The synthesis of a precursor of polybenzimidazole (PBI) and blends with polyamic acid (PAA)

The precursor of polybenzimidazole (PBI), poly(3,3′-diamino-4,4′-benzidine isophthalamide) (PDABI), was synthesized from poly(3,3′-dinitro-4,4′-benzidine isophthalamide) (PDNBI) by reduction. With increasing temperature, the NH₂ moiety which was protected by SnCl₅^?1 could cyclize and form PBI. Blends with polyamic acid (LaRC-TPI) were prepared. Clear blend films were prepared at up to 400°C. The IR spectra displayed shifts in the NH stretching band, thereby providing evidence for specific interactions related to the miscibility of their cured blends. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of aromatic polyimides derived from 2,2,′3,3′‐biphenyltetracarboxylic dianhydride

2,2,′3,3′‐Biphenyltetracarboxylic dianhydride (2,2,′3,3′‐BPDA) was prepared by a coupling reaction of dimethyl 3‐iodophthalate. The X‐ray single‐crystal structure determination showed that this dianhydride had a bent and noncopolanar structure, presenting a striking contrast to its isomer, 3,3,′4,4′‐BPDA. This dianhydride was reacted with aromatic diamines in a polar aprotic solvent such as N,N‐dimethylacetamide (DMAc) to form polyamic acid intermediates, which imidized chemically to polyimides with inherent viscosities of 0.34–0.55 dL/g, depending on the diamine used. The polyimides from 2,2,′3,3′‐BPDA exhibited a good solubility and were dissolved in polar aprotic solvents and polychlorocarbons. These polyimides have high glass transition temperatures above 283°C. Thermogravimetric analyses indicated that these polyimides were fairly stable up to 500°C, and the 5% weight loss temperatures were recorded in the range of 534–583°C in nitrogen atmosphere and 537–561°C in air atmosphere. All polyimides were amorphous according to X‐ray determination. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1425–1433, 1999     

Miscible blends of nitro‐substituted polybenzimidazole and polyetherimide

A novel blend system was prepared by blending organosoluble nitro‐substituted polybenzimidazole (NO₂‐PBI) and polyetherimide (PEI) in a cosolvent at a moderate condition. It was shown that the NO₂‐PBI/PEI blends not only possess tractable processability owing to the enhanced solubility of NO₂‐PBI but also retain the desirable features of unmodified PBI/PEI blends. Apparent miscibility in the blends was observed and attributed to hydrogen‐bonding interactions between N? H groups in NO₂‐PBI and carbonyl groups in PEI. It was revealed that the NO₂‐PBI/PEI blends phase‐separate upon heating above the glass‐transition temperatures. The observed mixing of NO₂‐PBI and PEI in a molecular level, although sustainable only in the glassy region, was shown to lend synergy effects to the physical properties of the blends. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1778–1783, 2001     

Miscibility behavior and reequilibration of binary poly(amic acid) mixtures

Five poly (amic acid) solutions based on PMDA-PDA, PMDA-ODA, PMDA-6F, ODPA-ODA, and 6FDA-ODA were prepared in N-methylpyrrolidone at a polymer concentration of ca. 10 wt %. From these five poly (amic acid) solutions, six different binary blends were prepared: PMDA-PDA/PMDA-ODA, PMDA-PDA/PMDA-6F, PMDA-ODA/6FDA-ODA, PMDA-ODA/ODPA-ODA, PMDA-PDA/ODPA-ODA, and PMDA-PDA/6FDA-ODA. These blends were then characterized with respect to miscibility in the ternary state (polyamic acid-1/polyamic acid-2/N-methylpyrrolidone), the condensed state (ca. 70 wt % polymer), and the fully imidized state. All blends except for PMDA-PDA/PMDA-6F yielded homogeneous mixtures in the ternary solution of 10 wt % polymer concentration. The PMDA-PDA/PMDA-6F mixture eventually became homogeneous after 10 days of mixing at room temperature. Upon solvent evaporation (condensed state) and full cure (imidized state) two blends incorporating ODPA-ODA as one of the components exhibited apparent miscibility as evidenced by optical microscopy. The remaining blends exhibited large-scale phase separation upon solvent evaporation with no significant differences in the overall morphology between the condensed and imidized state. However, as in the case of the PMDA-PDA/PMDA-6F ternary system, the morphology in the condensed and imidized state was strongly dependent on the mixing time of the precursor poly(amic acid) components; the phase-separated domain size decreased with increasing mixing time, eventually leading to complete miscibility. These results are discussed with respect to the proposed “polymer-monomer” reequilibration reaction as well as its implications with respect to the preparation of polyimide molecular composites.     

