Finite element,stream function-vorticity solution of secondary flow in the channels of a rod bundle

A finite element method has been applied to predict the overall features of the fully developed turbulent flow in the non-circular channels of a rod bundle. The finite element discretization is based on the conventional Galerkin method using an isoparametric quadrilateral element with mixed interpolation. The primary axial flow and turbulent kinetic energy distributions have been predicted for fully developed turbulent flow conditions right up to the wall. The secondary velocity is represented by the stream function-vorticity formulation and the no-slip boundary conditions are explicitly introduced in the nonlinear equations by a boundary vorticity formula. The Newton-Raphson method is applied to the stream function-vorticity equations and solved simultaneously by the frontal solution technique. A one-equation eddy viscosity model of turbulence and an algebraic stress transport model have been used to predict primary axial velocity, secondary velocities and turbulent kinetic energy. The predictions obtained for a central subchannel of an equilateral-triangular rod array with p/d= 1.3 are in reasonable agreement with experimental data.     

Numerical analysis of developing turbulent flow in a 180° bend tube by an algebraic Reynolds stress model

A numerical analysis has been performed for three‐dimensional developing turbulent flow in a 180° bend tube with straight inlet and outlet section used by an algebraic Reynolds stress model. To our knowledge, numerical investigations, which show the detailed comparison between calculated results and experimental data including distributions of Reynolds stresses, are few and far between. From this point of view, an algebraic Reynolds stress model in conjunction with boundary‐fitted co‐ordinate system is applied to a 180° bend tube in order to predict the anisotropic turbulent structure precisely. Calculated results are compared with the experimental data including distributions of Reynolds stresses. As a result of this analysis, it has been found that the calculated results show a comparatively good agreement with the experimental data of the time‐averaged velocity and the secondary vectors in both the bent tube and straight outlet sections. For example, the location of the maximum streamwise velocity, which appears near the top or bottom wall in the bent tube, is predicted correctly by the present method. As for the comparison of Reynolds stresses, the present method has been found to simulate many characteristic features of streamwise normal stress and shear stresses in the bent tube qualitatively and has a tendency to under‐predict its value quantitatively. Judging from the comparison between the calculated and the experimental results, the algebraic Reynolds stress model is applicable to the developing turbulent flow in a bent tube that is known as a flow with a strong convective effect. Copyright © 2005 John Wiley & Sons, Ltd.     

Prediction of turbulent offset jet flows with an assessment of QUICKER scheme

The QUICKER scheme extended for non-uniform rectangular grid systems has been applied to predict the turbulent offset jet flows. Computational results obtained with the QUICKER scheme are compared with those from the skew-upwind and the hybrid schemes. Computational results include the reattachment length, the velocity profile, the axial velocity decay curve, and the shear stress distribution. In the sense of an overall agreement with the experimental data, the QUICKER scheme is found to be superior to the other two schemes. Boundary conditions are carefully set up to account for various flow conditions. Special attention has been given to the set-up of entrainment boundary condition. It is emphasized that the numerical diffusion due to streamline-to-grid skewness far exceeds the turbulent diffusion in offset jet flows; therefore, a numerical scheme that would minimize the numerical diffusion is a prerequisite for a better prediction of the turbulent offset jet flows.     

Numerical simulation of an axisymmetric separated and reattached flow over a longitudinal blunt circular cylinder

This article presents a numerical investigation of turbulent flow in an axisymmetric separated and reattached flow over a longitudinal blunt circular cylinder. The governing equations were discretized by the finite-volume method and SIMPLER method was applied to solve the equations on a staggered grid. The turbulent flow was numerically simulated using the standard k–ε, Abe–Kondoh–Nagano (AKN) and Shear Stress Transport (SST) turbulence models. The comparisons made between numerical results and experimental measurements showed that the SST model is superior to other models in the present calculation.Computations were performed for three different Reynolds numbers of 6000, 10 000 and 20 000 based on the cylinder diameter. To our knowledge, this study represents the first numerical investigation of the present flow configuration. The computational results were validated with the available experimental data of reattachment length, mean velocity distribution and wall static pressure coefficient in the turbulent blunt circular cylinder flows. Further, other characteristics of the flow, such as turbulent kinetic energy, pressure, streamlines, and the velocity vectors are discussed.The results show that the main characteristics of the turbulence flow in the separation region, such as reattachment length or velocity profiles, are nearly independent of the Reynolds number. The obtained results showed that a secondary separation bubble may appear in the main separation bubble near the leading edge. Furthermore, it was found that the turbulent kinetic energy has a large effect on the formation of the secondary bubble.     

