Diencarbonsäuren aus 1,3-dienen und CO2 durch C-C-verknüpfung an nickel(0)

(Lig)Ni⁰ systems react with 1,3-dienes in the presence of CO₂ to give nickela carboxylates. The influence of ligands and temperature on the regioselectivity of the CC bond formation is elucidated. In some cases the nickela carboxylates undergo reductive elimination under the influence of maleic anhydride, and the coupled diene/CO₂ moiety rearranges to give the diene carboxylic acid. A possible reaction sequence is discussed.     

Site-selective and regioselective Diels–Alder reaction of allenyl aryl ethers

Abstract  

The site-selectivity and regioselectivity of Diels–Alder reactions of allenyl aryl ethers with cyclopentadiene and acrolein were studied. While cyclopentadiene (as an electron-rich diene) only reacted with the external double bond of allenyl aryl ethers to provide the site-selective normal electron demand Diels–Alder cycloadducts, acrolein (as an electron-deficient diene) reacted with the C₁–C₂ π bond of allenyl aryl ethers to provide the site- and regioselective hetero-Diels–Alder cycloadducts as exclusive products.     

Chemo‐ and stereoselective polymerization of 3‐methylenehepta‐1,6‐Diene and Its thiol‐ene modification

Here we report on the coordination polymerization of a vinyl‐functionalized butadiene monomer, 3‐methylenehepta‐1,6‐diene (MHD) with exclusive conjugated diene chemoselectivity, high 1,2‐regioselectivity and moderate isotacticity (1,2‐selectivity > 99%, mm triad = 93%). Random copolymers of MHD and other conjugated diene (isoprene or myrcene) are also synthesized. The pendent vinyl groups of MHD homo or copolymers could be quantitatively converted into various functional groups via thiol‐ene click reaction. The resulting functionalized polybutadiene‐based material display versatile thermal and surface properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1031–1039     

Cycloaddition de derives organiques insatures du silicium,du germanium et de l'etain

The effect of atom M and of its substituents Σ upon dienophilic activity of Σ₃MCHCH₂ and Σ₃MCCH (MC, Si, Ge, Sn) is interpreted in terms of a perturbation scheme involving the lowest unoccupied orbital of the dienophile and the highest occupied orbital of the diene. This scheme also explains the stereochemistry of Diels-Alder reactions and the regioselectivity of the ene reaction with organometallic compounds.     

Asymmetric hydroesterification of styrene using catalysts with planar-chiral ferrocene oxazoline ligands

Chiral P,N-ferrocene ligands, 1-diphenylphosphino-1′-[(S)-4-isopropyl-2.5-oxazolinyl]-2′-(S_p)-(trimethylsilyl)-ferrocene and its diastereomer, and 1-diphenylphosphino-1′-[(S)-4-isopropyl-2.5-oxazolinyl]-2′(S_p)-(diphenylphosphino)-ferrocene and its diastereomer were used in the palladium-catalyzed asymmetric hydroesterification of styrene. The role of these ligands, which contain central, axial, and planar chirality, on the stereochemical outcome was investigated. A significant effect of using CuCl₂ as a co-catalyst on the reaction was observed. Excellent regioselectivity (b/n >99:1) with low ee (28%) was obtained in the presence of CuCl₂; moderate enantioselectivity (64% ee) but low regioselectivity (b/n, 40/60) was obtained in the absence of CuCl₂.     

Selective Cycloaddition of Tetracyanoethene (TCNE) and 7,7,8,8‐Tetracyano‐p‐quinodimethane (TCNQ) to Afford meso‐Substituted Phenylethynyl Porphyrins

π‐Extended TCBD‐porphyrins that contained a 1,1,4,4‐tetracyanobuta‐1,3‐diene unit were prepared by a highly efficient [2+2] cycloaddition of tetracyanoethene (TCNE) or 7,7,8,8‐tetracyano‐p‐quinodimethane (TCNQ) with meso‐substituted trans‐A₂B₂‐porphyrins that contained two phenylethynyl groups, followed by a retro‐electrocyclization reaction. Depending on the electronic properties of the arylethynyl groups, the cycloaddition reaction took place exclusively on either one or two ethynyl moieties with high yield. The addition of TCNQ proceeded with complete regioselectivity. The resulting π‐expanded TCBD‐porphyrins had a hypsochromically shifted Soret band and showed unique, broad absorption in the visible region.     