Synthesis and characterization of BTDA-based polyamide-imides

A series of thermally-stable, tough, linear polyimides containing amide linkages were prepared. These materials have potential as high temperature films and coatings as well as matrix resins in graphite reinforced structures. The new polyamide-imides were prepared by reacting a group of isomers of diaminobenzanilide (DABA) with 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) to form the polyamide-acid with subsequent thermal conversion to the polyamide-imide (PAI). Four polymers were synthesized from unsubstituted amide diamines and two others from N-substituted amide diamines. The properties of these polyamide-imides were compared to those of the polyimide of benzophenonetetracarboxylic dianhydride/3,3′-diaminobenzophenone (LARC–TPI) because their structures are similar, except for the presence of the more flexible amide linkages. These polymers exhibited high inherent viscosities and glass transition temperatures. They were made into tough, flexible films which showed good thermal stability and good resistance to organic solvents. Mechanical properties of the PAI films were better than those of LARC–TPI. Films of the 4,4′-isomer polyamide-imide exhibited an exceptionally high modulus and toughness during impact evaluation.     

Complete miscibility of ternary aryl polyesters demonstrating a new criterion and horizon for miscibility characterization

A ternary miscible blend system comprising only crystallizable aryl polyesters [poly(ethylene terephthalate), poly(trimethylene terephthalate), and poly(butylene terephthalate)] was characterized with the criteria of thermal analyses, microscopy, and X‐ray characterizations. The reported ternary miscibility (in the quenched amorphous state of blends of the three aryl polyesters) was truly physical and under the condition of no chemical transesterifications; this justified that transesterification was not a necessary condition for miscibility in polyester blends in this case. This study further proposed and tested a novel concept of a new criterion for miscibility characterization for polymer blends of only crystallizable polymers. A single composition‐dependent cold‐crystallization‐temperature (T_cc) peak in blends of only semicrystalline polymers was taken as an indication of an intimate mixing state of miscibility. The theoretical background for establishing the single composition‐dependent T_cc peak as a valid miscibility criterion for crystallizable polymer blends was examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2394–2404, 2003     

Effect of structure on properties of aromatic-aliphatic polybenzimidazoles. II

Polybenzimidazoles (PBI) with p-phenylene and/or cis-vinylene groups in the backbone were prepared from terephthalic acid (T), maleic acid (M), and 3,3′ diamino-benzidine tetrahydrochloride dihydrate (DAB) in poly(phosphoric acid) (PPA). Five polymer samples were prepared by varying the M:T molar ratios in the following order: 1:0, 1:1, 2:1, 1:2, and 1:4. The polymers were characterized by intrinsic viscosity, density, electronic fluorescence, and IR spectra. The effect of composition on the solubility of the polymers in various organic solvents was also investigated. The relative thermal stability of the polymers was evaluated by dynamic thermogravimetry in air and polybenzimidazoles (PBI) with cis-vinylene groups were found to be less stable.     

Synthesis and blend behavior of high performance homo- and segmented thermoplastic polyimides

