High temperature gas chromatography: The development of new aluminum clad flexible fused silica glass capillary columns coated with thermostable nonpolar phases: Part 1

With the simultaneous development of blank aluminum clad flexible fused silica glass capillary tubing capable of withstanding temperatures up to 500°C, coincident with a series of special high temperature methyl polysiloxane polymers, it was possible to produce for the first time, long lived fused silica capillary columns containing thin films of thermostable stationary phases which could be maintained isothermally at 400425°C and temperature programmed to 425–440°C. The “bleed rate” here for a well conditioned column was 5 picoamperes or less. Under these circumstances, alkanes with carbon numbers in the C-90 to C-100 area were rapidly and efficiently eluted from these columns. By extrapolation here, one can easily detect certain compounds with boiling points in the 750°C range. Since this type of capillary column was found to possess certain favorable properties, it was thought that it will soon replace the packed column and will probably be more popular than the borosilicate capillary column for many high temperature applications. Moreover, evidence has now accumulated which leads us to further believe that the majority of analyses of “high molecular weight” compounds performed by Supercritical Fluid Chromatography (SFC), utilizing very narrow bore fused silica capillary columns at several hundred atmospheres, can be much more simply, much more rapidly, much more economically, and much more efficiently accomplished by gas chromatography utilizing this new generation of high temperature capillary columns.     

Theoretical advantages and drawbacks of on-line,multidimensional liquid chromatography using multiple columns operated in parallel

The theoretical advantages and drawbacks of using a multiple-, parallel column approach in on-line multidimensional liquid chromatography systems were investigated. Much time or peak capacity can be gained with the use of multiple parallel columns at the second-dimension while the aggregate time of separation increases only by the increment of the gradient time of the second-dimension. Multidimensional chromatographic systems are now used to perform many tasks ranging from routine, fast analyses to specialized, arduous separations. In this work, we focus on the advantages of a multiple, parallel columns approach to on-line multidimensional liquid chromatography systems. Calculations of the achievable peak capacities were made as functions of the number of columns operated in parallel. Increasing the number of second-dimension columns from one to two or three causes the largest increase in peak capacity with only a slight increase of aggregate time. We also present some practical aspects to consider when attempting multidimensional separations with multiple columns operated in parallel.     

Fast supercritical fluid chromatography using capillaries packed with nonporous particles

Summary Packed columns containing microparticles provide high column efficiency per unit time and strong retention characteristics compared with open tubular columns, and they are favored for fast separations. Nonporous particles eliminate the contribution of solute mass transfer resistance in the intraparticle void volume characteristic of porous particles, and they should be more suitable for fast separations. In this paper, the evaluation of nonporous silica particles of sizes ranging from 5 to 25 μm in packed capillary columns for fast supercritical fluid chromatography (SFC) using neat CO₂ is reported. These particles were first deactivated using polymethyl-hydrosiloxanes and then encapsulated with a methylphenylpolysiloxane stationary phase. The retention factors, column efficiencies, column efficiencies per unit time, separation resolution, and separation resolution per unit time for fast SFC were determined for various length capillaries packed with various sizes of polymerencapsulated nonporous particles. It was found that 15 μm nonporous particles provided the highest column efficiency per unit time and resolution per unit time for fast packed capillary SFC. Under certain conditions, separations were completed in less than 1 min. Several thermally labile silylation reagent samples were separated in times less than 5 min. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Preparation of glass capillary columns

Summary Glass capillary column chromatography is the most rapidly growing part of gas chromatography. There are many complex new analytical tasks and they require special capillary columns. Fortunately there is a wide range of column preparation methods available, and they make the preparation of glass capillary columns a more varied job than that of packed columns. In this paper these methods are reviewed and suggestions are given for making task-oriented columns.     

Packed column supercritical fluid chromatography with light-scattering detection. II. Retention behaviour of squalane and glucose with mixed mobile phases

Summary Evaporative light scattering detectors can be used to detect organic substances without chromophoric groups in packed column supercritical fluid chromatography (SFC). A detector of this type has been used to detect squalane and glucose after SFC with various packed columns and binary mobile phases. In this study, the amount of organic modifier in carbon dioxide/modifier mixtures was varied. The results give further insight into the mechanisms that influence retention behaviour in packed column separations with super- and subcritical mobile phases. Squalane is an ideal non-polar test solute which shows long retention times on non-polar columns while its elution can be accelerated by non-polar modifiers in carbon dioxide. Glucose is an extremely polar solute containing hydroxyl groups. Elution of this sugar can be improved with polar modifiers. Column packings with polar end groups lead to high capacity ratios and long retention times for glucose. Most columns used in this study contained silica-based packing materials. For purposes of comparison, a polymeric packing (HEMA RP-18) was also employed.     

