Metal Complexes with Macrocyclic Ligands Part XXX. Synthesis and structure of halocuprates of tetraprotonated 1,4,8,11-tetraazacyclotetradecane and its Cu2+ complex

By mixing acidic solutions of 1,4,8,11-tetraazacyclotetradecane (Cy) with CuX₂ (X = Cl^?, Br^?), either the hexahalocuprates of the tetraprotonated form of the macrocycle ([CyH₄] [CuX₆]) or the tetrahalocuprates of its Cu²⁺ complex ([CuCy] [CuX₄]) are obtained. The structures of the chloro derivatives are established by X-ray diffraction analysis. In [CyH₄] [CuCl₆], the Cu²⁺ is in a tetragonally distorted octahedral geometry with four short and two long Cu? Cl bonds. The tetraprotonated macrocycle is centrosymmetric, and its conformation is exodentate, so that the four ammonium groups are as far as possible from each other to minimize the electrostatic repulsion. In [CuCy] [CuCl₄], the Cu²⁺ ion complexed by the macrocycle is surrounded by four N-atoms in a square-planar arrangement. In addition, the axial positions are occupied by two Cl^? ions of two CuCl units, which act as bridges. The macrocycle is in the trans-III-configuration. The other Cu²⁺ ion is coordinated by four Cl^? ions in a distorted tetrahedral geometry. IR and VIS spectra of the chloro and bromo derivatives are used to discuss the structure of the bromo species.     

Metal Complexes with Macrocyclic Ligands,IV. Synthesis,Properties and Kinetics of Complexation with Three N-methyl Substituted 1,4,8,11-tetraazacyclotetradecanes

The synthesis, properties and complexation of 1-methyl-1,4,8,11-tetraazacyclotetradecane (1-MeCyclam-14), 1,5-dimethyl-1,5,8,12-tetraazacyclotetradecane (2-MeCyclam-14) and 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane (4-MeCyclam-14) are described. While the Ni²⁺ and Cu²⁺ complexes of 1-MeCyclam-14 and 2-MeCyclam-14 exhibit square planar geometries, 4-MeCyclam-14 forms Ni²⁺ and Cu²⁺ complexes, whose absorption spectra are best explained by assuming pentaco-ordination of the metal ions. The complexation rate of the three N-methyl substituted macrocycles with Cu²⁺ and Ni²⁺ is slower than can be accounted for by water exchange and little affected by introducing methyl groups at the nitrogens. Both results are in contrast to what is known for open chain amine ligands. A mechanism for the complexation is proposed, which also explains why the products of the reaction of 4-MeCyclam-14 with Cu²⁺ and Ni²⁺ are pentaco-ordinated.     

Metal Complexes with Macrocyclic Ligands. Part XXI. A nonlinear relationship between the stability of Cu2+ complexes and their complexation rate with 1,4,8,11-tetraazacyclotetradecane

The kinetics of the reaction (1) between 1,4,8,11-tetraazacyclotetradecane (Cy) and a series of Cu(II) complexes CuL (L) = glycolate, malonate, succinate, picolinate, glycinate, iminodiacetate, nitrilotriacetate, N-(2-hydroxyethyl)ethylenediaminetriacetate, ethyienediamine, 1,3-diaminopropane, diethylenetriamine and N,N-bis(3-aminopropylamine) were studied spectrophotometrically at 25° and I = 0.5 (KNO₃). From the analysis of the log k_obs/log [L] profiles obtained at different pH values the resolved bimolecular rate constants k (Table 3) were obtained by a nonlinear curve-fitting procedure. For nearly all systems studied, the rate constant k, describing the reaction between the 1:1 complex CuL and the monoprotonated form of the macrocycle CyH, was obtained. The nonlinear relationship between log k and log K_CuL and its nature is discussed. It is shown that the inverse relationship between reactivity and stability described by others is only a special case of the more general Eqn. 3 described here.     