New synthetic methodology was developed as part of an effort to increase the processibility of high Tg polyimide homo⁻ and copolymers, suitable as matrix resins and structural adhesives. Molecular weight and end group control together with solution imidization techniques were successfully employed to convert a variety of poly(amic acid) intermediates to fully cyclized polyimides. The solution imidization was conducted in N-methylpyrrolidone (NMP) with o-dichlorobenzene used as the azeotroping agent at 165–190°C. This technique has produced products which are more soluble than polyimides prepared previously by bulk thermal cyclization of poly(amic acids) at temperature of 300°C. They are also more stable than “chemically” imidized materials. In addition, incorporation of the monofunctional reagent phthalic anhydride provides nonreactive phthalimide end groups and controlled molecular weight. This latter feature significantly further improved the melt and solution processibility of the resulting polyimides. In this study thermoplastic, fully cyclized polyimides of 10 000, 20 000, and 30 000 M̄n were prepared which displayed glass transition temperatures ranging from 260–353°C, with the highest T_g observed with phthalimide capped polyimide systems derived from 6F-dianhydride and p-phenylene diamine. Tough, transparent films were prepared from polymers of 20 000 and 30 000 g/mol by casting from NMP solution or by compression molding at 50–70°C above the glass transition temperature. For purposes of molecular weight assessment, t-butyl phthalic anhydride was used as the end blocker. This permitted 400 M-Hertz proton NMR to be used for assessing the concentration of end groups. Comparison of the 18 aliphatic protons at the end of the chain allowed M̄n values to be determined, which agreed well with theory. A series of poly(arylene ether ketone)/aromatic polyimide blends were investigated to determine the influence of structural variation and composition on miscibility. As an extension to the PEEK^TM/Ultem^TM blend system, which has been reported to be miscible over all proportions, this study examined how structural variations in both the poly(arylene ether ether ketone) and the polyimide portions affect miscibility. In particular, replacement of the hydroquinone fraction in PEEK^TM with bisphenol A or sulfonyl diphenol produced an amorphous polymer which was no longer miscible with Ultem^TM. Polyimide structures modified by employing 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and 4,4′-[1,4-phenylene-bis-(1-methyl ethylidene)] bisaniline (Bis P) diamine to obtain higher glass transition temperatures were also investigated. This system afforded homogeneous blends with PEEK^TM when the (Bis P) diamine was utilized in the synthesis of the polyimide. Furthermore, up to 50 mole percent of hexafluoro-bis-dianhydride (6FDA) could be substituted for BTDA without loss of miscibility. However, when the more polar 3,3′-diaminodiphenylsulfone diamine was employed, immiscible blends resulted. An additional important variant has been to incorporate polyimide siloxane segmented copolymers into the PEEK^TM blend system. The polyimide segment can be designed to be miscible whereas the siloxane portion is homogeneously dispersed into a second phase which, in fact, enriches the surface behavior quite dramatically in siloxane content. The latter could be of some importance in allowing for atomic oxygen resistance and possibly improved flame resistance behavior.     

N-methyl-substituted aromatic polyamides

A series of N-methyl-substituted aromatic polyamides derived from the secondary aromatic diamines 4,4′-bis(methylamino)diphenylmethane, 3,3′-bis(methylamino)diphenylmethane, 4,4′-bis(methylamino)benzophenone or 3,3′-bis(methylamino)benzophenone and isophthaloyl dichloride, and terephthaloyl dichloride or 3,3′-diphenylmethane dicarboxylic acid dichloride was prepared by high-temperature solution polymerization in s-tetrachloroethane. Compared with analogous unsubstituted and partly N-methylated aromatic polyamides, the full N-methylated polyamides exhibited significantly lower glass transition temperatures (T_g), reduced crystallinity, improved thermal stability, and good solubility in chlorinated solvents.     

Synthesis and properties of poly(imide-sulfonate)s

Polycondensations of N,N′-bis(hydroxyalkyl)pyromellitic diimides, N,N′-bis(hydroxyphenyl)-pyromellitic diimides, N,N′-bis(hydroxyalkyl)-3,3′,4,4′-benzophenonetetracarboxylic diimides and N,N′-bis(hydroxyphenyl)-3,3′-4,4′-benzophenonetetracarboxylic diimides with aromatic disulfonyl chlorides were carried out in pyridine to produce poly(imide-sulfonate)s. The resulting polymers had inherent viscosities in the range of 0.25–0.38 dL/g. These poly(imide-sulfonate)s were insoluble in common organic solvents and had relatively good thermal stability. The TGA data showed 10% weight losses at 253–365°C and residual weights at 500°C were 22–72% in nitrogen.     

Phase Behavior of Polymer Blends

The present report deals with some results on phase behavior, miscibility and phase separation for several polymer blends casting from solutions. These blends are grouped as the amorphous polymer blends, blends containing a crystalline polymer or two crystalline polymers. The blends of PMMA/PVAc were miscible and underwent phase separation at elevated temperature, exhibited LCST behavior. The benzoylated PPO has both UCST and LCST nature. For the systems composed of crystalline polymer poly(ethylene oxide) and amorphous polyurethane, of two crystalline polymers poly(-caprolactone) and poly[3,3,-bis-(chloromethyl) oxetane], appear a single T_g, indicating these blends are miscible. The interaction parameter B's were determined to be –14 J cm^–3, –15 J cm^–3 respectively. Phase separation of phenolphthalein poly(ether ether sulfone)/PEO blends were discussed in terms of thermal properties, such as their melting and crystallization behavior.This revised version was published online in November 2005 with corrections to the Cover Date.     

