Elektrochemische Decarboxylierung von L.-Threonin- und Oligopeptid-Derivaten unter Bildung von N-Acyl-N,O-acetalen: Herstellung von Oligopeptiden mit Carboxamid-oder Phosphonat-C-Terminus

Electrochemical Decarboxylation of L -Threonine and Oligopeptide Derivatives with Formation of N-Acyl-N, O-acetals: Preparation of Oligopeptides with Amide or Phophonate C-Terminus Derivatives of α-amino acids with two stereogenic centers (cf. L -threonine) and of di-, tri-, and tetrapeptides are electrolyzed in MeOH or AcOH, with formation of N-acyl-N, O-acetals ( 1b – 15b , 20b ), in an anodic oxidative substitution of the COOH by an OR group. The amine ends of the oligopeptides may be benzyloxycarbonyl(Z)- or (tert-butoxy)carbonyl(Boc)-protected. With unprotected dipeptides, an electrolytic decarboxylative cyclization to imidazolidinones ( 18c , 19c ) may also occur (in H₂O/NH₄OAc). The electrolyses are carried out in simple flasks with cooling jackets (‘undivided cell’), using constant current conditions and anodes of Pt or glassy C. The electrolyte is generated in situ by adding 10–20 mol-% of a tertiary amine. Mild acidic hydrolysis of electrolysis products thus obtained may lead to amino-acid amides or peptide amides ( 10c, 11c, 12c, 17c ) with one amino acid less than the starting material. The N, O-acetals from L -threonine and the oligopeptides also react with organometallic nucleophiles such as Grignard compounds (→ 21 – 26 , 29 ), with formation of products in which the original COOH group has been replaced by alkyl or allyl (sometimes even with moderate stereoselectivity). By treatment of the peptide-derived (open-chain) N, O-acetals with trialkyl or triaryl phosphites/TiCl₄ the RO group is replaced by a phosphodiester group in a (non-diastereoselective) Michaelis-Arbuzov-type reaction ( 1d , 1e , 2d – 9d , 5e ). Thus, the two-step sequence of electrolysis and phosphonation converts an oligopeptide derivative to an analogue with a phosphonic-acid end group. The diastereoisomeric N-protected dimethyl and diethyl dipeptidephosphonates (also prepared from the corresponding diaryl esters by Ti(OR)₄-mediated transesterification) could be separated by preparative HPLC (SiO₂, Lichrosorb Si 60, 10 μm); the dextrorotatory isomers of 1d – 3d were assigned L , D -, the laevoratory ones L , L -configuration by hydrolysis to and identification of the known amino and aminophosphonic acids. The results described demonstrate a new simple route leading, from a given oligopeptide, to pure peptide analogues of known configuration.     

Versuche zur Synthese von Calicen aus trisubstituierten Cyclopropanen und Cyclopentenon

Attempted Synthesis of Calicene from Trisubstitued Cyclopropanes and Cyclopentenone The Li carbenoids 4 , prepared by treatment of substituted 1,1-dihalocyclopropanes with BuLi, are reacted with cyclopent-2-enone under thermodynamic and kinetic control (Scheme 1). In general, the latter procedure gives better yields of cyclopropylcyclopentenols 5a – e , but the reaction seems to be controlled mainly by the steric and electronic properties of the substituent Y. So, with 4b and 4e , the main reaction is the attack of the carbenoid at C(1) of cyclopent-2-enone, while 4a (Y = PhS) predominantly deprotonates the ketone (Scheme 4). Whereas 5d and 5e can easily be converted to the dihydrocalicenes 6d and 6e (Scheme 6), the attempted elimination of H₂O from 5a – c leads to the rearranged products 13 – 2 due to the opening of the cyclopropane ring (Scheme 5). Finally, the generation of the parent compound 2 from the silylated precursor 6d is attempted: treatment with MeO^? gives the addition products 18A/18B , while the reaction with Br₂ provides 19 by a bromination/dehydrobromination sequence (Scheme 7).     