A strategy to develop fast RP-HPLC methods using monolithic silica columns

Since the appearance of monolithic silica, much work has been done describing the properties of monolithic silica columns. Meanwhile the transferability of analytical methods from conventional to monolithic silica columns has been intensively investigated [1-5]. RP HPLC method development strategies for conventional columns should be updated or scaled to meet the higher performing monolithic column technology. Because of the high permeability of monolithic silica columns it should be possible to decrease the time for method development by applying high isocratic flow rates. Here we suggest a clear strategy for method development using monolithic columns. The strategy will be applicable for various sample compositions, e. g., acidic, basic, or neutral. The applicability of monolithic columns for especially complex separations of basic mixtures without the need of using a highly basic mobile phase that harms the column will be pointed out in this work. This work will describe in detail the actual method development process. For better understanding of our strategy, the influence of flow rate, column length, mobile phase composition, pH, and temperature will be discussed. Details about the application of a flow program will be mentioned.     

Pressure drop effects on selectivity and resolution in packed column supercritical fluid chromatography

The influence of pressure drop on retention, selectivity, plate height and resolution was investigated systematically in packed supercritical fluid chromatography (SFC) using pure carbon dioxide as the mobile phase. Numerical methods developed previously which enabled the prediction of pressure gradients, diffusivities, capacity factors, plate heights and resolutions along the length of the column were used for the model calculations. The effects of inlet pressure and supercritical fluid flow rate on selectivity and resolution are studied. In packed column SFC with pure carbon dioxide as the mobile phase, the pressure drop can have a significant effect on resolution. The flow rate is shown to have a larger effect than generally realized. The calculated data are shown to be in good agreement with the experimental results. Finally, the variation of the chromatographic parameters along a 5.5 meter long model SFC column is illustrated. The possibilities and limitations of using long packed columns in SFC are discussed. It is demonstrated that long columns with large plate numbers do not necessarily yield better separations.     

Columns in analytical-scale supercritical fluid chromatography: From traditional to unconventional chemistries

Within this review, we thoroughly explored supercritical fluid chromatography (SFC) columns used across > 3000 papers published from the first study carried out under SFC conditions in 1962 to the end of 2022. We focused on the open tubular capillary, packed capillary, and packed columns, their chemistries, dimensions, and trends in used stationary phases with correlation to their specific interactions, advantages, drawbacks, used instrumentation, and application field. Since the 1990s, packed columns with liquid chromatography and SFC-dedicated stationary phases for chiral and achiral separation are predominantly used. These stationary phases are based on silica support modified with a wide range of chemical moieties. Moreover, numerous unconventional stationary phases were evaluated, including porous graphitic carbon, titania, zirconia, alumina, liquid crystals, and ionic liquids. The applications of unconventional stationary phases are described in detail as they bring essential findings required for further development of the supercritical fluid chromatography technique.     

High temperature gas chromatography: The development of new aluminum clad flexible fused silica glass capillary columns coated with thermostable nonpolar phases: Part 2

Samples, representative of certain classes of “high molecular weight” and/or less volatile substances, were analyzed by gas chromatography utilizing a new generation of aluminum clad flexible fused silica glass capillary columns containing thin films of a methyl polysioxane stationary phase capable of being operated isothermally to 400–425°C and temperature programmed to 425–440°C. The results obtained here were compared with those described in the literature discussing the latest advances in Supercritical Fluid Chromatography (SFC) in the analysis of precisely the same types of samples. In all instances, the gas chromatographic method provided superior speed of analysis, superior column efficiency, and superior resolution of the component bands. This was due to fundamental factors, favoring the diffusivity of the solutes in both the gas and liquid phases in this process at these high temperatures. Under these circumstances, it is thought that the strength of SFC mainly lies in the analysis of thermally labile samples until the advocates of this technique make more definitive strides in the handling of still higher molecular weight substances well beyond the newly expanded range of gas chromatography.     

