltrimethoxysilane-modified silica via a surface-initiated radical-chain transfer addition reaction. The SiImC₁₈ obtained was characterized by elemental analysis, infrared spectroscopy, thermogravimetric analysis, diffuse reflectance infrared Fourier transform, and solid-state ¹³C and ²⁹Si cross-polarization/magic angle spinning nuclear magnetic resonance spectroscopy. The selectivity toward polycyclic aromatic hydrocarbons relative to that toward alkylbenzenes exhibited by SiImC₁₈ was higher than the corresponding selectivity exhibited by a conventional octadecyl silica (ODS) column, which could be explained by electrostatic π–π interaction cationic imidazolium and electron-rich aromatic rings. On the other hand, SiImC₁₈ also showed high selectivity for polar compounds, which was based on the multiple interaction and retention mechanisms of this phase with different analytes. 1,6-Dinitropyrene and 1,8-dinitropyrene, which form a positional isomer pair of dipolar compounds, were separated successfully with the SiImC₁₈ phase. Seven nucleosides and bases (i.e. cytidine, uracil, uridine, thymine, guanosine, xanthosine, and adenosine) were separated using only water as the mobile phase within 8 min, which is difficult to achieve when using conventional hydrophobic columns such as ODS. The combination of electrostatic and hydrophobic interactions is important for the effective separation of such basic compounds without the use of any organic additive as the eluent in the octadecylimidazolium column.     

Preparation and evaluation of n-octadecylphosphonic acid-modified magnesia-zirconia stationary phases for reversed-phase liquid chromatography

Three n-octadecylphosphonic acid-modified magnesia-zirconia reversed stationary phases (C₁₈PZM) are prepared via the strong Lewis base interactions between organophosphonate and magnesia-zirconia composite. And two of them are end-capped by using trimethylchlorosilane as end-capping agent in different procedures. Stability studies at extreme high pH conditions (pH 9-12) show that both the non-endcapped and endcapped columns are quite stable at pH 12 mobile phase. The reversed-phase liquid chromatographic behavior of three C₁₈PZM stationary phases are comparatively investigated in detail using a variety of basic compounds as probes. The retention of basic compounds on the three phases is studied over a wide range of pHs. And the possible retention mechanisms of basic compounds on the three stationary phases are discussed. The results show that the basic solutes retain by a hydrophobic and cation-exchange interaction mixed mechanism on three stationary phases when they are operated in eluents at pH values near to the pK_a of the Brönsted conjugate acid form of the analyte, suggesting that inherent zirconol groups on ZM are not expected to interact with bases via cation-exchange interaction at lower pH. Nonetheless, the non-endcapped phase differs markedly from the edncapped ones in retention and selectivity of basic solutes using eluents at pH 4.1, implying a complex retention mechanism at this pH. The cation-exchange sites under such conditions are more likely due to the adsorbed Lewis base anionic buffer constituents (acetate) on accessible ZM surface sites than the chemisorbed phosphonate. Although the three phases exhibit very similar chromatographic behavior with eluents at pH 10.1, and show in general satisfactory separation of basic compounds and alkaloids studied, the performance for a specific analyte, however, differs largely from column to column.     

Study of RP HPLC Retention Behaviours in Analysis of Carotenoids

For determination of selected carotenoids, various types of columns for high-performance liquid chromatography (HPLC) with different properties have been used. The characteristics of the laboratory-used packing material containing monomeric alkyl-bonded phases (C₁₈, C₃₀) and phenyl as well as phenyl-hexyl stationary phases were studied. The retention data of the examined compounds were used to determine the hydrophobicity and silanol activity of stationary phases applied in the study. The presence of the polar and carboxyl groups in the structure of the bonded ligand strongly influences the polarity of the stationary phase. Columns were compared according to methylene selectivity using a series of benzene homologues. The measurements were done using a methanol–water mobile phase. Knowledge of the properties of the applied stationary phase provided the possibility to predict the RP HPLC retention behaviours in analysis of carotenoids including lutein, lycopene and β-carotene. The composition of the mobile phase, the addition of triethylamine and the type of stationary phase had been taken into account in designing the method of carotenoid identification. Also a monolithic column characterised by low hydrodynamic resistance, high porosity and high permeability was applied. The presented results show that the coverage density of the bonded ligands on silica gel packings and length of the linkage strongly influence the carotenoid retention behaviours. In our study, the highest retention parameters for lutein, lycopene and β-carotene were observed for C₃₀ and C₁₈ stationary phase. This effect corresponds with pore size of column packing greater than 100 Å and carbon content higher than 11 %.     

The Purification of Xanthene Dyes by Reverse Phase High Performance Liquid Chromatography

Abstract

A reliable method for the separation of fluorescein dyes from their impurities was developed using high performance liquid chromatography and involved a μBondapak C₁₈ reverse phase column and mixtures of methanol and ammonium acetate buffer. This technique was used to verify the purity of commercial products as well as to aid in the development of an empirical theory related to retention of halogenated fluorescein dyes by reverse phase columns.     

Dynamic column-coating procedure for chiral ligand-exchange chromatography

Summary The preparation of HPLC columns for chiral ligand-exchange chromatography by dynamic adsorption of a histidine-based chiral selector (N-n-decyl-L-histidine, LNDH) on commercial reversed-phase, C₁₈ columns was investigated. The most suitable solvent for column preparation was sought through a study of the behaviour of LNDH on the reversed-phase column eluting with different methanol-water ratios at varying pH. It is shown that the use of an aqueous solvent instead of pure methanol is advantageous, despite the decrease in LNDH solubility, and that the solvent pH must be controlled. Open and closed-cycle procedures for flowing the selector solution through the column are compared through a study of chromatographic retention, selectivity and efficiency parameters of selected enantiomers. Even though no significant difference in column loading was found between the two procedures, the open cycle method gave rise to more efficient and selective chiral columns.     

Evaluation of chromatographic columns packed with semi‐ and fully porous particles for benzimidazoles separation

The behavior of 15 benzimidazoles, including their main metabolites, using several C₁₈ columns with standard or narrow‐bore diameters and different particle size and type were evaluated. These commercial columns were selected because their differences could affect separation of benzimidazoles, and so they can be used as alternative columns. A simple screening method for the analysis of benzimidazole residues and their main metabolites was developed. First, the separation of benzimidazoles was optimized using a Kinetex C₁₈ column; later, analytical performances of other columns using the above optimized conditions were compared and then individually re‐optimized. Critical pairs resolution, analysis run time, column type and characteristics, and selectivity were considered for chromatographic columns comparison. Kinetex XB was selected because it provides the shortest analysis time and the best resolution of critical pairs. Using this column, the separation conditions were re‐optimized using a factorial design. Separations obtained with the different columns tested can be applied to the analysis of specific benzimidazoles residues or other applications.