纳米镍在硝基苯加氢中催化性能的研究

纳米镍在硝基苯加氢中催化性能的研究左东华，张志琨，崔作林（青岛化工学院纳米材料研究所，青岛２６６０４２）关键词纳米镍，催化加氢，硝基苯．硝基化合物加氢还原是化工生产中的一个重要化工单元反应，现今工业生产中大多采用Ｒａｎｅｙ－Ｎｉ作为催化剂。但由于在Ｒ...     

贮氢合金用作硝基苯电解加氢的催化电极研究

贮氢合金用作硝基苯电解加氢的催化电极研究卢世刚，杨汉西，王长发（武汉大学化学系，武汉１３００７２）混合稀土贮氢合金是近年来发展起来的新型功能材料。在室温下它可以吸收比自身体积大几百倍的氢原子形成金属氢化物．这种金属氢化物可作为氢源提供高反应活性的氢原...     

氢化硝基苯合成对氨基酚中活性炭负载铂催化剂的新制备方法研究

采用不同还原剂（甲醛、甲酸、硼氢化钾和氢气）,或于还原Pt(IV)过程中引入少量Pt/AC(AC：活性炭)催化剂“催化”氢气分子,制备了Pt/AC催化剂。其催化氢化硝基苯制对氢基酚的反应结果表明,制备催化剂时所用的还原剂对催化剂的活性影响很大,但对反应选择性影响较小。用甲醛、甲酸和硼氢化钾还原制成的催化剂的活性皆较高;以氢气还原制得的催化剂活性较差;采用“催化”氢气还原法,可大大提高Pt/AC催化剂的活性,与传统甲醛还原法相比,甲酸和“催化”氢气还原制备Pt/AC催化剂的方法较简便、有效。     

微波辅助Ni-B/SiO2非晶态催化剂的制备及其在硝基苯加氢中催化性能的研究

采用微波辐射干燥浸渍法获得的Ni2 /SiO2,再由液相KBH4还原制备Ni-B/SiO2非晶态催化剂,在液相硝基苯加氢反应中,该催化剂对苯胺的选择性为100%,催化活性显著高于由传统加热法制备的Ni-B/SiO2.根据XRD、XPS、SEM和氢吸附等表征,两种催化剂具有相似的活性中心本质,催化性能的不同主要归因于分散度的区别.与传统加热法相比,微波加热具有受热均匀以及增强Ni2 与载体SiO2相互结合力的特点,导致Ni-B/SiO2(MW)分散度增加,并能减少催化反应过程中活性相的脱落流失,延长催化剂使用寿命.     

担载铂催化剂用于硝基苯催化加氢制对氨基苯酚的研究

研究了以活性炭、γＡ１２Ｏ３、γ－Ａ１２Ｏ３－ＴiＯ２为载体,用浸渍法制备的铂含 量为１％的担载铂催化剂,用于硝基苯催化加氢制对氨基苯酚。发现Ｐｔ／γ－Ａ１２Ｏ３－ＴiＯ２催化剂有较高的活性、选择性和较长的寿命,催化剂循环使用１０次后,对氨基酚的率仍高于８０％,优于常用的Ｐt／Ｃ催化剂 。测定了催剂的比表面积、孔结构以 及活性金属铂的分散度,发现孔结构与催化剂性能之间没有规律性的关系;而铂在γ－Ａ１２     

Novel Stereoselective Phase Transfer Catalytic Synthesis and Some Applications of ( E )-2-Chlorovinylthioarenes and Hetarenes

A novel two-step method for the preparation of ( E )-2-chlorovinylthioarenes (or hetarenes) from thiols and 1,1,2-trichloroethane in the phase transfer catalytic systems solid K 2 CO 3 /solid KI/18-crown-6/xylene and solid KOH/18-crown-6/toluene has been developed. ( E )-2-chlorovinylthioarenes were isolated in yields up to 98%. Utilization of ( E )-2-chlorovinylthioarenes in the Heck and Stille reactions has been shown.     