Regioselectivity of the 1,3‐Oxathiolane Formation in the Lewis Acid‐Catalyzed Reaction of Thioketones with Asymmetrically Substituted Oxiranes

The reactions of the aromatic thioketone 4,4′‐dimethoxythiobenzophenone ( 1 ) with three monosubstituted oxiranes 3a – c in the presence of BF₃⋅Et₂O or SnCl₄ in dry CH₂Cl₂ led to the corresponding 1 : 1 adducts, i.e., 1,3‐oxathiolanes 4a – b with R at C(5) and 8c with Ph at C(4). In addition, 1,3‐dioxolanes 7a and 7c , and the unexpected 1 : 2 adducts 6a – b were obtained (Scheme 2 and Table 1). In the case of the aliphatic, nonenolizable thioketone 1,1,3,3‐tetramethylindane‐2‐thione ( 2 ) and 3a – c with BF₃⋅Et₂O as catalyst, only 1 : 1 adducts, i.e. 1,3‐oxathiolanes 10a – b with R at C(5) and 11a – c with R or Ph at C(4), were formed (Scheme 6 and Table 2). In control experiments, the 1 : 1 adducts 4a and 4b were treated with 2‐methyloxirane ( 3a ) in the presence of BF₃⋅Et₂O to yield the 1 : 2 adduct 6a and 1 : 1 : 1 adduct 9 , respectively (Scheme 5). The structures of 6a , 8c , 10a , 11a , and 11c were confirmed by X‐ray crystallography (Figs. 1 – 5). The results described in the present paper show that alkyl and aryl substituents have significant influence upon the regioselectivity in the process of the ring opening of the complexed oxirane by the nucleophilic attack of the thiocarbonyl S‐atom: the preferred nucleophilic attack occurs at C(3) of alkyl‐substituted oxiranes (O−C(3) cleavage) but at C(2) of phenyloxirane (O−C(2) cleavage).     

Protecting‐Group‐Free Total Synthesis of Isoquinoline Alkaloids by Nickel‐Catalyzed Annulation of o‐Halobenzaldimine with an Alkyne as the Key Step

An efficient short total synthesis of benzo[c]phenanthridine alkaloids including oxyavicine, oxynitidine, and oxysanguinarine is described. Thus, N‐methyl‐o‐bromobenzaldimines 1 b – d undergo regioselective cyclization with 4‐(benzo[d][1,3]dioxol‐5‐yl)but‐3‐yn‐1‐ol ( 2 b ) in the presence of [Ni(cod)₂] (cod=1,5‐cyclooctadiene). In situ oxidation of the resultant isoquinolinium salts gives isoquinolinone derivatives 5 b – d with benzo[d][1,3]dioxol‐5‐yl substitution at the C₃ atom and a (CH₂)₂OH group at the C₄ atom. Later, oxidation of the alcohol group in 5 b – d to the aldehyde moiety followed by acid‐catalyzed cyclization and dehydration completes the total syntheses to give oxyavicine, oxynitidine, and oxysanguinarine in 67, 65, and 60 % yields, respectively. The synthesis requires four steps from o‐bromobenzaldehyde derivatives. Transformations of these alkaloids to the other alkaloids in this family are also discussed herein.     

1,3-Oxathiole and Thiirane Derivatives from the Reactions of Azibenzil and α-diazo amides with thiocarbonyl compounds