Quantitation in miniaturized GC and SFC systems

Separations of high efficiency and/or speed can be achieved in capillary GC by capillary columns of lower internal diameter (< 50 μm). Sampling techniques for the analytical application of narrow bore fused silica columns have been evaluated with regard to quantitation. On-column injection cannot be applied. Therefore liquid samples have to be vaporized in external devices before they enter the chromatographic system. Sample introduction by syringe with subsequent splitting must and can be applied but requires special syringes with perfect piston sealing because of the high inlet pressures needed even with hydrogen as carrier gas. For general analytical applications, valve systems should be developed to eliminate both the syringe and the septum from instrumental GC set-up's. In SFC using either narrow bore capillary or packed microbore columns, time-controlled valve sampling with partial displacement of the sample from the loop seems to be an adequate technique because of the very high inlet pressures involved. Splitting in combination with valve operation can also be applied in capillary SFC at least to samples of good solubility in the mobile phase. A disadvantage of splitting in SFC is that another restriction for the adjustment of the split flow is necessary.     

The contribution of the pressure drop to analyte retention in coupled column supercritical fluid chromatography of lipids

Summary This paper reports the qualitative and quantitative effects of the column pressure drop on the retention of lipid components in a serially coupled capillary column SFC system. The contribution of the pressure drop consists of two components, the density effect and the flow effect. The magnitude of the flow effect,i. e. the change in retention which results from changes in the flow-rate when column pressures are changed, is determined by the difference in single column analyte k values. The effect will be positive compared with the uncorrected retention values when the column with largest k value is closest to the injector. With the columns in reversed order, the effect will be negative. The contribution from the density effect always resulted in larger coupled column k values and was in most instances of more significance than the flow effect component. Values calculated with and without pressure drop correction have been compared and it has been shown that for most of the eighteen model lipid compounds investigated, the deviations from the experimental retention factors were smaller when pressure drop corrections were made.     

Characterization of the efficiency of microbore liquid chromatography columns by van Deemter and kinetic plot analysis

The efficiency of miniaturized liquid chromatography columns with inner diameters between 200 and 300 μm has been investigated using a dedicated micro‐liquid chromatography system. Fully porous, core–shell and monolithic commercially available stationary phases were compared applying van Deemter and kinetic plot analysis. The sub‐2 μm fully porous as well as the 2.7 μm core–shell particle packed columns showed superior efficiency and similar values for the minimum reduced plate heights (2.56–2.69) before correction for extra‐column contribution compared to normal‐bore columns. Moreover, the influence of extra‐column contribution was investigated to demonstrate the difference between apparent and intrinsic efficiency by replacing the column by a zero dead volume union to determine the band spreading caused by the system. It was demonstrated that 72% of the intrinsic efficiency could be reached. The results of the kinetic plot analysis indicate the superior performance of the sub‐2 μm fully porous particle packed column for ultra‐fast liquid chromatography.     

Instrumental considerations for the effective operation of short,highly efficient fused-core columns. Investigation of performance at high flow rates and elevated temperatures

Fused core or superficially porous columns offer the advantages of higher efficiency compared with totally porous columns of the same particle size, but similar operating pressures. However, their performance may be adversely affected by extra-column effects that become more significant as the column efficiency increases, and as the diameter of the column is reduced. In this study, we show that 10 cm × 0.46 cm fused-core columns can be used on modified conventional instruments (“microbore systems”) without serious loss in performance, and this approach is at present likely to yield superior results compared with use of 0.21 cm columns (of identical efficiency) on current UHPLC instruments that have minimised extra-column volume. Furthermore, the true efficiency of commercial narrow-bore fused-core columns appears to be reduced compared with those of conventional bore, which may be due to packing difficulties for the former type. The fused-core columns in general gave excellent performance, showing no evidence of an upturn in the Knox plots at high flow velocities and elevated temperatures. Careful control of experimental conditions is necessary to ensure accurate data for these plots.     

Fast headspace analysis with short microcapillary columns

Summary A new method of analysis using headspace gas chromatography with microcapillary columns is proposed. Small diameter (50 μm I.D.) fused-silica capillary columns with non-extractable SE-54 and PS-255 polysiloxane stationary phases were used for the analysis of low boiling organic compounds. The small diameter columns possess the usual very high efficiency so that the method can be employed for the headspace analysis of complex mixtures. The use of short microcolumns reduces the analysis times in comparison to conventional capillary columns. Good performances were obtained in the analysis of volatile compounds in some lemon essential oil, perfumes, and water samples.     