Cobalt-catalysed asymmetric hydrovinylation of 1,3-dienes

In the presence of bidentate 1,n-bis-diphenylphosphinoalkane-CoCl₂ complexes {Cl₂Co[P ∼ P]} and Me₃Al or methylaluminoxane, acyclic (E)-1,3-dienes react with ethylene (1 atmosphere) to give excellent yields of hydrovinylation products. The regioselectivity (1,4- or 1,2-addition) and the alkene configuration (E- or Z-) of the resulting product depend on the nature of the ligand and temperature at which the reaction is carried out. Cobalt(ii)-complexes of 1,1-diphenylphosphinomethane and similar ligands with narrow bite angles give mostly 1,2-addition, retaining the E-geometry of the original diene. Complexes of most other ligands at low temperature (–40 °C) give almost exclusively a single branched product, (Z)-3-alkylhexa-1,4-diene, which arises from a 1,4-hydrovinylation reaction. A minor product is the linear adduct, a 6-alkyl-hexa-1,4-diene, also arising from a 1,4-addition of ethylene. As the temperature is increased, a higher proportion of the major branched-1,4-adduct appears as the (E)-isomer. The unexpectedly high selectivity seen in the Co-catalysed reaction as compared to the corresponding Ni-catalysed reaction can be rationalized by invoking the intermediacy of an η⁴-[(diene)[P ∼ P]CoH]⁺-complex and its subsequent reactions. The enhanced reactivity of terminal E-1,3-dienes over the corresponding Z-dienes can also be explained on the basis of the ease of formation of this η⁴-complex in the former case. The lack of reactivity of the X₂Co(dppb) (X = Cl, Br) complexes in the presence of Zn/ZnI₂ makes the Me₃Al-mediated reaction different from the previously reported hydroalkenylation of dienes. Electron-rich phospholanes, bis-oxazolines and N-heterocyclic carbenes appear to be poor ligands for the Co(ii)-catalysed hydrovinylation of 1,3-dienes. An extensive survey of chiral ligands reveals that complexes of DIOP, BDPP and Josiphos ligands are quite effective for these reactions even at –45 °C and enantioselectivities in the range of 90–99% ee can be realized for a variety of 1,3-dienes. Cobalt(ii)-complex of an electron-deficient Josiphos ligand is especially active, requiring only <1 mol% catalyst to effect the reactions.     

The di-π-methane rearrangement of systems with simple vinyl moieties : Mechanistic and exploratory organic photochemistry

3,3-Dimethyl-1,1-diphenyl-1,4-pentadiene and two 5-substituted derivatives were synthesized and studied. The regioselectivity, stereochemistry, quantum efficiency, multiplicity, and excited state reaction rates were studied in each case. The parent hydrocarbon, 5-MeO-derivative, and 5-cyano-diene—all rearranged on direct irradiation to give vinylcyclopropanes. The first compound led to 3,3-dimethyl-2,2-diphenyl-1-vinylcyclopropane. The second afforded 3,3-dimethyl-2,2-diphenyl-1-(2'-methoxyvinyl)cyclopropane. The last gave 1-cyano-3,3-dimethyl-2-(2',2'-diphenylvinyl)cyclopropane. Thus, the vinyl and methoxyvinyl groups survive in the products intact, while the cyanovinyl group is incorporated in the three-ring. In the two substituted dienes, cis-reactant gave cis-product and trans-reactant gave trans-product, both where the substituent was on the vinyl group of the product and where it became a ring substituent. The substituted di-π-methane systems underwent only cis-trans isomerization on sensitization, while the parent, unsubstituted diene led to di-π-methane product on sensitized as well as direct photolysis. While the quantum yields for the hydrocarbon diene were the same at room temperature for the direct and sensitized runs, only the sensitized runs showed a temperature dependence of efficiency with a dramatic, 5-fold increase on a 46° temperature increase. Thus, evidence was obtained for a singlet rearrangement in all cases and a triplet process only in the case of the unsubstituted diene. A sizable activation energy was seen for the triplet but not for the singlet. The room temperature quantum yields in the direct irradiations were: φ(parent diene)=0.011, φ(trans-methoxydiene)=0.051, φ(cis-methoxy-diene)= 0.050, φ(trans-cyanodiene)=0.36, and φ(cis-cyano-diene) = 0.20. A competing side reaction was cis-trans isomerization but these quantum yields were lower. Single photon counting was employed to obtain excited singlet reaction and decay rates at low temperature (i.e. 77°K) and the method of magic multipliers was used to obtain room temperature rates. These were: k_r(parent diene) = 4.7 × 10⁸ sec^?1, k_r(trans-cyano-diene)= 1.5 ×10¹⁰ sec^?1, k_r(cis-cyano-diene)= 8.0 × 10⁹sec^?1, and k_r(trans-methoxy-diene) = 1.9 × 10⁹ sec^?1. The results are discussed in terms of excited state molecular structure.An SCF-CI molecular orbital treatment of the reaction was developed. This used a cyclopropyldicarbinyl diradical species, with Walsh cyclopropane basis orbitals, as representing the half-reacted species. The energy of formation of this species from vertical excited state reactant was calculated for all three dienes and an excellent correlation with observed excited singlet rates was obtained. Similarly, dissection of the excited diradical energy into bond components led to a correlation between regioselectivity and weakness of the three-ring bond broken in the regioselectivity-determining step. Evidence was adduced for localization of the excitation energy in S₁ of reactant in the diphenylvinyl chromophore with migration of electronic excitation into the cyclopropyldicarbinyl diradical moiety during the vinyl-vinyl bridging process. A general method for quantitatively partitioning excitation energy was developed and applied to the case in hand. Finally, there was predicted a greater probability of di-π-methane three-ring fission in the excited state compared to the diradical ground state where Grob fragmentation proved energetically more favorable.     