The reactions of α-diazo ketones 1a,b with 9H-fluorene-9-thione ( 2f ) in THF at room temperature yielded the symmetrical 1,3-dithiolanes 7a,b , whereas 1b and 2,2,4,4-tetramethylcyclobutane-1,3-dithione ( 2d ) in THF at 60° led to a mixture of two stereoisomeric 1,3-oxathiole derivatives cis- and trans- 9a (Scheme 2). With 2-diazo-1,2-diphenylethanone ( 1c ), thio ketones 2a–d as well as 1,3-thiazole-5(4H)-thione 2g reacted to give 1,3-oxathiole derivatives exclusively (Schemes 3 and 4). As the reactions with 1c were more sluggish than those with 1a,b , they were catalyzed either by the addition of LiClO₄ or by Rh₂(OAc)₄. In the case of 2d in THF/LiClO₄ at room temperature, a mixture of the monoadduct 4d and the stereoisomeric bis-adducts cis- and trans- 9b was formed. Monoadduct 4d could be transformed to cis- and trans- 9b by treatment with 1c in the presence of Rh₂(OAc)₄ (Scheme 4). Xanthione ( 2e ) and 1c in THF at room temperature reacted only when catalyzed with Rh₂(OAc)₄, and, in contrast to the previous reactions, the benzoyl-substituted thiirane derivative 5a was the sole product (Scheme 4). Both types of reaction were observed with α-diazo amides 1d,e (Schemes 5–7). It is worth mentioning that formation of 1,3-oxathiole or thiirane is not only dependent on the type of the carbonyl compound 2 but also on the α-diazo amide. In the case of 1d and thioxocyclobutanone 2c in THF at room temperature, the primary cycloadduct 12 was the main product. Heating the mixture to 60°, 1,3-oxathiole 10d as well as the spirocyclic thiirane-carboxamide 11b were formed. Thiirane-carboxamides 11d–g were desulfurized with (Me₂N)₃P in THF at 60°, yielding the corresponding acrylamide derivatives (Scheme 7). All reactions are rationalized by a mechanism via initial formation of acyl-substituted thiocarbonyl ylides which undergo either a 1,5-dipolar electrocyclization to give 1,3-oxathiole derivatives or a 1,3-dipolar electrocyclization to yield thiiranes. Only in the case of the most reactive 9H-fluorene-9-thione ( 2f ) is the thiocarbonyl ylide trapped by a second molecule of 2f to give 1,3-dithiolane derivatives by a 1,3-dipolar cycloaddition.     

Fluoridolyse von N-Phosphorylphosphazenen

Fluoridolysis of N-Phosphoryl Phosphazenes In the reaction of the N-phosphoryl phosphazenes X₃P?N? P(Y)X₂ (X = Cl, PhO, Et₂N, CF₃CH₂O, PrS, Ph; Y = O, S) ( 1 – 18 ) with Et₃N · nHF (n ≈? 3 or 0.6) fluoro derivatives of N-phosphoryl phosphazenes (see table 2) as well as N-phosphorylated imiddotetrafluorophosphates, [F₄P?N? P(Y)Cl₂]^? (Y = O, S), and imidopentafluorophosphates, [F₅P? N? P(Y)X₂]^2? or [F₅P? NH? P(O)X₂]^? (see table 3), are formed. t-BuNHPCl₂?N? POCl₂ reacts in acetonitrile with Et₃N or i-Pr₂EtN to form a product, representing probably the diazadiphosphetine ( 5 b ).     

A Simple Procedure for the Preparation of Chiral ‘Tris(hydroxymethyl)methane’ Derivatives

The aldol adducts 1a – 13a of R,R-2(tertbutyl)-6-methyl-1,3-dioxan-4-one (from 3-hydroxybutanoic acid) to aldehydes, single diastereoisomers obtained as described previously, are acetylated or benzoylated to the corresponding esters 1b – 5b and 6c – 13c , respectively, which in turn are reduced with LiAlH₄ to the title compounds 14 – 24 . The enantiomerically pure triols thus available may be useful as chiral building blocks, as auxiliaries for enantioselective reactions, and as center pieces for chiral dendrimers.     

Macrocyclic Complexes Derived from Four cis-L2Pt Corners and Four Butadiynediyl Linkers; Syntheses,Electronic Structures,and Square versus Skew Rhombus Geometries