Blends of a novel high-temperature poly(oxy-1,4′-diphenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) with poly(ether imide): structure, interaction, and miscibility

 Polymer miscibility has been discovered in a blend system comprising poly(ether imide) (PEI) and a new poly(ether diphenyl ether ketone) (PEDEK). The miscibility of the PEDEK/PEI polymer system (quenched from the molten state) was investigated in this study using differential scanning calorimetry and Fourier transform (FT-IR) spectroscopy. A composition-dependent single glass-transition temperature (T _g) in the PEDEK/PEI blends over a full composition range was observed; the sharp transition width and the T _g–composition relationship both suggest that the scale of mixing is fine and uniform. Evidence based on observation of the cold-crystallization peak and suppression of the blend crystallinity and melting peak also indicated intimate intermolecular mixing. The FT-IR result yielded further evidence that the physical interactions leading to miscibility were weak, with no apparent specific interactions between the constituent polymers. Relationships between structures and interactions responsible for the miscibility in PEI and several ether-ketone-type polymers are briefly discussed. Received: 8 July 1999 Accepted in revised form: 21 October 1999     

Miscible blends prepared from two crystalline polymers

Differential scanning calorimetry was used to determine the miscibility behavior of several polyester/Saran blends, the two polymers forming these blends being semicrystalline. It was found that Saran is miscible with polycaprolactone (PCL), polyvalerolactone, poly(butylene adipate), and poly(hexamethylene sebacate) since a single glass transition temperature T_g was observed at each composition. However, immiscibility was found between Saran and poly(ethylene adipate), poly-(ethylene succinate), poly(β-propiolactone), and poly(α-methyl-α-n-propyl-β-propiolactone) since two T_g's were recorded at several compositions. Blends were then obtained containing, over a wide range of composition, a miscible amorphous phase and two different types of crystals. From melting-point depression data on PCL and Saran crystals, thermodynamic interaction parameters χ were calculated and found to be different for PCL-rich blends and for Saran-rich blends. This result suggests a variation of χ with composition. Saran is a polymer which does not contain α-hydrogens and its miscibility with polyesters may result from a β-hydrogen bonding interaction or a C?O/C? Cl dipole-dipole interaction.     

Hydrazine‐based polyimides from isomeric bis(chlorophthalimide)s

3,3′‐Dichloro‐N,N′‐biphthalimide (3,3′‐DCBPI), 3,4′‐dichloro‐N,N′‐biphthalimide (3,4′‐DCBPI), and 4,4′‐dichloro‐N,N′‐biphthalimide (4,4′‐DCBPI) were synthesized from 3‐ or 4‐chlorophthalic anhydrides and hydrazine in glacial acetic acid. The yield of 3,3′‐DCBPI (90%) was much higher than that of 4,4′‐DCBPI (33%) because of the better stability of the intermediate, 3‐chloro‐N‐aminophthalimide, and 3,3′‐DCBPI. A series of hydrazine‐based polyimides were prepared from isomeric DCBPIs and 4,4′‐thiobisbenzenethiol (TBBT) in N,N‐dimethylacetamide in the presence of tributylamine. Inherent viscosity of these polymers was in the range of 0.51–0.69 dL/g in 1‐methyl‐2‐pyrrolidinone (NMP) at 30 °C. These polyimides were soluble in 1,1,2,2‐terachloroethane, NMP, and phenols. The 5% weight‐loss temperatures (T_5%s) of the polymers were near 450 °C in N₂. Their glass‐transition temperatures (T_gs) determined by dynamic mechanical thermal analysis and differential scanning calorimetry increased according to the order of polyimides based on 4,4′‐DCBPI, 3,4′‐DCBPI, and 3,3′‐DCBPI. The hydrolytic stability of these polymers was measured under acid, basic, and neutral conditions and the results indicated that the order was 3,3′‐DCBPI/TBBT > 3,4′‐DCBPI/TBBT > 4,4′‐DCBPI/TBBT. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4933–4940, 2007     