双核钛氢络合物在二苯乙炔加氢反应中的催化作用

我们曾研究了Cp_2~′TiCl_2-Pr~iMgBr体系存在下,二苯乙炔的催化加氢反应,为了探讨催化剂结构对反应的影响,本文考察了几种双核钛络合物的催化活性,发现它们能对炔烃的加氢起催化作用,随络合物分子中2个钛原子的靠近,其加氢催化活性明显减小。     

树枝状钯纳米结构的控制合成及硝基苯加氢反应的催化活性

以氯钯酸为前驱体, 苯甲醇为还原剂和溶剂, 十六烷基吡咯烷酮(PVP)为稳定剂, 在微波辐射下制备了分散均匀、形貌均一的树枝状钯纳米结构. 产物用透射电子显微镜(TEM), X射线粉末衍射(XRD), X射线光电子能谱(XPS)进行了表征, 表明所制备的Pd纳米颗粒呈树枝状, 形貌单一, 分散均匀, 是由许多近似圆形的小颗粒自组装而成的二级结构. 对树枝状钯催化硝基苯加氢反应进行探究, 表明树枝状钯的催化活性比市售的钯碳催化剂的催化活性高.     

Methods of Asymmetric Synthesis—Enantioselective Catalytic Hydrogenation

It is proposed that asymmetric syntheses be divided into enantioselective and diastereoselective syntheses. The enantioselective hydrogenations discussed in the present progress report were catalyzed by Raney nickel that had previously been treated with solutions of optically active compounds. Relationships exist between the enantioselectivity of the catalyst and the structure of the chiral compound used to modify it.     

羊毛—过渡金属络合物的合成及其选择性催化氢化性能的研究

合成和初步表征了以天然高分子羊毛为载体的羊毛一钯单金属和羊毛－钯－铁双金属络合物催化剂；研究表明，在羊毛－钯络合物催化剂中，引入第二金属能极大地改进它的催化性能，提高其催化选择性，更有效的接近酶催化剂的特征．在常温常压下，以羊毛－钯－铁双金属络合物作催化剂，能顺利地使氯代硝基苯和氯代苯甲醛选择氢化成氯代苯胶和氯代苯甲醇．产率均为１００％，有效地抑制了氰取代基的氢解脱除，络合物催化剂中的钯／铁原子比极大地影响着该类氢化反应选择性，在氯代硝基苯和氯代苯甲醛的氢化反应中，最佳的钯／铁原子比分别为１：３和１５：１，这时反应的选择性均达到１００％，溶剂和温度对氢化反应速度均有一定的影响．     

金属有机骨架材料负载镍纳米颗粒催化硝基苯加氢

以MIL-53(Al)、MIL-96(Al)和MIL-120(Al) (MIL: Material Institute of Lavorisier)三种金属有机骨架材料为载体, 采用浸渍法制备了负载廉价金属镍纳米颗粒的催化剂. 将其用于催化硝基苯加氢合成苯胺反应, 发现以MIL-53(Al)为载体制得的催化剂表现出优异的催化性能. 采用不同的镍前驱体, 如硝酸镍、醋酸镍、乙二胺合镍, 制备了一系列Ni/MIL-53(Al)催化剂. 通过X射线衍射、傅里叶变换红外光谱、电感耦合等离子体、N₂物理吸附、H₂程序升温还原、透射电镜等技术对其进行了表征, 研究了镍前驱体对金属-载体相互作用、镍颗粒尺寸以及分散程度的影响.结果表明:以乙二胺合镍为镍前驱体制得的催化剂具有金属-载体相互作用适中、镍纳米颗粒更小(4-5 nm)和分布更均匀的特点, 在硝基苯加氢反应中表现出优异的催化性能, 硝基苯转化率达到100%.回收重复使用5次后, 此催化剂仍保持催化活性,硝基苯转化率达92%.     