The dialkyl malonate derived 1,3-diphosphines R₂C(CH₂PPh₂)₂ (R= a , Me; b , Et; c , n-Bu; d , n-Dec; e , Bn; f , p-tolCH₂) are combined with (p-tol₃P)₂PtCl₂ or trans-(p-tol₃P)₂Pt((C≡C)₂H)₂ to give the chelates cis-(R₂C(CH₂PPh₂)₂)PtCl₂ ( 2 a – f , 94–69 %) or cis-(R₂C(CH₂PPh₂)₂)Pt((C≡C)₂H)₂ ( 3 a – f , 97–54 %). Complexes 3 a – d are also available from 2 a – d and excess 1,3-butadiyne in the presence of CuI (cat.) and excess HNEt₂ (87–65 %). Under similar conditions, 2 and 3 react to give the title compounds [(R₂C(CH₂PPh₂)₂)[Pt(C≡C)₂]₄ ( 4 a – f ; 89–14 % (64 % avg)), from which ammonium salts such as the co-product [H₂NEt₂]⁺ Cl⁻ are challenging to remove. Crystal structures of 4 a , b show skew rhombus as opposed to square Pt₄ geometries. The NMR and IR properties of 4 a – f are similar to those of mono- or diplatinum model compounds. However, cyclic voltammetry gives only irreversible oxidations. As compared to mono-platinum or Pt(C≡C)₂Pt species, the UV-visible spectra show much more intense and red-shifted bands. Time dependent DFT calculations define the transitions and principal orbitals involved. Electrostatic potential surface maps reveal strongly negative Pt₄C₁₆ cores that likely facilitate ammonium cation binding. Analogous electronic properties of Pt₃C₁₂ and Pt₅C₂₀ homologs and selected equilibria are explored computationally.     

Radical Cyclization Reactions via Manganese(III) Acetate Leading to 2‐Thienyl‐Substituted Dihydrofuran Compounds

The 2‐thienyl‐substituted 4,5‐dihydrofuran derivatives 3 – 8 were obtained by the radical cyclization reaction of 1,3‐dicarbonyl compounds 1a – 1f with 2‐thienyl‐substituted conjugated alkenes 2a – 2e by using [Mn(OAc)₃] (Tables 1–5). In this study, reactions of 1,3‐dicarbonyl compounds 1a – 1e with alkenes 2a – 2c gave 4,5‐dihydrofuran derivatives 3 – 5 in high yields (Tables 1–3). Also the cyclic alkenes 2d and 2e gave the dihydrobenzofuran compounds, i.e., 6 and 7 in good yields (Table 4). Interestingly, the reaction of benzoylacetone (=1‐phenylbutane‐1,3‐dione; 1f ) with some alkenes gave two products due to generation of two stable carbocation intermediates (Table 5).     

Triaziridine 7. Mitteilung. Stabile pyramidale Konfigurationen an den Stickstoff-Atomen von Dialkyl-und Trialkyl-triaziridinen

Stable Pyramidal configurations at the Nitrogen Atoms of Dialkyl-and Trialkyl-triaziridines Stereochemical features of the recently synthesized nine samples of di- and trialkyl-triaziridines, namely the 1,3-cyclopentylen-(series a ) and the two stereoisomers of the diisopropyl derivatives (series b and c ), containing as the third substituent an H-atom ( 2 ), a CH₃ group ( 3 )or a CH₂OH group ( 4 ), were elaborated on the basis of the ¹H-, ¹³C-, and ¹⁵N-NMR spectra. The three N-atoms of the saturated N₃-homocycle were found to be stable to pyramidal inversion in all cases. According to their NMR spectra, 2 – 4 of the series a and b possess twofold symmetry (C_s), while 2 – 4 of series c are asymmetric. Thus, series c has the trans-configuration at N(2)/N(3) and, consequently, the cis-configuration at N(1)/N(2), while series a and b have the cis-configuration at N(2)/N(3) and -since the all-cis-arrangement is excluded-the trans-configuration at N(1)/N(2). The asymmetry of the trans-configurated 2c turned into twofold symmetry (C₂), when a little CF₃COOH was added. The ¹H- and ¹³C-NMR data of series b and c of our alkyl-triaziridines exhibit a shielding effect, according to which there are two types of i-Pr groups, i-Pr(a) and i-Pr(b). They differ in the NMR signals of the H- and the C-atoms of their CH groups: the H-atoms of i-Pr(a) are more deshielded by 0.75–1.111 ppm and its C-atoms are more shielded by 10.0–160.0 ppm as compared to the corresponding atoms of i-Pr(b). i-Pr(a) is cis (on the N₃-homocycle) to a large substituent (such as i-Pr, Me, CH₂OH) and to a lone pair, while i-Pr(b)is cis only to a small (H) or to no substituent and to one or two lone pairs. An analogous effect appears in the NMR signals of the CH₃ and CH₂OH groups at N(1) of 3 and 4 in the series b and c .     