Instantaneous structure and statistical feature of unsteady flow in a channel obstructed by a square rod

A two-dimensional numerical computation has been made for an unsteady flow in a channel obstructed by an inserted square rod. The results of the computation made for the flow with a parabolic inlet velocity profile at a specific value of channel Reynolds number are analyzed in detail. The obtained results reveal that momentum transfer is enhanced due to the apparent shear stress resulting from the nonzero value of cross-correlation between the streamwise and normal components of fluctuating velocity, , just as in turbulent shear flows, although the studied flow is quite different from turbulent flows in the sense that it is highly periodical and therefore free from randomness. This periodicity leads to a quick recovery of the velocity defect in some region of the wake of the rod. Special attention is paid to the time variation of flow structure. The crisscross motion of the Karman vortex previously found to occur is discussed again, and how it appears is explained in terms of the interaction between the Karman vortex and the disturbed wall shear layer. In the discussion of this relationship, wavering motion of the separation vorticity layers formed on both sides of the rod and the periodic formation of an isolated vortex island from the lifted tip of the wall vorticity layer are analyzed. The vortex island is found to play an important role not only for the occurrence of the crisscross motion of Karman vortex but also for the generation of the nonzero value of .     

基于全局动态Vreman模型的复杂非定常湍流的大涡模拟

在湍流数值模拟方法中,大涡模拟方法可以提供丰富的大涡旋信息,已逐渐成为复杂湍流问题数值研究的重要方法。而大涡模拟中,最重要的一环是尽量准确地构建能反映流场物理本质特征的亚格子应力模型。基于该思想,将一种新型的大涡模拟亚格子应力模型-Vreman亚格子应力模型用于高雷诺数三维后台阶流动的求解,计算结果与实验结果进行对比分析结果较吻合,验证了该模型的可靠性。这是对该模型用于无任何均匀流动方向的高雷诺数复杂湍流非定常流动的首次检验,计算结果优于基于传统的Smagorinsky涡粘性的动态亚格子模型。     

Numerical calculation of Reynolds stresses in a square duct with secondary flow

A new model for the Reynolds stress equations is presented. This model is used to obtain a theoretical solution for the problem of fully developed turbulent flow in a square duct. Nine governing equations for the axial velocity, lateral vorticity, lateral stream function and six components of the Reynolds stresses are simultaneously solved, by a finite-difference technique. To ensure numerical stability of the solution a special linearised implicit representation of the source terms is proposed, and simultaneous solution of the equations at each.mesh point is obtained. Near the wall a special procedure is used, by which the Reynolds stress equations are assumed to be in local equilibrium, and the velocity profile is assumed to be logarithmic. However, due to the secondary motion the logarithmic velocity profile is inclined to the axial direction. The results bear reasonable agreement with experimental data. Computer time requirements are moderate.     

Measurements of turbulent developing flow in a moderately curved square duct

Laser-Doppler measurements in the turbulent flow in a right-angled bend of square cross-section, radius/duct-width ratio 7.0, are presented and show the development of secondary circulation in cross-stream planes. Distribution of the streamwise and radial components of the mean velocity and turbulence intensity, and the corresponding Reynolds shear stress, are presented as contour plots and are intended for use in the further development of numerical flow prediction methods.     