Mechanistic Studies on the Bismuth-Catalyzed Transfer Hydrogenation of Azoarenes

Organobismuth-catalyzed transfer hydrogenation has recently been disclosed as an example of low-valent Bi redox catalysis. However, its mechanistic details have remained speculative. Herein, we report experimental and computational studies that provide mechanistic insights into a Bi-catalyzed transfer hydrogenation of azoarenes using p-trifluoromethylphenol ( 4 ) and pinacolborane ( 5 ) as hydrogen sources. A kinetic analysis elucidated the rate orders in all components in the catalytic reaction and determined that 1 a (2,6-bis[N-(tert-butyl)iminomethyl]phenylbismuth) is the resting state. In the transfer hydrogenation of azobenzene using 1 a and 4 , an equilibrium between 1 a and 1 a ⋅ [OAr]₂ (Ar=p-CF₃−C₆H₄) is observed, and its thermodynamic parameters are established through variable-temperature NMR studies. Additionally, pK_a-gated reactivity is observed, validating the proton-coupled nature of the transformation. The ensuing 1 a ⋅ [OAr]₂ is crystallographically characterized, and shown to be rapidly reduced to 1 a in the presence of 5 . DFT calculations indicate a rate-limiting transition state in which the initial N−H bond is formed via concerted proton transfer upon nucleophilic addition of 1 a to a hydrogen-bonded adduct of azobenzene and 4 . These studies guided the discovery of a second-generation Bi catalyst, the rate-limiting transition state of which is lower in energy, leading to catalytic transfer hydrogenation at lower catalyst loadings and at cryogenic temperature.     

硝基苯在离子液体EMimBF4中的选择性电还原

采用循环伏安法和恒电位电解法研究了离子液体EMimBF4中硝基苯在微铂电极上的选择性电还原特性. 研究结果表明, 硝基苯在铂电极上的电还原反应为双分子八电子三步骤电化学过程: 第一步反应为准可逆单电子转移步骤, 产生阴离子自由基; 第二步为二电子转移步骤, 并伴有随后的双分子不可逆自由基偶合反应和快速质子化及脱水反应, 主要产物为氧化偶氮苯; 第三步是二电子转移产生偶氮苯的过程. 通过控制电位, 可以选择性地合成氧化偶氮苯和偶氮苯; 在EMimBF4中, 硝基苯和水的浓度变化对电化学行为产生较大影响.     

Predicting Small Molecule Activation including Catalytic Hydrogenation of Dinitrogen Promoted by a Dual Lewis Acid

For decades, N₂ activation and functionalization have required the use of transition metal complexes. Thus, it is one of the most challenging projects to activate the abundant dinitrogen through metal-free systems under mild conditions. Here, we demonstrate a proof-of-concept study on the catalytic hydrogenation of dinitrogen (with activation energy as low as 15.3 kcal mol⁻¹) initiated by a dual Lewis acid (DLA) via density functional theory (DFT) calculations. In addition, such a DLA could be also used to activate a series of small molecules including carbon dioxide, formaldehyde, N-ethylenemethylamine, and acetonitrile. It is found that aromaticity plays an important role in stabilizing intermediates and products. Our findings provide an alternative approach to N₂ activation and functionalization, highlighting a great potential of DLA for small molecule activation.     

钼矿石物相分析及催化极谱法测定钼

为测定钼矿中钼的总量,将矿样与盐酸加热后加硝酸-硫酸(8+2)混合酸蒸发冒烟至干。用150 g.L-1氢氧化钠溶液溶解残渣取代了常用的碱融熔法,在所得上清液中测定总钼量。为溶解钼矿中不同相态,另取一份矿样先用氨水处理以溶解钼华矿(MoO3),在每次分相溶解中所得的残渣先后用40 g.L-1酒石酸溶液和150 g.L-1碳酸钠溶液处理依次溶解出钼钨钙矿[Ca(W,Mo)O4]和钼酸铅矿(PbMnO4),在溶解分去钼酸铅矿后的残渣中存在有辉钼矿(MoS2)。将其在580℃灼烧后按测定总钼的溶解方法处理,在所得溶液中测定辉钼矿的钼量。采用催化极谱法测定上述各溶液中的钼量,所用底液为含有氯酸钾、二苯羟乙酸、二苯胍及硫酸的混合液。按所提方法分析了3个钼矿标准样品,所测得每一试样中各物相中钼量之和与该样品的总钼量测定值一致,其相对标准偏差(n=5)均小于3.5%。     