Synthese von Trifluoromethyl-substituierten Schwefel-Heterocyclen unter Verwendung von 3,3,3-Trifluorobrenztraubensäure-Derivaten

Synthesis of Trifluoromethyl-Substituted Sulfur Heterocycles Using 3,3,3-Trifluoropyruvic-Acid Derivatives The reaction of methyl 3,3,3-trifluoropyruvate ( 1 ) with 2,5-dihydro-1,3,4-thiadiazoles 4a, b in benzene at 45° yielded the corresponding methyl 5-(trifluoromethyl)-1,3-oxathiolane-5-carboxylates 5a, b (Scheme 1) via a regioselective 1,3-dipolar cycloaddition of an intermediate ‘thiocarbonyl ylide’ of type 3 . With methyl pyruvate, 4a reacted similarly to give 6 in good yield. Methyl 2-diazo-3,3,3-trifluoropropanoate ( 2 ) and thiobenzophenone ( 7a ) in toluene underwent a reaction at 50°; the only product detected in the reaction mixture was thiirane 8a (Scheme 2). With the less reactive thiocarbonyl compounds 9H-xanthene-9-thione ( 7b ) and 9H-thioxanthene-9-thione ( 7c ) as well as with 1,3-thiazole-5(4H)-thione 12 , diazo compound 2 reacted only in the presence of catalytic amounts of Rh₂(OAc)₄. In the cases of 7a and 7b , thiiranes 8b and 8c , respectively, were the sole products (Scheme 3). The crystal struture of 8c has been established by X-ray crystallography (Fig.). In the reaction with 12 , desulfurization of the primarily formed thiirane 14 gave the methyl 3,3,3-trifluoro-2-(4,5-dihydro-1,3-thiazol-5-ylidene)propanoates (E)-and (Z)- 15 (Scheme 4). A mechanism of the Rh-catalyzed reaction via a carbene addition to the thiocarbonyl S-atom is proposed in Scheme 5.     

Hoogsteen-Duplex DNA: Synthesis and base pairing of oligonucleotides containing 1-deaza-2′-deoxyadenosine

Oligodeoxyribonucleotides containing 1-deaza-2′-deoxyadenosine ( = 7-amino-3-(2-deoxy-β-D -erythro-pentofuranosyl)-3H-imidazo[4, 5-b]pyridine; 1b ) form Hoogsteen duplexes. Watson-Crick base pairs cannot be built up due to the absence of N(1). For these studies, oligonucleotide building blocks – the phosphonate 3a and the phosphoramidite 3b – were prepared from 1b via 4a and 5 , as well as the Fractosil-linked 6b , and used in solid-phase synthesis. The applicability of various N-protecting groups (see 4a – c ) was also studied. The Hoogsteen duplex d[(c¹A)₂₀] · d(T₂₀) ( 11 · 13 ; T_m 15°) is less stable than d(A₂₀) · d(T₂₀) ( 12 · 13 ; T_m 60°). The block oligomers d([c¹A)₁₀–;T₁₀] ( 14 ) and d[T₁₀–(c¹A)₁₀] ( 15 ) containing purine and pyrimidine bases in the same strand are also able to form duplexes with each other. The chain polarity was found to be parallel.     