全附体潜艇粘性流场的RANS模拟及场量和涡量的校验分析

采用相同拓扑结构和相近网格质量的4套网格和5种湍流模型,对全附体Suboff潜艇粘性流场进行RANS模拟,分析了网格密度、节点空间分布规律和湍流模型对计算精度的影响,详细校验了其力积分量、速度场量和涡量特征。结果表明:网格密度最大的G4网格(140万)计算精度最高,总阻力较实验值误差为0.723%,其采用SST湍流模型时最优。计算得到的压力系数和剪切应力系数分布均与实验值吻合很好;桨盘面速度等值线分布计算精度与文献相当,轴向相对速度0.9以上的计算半径稍大于实验值,其余半径与实验吻合较好;桨盘面上0.25倍半径处速度分量沿周向分布计算精度较文献高,轴向分量与实验值吻合较好,径向分量峰值稍小于实验值,但峰值所处周向位置与实验值一致。成功捕捉到了附体端面绕流诱导对旋涡、附体叶根截面下游处项链形涡对、尾翼端面尾缘上方附着涡蹄、附体马蹄涡系、尾翼截面通道流体挤压作用诱导涡以及桨盘面涡量汇集的潜艇涡量场特征,且围壳端面绕流诱导对旋涡沿流动方向持续稳定,不影响桨盘面涡量场,均与文献中由大涡模拟模拟得到的定性结论一致。研究表明,在网格密度较大、节点分布合理、网格质量较高、湍流模型选取适当和壁面函数使用有效的条件下,RANS模拟潜艇粘性流场的场量和涡量特征同样具有很高的计算精度,能够在工程应用中有力支撑新型艇型设计与性能分析。     

Numerical analysis of turbulent flow in a rotating U-bend with roughened walls

A numerical analysis has been performed for a developing turbulent flow in a rotating U-bend of strong curvature with rib-roughened walls using an anisotropic turbulent model. In this calculation, an algebraic Reynolds stress model is used to precisely predict Reynolds stresses, and a boundary-fitted coordinate system is introduced as a method of coordinate transformation to set the exact boundary conditions along the complicated shape of U-bend with rib-roughened walls. Calculated results for mean velocity and Reynolds stresses are compared to the experimental data in order to validate the proposed numerical method and the algebraic Reynolds stress model. Although agreement is certainly not perfect in all details, the present method can predict characteristic velocity profiles and reproduce the separated flow generated near the outer wall, which is located just downstream of the curved duct. The Reynolds stresses predicted by the proposed turbulent model agree well with the experimental data, except in regions of flow separation.     

Generation of turbulent inflow and initial conditions based on multi‐correlated random fields

Direct or large eddy simulation of a turbulent flow field is strongly influenced by its initial or inflow boundary condition. This paper presents a new stochastic approach to generate an artificial turbulent velocity field for initial or inflow boundary condition based on digital filtering. Each velocity component of the artificial turbulent velocity field is generated by linear combination of individual uncorrelated random fields. These uncorrelated random fields are obtained by filtering random white‐noise fields. Using common elements in these linear combinations results in multi‐correlation among different velocity components. The generated velocity field reproduces locally desired Reynolds stress components and integral length scales including cross‐integral length scales. The method appears to be simple, flexible and more accurate in comparison with previously developed methods. The accuracy and performance of the method are demonstrated by numerical simulation of a homogeneous turbulent shear flow with high and low shear rates. To assess the accuracy and performance of the method, simulation results are compared with a reference simulation. Copyright © 2007 John Wiley & Sons, Ltd.     

Computation of axisymmetric confined jets in a diffuser

The paper reports on a numerical study of turbulent confined jets in a conical duct with a 5° divergence. The flow has a large ratio of jet to ambient velocities at the entrance so that it gives rise to strong recirculation. The calculations are carried out with a general finite volume method designed for calculating incompressible elliptic flows with complex boundaries. Turbulence is simulated by the standard κ–? model. The sensitivity of the solution to numerical discretization errors is examined using three convection schemes, i.e. hybrid central/upwind differencing, QUICK and SOUCUP, on two grids consisting of 68 × 50 and 102 × 82 points respectively. An examination is also made of the influence of inlet boundary conditions on the predicted flow field. The computed results are compared with experimental data for mean axial velocity, turbulent shear stress and turbulent kinetic energy profiles. It is shown that the calculations reproduce the essential features of the flow observed in the experiments.     

