The electrocatalytic reactions of adenine, guanine, H2O, H2O2, N2H4, and l -cysteine catalyzed by poly(Ni(4-TMPyP)) film-modified electrodes

Electrochemical preparation of poly(nickel tetrakis(N-methyl-4-pyridyl)porphyrin) tetratosylate (poly-Ni(4-TMPyP)) produces stable and electrochemically active films in strong and weak basic aqueous solutions. These films were produced on glassy carbon and gold electrodes. The electrochemical quartz crystal microbalance and cyclic voltammetry were used to study the in situ growth of poly(Ni(4-TMPyP)) films. The electrochemical properties of poly(Ni(4-TMPyP)) films indicate that the redox process was confined in to the immobilized film. The electrochemical quartz crystal microbalance results showed an ion exchange reaction for the redox couple. The polymer films showed one new redox couple when transferred to strong and weak basic aqueous solutions and the formal potential was found to be pH dependent. The electrocatalytic oxidation of H₂O by a nickel tetrakis(N-methyl-4-pyridyl)porphyrin film-modified electrode was also performed. The mechanism of oxygen evolution was determined by cyclic voltammetry, chronoamperometry and rotating ring disc electrode methods. The oxygen evolution was determined by a bicatalyst system using hemoglobin, and iron tetrakis (N-methyl-2-pyridyl)porphyrin as catalyst to detect the oxygen by electrocatalytic reduction. The electrocatalytic oxidations of adenine, guanine, H₂O₂, N₂H₄, NH₂OH, and l-cysteine by the film-modified electrode obtained from water-soluble nickel porphyrin were also investigated.     

(Amidomethyl)pyridine zirconium and hafnium complexes: Synthesis and structural characterization

A series of 2-formyl and 2-acetylpyridines was condensed with 2,6-diisopropylaniline to yield the corresponding imines. Their reaction with sodium borohydride gave the respective N-arylaminomethylpyridines. Treatment of the N-arylformimino- or -acetiminopyridines with trimethylaluminum followed by hydrolysis furnished a series of the respective substituted N-arylaminoethylpyridine derivatives. Their reaction with tetrabenzylzirconium or tetrakis(dimethylamido)zirconium or -hafnium gave the corresponding (chelate ligand)MX₃ systems in a variety of cases. Some of these gave very active ethene polymerization catalysts upon activation with methylalumoxane. Six of the neutral aminoalkylpyridines were characterized by X-ray diffraction, as were eight of the zirconium or hafnium complexes and two aluminum chelate complex systems.     

The initiation of the free radical polymerization of vinyl monomers by hexakis(arylisocyano) derivatives of chromium (o)

The present paper describes studies carried out to determine the effect of structure on the free radical polymerization of vinyl monomers initiated by means of the hexakis(arylisocyano) derivatives of chromium (o) in which chlorine, methoxy, and methyl groups have been substituted into different positions of the benzene ring. The kinetics of the initiation reactions resembles that studied in detail for the parent compound hexakis(phenylisocyano) chromium (o). The observed changes in the initial rates of the polymerization of methyl methacrylate at 80°C in the presence of carbon tetrachloride can be accounted for by the electronic effects associated with these substituents. However, when steric overcrowding occurs, the initial rates of polymerization are reduced considerably. The results obtained confirm the mechanism of initiation proposed earlier in which the rate determining step is the S_n² displacement of an arylisocyano ligand by a monomer or reactive solvent molecule. An attempt has been made to explain the increased rate of radical formation observed when chlorine is substituted into the benzene ring.     

Anionic polymerization of methyl methacrylate using tetrakis[tris(dimethylamino)phosphoranylidenamino] phosphonium (P5+) as counterion in tetrahydrofuran

A novel metal‐free initiator, i.e. the salt of the tetrakis[tris(dimethylamino)phosphoranylidenamino]phosphonium (P₅⁺) cation with the 1,1‐diphenylhexyl (DPH^–) anion was prepared by cation metathesis. It initiates a very fast and controlled anionic polymerization of methyl methacrylate in THF. Kinetic investigations between –20 and +20°C using a flow tube reactor provide nearly linear first‐order time‐conversion plots with half‐lives below 0.1 s, a linear dependence of the number‐average degree of polymerization, and rather narrow molecular weight distributions (M_w/M_n ≈ 1.2). ¹³C NMR measurements on a model of the active chain end (the P₅⁺ salt of ethyl isobutyrate) in THF‐d₈ show 15 and 25 ppm upfield shifts of the α‐carbon compared to the dimers and tetramers of the lithium ester enolate, respectively, indicating a non‐aggregated structure and an increased charge density on the α‐carbon.     