The effect of elevated temperature on conventional stationary phases used in SFC

Summary The effect of elevated temperatures on conventional packed bonded-phase columns used in supercritical-fluid chromatography (SFC) has been investigated. The impact of column conditioning temperature on the capacity factor, peak width, and peak asymmetry on octadecyl and propylamino columns from five commerical suppliers is reported.     

Analysis of native carotenoid composition in orange juice using C30 columns in tandem

In the present contribution, a novel analytical approach based on using serial coupled conventional LC columns is proposed to the study of the native carotenoid composition of orange juice. The great difficulties that are found when analyzing complex carotenoid samples, due to the high natural variability of these compounds as well as to the presence of carotenoid esters are well documented. To overcome some of these limitations, we have developed a methodology including the study of both the saponified and the intact sample by means of two different LC-DAD/APCI-MS methods. The increase in the resolution and separation power obtained when using two serial coupled C(30) columns is demonstrated, and significant increases in peak capacity have been achieved. By using this new methodology, 44 different carotenoids have been tentatively identified. Among them, several violaxanthin diesters have been directly identified in orange juice for the first time. The main carotenoids in orange juice were violaxanthin, lutein, luteoxanthin, 9-cis-antheraxanthin, and beta-cryptoxanthin. Some of them were found in both their free and esterified forms. To the best of our knowledge, this is the first application of serial couplings of C(30) columns for the identification of the native carotenoid composition of natural matrices.     

Fast supercritical fluid chromatography of polymers using packed capillary columns

Summary Fast separations of perfluorinated polyethers and polymethylsiloxanes that are composed of 50–80 oligomers were demonstrated in packed capillary column supercritical fluid chromatography (SFC) using a carbon dioxide mobile phase. Separations were accomplished within 10 min using a 13 cm×250 μm i.d. column packed with 2 μm porous octadecyl bonded silica (ODS) particles. Effects of particle diameter of the packing material and pressure programming on separation were investigated, and packed column SFC was compared with open tubular column SFC. Results show that as the particle diameter was decreased from 5 to 3 to 2 μm and the column length was reduced from 85 to 43 to 13 cm, the separation time could be reduced from 70 to 20 to 10 min while still maintaining similar separation (resolution). Short columns packed with small porous particles are very suitable for fast SFC separations of polymers.     

Experiments with capillary columns having unconventional cross-sectional geometry

The potentials of unconventional capillary columns, e.g. flat, crinkled, whisker and helically coiled open-tubular columns (HOT columns) were evaluated. In comparison to circular columns, no improvement in the column performance, when used under normal capillary GC circumstances, could be observed.     

Rapid concentration of organics from aqueous solutions through uncoated capillary columns: A new approach to purification and ultratrace analysis

Summary A new technique has been developed for the concentration of organics in aqueous solutions. Volumes greater than 100 ml can be utilized in this system, which previously could not have been done without a distillation or solvent extraction procedure. The method is based on the passage of the solution through uncoated capillary columns of various materials such as polyethylene, copper, aluminum, nickel, and many other metal and/or polymer columns of different dimensions. It is possible to achieve trace level analysis at the ppb to ppt level without the interferences inherent in other existing methods. The purification of solvents has been successfully demonstrated in this preliminary study, and will be discussed along with our suggestions for future investigations.Paper presented at the 21st Symposium on Advances in Chromatography, Oslo, Norway, June 3–6, 1985.     

A comparative study of large volume injection techniques for microbore columns in HPLC

Summary This paper focuses attention on the potentially larger signal-to-noise ratios produced by microbore columns in comparison with conventional columns. The increased chromatographic signals by the application of microbore columns are due to the lower chromatographic dilution of elution profiles which are proportional to the square of the column inner radius. Generally less than 1μl sample should be injected into microbore systems to obtain the full benefit of the column performance. However, since more sample can be loaded on conventional columns compared to microbore columns the advantage of improved signal-to-noise ratio can only be realised in situations where very little sample is available. To inject more than 1μl sample, at the same time avoiding extra band-broadening effects, suitable injection techniques must be available. In this study three injection methods for microbore systems that meet this condition, are studied and compared.