Regio‐ and Stereochemical Studies on the Nitroso‐Diels–Alder Reaction with 1,2‐Disubstituted Dienes

The regioselectivity of the nitroso‐Diels–Alder reaction between unsymmetrical acyclic dienes and Boc‐nitroso (Boc=tert‐butoxycarbonyl) reagent or the Wightman chiral chloronitroso reagents has been studied. With the Boc‐nitroso reagent, the selectivity is a consequence of steric effects at the C1‐position in the diene and electronic effects at the C2‐position in the diene. The combination of an unprotected hydroxyethyl side chain at C1 and an electron‐withdrawing group at C2 allows complete regioselectivity in favour of the proximal isomer. The same isomer was obtained exclusively with the chiral nitroso reagent with high enantioselectivities. A model based on steric effects is proposed.     

Comparative Analysis of Ethylene/Diene Copolymerization and Ethylene/Propylene/Diene Terpolymerization Using Ansa-Zirconocene Catalyst with Alkylaluminum/Borate Activator: The Effect of Conjugated and Nonconjugated Dienes on Catalytic Behavior and Polymer Microstructure

The copolymerization of ethylene‒diene conjugates (butadiene (BD), isoprene (IP) and nonconjugates (5-ethylidene-2-norbornene (ENB), vinyl norbornene VNB, 4-vinylcyclohexene (VCH) and 1, 4-hexadiene (HD)), and terpolymerization of ethylene-propylene-diene conjugates (BD, IP) and nonconjugates (ENB, VNB, VCH and HD) using two traditional catalysts of C₂-symmetric metallocene—silylene-bridged rac-Me₂Si(2-Me-4-Ph-Ind)₂ZrCl₂ (complex A) and ethylene-bridged rac-Et(Ind)₂ZrCl₂ (complex B)—with a [Ph₃C][B(C₆F₅)₄] borate/TIBA co-catalyst, were intensively studied. Compared to that in the copolymerization of ethylene diene, the catalytic activity was more significant in E/P/diene terpolymerization. We obtained a maximum yield of both metallocene catalysts with conjugated diene between 3.00 × 10⁶ g/mol_Mt·h and 5.00 × 10⁶ g/mol_Mt·h. ENB had the highest deactivation impact on complex A, and HD had the most substantial deactivation effect on complex B. A ¹H NMR study suggests that dienes were incorporated into the co/ter polymers’ backbone through regioselectivity. ENB and VNB, inserted by the edo double bond, left the ethylidene double bond intact, so VCH had an exo double bond. Complex A’s methyl and phenyl groups rendered it structurally stable and exhibited a dihedral angle greater than that of complex B, resulting in 1, 2 isoprene insertion higher than 1, 4 isoprene that is usually incapable of polymerization coordination. High efficiency in terms of co- and ter- monomer incorporation with higher molecular weight was found for complex 1. The rate of incorporation of ethylene and propylene in the terpolymer backbone structure may also be altered by the conjugated and nonconjugated dienes. ¹³C-NMR, ¹H-NMR, and GPC techniques were used to characterize the polymers obtained.     