Polymerization initiated by an electron donor–acceptor complex. Part IV. Kinetic study of polymerization of methyl methacrylate initiated by the charge-transfer complex consisting of poly-2-vinylpyridine and liquid sulfur dioxide

A kinetic study has been made of the polymerization of methyl methacrylate (MMA) initiated by a charge-transfer complex of poly-2-vinylpyridine (electron donor) and liquid sulfur dioxide (acceptor) in the presence of carbon tetrachloride. It is concluded that the polymerization proceeds through free-radical intermediates, as with the pyridine-liquid sulfur dioxide complex system. The association constants K of acceptor and polymer electron donors which range widely in their molecular weight were determined spectrophotometrically, and it has been found that both K and overall rate of polymerization R_p of MMA decrease with increasing molecular weight of polymer donor; contrary to this, molecular weight of PMMA formed increases with increasing molecular weight of the polymer donor. Other kinetic behaviors was essentially the same as in the pyridine–liquid sulfur dioxide system, i.e., R_p is proportional to the square root of the concentration of the complex and to the 3/2-order of the monomer concentration; R_p is clearly sensitive to the carbon tetrachloride concentration at low concentration of carbon tetrachloride, but for a higher concentration it is practically independent of the carbon tetrachloride concentration. It has been deduced from a kinetic mechanism for the initiation that a primary radical may be produced from the reduction of carbon tetrachloride by an associated complex consisting of liquid sulfur dioxide–polymer donor and the monomer.     

Efficient Synthesis of Polycyclic γ-Lactams by Catalytic Carbonylation of Ene-Imines via Nickelacycle Intermediates

The nickel(0)-catalyzed carbonylative cycloaddition of 1,5- and 1,6-ene-imines with carbon monoxide (CO) is reported. Key to this reaction is the efficient regeneration of the catalytically active nickel(0) species from nickel carbonyl complexes such as [Ni(CO)₃L]. A variety of tri- and tetracyclic γ-lactams were thus prepared in excellent yields with 100 % atom efficiency. Preliminary results on asymmetric derivatives promise potential in the synthesis of enantioenriched polycyclic γ-lactams.     

Ruthenium(II) carbonyl complexes with N-[di(alkyl/aryl)carbamothioyl]benzamide derivatives and triphenylphosphine as effective catalysts for oxidation of alcohols

Ruthenium(II) complexes, [RuCl(L)(CO)(PPh₃)₂] {where L?=?N-[di(alkyl/aryl)carbamothioyl]benzamide derivatives}, are prepared from reaction between [RuHCl(CO)(PPh₃)₃] and N-[di(alkyl/aryl)carbamothioyl]benzamide derivatives in toluene and characterized by elemental analysis and spectral data (electronic, infrared, ¹H NMR, and ³¹P NMR). The combination of [RuCl(L)(CO)(PPh₃)₂] (0.01?mmol) and N-methylmorpholine-N-oxide (NMO) (3?mmol) is an active catalyst for the oxidation of primary, secondary, cyclic, allylic, aliphatic, and benzylic alcohols to their corresponding aldehydes and ketones at room temperature. The oxidation protocol is simple to operate and gives the corresponding carbonyl compounds good to excellent yields.     

Effect of Rh(III) and Ru(II) complexes in the polymerization of vinyl monomers initiated by charge transfer mechanism

The initiation of polymerization of vinyl monomers such as methyl methacrylate (MMA) and methyl acrylate (MA) by a charge transfer complex formed between n-butylamine(nBA) and carbon tetrachloride (CCl₄) in dimethylsulfoxide (DMSO) at 30°C is slow. The effect of the dimethylsulfoxide complexes of Rh(III) and Ru(II) on the polymerization of MMA and MA in the presence of nBA, and CCl₄ in DMSO has been studied. The rate of polymerization and percent conversion of the MMA and MA at 30°C are evaluated at the critical concentration of the metal complexes. At the critical range of the metal complex concentrations, both R_p, and percent conversion of MMA and MA were found to be highest. However, above and below the critical concentrations, R_p and percent conversion of the monomers were found to decrease. A suitable mechanism for the polymerization has been proposed.     

Efficient Synthesis of Polycyclic γ‐Lactams by Catalytic Carbonylation of Ene‐Imines via Nickelacycle Intermediates

The nickel(0)‐catalyzed carbonylative cycloaddition of 1,5‐ and 1,6‐ene‐imines with carbon monoxide (CO) is reported. Key to this reaction is the efficient regeneration of the catalytically active nickel(0) species from nickel carbonyl complexes such as [Ni(CO)₃L]. A variety of tri‐ and tetracyclic γ‐lactams were thus prepared in excellent yields with 100 % atom efficiency. Preliminary results on asymmetric derivatives promise potential in the synthesis of enantioenriched polycyclic γ‐lactams.     