Zur Photochemie von 1, 2-Benzisoxazolen in stark saurer Lösung

On the Photochemistry of 1, 2-Benzisoxazoles in Strongly Acidic Solution The 1, 2-benzisoxazoles 1a, 1b and 1d when dissolved in 96% sulfuric acid and irradiated through a quartz filter with a mercury high-presure lamp yield, after work-up, mixtures of 2, 5- and 2, 3-dihydroxy-acylbenzenes ( 2 and 3 , respectively; cf. Schemes 1 and 3 and Table 1). Irradiation of 3, 5-dimethyl-1, 2-benzisoxazole ( 1c ) in 96% sulfuric acid leads to the formation of 2, 3-dihydroxy-5-methyl-acetophenone ( 3c ) in only 6% yield (cf. Table 1). It is assumed that the 1, 2-benzisoxazolium ions react in the excited singlet state by heterolytic cleavage of the N, O-bond to yield the corresponding aryl oxenium ions 7 in the singlet ground state (see Scheme 5). Reaction of 7 with HSO ₄ ? ions, present in 96% sulfuric acid, yields, after hydrolysis, the dihydroxy compounds 2 and 3 . Photolysis of 3-methyl-1, 2-benzisoxazole ( 1b ) in diluted sulfuric acid (0,5 to 9 M ) in methanol or water leads only to the formation of 2-amino-phenol ( 6 ; see Scheme 3), presumable via photo-isomerization of 1b to 2-methylbenzoxazole ( 5b ) which then is hydrolyzed to give 6 .     

Photolyse von 3-Methyl-2, 1-benzisoxazol (3-Methylanthranil) und 2-Azido-acetophenon in Gegenwart von Schwefelsäure und Benzolderivaten

Photolysis of 3-Methyl-2, 1-benzisoxazole (3-Methylanthranil) and 2-Azido-acetophenone in the Presence of Sulfuric Acid and Benzene Derivatives Irradiation of 3-methylanthranil ( 1 ) in acetonitrile in the presence of sulfuric acid and benzene, toluene, p-xylene, mesitylene or anisole with a mercury high-pressure lamp through a pyrex filter yields beside varying amounts of 2-amino-acetophenone ( 3 ) and 2-amino-5-hydroxy- ( 4a ) and 2-amino-3-hydroxy-acetophenone ( 4b ) the corresponding diphenylamine derivatives 5 (see Table 1). In the case of toluene and anisole mixtures of the corresponding ortho- and para-substituted isomers ( 5b, 5d or 5g, 5i respectively), but no meta-substituted isomers ( 5c or 5h ) are obtained. In addition to these products, the irradiation of 1 in the presence of anisole yields also 2-amino-5-(4′-methoxyphenyl)-acetophenone ( 7 ), 2-amino-3-(4′-methoxyphenyl)-acetophenone ( 8 ) and 2-methoxy-9-methyl-acridine ( 6 ; see Scheme 1). The latter product is also formed thermally by acid catalysis from the diphenylamine derivative 5i . Irradiation of 2-azido-acetophenone ( 2 ) in acetonitrile solution in the presence of sulfuric acid and benzene leads to the formation of 1, 3, 4a, 4b, 5a and 9 (see Table 2). Compounds 3, 4a, 4b and 5a are also obtained after acid catalyzed decomposition of 2 in the presence of benzene. Thus, it is concluded that irradiation of 1 or 2 in the presence of sulfuric acid yields 2-acetyl-phenylnitrenium ions 10 in the singlet ground state which will undergo electrophilic substitution of the aromatic compounds, perhaps via the π-complex 11 (see Scheme 2).     

Photochemische Cycloadditionen von 3-Phenyl-2H-azirinen mit kumulierten Doppelbindungen. Vorläufige Mitteilung

Irradiation of 2-methyl- ( 1c ) and 2,2-dimethyl-3-phenyl-2H-azirine ( 1d ) in benzene solution in the presence of carbon dioxide yields 2-methyl-4-phenyl- ( 3c ) and 2,2-dimethyl-4-phenyl-3-oxazolin-5-one ( 3d ), respectively. Similar cycloadducts are observed (see table) when 2,3-diphenyl-2H-azirine ( 1b ) and 1d are irradiated in the presence of phenylisocyanate, o-tolylisocyanate, phenylisothiocyanate or di-o-tolyl-carbodiimide.     