Mechanism of Copper(I)‐Catalyzed Allylic Alkylation of Phosphorothioate Esters: Influence of the Leaving Group on α Regioselectivity

The mechanism of Cu^I‐catalyzed allylic alkylation and the influence of the leaving groups (OPiv, SPiv, Cl, SPO(OiPr)₂; Piv: pivavloyl) on the regioselectivity of the reaction have been explored by using density functional theory (DFT). A comprehensive comparison of many possible reaction pathways shows that [(iPr)₂Cu]^? prefers to bind first oxidatively to the double bond of the allylic substrate at the anti position with respect to the leaving group, and this is followed by dissociation of the leaving group. If the leaving group is not taken into account, the reaction then undergoes an isomerization and a reductive elimination process to give the α‐ or γ‐selective product. If OPiv, SPiv, Cl, or SPO(OiPr)₂ groups are present, the optimal route for the formation of both α‐ and γ‐substituted products changes from the stepwise elimination to the direct process, in which the leaving group plays a stabilizing role for the reactant and destabilizes the transition state. The differences to the energy barrier for the α‐ and γ‐substituted products are 2.75 kcal mol^?1 with SPO(OiPr)₂, 2.44 kcal mol^?1 with SPiv, 2.33 kcal mol^?1 with OPiv, and 1.98 kcal mol^?1 with Cl, respectively; these values show that α regioselectivity in the allylic alkylation follows a SPO(OiPr)₂>SPiv>OPiv>Cl trend, which is in satisfactory agreement with the experimental findings. This trend mainly originates in the differences between the attractive electrostatic forces and the repelling steric interactions of the SPO(OiPr)₂, SPiv, OPiv, and Cl groups on the Cu group.     

Regio‐ and Stereoselective Allylic Substitutions of Chiral Secondary Alkylcopper Reagents: Total Synthesis of (+)‐Lasiol, (+)‐13‐Norfaranal,and (+)‐Faranal

Chiral secondary alkylcopper reagents were prepared from chiral secondary alkyl iodides by a retentive I/Li exchange followed by a retentive transmetalation with CuBr?P(OEt)₃. Switching the solvent to THF significantly increased their configurational stability and made these copper reagents suitable for regioselective allylic substitutions. The optically enriched copper species underwent S_N2 substitutions with allylic bromides (up to >99 % S_N2 regioselectivity). The addition of ZnCl₂ and the use of chiral allylic phosphates allowed to switch the regioselectivity towards S_N2′ substitution (up to >99 % S_N2′ regioselectivity) and to perform highly selective anti‐S_N2′ substitutions with absolute control over two adjacent stereocenters. This method was applied in the total synthesis of the three ant pheromones (+)‐lasiol, (+)‐13‐norfaranal, and (+)‐faranal (up to 98:2 dr, 99 % ee).     

Ligand-Dictated Regiodivergent Allylic Functionalizations via Palladium-Catalyzed Remote Substitution

Different from classical allylic substitutions that require a vicinal leaving group, an olefin bearing a remote leaving group is scarcely viewed as a potential allylation substrate. Herein, we describe feasible protocols to achieve regiodivergent allylic C−H functionalizations via palladium-catalyzed remote substitution, which provides a novel strategy for the seldomly studied migratory Tsuji–Trost reaction. Dictated by a suitable ligand, a process that involved 4,3-hydrofunctionalization of the generated conjugated diene intermediate via metal walking is observed in generally >20 : 1 regioselectivity. Unexpectedly, a related 1,4-hydrofunctionalization pathway is found to be a major route with a newly synthesized electron-rich bisphosphine ligand, which challenges the conventional viewpoint on the potential regioselectivity of hydrofunctionalizations of linear internal conjugated dienes via η³-substitution. A series of deuterium experiments and kinetic studies provide a preliminary insight into the potential catalytic cycle.     

Borane-Catalyzed Tandem Cyclization/Hydrosilylation Towards Enantio- and Diastereoselective Construction of trans-2,3-Disubstituted-1,2,3,4-Tetrahydroquinoxalines

Recent years have witnessed marked progress in the efficient synthesis of various enantioenriched 1,2,3,4-tetrahydroquinoxalines. However, enantio- and diastereoselective access to trans-2,3-disubstituted 1,2,3,4-tetrahydroquinoxalines remains much less explored. Herein we report that a frustrated Lewis pair-based catalyst generated via in situ hydroboration of 2-vinylnaphthalene with HB(C₆F₅)₂ allows for the one-pot tandem cyclization/hydrosilylation of 1,2-diaminobenzenes and 1,2-diketones with commercially available PhSiH₃ to exclusively afford trans-2,3-disubstituted 1,2,3,4-tetrahydroquinoxalines in high yields with excellent diastereoselectivities (>20 : 1 dr). Furthermore, this reaction can be rendered asymmetric by using an enantioenriched borane-based catalyst derived from HB(C₆F₅)₂ and a binaphthyl-based chiral diene to give rise to enantioenriched trans-2,3-disubstituted 1,2,3,4-tetrahydroquinoxalines in high yields with almost complete diastereo- and enantiocontrol (>20 : 1 dr, up to >99 % ee). A wide substrate scope, good tolerance of diverse functionality and up to 20-gram scale production are demonstrated. The enantio- and diastereocontrol are achieved by the judicious choice of borane catalyst and hydrosilane. The catalytic pathway and the origin of the excellent stereoselectivity are elucidated by mechanistic experiments and DFT calculations.     