Metal Complexes with Macrocyclic Ligands. Part XXXVIII. Steric effects in the copper(II) and nickel(II) complexes with tetra-N-alkylated 1,4,8,11-tetraazacyclotetradecanes

A series of tetra-N-alkylated 1,4,8,11-tetraazacyclotetradecanes have been synthesized and their complexation potential towards Ni²⁺ and Cu²⁺ studied. In the case of sterically demanding alkyl substituents, such as i-Pr, PhCH₂, or 2-MeC₆H₄CH₂, no metal complexes are formed, whereas for substituents such as Me, Et, and Pr, the metal ion is incorporated into the macrocycle. The spectroscopic properties of the Ni²⁺ and Cu²⁺ complexes in aqueous solution indicate that, depending on the sterical hindrance of the N-substituents, the complexes are either square planar or pentacoordinated. All these Ni²⁺ and Cu²⁺ complexes react with N to give ternary species, the stability of which have been determined by spectrophotometric titrations. The tendency to bind N decreases with increasing steric hindrance of the alkyl substituents. The X-ray studies of the Ni²⁺ complex with the macrocycle 11 , substituted by two Me and two Pr groups, and that of the Cu²⁺ complex with the tetraethyl derivative 8 show that in the solid state, the metal ions exhibit square planar coordination with a small distortion towards tetrahedral geometry.     

Metal Complexes with Macrocyclic Ligands. Part XLI. Nickel(II) and copper(II) complexes with mono-N-functionalized dithiadiazamacrocycles

Three N₂S₂ macrocycles ( 3, 10, 12 ) carrying an amino group as a pendant arm have been synthesized and their complexation properties towards Ni²⁺ and Cu²⁺ studied. The crystal structures of the Cu²⁺ complexes with 10-methyl-1,4-dithia-7,10-diazacyclododecane-7-ethanamine ( 3 ) and 11-methyl-1,4-dithia-8,11-diazacyclotetradecane-8-ethanamine ( 10 ) show that, in both cases, the Cu²⁺ is pentacoordinated by the four donor atoms of the macrocycle and the amino group of the side chain. In aqueous solution, however, two forms of the complexes with stoichiometries [MLH] and [ML] (M = Cu²⁺ or Ni²⁺) have been observed. In [MLH], the amino group is protonated and does not bind to the metal ion, whereas in [ML] the amino group is bound, and a pentacoordinated geometry results. The pK_a values for the equilibrium [ML] + H⁺?[MLH]⁺ decrease in the order 12 > 10 > 3 , indicating that the 2-aminoethyl side chain binds better to the Cu²⁺ than the 3-aminopropyl side chain. Cyclic voltammetry for the Cu²⁺/Cu⁺ pair shows that the 2-aminoethyl pendant arm stabilizes the Cu²⁺ oxidation state, when the metal ion is in the 14-membered ring ( 10 ), whereas it stabilizes Cu⁺ for the 12-membered macrocycle ( 3 ).     

Metal Complexes with Macrocyclic Ligands,V. Formation and dissociation kinetics of the pentaco-ordinated Ni2+, Cu2+, Co2+ and Zn2+ complexes with 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane

The formation and dissociation kinetics of the pentaco-ordinated Cu²⁺, Ni²⁺, Co²⁺ and Zn²⁺ complexes with 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane (4-MeCyclam-14) was studied by pH-stat techniques and spectrophotometrically. The rates of the reactions between 4-MeCyclam-14 and each of the four metal ions, although slower than normal complexations by a factor of 10³?10⁴, closely follow the order Cu²⁺ > Zn²⁺ > Co²⁺ > Ni²⁺, found for the rate of water exchange. This implies that beside water exchange an other constant factor plays an important role in the rate determing step. The dissociation of the pentaco-ordinated 4-MeCyclam-14 complexes is acid catalyzed. The limiting rate for acid dissociation is not reached even in 2.5M HNO₃ in the case of Ni(4-MeCyclam-14)²⁺. From the formation and dissociation rates stability constants have been calculated, which do not show any macrocyclic effect.     