1,3‐Dipolar Cycloaddition Reactions of Organic Azides with Morpholinobuta‐1,3‐dienes and with an α‐Ethynyl‐enamine

The cycloaddition of organic azides with some conjugated enamines of the 2‐amino‐1,3‐diene, 1‐amino‐1,3‐diene, and 2‐aminobut‐1‐en‐3‐yne type is investigated. The 2‐morpholinobuta‐1,3‐diene 1 undergoes regioselective [3+2] cycloaddition with several electrophilic azides RN₃ 2 ( a , R=4‐nitrophenyl; b , R=ethoxycarbonyl; c , R=tosyl; d , R=phenyl) to form 5‐alkenyl‐4,5‐dihydro‐5‐morpholino‐1H‐1,2,3‐triazoles 3 which are transformed into 1,5‐disubstituted 1H‐triazoles 4a , d or α,β‐unsaturated carboximidamide 5 (Scheme 1). The cycloaddition reaction of 4‐[(1E,3Z)‐3‐morpholino‐4‐phenylbuta‐1,3‐dienyl]morpholine ( 7 ) with azide 2a occurs at the less‐substituted enamine function and yields the 4‐(1‐morpholino‐2‐phenylethenyl)‐1H‐1,2,3‐triazole 8 (Scheme 2). The 1,3‐dipolar cycloaddition reaction of azides 2a – d with 4‐(1‐methylene‐3‐phenylprop‐2‐ynyl)morpholine ( 9 ) is accelerated at high pressure (ca. 7–10 kbar) and gives 1,5‐disubstituted dihydro‐1H‐triazoles 10a , b and 1‐phenyl‐5‐(phenylethynyl)‐1H‐1,2,3‐triazole ( 11d ) in significantly improved yields (Schemes 3 and 4). The formation of 11d is also facilitated in the presence of an equimolar quantity of tBuOH. The three‐component reaction between enamine 9 , phenyl azide, and phenol affords the 5‐(2‐phenoxy‐2‐phenylethenyl)‐1H‐1,2,3‐triazole 14d .     

Photoinduzierte 1, 3-dipolare Cycloaddition von 3-Phenyl-2H-azirinen an Azodicarbonsäure-diäthylester. 32. Mitteilung über Photoreaktionen

Irradiation of 2, 2-dimethyl-3-phenyl- ( 1a ), 2, 3-diphenyl-2H-azirine ( 1b ) or the azirine-precursors 1-azido-1-phenyl-propene ( 2a ) and 1-azido-1-phenyl-ethylene ( 2b ), respectively, in benzene in the presence of azodicarboxylic acid diethylester, yields the corresponding 1, 2-carbethoxy-3-phenyl-Δ³-1, 2, 4-triazolines 4a–d (Scheme 1). Refluxing 4 ( a, c or d ) in 0, 2–0, 4M aqueous ethanolic potassium hydroxide leads to the formation of the 1-carbethoxy-3-phenyl-Δ²-1, 2, 4-triazolines 6 ( a, c or d ). Under the same conditions 4b is converted to 3, 5-diphenyl-1, 2, 4-triazole ( 7b , Scheme 2). In 10M aqueous potassium hydroxide solution heating of either 4 ( c or d ) or 6 ( c or d ) yields the 3-phenyl-1, 2, 4-triazoles 7 ( c or d ). Photolysis of 1-carbethoxy-5, 5-dimethyl-3-phenyl-Δ²-1, 2, 4-triazoline ( 6a ) in benzene in the presence of oxygen and trifluoroacetic acid methylester gives the 5-methoxy-2, 2-dimethyl-4-phenyl-5-trifluoromethyl-3-oxazoline ( 13 , Scheme 5). 5, 5-Dimethyl-3-phenyl-1, 2, 4-triazole seems to be the intermediate, which on losing nitrogen gives the benzonitrile-isopropylide ( 3a ).     

Synthese von 4(5)-acyl-5(4)-alkylimidazolen aus symmetrischen 1,3-dicarbonylverbindungen

Synthesis of 4(5)-Acyl-5(4)-alkylimidazoles from Symmetrical 1,3-Diones A new synthesis of 4(5)-acyl-5(4)-alkylimidazoles 1 is described. The symmetrical 1,3-diones 5a and 5b were reacted with N₂O₄ to give the nitro compounds 7a and 7b , respectively; 5c was treated with NaNO₂ to give the nitroso compound 7c (Scheme 2). Hydrogenation of 7a , 7b and 7c over Pd/C in acetic acid/acetic formic anhydride yielded the formamides 9a , 9b and 9c , whose cyclization in formamide/formic acid afforded the 4(5)-acyl-5(4)-alkylimidazoles 1a, 1b and 1c , respectively. Oxazoles 11a and 11b were obtained from the corresponding formamides 9a and 9b with methanesulfonic acid/P₂O₅.     