Tuning the CO2 Hydrogenation Selectivity of Rhodium Single-Atom Catalysts on Zirconium Dioxide with Alkali Ions

Tuning the coordination environments of metal single atoms (M₁) in single-atom catalysts has shown large impacts on catalytic activity and stability but often barely on selectivity in thermocatalysis. Here, we report that simultaneously regulating both Rh₁ atoms and ZrO₂ support with alkali ions (e.g., Na) enables efficient switching of the reaction products from nearly 100 % CH₄ to above 99 % CO in CO₂ hydrogenation in a wide temperature range (240–440 °C) along with a record high activity of 9.4 mol_CO g_Rh⁻¹ h⁻¹ at 300 °C and long-term stability. In situ spectroscopic characterization and theoretical calculations unveil that alkali ions on ZrO₂ change the surface intermediate from formate to carboxy species during CO₂ activation, thus leading to exclusive CO formation. Meanwhile, alkali ions also reinforce the electronic Rh₁-support interactions, endowing the Rh₁ atoms more electron deficient, which improves the stability against sintering and inhibits deep hydrogenation of CO to CH₄.     

液—液相转移催化反应合成N—取代吩噻嗪

本文叙述以四正丁基溴化铵为相转移催化剂,液一液相转移催化合成了六个 N-取代吩噻嗪化合物。由于在方法上作了改进,所以产率均优于文献报导。     

含氮聚合物负载钯络合物的合成及其催化加氢性能的研究

合成了一系列含氮聚合物金属络合物,考察了它们对1,5,9-环十二碳三烯选择性催化加氢的活性及选择性。研究了同种聚合物中单原子配体与双原子配体对催化剂活性的影响。对不同金属物种、孔结构、温度及压力对加氢活性及选择性的影响也进行了系统的比较。     

Hydrogenation of single and multiple N-N or N-O bonds by Ru(II) catalysts in homogeneous phase

The ruthenium(II) complexes RuH₂(CO)₂(PⁿBu₃)₂, RuH₂(CO)₂(PPh₃)₂, and RuH₂(PPh₃)₄ are catalytically active in the hydrogenation of organic substrates containing a NN, N(O)N or NO₂ group. The reduction of the first two groups leads to hydrazine as intermediate and amine as the final product, while reducing a NO₂ group the corresponding amine is selectively formed. A complete conversion was reached, depending on temperature, catalyst and substrate concentration. The catalysts are also active in the hydrogenolysis of an N-N group giving the corresponding amine with a 97.3% conversion using RuH₂(PPh₃)₄ as catalyst. A first-order reaction rate with respect to substrate, catalyst or hydrogen pressure was detected in all cases. Finally, the activation parameters and the kinetic constants of these reactions were calculated. In the hydrogenation of azobenzene, the rate determining step involves an associative or a dissociative step depending on the catalyst employed while in the hydrogenation of all other substrates an associative rate determining step is always involved. A catalytic cycle is suggested for the hydrogenation of azobenzene, taking into account the intermediate complexes identified in the reaction medium.     

Selectivity in the Catalytic Hydrogenation of 2-Hydroxycyclohexanone

The catalytic hydrogenation of 2–hydroxycyclohexanone has been investigated on ruthenium, nickel, rhodium, platinum and palladium. The reaction was completed usually within several hours under an atmospheric pressure of hydrogen at room temperature. It was found that ruthenium and nickel catalysts produce more cis–cyclohexane–1, 2–diol than trans-diol; while platinum and palladium catalysts give rise to more trans–diol than cis– form. Two adsorbed models, weak and strong, for the substrate were presented to account for the observed hydrogenation selectivity.