Metal Complexes with Macrocyclic Ligands. Part XXVIII.. Structures and stabilities of the Cu2+ complexes with 1,4,7-triazacyclononane-1-acetic acid

The potentiometric study of the complexation of 1,4,7-triazacyclononane-l-acetic acid ( 1 ) with Cu²⁺ (I = 0.5 (KNO₃), T = 25°) indicates the presence of the species [Cu( 1 )], [Cu( 1 )OH], [Cu( 1 )₂], and [(Cu( 1 ))₂OH], the stability constants of which are determined. The two complexes [Cu( 1 )]ClO₄ and [(Cu( 1 )₂)OH]ClO₄ were also characterized by X-ray structure analysis. In both cases, the Cu²⁺ ion is in a distorted square-pyramidal arrangement, penta-coordinated by the three N-atoms of the macrocycle, an O-atom of the carboxylate, and an additional O-atom either from a second carboxylate or from an OH^?, acting as a bridge between two metal centres.     

Metal Complexes with Macrocyclic Ligands. Part XXIX.. Structural and kinetic studies of two isomeric Cu2+ complexes with 1,4-dimethyl-8-[2-(2-pyridyl)ethyl]-1,4,8,11-tetraazacyclotetradecane

The synthesis and complexation properties of 1,4-dimethyl-8-[2-(2-pyridyl)ethyl]-1,4,8,11-tetraazacyclotetra-decane ( 2 ) are described. This ligand forms with Cu²⁺ two complexes, one of which has been characterized by X-ray structure analysis. The structural, spectral, and kinetic studies indicate that the two Cu²⁺ complexes are isomers with the macrocycle in the trans-III and trans-I configuration. The rate of the interconversion of the trans-I isomer to the thermodynamically more stable trans-III species is proportional to [OH^?]. A mechanism for this reaction is proposed.     

Metal Complexes with Macrocyclic Ligands. Part XXVII. Cu2+-promoted hydrolysis of carboxylic- and phosphonic-acid esters in the side chain of tetraazamacrocycles

The X-ray structures of the Cu²⁺ complexes of 1,4,8,11-tetraazacyclotetradecane derivatives with an ethylpro-pionate and diethylphosphonate group, 5 and 6 , respectively, indicate that the metal ion is pentacoordinated by the four N-atoms of the macrocycle and one O-atom. In the case of 5 , it is the carbonyl O-atom of the carboxylate group, whereas for 6 it is the phosphonyl O-atom of the phosphonate group. The hydrolysis kinetics of the functional group in the Cu²⁺ complexes with the 1,4,8,11-tetraazacyclotetradecanes 3 – 6 have been measured by pH-stat and stopped-flow techniques. The rate law for the hydrolysis of the carboxylates 3 – 5 is proportional to the complex concentration and to [OH^?] up to pH 13, whereas that of the phosphonate 6 is proportional to [OH^?] up to pH 11.5, becoming independent of [OH^?] at pH > 11.5. The mechanisms of these two reactions are discussed, considering the possibility of an intra- or an intermolecular OH^? attack and the results of the X-ray structure analyses.     

Metal Complexes with Macrocyclic Ligands. Part XLVI. Synthesis and structures of dinuclear metal complexes of bis-macrocycles having a pyrazole bridging unit