Synthesis,characterization and catalytic evaluation of ZrCl4:Mg(ClO4)2 for the synthesis of 1,3-diaryl-3-(phenylthio)propan-1-one

Herein we demonstrate a novel tandem aldol condensation-thia-Michael addition process using a bimetallic catalyst (ZrCl₄:Mg(ClO₄)₂). The novel bimetallic catalyst performs under very mild conditions. The catalyst helps in the efficient synthesis of β-mercapto carbonyl derivatives from chalcones and thiols in one-pot method. We successfully used the zirconium tetrachloride in combination with magnesium perchlorate in a specific ratio which is considered as green catalyst and efficiently worked for the synthesis of β-mercapto carbonyl derivatives at room temperature. This is the first report which presents the use of ZrCl₄:Mg(ClO₄)₂ without calcination. Significant advantages of this method are that the reaction is performed under mild conditions, shows good selectivity and high yield, within short reaction times and easy workup. This method minimizes waste disposal problems as well, which makes present method highly efficient and convenient. The synthesized bimetallic catalyst was characterized by different analytical techniques such as XRD and SEM. Subsequently, the synthesized β-mercapto carbonyl products were identified by using FTIR, NMR, GC–MS and CHN elemental analyzer.     

Living radical polymerization of acrylonitrile catalyzed by copper with a high concentration of radical initiator and its application in removal of Ag(I) after modification

In this study, we reported the synthesis of polyacrylonitrile (PAN) via living radical polymerization in N, N‐dimethylformamide using carbon tetrachloride as initiator, copper(II) chloride (CuCl₂)/hexamethylenetetramine as catalyst system, and 2,2‐azobisisobutyronitrile as a high concentration of thermal radical initiator. The polymerization proceeded in controlled/living manner as indicated by first‐order kinetics of the polymerization with respect to the monomer concentration, linear increase of the molecular weight with monomer conversion and narrow polydispersity. Higher polymerization rate and narrower molecular weight distributions were observed with CuCl₂ less than 50 ppm. The rate of polymerization showed a trend of increase along with temperature. The modified PAN containing amidoxime group was used for extraction of Ag(I) ions from aqueous solutions. The adsorption kinetics data indicated that the adsorption process followed pseudo‐second‐order rate model. The isotherm adsorption process could be described by the Freundlich isotherm model. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Metal chelates in vinyl polymerization: Kinetics and mechanism of acrylonitrile polymerization initiated by Cu(II) imine complexes

The free radical polymerization of acrylonitrile (AN) initiated by Cu(II) 4-anilino 2-one [Cu(II) ANIPO] Cu(II), 4-p-toluedeno 3-pentene 2-one [Cu(II) TPO], and Cu(II) 4-p-nitroanilino 3-pentene 2-one [Cu(II) NAPO] was studied in benzene at 50 and 60°C and in carbon tetrachloride (CCl₄), dimethyl sulfoxide (DMSO), and methanol (MeOH) at 60°C. Although the polymerization proceeded in a heterogeneous phase, it followed the kinetics of a homogeneous process. The monomer exponents were ≥2 at two different temperatures and in different solvents. The square-root dependence of R_p on initiator concentration and higher monomer exponents accounted for a 1:2 complex formation between the chelate and monomer. The complex formation was shown by ultraviolet (UV) study. The activation energies, kinetics, and chain transfer constants were also evaluated.     

Dichloromethylenation of substituted 1H-isoindole-1,3-(2H)-diones (phthalimides)

A number of substituted 1H-isoindole-1,3-(2H)-dione derivatives (phthalimides) underwent dichloro-methylenation when reacted with a mixture of triphenylphosphine and carbon tetrachloride.     

SpinPhox/Iridium(I)‐Catalyzed Asymmetric Hydrogenation of Cyclic α‐Alkylidene Carbonyl Compounds

Optically active medium‐sized cyclic carbonyl compounds bearing an α‐chiral carbon center are of interest in pharmaceutical sciences and asymmetric synthesis. Herein, SpinPhox/Ir^I catalysts have been demonstrated to be highly enantioselective in the asymmetric hydrogenation of the CC bonds in the exocyclic α,β‐unsaturated cyclic carbonyls, including a broad range of α‐alkylidene lactams, unsaturated cyclic ketones, and lactones. It is noteworthy that the procedure can be successfully used in the asymmetric hydrogenation of the challenging α‐alkylidenelactam substrates with six‐ or seven‐membered rings, thus affording the corresponding optically active carbonyl compounds with an α‐chiral carbon center in generally excellent enantiomeric excesses (up to 98 % ee). Synthetic utility of the protocol has also been demonstrated in the asymmetric synthesis of the anti‐inflammatory drug loxoprofen and its analogue, as well as biologically important ε‐aminocaproic acid derivatives.     