Calculation of turbulent fluid flow and heat transfer in ducts by a full Reynolds stress model

A computational method has been developed to predict the turbulent Reynolds stresses and turbulent heat fluxes in ducts by different turbulence models. The turbulent Reynolds stresses and other turbulent flow quantities are predicted with a full Reynolds stress model (RSM). The turbulent heat fluxes are modelled by a SED concept, the GGDH and the WET methods. Two wall functions are used, one for the velocity field and one for the temperature field. All the models are implemented for an arbitrary three‐dimensional channel. Fully developed condition is achieved by imposing cyclic boundary conditions in the main flow direction. The numerical approach is based on the finite volume technique with a non‐staggered grid arrangement. The pressure–velocity coupling is handled by using the SIMPLEC‐algorithm. The convective terms are treated by the van Leer scheme while the diffusive terms are handled by the central‐difference scheme. The hybrid scheme is used for solving the ε equation. The secondary flow generation using the RSM model is compared with a non‐linear k–ε model (non‐linear eddy viscosity model). The overall comparison between the models is presented in terms of the friction factor and Nusselt number. Copyright © 2003 John Wiley & Sons, Ltd.     

Effect of the measurement volume in turbulent pipe flow measurement by the ultrasonic velocity profile method (mean velocity profile and Reynolds stress measurement)

 The ultrasonic velocity profile measurement method has some favorable advantages over the conventional flow measurement methods, such as measurement of the instantaneous velocity profile over the measuring line and its applicability to opaque liquids. The method has another advantage of being non-intrusive. Hence, it is applicable to various flow conditions, although it requires a relatively large measurement volume. In this paper, the effects of the measurement volume on the mean velocity profile and the Reynolds stress measurement have been investigated for fully developed turbulent flows in a vertical pipe. The results were then compared with data obtained by direct numerical simulation. Received: 9 March 2000 / Accepted: 27 March 2001 Published online: 29 November 2001     

Performance of RNG Turbulence Modelling for Forced Convective Heat Transfer in Ducts

This investigation concerns numerical calculation of turbulent forced convective heat transfer and fluid flow in straight ducts using the RNG (Re-Normalized Group) turbulence method.

A computational method has been developed to predict the turbulent Reynolds stresses and turbulent heat fluxes in ducts with different turbulence models. The turbulent Reynolds stresses and other turbulent flow quantities are predicted with the RNG κ?ε model and the RNG non-linear κ-ε model of Speziale. The turbulent heat fluxes are modeled by the simple eddy diffusivity (SED) concept, GGDH and WET methods. Two wall functions are used, one for the velocity field and one for the temperature field. All the models arc implemented for an arbitrary three dimensional duct.

Fully developed condition is achieved by imposing cyclic boundary conditions in the main flow direction. The numerical approach is based on the finite volume technique with a non-staggered grid arrangement. The pressure-velocity coupling is handled by using the SIMPLEC-algorithm. The convective terms are treated by the QUICK, scheme while the diffusive terms are handled by the central-difference scheme. The hybrid scheme is used for solving the κ and ε equations.

The overall comparison between the models is presented in terms of friction factor and Nusselt number. The secondary flow generation is also of major concern.     

Assessment of LES Subgrid-scale Models and Investigation of Hydrodynamic Behaviour for an Axisymmetrical Bluff Body Flow

This work is concerned with the investigation of fluid-mechanical behaviour and the performance of different subgrid-scale models for LES in the numerical prediction of a confined axisymmetrical bluff-body flow. Four subgrid-scale turbulence models comprising the Smagorinsky model, Dynamic Smagorinsky model, WALE model and subgrid turbulent kinetic energy model, are validated and compared directly against the experimental data. Two different mesh counts are used for the LES studies, one with a higher mesh resolution in the shear layer than the other. It is found that increasing the mesh resolution improves the time-averaged fluctuating velocity profiles, but has less effect on the time-averaged filtered velocity profiles. A comparison against experiment shows that the recirculation zone length is well predicted using LES. The accuracy of the four different subgrid scale models is then assessed by comparing the LES results using the dense mesh with the experiment. Comparisons with the time-averaged axial and radial velocity profiles demonstrate that LES displays good agreement with the experimental data, with the essential flow features captured both qualitative and quantitatively. The subgrid velocity also matches well with the experimental results, but a slight underprediction of the inner shear layer is observed for all subgrid models. In general, it is found that the Smagorinsky and WALE models are more dissipative than the Dynamic Smagorinsky model and subgrid TKE model. Comparison of the spectra against the experiment shows that LES can capture dominant features of the turbulent flow with reasonable accuracy, and weak spectral peaks related to the Kevin-Helmholtz instability and helical vortex shedding are present.     