Three bis-macrocyclic ligands consisting of two N₃-, N₂S-, or NS₂-cyclononane rings, i.e., of two octahydro-1H-1,4,7-triazonine, octahydro-1,4,7-thiadiazonine, or hexahydro-5H-1,4-7-dithiazonine rings, connected by a 1H-pyrazolediyl unit were prepared. They form dinuclear Cu^II and Ni^II complexes which are able to bind one additional exogenous bridging molecule such as Cl^?, Br^?, N, SO, and 1H-pyrazol-1-ide. The structures determined by X-ray diffraction show that each Cu²⁺ is coordinated by the three donor atoms of the macrocyclic ring, by a pyrazolidodiyl N-atom, by an atom of the exogenous bridging ligand, and sometimes by a solvent molecule. In the majority of the Cu²⁺ cases, the metal ion exhibits square-pyramidal or trigonal-bipyramidal coordination geometry, except in the sulfato-bridged complex, in which one Cu²⁺ is hexacoordinated with the participation of a water molecule. The X-ray structure of the azide-bridged dinuclear Ni²⁺ complex was also solved and shows that both Ni²⁺ centres have octahedral coordination geometries. In all complexes, the 1H-pyrazolediyl group connecting the macrocycles is deprotonated and bridges the two metal centres, which, depending on the exogenous ligand, have distances between 3.6 and 4.5 Å. In the dinuclear Cu²⁺ complexes, antiferromagnetic coupling is present. The azido-bridged complex shows a very strong interaction with ?2J ≥ 1040 cm^?1; in contrast, the H-pyrazol-1-ide and chloride bridged species have ?2J values of 300 and 272cm^?1, respectively. Cyclic voltammetry of the Cu²⁺ complexes in MeCN reveals a strong dependence of the potentials Cu^II/Cu-^II → Cu^II/Cu^I → Cu^I/Cu^I on the nature of the donor atoms of the macrocycle as well as on the type of bridging molecule. The more S-donors are present in the macrocycle, the higher is the potential, indicating a stabilization of the Cu¹ oxidation state.     

Metal Complexes with Macrocyclic Ligands. PartXLV Axial coordination tendency in reinforced tetraazamacrocyclic complexes

The Cu²⁺ and Ni²⁺ complexes of three reinforced tetraazamacrocycles, containing a piperazine subunit and one or two alkyl substituents at the other two N-atoms have been prepared and their structural properties studied. In solution, the Ni²⁺ complexes are square-planar and show no tendency to axially coordinate a solvent molecule or an N ion. In contrast, the Cu²⁺ complexes change their geometry depending upon the donor properties of the solvent, being square-planar in MeNO₂ and pentacoordinate in DMF. They also easily react in aqueous solution with N to give ternary species with pentacoordinate geometry, the stabilities of which have been determined. In the solid state, the X-ray crystal structures of three Cu²⁺ complexes also show both geometrical arrangements, two having a square-planar, the other one a distorted square pyramidal geometry. The difference behavior of Ni²⁺ and Cu²⁺ stems from the fact that the structural change from square-planar to square-pyramidal can easily be accomplished for Cu²⁺, whereas, for Ni²⁺, it is accompanied by an electronic rearrangement from the low-spin to the high-spin configuration. The relatively rigid ligands cannot Adapt to the somewhat larger high-spin Ni²⁺ion.     

Metal Complexes with Macrocyclic Ligands. Part XXXI. Protonation studies and complexation properties of tetraazamacrocyclic methylenephosphonates with earth-alkali ions

The three ligands 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetrakis(methylenephosphonic acid) ( 1 ), 1,4,7,11-tetraazacyclotridecane-1,4,7,11-tetrakis(methylenephosphonic acid) ( 2 ), and 1,4,8,11-tetraazacyclotetradecane-1,4,8,1 1-tetrakis(methylenephosphonic acid) ( 3 ) have been synthesized by condensation of the corresponding macrocycles with formaldehyde and phosphorous acid. The protonation and stability constants with the earth-alkali ions have been determined at 25° and I = 0.1 M (Me₄)N(NO₃) by potentiometric titrations. Because of the high values of the first two protonation constants, ¹H-NMR measurements were necessary to determine them. Titrations in different supporting electrolytes (NaNO₃, KNO₃, RbNO₃, CsNO₃, and Me₄N(NO₃)) show that their choice is of paramount importance, as the above ligands can form complexes with alkali-metal ions. The potentiometric results for the earth-alkali ions show that beside mononuclear complexes of different degrees of protonation ([MLH_n], n = 0–4), also binuclear species are formed ([M₂LH_m], m = 0–2). It is interesting that 1 with the smallest macrocyclic ring has the greatest tendency to form binuclear complexes, which are so stable that they partially prevent the formation of the corresponding mononuclear species. For [ML], [MLH], [M₂L], and [M₂LH], the stability sequence is Mg²⁺ < Ca²⁺ > Sr²⁺ > Ba²⁺, whereas for [MLH₂], [MLH₃], and [MLH₄], the stability steadily decreases from Mg²⁺ to Ba²⁺.     