Synthesis and properties of aromatic poly (ether sulfone)s and poly (ether ketone)s based on methyl-substituted biphenyl-4,4′-diols

Novel methyl-substituted aromatic poly (ether sulfone)s and poly (ether ketone)s were synthesized from combinations of 3,3′,5,5′-tetramethylbipheny-4,4′-diol and 2,2′,3,3′,5,5′-hexamethylbiphenyl-4,4′-diol, and 4,4′-dichlorodiphenyl sulfone and 4,4′-difluorobenzo-phenone by nucleophilic aromatic substitution polycondensation. The polycondensations proceeded quantitatively in a N-methyl-2-pyrrolidone-toluene solvent system in the presence of anhydrous potassium carbonate to afford the polymers with inherent viscosities between 0.86 and 1.55 dL/g. The methyl-substituted poly (ether sulfone)s and poly (ether ketone)s showed good solubility in common organic solvents such as chloroform, tetrahydrofuran, pyridine, m-cresol, and N,N-dimethylacetamide. The tetramethyl- and hexamethyl-substituted aromatic polyethers had higher glass transition temperatures than the corresponding unsubstituted polymers, and did not decompose below 350°C in both air and nitrogen atmospheres. The films of the methyl-substituted poly (ether ketone)s became insoluble in chloroform by the irradiation of ultraviolet light, indicating the occurrence of photochemical crosslinking reactions. © 1994 John Wiley & Sons, Inc.     

Syntheses and properties of aromatic polyamides and polyimides based on N-phenyl-3,3-bis[4-(p-aminophenoxy) phenyl] phthalimidine

N-Phenyl-3,3-Bis[4-(p-aminophenoxy)phenyl] phthalimidine ( II ) was used as a monomer with various aromatic dicarboxylic acids and tetracarboxylic dianhydrides to synthesize polyamides and polyimides, respectively. The diamine II was derived by a nucleophilic substitution of N-phenyl-3,3-bis(4-hydroxyphenyl) phthalimidine with p-chloronitrobenzene in the presence of K₂CO₃ and then hydro-reduced. Polyamides IV _a-g having inherent viscosities of 0.55–1.64 dL/g were prepared by the direct polycondensation of the diamine II with various aromatic diacids using triphenyl phosphite and pyridine as condensing agents. All the aromatic polyamides were amorphous and readily soluble in various polar solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide, dimethylsulfoxide, and N-methyl-2-pyrrolidone (NMP). Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polyamides had glass transition temperatures in the range of 293–319°C and 10% weight loss occurred up to 480°C. The polyimides were synthesized from diamine II and various aromatic dianhydrides via the two-stage procedure that included ring-opening polyaddition in DMAc to give poly(amic acid)s, followed by thermal or chemical conversion to polyimides. Most of the aromatic polyimides obtained by chemical cyclization were found to be soluble in NMP, m-cresol, and o-chlorophenol. These polyimides showed almost no weight loss up to 500°C in air or nitrogen atmosphere. © 1994 John Wiley & Sons, Inc.     

Liquid-Crystalline copolymers and polymer blends containing electron donor and acceptor groups: Effects of mesogenic structures on the smectic phase and the miscibility

Side-chain liquid-crystalline copolymers and polymer blends containing an electron-donating (carbazolylmethylene)aniline group and electron-accepting nitrophenyl groups with various central linking groups between aromatic groups in the mesogenic units, i.e., N?CH, CH?CH, N?N, and COO, were prepared to examine effects of the mesogenic structure on thermal behaviours. The most remarkable effects of the central linking group on the thermal properties and the miscibility were observed for the polymer blends. The 1:1 miscible polymer blends were prepared from the electron-donating polymer containing (carbazolylmethylene)aniline group (PM6C_z) and the electron-accepting polymers with similar central linking groups, i.e., N?CH, CH?CH, and N?N. For example, the 1: 1 polymer blend of PM6C_z and the electron-accepting polymer containing the nitrostilbene group induced a smectic phase from 73 to 207°C. This isotropic temperature was 46°C higher than the calculated value (161°C) based on the composition without the electron donor-acceptor interaction. On the other hand, the 1: 1 polymer blend of PM6C_z and the electron-accepting polymer containing the nitrophenylbenzoate group showed phase separation. Thus, the remarkable thermal stability and the miscibility of the polymer blends containing the electron donor and acceptor groups might be caused by planar structures between the mesogenic side groups which have similar central linking groups through the electron donor-acceptor interaction. A similar tendency was seen for copolymers and binary mixtures of both low-molecular-weight compounds containing the same mesogenic groups. © 1995 John Wiley & Sons, Inc.     