Reactions at the B–B Bond of Tri‐tert‐butylazadiboriridine NB2R3: Ring Extensions

The OCO carboxylate unit of pivalic acid adds to the B–B bond of the azadiboriridine NB₂R₃ ( 1 a , R = tBu) to give the chiral heterocyclohexadiene 2 a ; the enantiomers of 2 a are transformed into one another by a [1,3] sigmatropic hydride transfer along the B–N–B ring fragment. The azadiboracyclopentanes 3 a – e are formed from 1 a and the alkenes ethene, propene, isobutene, (trimethylsilyl)ethene, and 2,3‐dimethyl‐1‐butene. Only one double bond of cyclopentadiene and 1,3‐butadiene reacts in the same way to give 3 f , g , respectively, and both of the double bonds of 1,3‐butadiene react with an excess of 1 a to give 3 h , which is obtained in a 9 : 1 mixture of racemate and meso‐isomer; the meso‐isomer crystallizes in the space group P2₁/n. The corresponding diazadiboracyclopentane 3 i and the triazadiboracyclopentane 3 j are formed from 1 a and N‐phenyl benzaldimine or azobenzene, respectively. Ethyne and 1 a give either the azadiboracyclopentene 4 a (1 : 1) or the diazatetraborabicyclo[3.3.0]octane 3 k (1 : 2). The phosphaalkyne P≡C–tBu and 1 a  analogously yield the heterocyclopentene 4 c . The insertion of SitBu₂ into 1 a to give the azasiladiboracyclobutane 5 a is achieved by applying Li powder and tBu₂SiCl₂. The hitherto unknown azadiboriridines BN₂R₂R′ (R = tBu; R′ = 1‐iPr, 2‐Mes, 2‐CMe₂Et: 1 b – d ) were synthesized by the chloroboration of the iminoboranes RB≡NiPr and RB≡NR with RBCl₂, MesBCl₂, and (EtMe₂C)BCl₂, respectively, and subsequent dechlorination of the isolated and characterized diborylamines Cl–BR–NiPr–BR–Cl ( 6 a ), Cl–BR–NR–BMes–Cl ( 6 b ), and Cl–BR–NR–B(CMe₂Et)–Cl ( 6 c ), respectively, with lithium (Mes = mesityl).The azadiboriridine 1 b dimerizes to give the diaza‐nido‐hexaborane 7 a , whereas 1 c and 1 d are storable at room temperature. The product 1 c crystallizes as a racemate in the space group P2₁/c; its ring geometry differs from that of the known N‐mesityl isomer.     

From Low to Very High Birefringence in Bis(2‐pyridylimino)isoindolines: Synthesis and Structure–Property Analysis

A series of new substituted 1,3‐bis(2‐pyridylimino)isoindolines—1,3‐bis(2‐pyridylimino)‐5,6‐bis(2,6‐diisopropylphenoxy)isoindoline ( 2 b ), 1,3‐bis(2‐pyridylimino)‐5,6‐bis(4‐tert‐butylphenyl)isoindoline ( 2 c ), and 1,3‐bis(2‐pyridylimino)‐5‐tert‐butylisoindoline ( 2 d )—were synthesized and structurally characterized by single‐crystal X‐ray diffraction. The birefringence (Δn) of the crystals of unsubstituted 1,3‐bis(2‐pyridylimino)isoindoline ( 2 a ), 2 b , 2 c , and 2 d were measured and found to vary greatly, with Δn values of 0.0654(3), 0.0629(17), 0.588(10), 0.701(12), respectively. A structure–property relationship for the birefringence values of 2 a – 2 d was outlined and indicated that the anisotropy of the polarizability of the molecules plays a crucial role in the birefringence of the crystals. The greatest birefringence values are achieved when the molecules are oriented in a face‐to‐face configuration intermolecularly, and along the crystallographic face being measured.