Metal Complexes with Macrocyclic Ligands. Part XL. Syntheses and silver(I) complexes of mono- and disubstituted dithiadiazamacrocycles

A series of N₂S₂-macrocycles with ring sizes varying between 12 and 16, as well as two 12-membered N₂S₂-rings with a pendant carboxylic and amino group, respectively, were synthesized. Their complexation properties towards Ag⁺ were studied by pH titrations and by potentiometry with a silver electrode. The observation that 1:1 ([AgLH₂]³⁺, [AgLH]²⁺, [AgL]⁺) and 1:2 species ([AgL₂H₂]³⁺, [AgL₂H]²⁺, [AgL₂]⁺) were formed is interpreted by postulating that Ag⁺ can bind either to the S-donors only, or to both the N- and S-atoms. The most stable complex [AgL]⁺ in the series of the nonfunctionalized macrocycles was found for the 12-membered N₂S₂-ring 3 . The stability of it increased when an additional donor group was introduced into the side chain. The highest formation constant (logβ₁₁₀ = 14.43(1)) was obtained with the 12-membered ring 12 carrying the ethanamine side chain. In view of a radiochemical application, all Ag⁺ complexes were tested in blood serum for their stability, but were not stable enough against transmetallation.     

Metal Complexes with Macrocyclic Ligands,XVIII. A study of steric effects in the Co2+-, Ni2+- and Cu2+-complexes with 1-(2-aminoethyl)- and 1-(2-dimethylaminoethyl)-4,8,11-trimethyl-1,4,8,11-tetraazacyclotetradecane

The two macrocycles 1-(2-aminoethyl)- and 1-[2-(dimethylamino)ethyl]-4, 8, 11-trimethyl-1, 4, 8, 11-tetraazacyclotetradecane, 1 and 2 , respectively, and their metal complexes with Co²⁺, Ni²⁺ and Cu²⁺ were prepared. The different spectral properties of the complexes with these two ligands can be rationalized by assuming that, in the case of 1 , the amino group of the pendant arm is axially coordinated to the metal ion giving a pentacoordinate structure, whereas the dimethylamino group of 2 cannot bind because of sterical hindrance. This is also corroborated by the observation that the complexes of 2 react with unidentate ligands such as N and SCN^? to give ternary species MLX⁺, whereas those of 1 do not. This indicates that the complexes of 1 have no free coordination site, their coordination sphere being completely saturated by the five N-atoms of the macrocycle, whereas the complexes of 2 having a vacant site still can add an unidentate ligand.     

Metal Complexes of Ditopic and Polytopic Macrocyclic Ligands

Soft Supramolecular Materials (SSM) are multicomponent materials formed bythe bulk supramolecular assembly/aggregation of building units into a regularstructure, with stronger bonding within building units and weaker bondingbetween them. The nature of the building units may vary from simple moleculesto nanoparticles, and the forces linking the units together may vary from coordinativeto van der Waals. Recently SSM have attracted a great deal of attention due to theirwide variability, easy conversion from one structure to another, and active responseto external stimuli. It seems evident that the progress in the chemistry of SSMpredestines the appearance of a new generation of functional and ``smart'' materials.     