Polymerization of isoprene initiated by the reaction products of η3-allyl complexes of transition metals and titanium chlorides

The main path of the interaction of chromium and nickel η³-allyl complexes and titanium tetrachloride is the transfer of allyl ligands to titanium with the concomitant reduction of TiCl₄ to η-TiCl₃ and the formation of the products initiating isoprene polymerization. The stereospecific effect of the system is because of the formation of bimetallic complexes with bridged metal—carbon bonds which are the most probable centers of stereospecific cis-1,4-polyisoprene chain propagation.     

Metallacyclic mechanism of the addition polymerization of norbornene involving Ni(I) and Ni(III) complexes

The catalytic system Ni(COD)₂/BF₃·OEt₂ is highly active in the addition polymerization of nor-bornene (NB). Its activity, which is up to 1930 (kg NB) (mol Ni)⁻¹ h⁻¹, is higher than the activity of the other known nickel complex catalysts. Another advantage of this system over the latter is that it contains a smaller proportion of a Lewis acid (5 molar parts or below) and no conventional stabilizing organoelement ligands. The activity of this system in NB polymerization has been investigated by Fourier-transform IR spectroscopy. According to EPR data, NB polymerization is accompanied by the formation of low-spin complexes of trivalent nickel, which result from the oxidative addition of the monomer to univalent nickel complexes. A metallacyclic mechanism involving Ni(I) and Ni(III) complexes is suggested for NB polymerization.     

Vicinal Dibromo and Hydroxy(methoxy) Bromo Derivatives of (1R,4R)-7,7-Dimethyl-1-vinylnorbornan-2-one. Regio- and Stereoselectivity Aspects

Reactions of (1R,4R)-7,7-dimethyl-1-vinylnorbornan-2-one with bromine in carbon tetrachloride and with N-bromosuccinimide in methanol gave the corresponding C^{1 '}-epimeric dibromo and methoxy bromo derivatives. Their structure was determined on the basis of spectral data.     

The nature of active sites in butadiene polymerization catalyzed by organotitanium(III) derivatives

The stereospecificity of benzyl derivatives of trivalent titanium (R_n TiX_3–n, where X = Cl, I, n = 1–3) in butadiene polymerization was studied. It was found that dibenzyltitaniumiodide is an efficient catalyst of the 1,4-cis-polymerization of butadiene and that tribenzyltitanium forms 1,2-units. In both cases all the titanium-benzyl bonds participated in the initiation reaction and the active sites were polymeric analogues of crotyl derivatives of Ti(III); namely, bis-π-oligobutadienyltitaniumiodide and tris-π-oligobutadienyltitanium. These sites are stable at room temperature. The nature of the active sites in the polymerization of butadiene with Ziegler's 1,4-stereo-specific systems Til₄ (or Til₂Cl₂) + AIR₃ are described.     

Chiral arylnickel complexes as highly active initiators for screw‐sense selective living polymerization of 1,2‐diisocyanobenzenes

Optically active chiral organonickel complexes served as efficient chiral initiators for living aromatizing polymerization of 1,2‐diisocyanobenzene derivatives, which afford optically active helical poly(quinoxaline‐2,3‐diyl)s up to 84% s.e. (screw‐sense excess). In comparison with asymmetric polymerization with the corresponding organopalladium initiators, the nickel initiators show a much greater polymerization rate, while the selectivity remains high. The organonickel initiators can be generated in situ from nickel(0) precursors with the corresponding enantiopure (S,S)‐2‐(4,5‐diphenylimidazolin‐2‐yl)phenyl chloride, leading to the convenient synthesis of highly stereo‐controlled poly(quinoxaline‐2,3‐diyl)s. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 898–904, 2010     

Nickel(II)-catalyzed asymmetric alkylation of acyclic oxocarbenium ions with carboxylic acid derivatives

A nickel(II)-catalyzed asymmetric alkylation of acyclic oxocarbenium ions generated in situ from corresponding acetals with carboxylic acid derivatives to prepare β-alkoxyl carbonyl moieties with diverse α-substituents has been disclosed. The method exhibited broad scope of acetals and carboxylic acid derivatives with excellent enantioselectivity and good functional group compatibility, and can be conducted in a gram-scale without obvious loss of efficiency.