Characterization and comparison of poly(aryl ether ketone)s containing dibenzoylbiphenyl moieties: Effects of changes in biphenyl substitution pattern on thermal and mechanical properties

A monomer, 3,3′-bis (4-fluorobenzoyl) biphenyl, was prepared in high yield in two steps from inexpensive 3-chlorobenzoyl chloride and fluorobenzene, and polymerized by nucleophilic displacement reaction with various bisphenol monomers in tetramethylene sulfone to produce a series of high molecular weight poly(aryl ether ketone)s containing 3,3′-dibenzoylbiphenyl (DBBP) moieties. The spectroscopic, thermal, and thermomechanical properties of these polymers and related isomeric polymers having 2,2′-and 4,4′-DBBP units were determined and compared to study the effects of changes in the substitution pattern of the biphenyl unit. Except for the 2,2′-DBBP series of polymers, T_gs were found to increase with increasing linearity of the DBBP unit. The 2,2′-DBBP series of polymers had exceptionally high T_gs due to the sterically restricted motions in the biphenyl unit caused by the 2,2′-substitution. In addition, they also showed evidence for torsion with the 2,2′-DBBP unit, whereas in other isomeric polymers the DBBP units are believed to be relatively coplanar. Thermal stabilities and tensile moduli for these polymers proved to be independent of substitution patterns. © 1995 John Wiley & Sons, Inc.     

Preparation of phosphorus-containing polymers-xxi: Synthesis of phosphorus-containing polymaleimide-amines

The reaction of dichloromalcimides with aromatic amines was applied to the preparation of phosphorus-containing polymers, so-called polymaleimide-amines. The phosphorus-containing polymalcimide-amines were synthesized from N,N′-bisdichloromaleimido-3,3′-diphenylalkylphosphine oxides and aromatic diamines or piperazine. Some properties of the resulting polymers, such as solubility and thermal behaviour, were investigated. Most of the polymers were obtained at yields of 80% or above. The reduced viscosities of the polymers, measured at a concentration of 0.2 g/dl in DMA at 30, were 0.13–0.27 dl/g. Some of the polymers, especially those prepared from piperazine, were freely soluble in DMF, DMA, DMSO, cone H₂SO₄, formic acid etc., but all the polymers seemed to decompose in cone H₂SO₄ or formic acid. The phosphorus-containing polymaleimide-amines had poor thermal stability and little flame retardance.     

Investigation into new materials for optical devices: the miscibility and solvent effects of azobenzene derivative blends

With the increasing demand for novel devices with optical applications the search for new materials to data store and process becomes a priority. By introducing blends, tailor made properties and low cost give added advantage. Miscibility is an essential requirement for a new material, this research thus involves miscibility studies of poly(4‐(N‐(2‐methacryloyloxyethyl)‐N‐ethylamino)‐4′‐nitroazobenzene)₉₀‐co‐(methyl methacrylate)₁₀, (azobenzene derivative) with polymethyl‐methacrylate (PMMA), polyvinylacetate (PVAc) and polyvinylchloride (PVC) prepared in tetrahydrofuran (THF), and/or dimethylformamide (DMF) and/or dichloromethane (CH₂Cl₂). The glass transitions, solvent and varying molecular weight effect were investigated, since these all primarily influence the miscibility. THF was found to encourage miscibility at specific compositions of PVAc and PVC blends. However, with CH₂Cl₂ and DMF immiscibility is encouraged. The Fox–Flory equation was applied to the blends analyzing the PVC blends in DMF as deviations from ideality. Different molecular weights of PMMA were identified as immiscible regardless of solvent. PMMA's lower solubility in THF and CH₂Cl₂ compared to the azobenzene derivative, displayed the existence of PMMA islands. In all blends the favorable and unfavorable interactions between polymer–solvent–polymer systems are considered. Furthermore, the miscibility effect on increasing the MMA content of the azobenzene derivative was also investigated. Copyright © 2002 John Wiley & Sons, Ltd.