Macrocyclic Metal Complexes Bearing Rigid Polyaromatic Ligands: Synthesis and Catalytic Activity

We synthesised palladium and platinum complexes possessing cyclic and acyclic pincer‐type polyaromatic ligands and investigated their structural effect on the catalysis. The pincer‐type bis(6‐arylpyridin‐2‐yl)benzene skeleton was constructed via Kröhnke pyridine synthesis under transition metal‐free conditions on gram‐scale quantity. Ligand structure significantly influenced catalytic activity toward the platinum‐catalysed hydrosilylation of diphenyl acetylenes, despite the ligand‐independence of the conformations and electronic properties of these complexes.     

Metal Complexes of Macrocyclic Ligands. XII. A Complexone-like Tetraazamacrocycle

The complexone-like tetraazamacrocycle 1 (LH₄) forms a series of metal complexes with Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ (M²⁺) of the type MLH₂, ML^2? and M₂L, which have been isolated and characterized by VIS., IR. and NMR. spectroscopy. Based on these results tentative structures for the different species are proposed.     

模板反应及其在含氮大环金属配合物合成中的应用

扼要介绍了模板反应的概念、类型,并举例介绍了在含氮大环金属配合物合成中的应用。     

Metal Complexes with Macrocyclic Ligands. Part XXXII. Reactivity studies of the pendant carboxylic group in a macrocyclic Cu2+ complex towards amide formation and its use as a protein-labelling agent

The Cu²⁺ complex of 1 , having a non-coordinating carboxylic group, can be reacted under the typical conditions of peptide formation with amines such as 2-methylpropylamine or (pyrid-2-yl)methylamine to give, after removal of Cu²⁺ with CN^?, the amides 4 and 5. The Cu²⁺ ion is of paramount importance since it protects the four amino groups of the macrocycle so that the amide condensation can specifically be done with the exogenous amine It is also shown that the Cu²⁺ complex of 1 can be covalently attached to bovine serum albumin (BSA), thus opening the possibility to use this compound as a labelling agent for proteins and antibodies.     

Metal Complexes with Macrocyclic Ligands. Part XLIII. Tetraazamacrocyclic nickel(II) and copper(II) complexes with aliphatic methylthio- and methoxy-substituted pendant chains

The 14-membered tetraazamacrocyclic Ni²⁺ and Cu²⁺ complexes of 4 (1, 4, 8-trimethyl-11-[(2-methylthio)ethyl]-1, 4, 8, 11-tetraazacyclotetradecane), 5 . (1, 4-dimethyl-8, 11-bis[2-(methylthio)ethyl]-l, 4, 8, 11-tetraazacyclotetradecane), and 7 (1, 4, 8, ll-tetrakis[2-(methylthio)ethyl]-1, 4, 8, 11-tetraazacyclotetradecane), with pne, two, and four methylthio-substituted pendant chains, respectively, and the Ni²⁺ complex of 6 (1, 4-dimethyl-8, 11-bis (2-methoxyethyl)-1, 4, 8, 11-tetraazacyclotetradecane), with two methoxy-substituted pendant chains, were synthesized and their chemistry studied with regard to modelling F430. Solution spectra in H₂O, MeCN, and DMF indicate participation of the side chain in metal coordination when the donor group is a thioether, whereas no coordination with the metal ion is observed with the ether group. Similarly the X-ray structures of the thioether-containing compounds [Ni( 5 )](ClO₄)₂, [Cu( 5 )](ClO₄)₂, and [Cu( 7 )](ClO₄)₂ show a coordination number of 5, whereas that of [Ni( 6 )](ClO₄)₂ with ether pendant chains, shows a coordination number of 4. Cyclic voltammetry of these complexes in MeCN reveals that Ni²⁺ is reversibly reduced to Ni⁺ between ?0.64 and ?0.77 V vs. SCE, the potential being influenced by the nature and number of the pendant chains. At more negative potentials, the thioether is cleaved, whereby a thiol is formed; the thiol is then oxidized at ca. + 0.8 V vs. SCE, when a glassy carbon electrode is used, or at ca. 0 V vs. SCE at a dropping Hg electrode. No cleavage of the ether bond in [Ni( 6 )](ClO₄)₂ is observed under similar conditions.