Factors affecting the competitive reduction of 8,8-dimethylnaphthalene-1,4,5(8H)-trione in a Diels–Alder cycloaddition with hydroxysulfinyldienes

Competing reduction and cycloaddition products were formed in the reaction of 8,8-dimethylnaphthalene-1,4,5(8H)-trione with a hydroxysulfinyldiene. The ratio of reduction to cycloaddition products depended on the stereochemistry of the diene and on the solvent employed, being higher in ethanol than in benzene. The ratio was also affected by the addition of Lewis acids, decreasing in the order BF₃ = Al₂O₃ > MgCl₂ > ZnCl₂. The results help to explain and predict the occurrence of these competing processes in Diels–Alder cycloadditions involving quinonedienophiles.     

Control of regio-, diastereo-, and enantioselectivity in the [Ti(OTs)2(TADDOLato)]-catalyzed 1,3-dipolar cycloaddition reaction between 3-acryloyloxazolidin-2-one and nitrones

Catalytic control of regio-, diastereo-, and enantioselectivity in the 1,3-dipolar cycloaddition of 3-acryl-oyloxazolidin-2-one ( 4 ) with different nitrones 2 by the application of a [TiX₂(TADDOLato)] complex as the catalyst was developed (TADDOL = α,α,α′,α′-tetraaryl-1,3-dioxolane-4,5-dimethanol). In the absence of a catalyst, the 1,3-dipolar cycloaddition of 4 with 2 proceeded to give a mixture of regioisomers, whereas, in the presence of a catalyst, the regioselectivity of the reaction could be controlled. Three asymmetric [TiX₂(TADDOLato)] catalysts were tested, and it was found that use of the [Ti(OTs)₂(TADDOLato)] complex gave complete regioselectivity, high ‘endo’-selectivities (> 90% d.e.), and enantioselectivities corresponding to 48–70% e.e.     

Diastereo- and regioselectivity in Diels-Alder reaction of [1,4,2]diazaphospholo[4,5-a]pyridines

[1,4,2]Diazaphospholo[4,5-a]pyridines undergo diastereoselective Diels-Alder reaction at the >CP- functionality with 2,3-dimethylbutadiene and isoprene in the presence of sulfur or selenium. The reaction with isoprene occurs regioselectively. On carrying out the reaction with diene in presence of methyl iodide, the initially formed [2+4] cycloadduct is methylated regioselectively at the σ²,λ³-nitrogen. The results of the DFT calculations of the Diels-Alder reaction with isoprene are in accord with the observed regioselectivity. The relative stabilities of the two transition structures have been explained on the basis of NBO analysis.     

Catalytic enantioselective carboncarbon bond formation by addition of dialkylzinc reagents to cyclic 1,3-diene monoepoxides

Chiral copper complexes of 2,2′-binaphthyl-based phosphorus amidites are shown to be highly effective catalysts for the conjugate addition of dialkylzinc reagents to vinyloxiranes. The corresponding allylic alcohol reaction products (S_N2′-pathway) were obtained with moderate to high regioselectivity. Both direct- (S_N2-pathway) and conjugate-opening addition (S_N2′-pathway) seem to proceed with complete anti stereoselectivity. The enantioselectivity of these addition reactions according to a kinetic resolution protocol turned out to be high (>90% ee) with 1,3-cyclohexadiene and 1,3-cycloheptadiene monoepoxides.     

(4+3) Cycloaddition Reactions of N‐Alkyl Oxidopyridinium Ions

N ‐Methylation of methyl 5‐hydroxynicotinate followed by reaction with a diene in the presence of triethylamine afforded (4+3) cycloadducts in good to excellent yields. High regioselectivity was observed with 1‐substituted and 1,2‐disubstituted butadienes. Density functional theory calculations indicate that the cycloaddition involves concerted addition of the diene onto the oxidopyridinium ion. The process provides rapid access to bicyclic nitrogenous structures resembling natural alkaloids.