Numerical analysis of turbulent flow separation in a rectangular duct with a sharp 180‐degree turn by algebraic Reynolds stress model

Turbulent flow in a rectangular duct with a sharp 180‐degree turn is difficult to predict numerically because the flow behavior is influenced by several types of forces, including centrifugal force, pressure‐driven force, and shear stress generated by anisotropic turbulence. In particular, this type of flow is characterized by a large‐scale separated flow, and it is difficult to predict the reattachment point of a separated flow. Numerical analysis has been performed for a turbulent flow in a rectangular duct with a sharp 180‐degree turn using the algebraic Reynolds stress model. A boundary‐fitted coordinate system is introduced as a method for coordinate transformation to set the boundary conditions next to complicated shapes. The calculated results are compared with the experimental data, as measured by a laser‐Doppler anemometer, in order to examine the validity of the proposed numerical method and turbulent model. In addition, the possibility of improving the wall function method in the separated flow region is examined by replacing the log‐law velocity profile for a smooth wall with that for a rough wall. The analysis results indicated that the proposed algebraic Reynolds stress model can be used to reasonably predict the turbulent flow in a rectangular duct with a sharp 180‐degree turn. In particular, the calculated reattachment point of a separated flow, which is difficult to predict in a turbulent flow, agrees well with the experimental results. In addition, the calculation results suggest that the wall function method using the log‐law velocity profile for a rough wall over a separated flow region has some potential for improving the prediction accuracy. Copyright © 2007 John Wiley & Sons, Ltd.     

Numerical analysis of turbulent structure in compound meandering open channel by algebraic Reynolds stress model

The turbulent flow in a compound meandering channel with a rectangular cross section is one of the most complicated turbulent flows, because the flow behaviour is influenced by several kinds of forces, including centrifugal forces, pressure‐driven forces and shear stresses generated by momentum transfer between the main channel and the flood plain. Numerical analysis has been performed for the fully developed turbulent flow in a compound meandering open‐channel flow using an algebraic Reynolds stress model. The boundary‐fitted coordinate system is introduced as a method for coordinate transformation in order to set the boundary conditions along the complicated shape of the meandering open channel. The turbulence model consists of transport equations for turbulent energy and dissipation, in conjunction with an algebraic stress model based on the Reynolds stress transport equations. With reference to the pressure–strain term, we have made use of a modified pressure–strain term. The boundary condition of the fluctuating vertical velocity is set to zero not only for the free surface, but also for computational grid points next to the free surface, because experimental results have shown that the fluctuating vertical velocity approaches zero near the free surface. In order to examine the validity of the present numerical method and the turbulent model, the calculated results are compared with experimental data measured by laser Doppler anemometer. In addition, the compound meandering open channel is clarified somewhat based on the calculated results. As a result of the analysis, the present algebraic Reynolds stress model is shown to be able to reasonably predict the turbulent flow in a compound meandering open channel. Copyright © 2005 John Wiley & Sons, Ltd.     

强吸气旋转圆筒壁面湍流边界层建模及计算

提出了湍流边界层的一种简单、快速计算方法, 用以求解强吸气作用下旋转圆筒表面边界层流动. 首先, 理论分析了同心圆筒间的旋转流体运动, 外筒静止、内筒旋转且为多孔吸气条件. 强吸气情况下旋转流动主要表现为内筒壁面附近的边界层流动, 基于这一事实得到了周向速度分布的解析表达式. 其次, 通过引入新参数扩展Cebeci-Smith代数湍流模型, 使其能考虑流线曲率、壁面吸气、低Reynolds数效应等因素. 针对这些因素的综合影响, 采用解析修正和经验参数对模型进行调整. 同时, 基于Reynolds应力湍流模型的仿真结果, 校准代数湍流模型中的经验参数. 最后, 给出基于广义Cebeci-Smith湍流模型的旋转壁面边界层流动的迭代算法, 该算法适用于需要特殊迭代过程的轴向及周向流动均匀情况. 计算了不同旋转速度和吸气强度组合工况下的边界层流动, 其周向速度和湍流强度分布与基于Reynolds应力湍流模型的计算结果非常接近. 并且表明, 当Reynolds应力湍流模型数值模拟预测内筒边界层为稳定层流时, 该方法也再现了相同初始条件下的层流边界层.