Poly(styrene-b-2-vinylpyridine-1-oxide) and poly(dimethyl-siloxane-b-2-vinylpyridine-1-oxide) diblock copolymers 2. Micellar solutions in water/propan-2-ol mixtures

Dynamic light scattering and viscometry measurements have been carried out on three AB diblock copolymers in water/propan-2-ol mixtures. The A moieties in each case were poly(2-vinylpyridine-1-oxide) for which both water and propan-2-ol are good solvents. The B Moieties were either polystyrene or polydimethylsiloxane, for which both water and propan-2-ol are poor solvents, but water is the worse solvent. In all cases, the hydrodynamic size of the micelles (assumed spherical) was found to increase with increasing water content in the solvent mixture; the aggregation number was also found to increase. The former finding is in agreement with the theoretical predictions of Munch and Gast, but not the latter.     

Experimental and Theoretical Description of Binary Mixtures Containing Monohydric Alcohols

The densities and speeds of sound in the pentan-1-ol + nonan-1-ol, pentan-1-ol + dekan-1-ol, propan-1-ol + hexan-1-ol, and propan-2-ol + hexan-1-ol binary systems have been measured within the whole composition range at 298.15 K. The quantities determined from the measurement data have been plotted as functions of composition. The excess molar volumes have been interpreted on the basis of results of the Symmetrical Extended Real Associated Solution Model (S-ERAS).     

Theoretical Description of Excess Molar Functions in the Case of Very Small Excess Values. Investigation of Excess Molar Volumes of Propan-2-ol + Alkanol Mixtures

The densities of propan-2-ol + pentan-1-ol, + hexan-1-ol, + heptan-1-ol, + octan-1-ol + nonan-1-ol and speeds of sound in propan-2-ol + pentan-1-ol, + heptan-1-ol, + nonan-1-ol have been measured over the whole composition range at 298.15 K. Excess molar functions determined from the experimental data have been plotted as functions of composition. The excess molar volumes have been interpreted on the basis of the Symmetrical Extended Real Associated Solution Model (S-ERAS).     

Solvatochromic parameters for binary mixtures of an ionic liquid with various protic molecular solvents

Abstract  Solvatochromic parameters (E _T ^N, normalized polarity parameter; π*, dipolarity/polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen-bond donor acidity) have been determined for binary mixtures of propan-2-ol, propan-1-ol, ethanol, methanol and water with recently synthesized ionic liquid (IL; 2-hydroxyethylammonium formate) at 25 °C. In all solutions except aqueous solution, E _T ^N values of the media increase abruptly with the ILs mole fraction and then increase gradually to the value of pure IL. A synergistic behavior is observed for the α parameter in all solutions. The behavior of π* and β are nearly ideal for all solutions except for solutions of methanol with the IL. The applicability of nearly ideal combined binary solvent/Redlich–Kister equation was proved for the correlation of various solvatochromic parameters with solvent composition. The correlation between the calculated and the experimental values of various parameters was in accordance with this model. Solute–solvent and solvent–solvent interactions were applied to interpret the results. Graphical Abstract  Predicted values of solvatochromic parameters (SP) (E _T ^N, normalized polarity parameter; π*, dipolarity/polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen-bond donor acidity) from the correlation equations versus its experimental values for binary mixtures of 2-hydroxyethylammonium formate with water, methanol, ethanol, propan-1-ol and propan-2-ol.      

Effect of solvent on the kinetics of arylsulfonylation of N-alkylated anilines in a water-propan-2-ol system

The effect of the composition of a water-propan-2-ol solvent on the kinetics of arylsulfonylation of N-ethyl-, N-isopropyl-, and N-butylanilines with 3-nitrobenzenesulfonyl chloride at 298 K was studied. The reaction rate constant increases monotonically with an increase in the water fraction in the solvent from 5 to 30 wt.%. The apparent activation parameters of the reaction of N-butylaniline with 3-nitrobenzenesulfonyl chloride were calculated. No considerable changes in the activation parameters of the reaction were observed on going from pure propan-2-ol to a 10% aqueous solution, which indicates that the mechanism remains unchanged upon solvent change. Propan-2-ol with a water content of 5–30 wt.% can be used in the synthesis of arylsulfonylation products of the amines under study in 98–99% yield. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 937–939, June, 2006.     

Xanthogenation of Lignocarbohydrates by Carbon Disulfide

High-molecular-weight products containing 4.21-10.4% bound sulfur that are soluble (32-86%) in aqueous alkaline solutions are obtained from xanthogenation of lignocarbohydrates by carbon disulfide in the presence of NaOH in propan-2-ol. The degree of preliminary alkaline activation of the raw material in propan-2-ol has the principal effect on the composition and physicochemical properties of the xanthogenation products.     

Excess enthalpies for mixtures of cyclohexanone with isomeric propanols and butanols at 298.15 K

Excess enthalpies (H ^E ) for mixtures of cyclohexanone with propan-1-ol. propan-2-ol, butan-1-ol, butan-2-ol and 2-methyl propan-1-ol at 298.15 K have been measured over the entire composition range. All mixed endothermically with the maximum values ofH ^E occurring at equimole fraction. Comments about the molecular interactions contributing to the excess enthalpies of a cyclic ketone + an alcohol are made on the basis of these results.     

Poly(styrene-b-2-vinylpyridine-1-oxide) diblock copolymers: 3. Microemulsions in water/propan-2-ol/toluene mixtures

Pseudo-ternary phase diagrams have been constructed for the three-component solvent system (toluene+water+propan-2-ol) containing diblock copolymers of poly(styrene-b-2-vinylpyridine-1-oxide). Microemulsions have been shown to form on the water-rich side of the phase diagram, in the region of the phase boundary without polymer. Dynamic light-scattering experiments have led to droplet size values in the region of 100 nm, with the size depending strongly on the propan-2-ol/water concentration, as well as the amount of solubilised toluene in the core. Viscometry experiments have been carried out to measure polymer aggregation numbers in the microemulsion droplets, and interfacial tension measurements have shown that in the absence of propan-2-ol (effectively a cosurfactant) the limiting value of the oil/water interfacial tension, even an saturation adsorption of the copolymer is 20 mNm^–1. However, addition of propan-2-ol reduces the interfacial tension to the very low values generall commensurate with microemulsion formation.     

Excess molar enthalpies of R-fenchone + propan-1-ol or +propan-2-ol. Modeling with COSMO-RS and UNIFAC

In this paper, experimental excess molar enthalpies for the binary mixtures of R-fenchone with propan-1-ol or propan-2-ol, at four temperatures (283.15, 298.15, 313.15 and 328.15) K and atmospheric pressure are reported over the entire composition range. They have been fitted to the Redlich–Kister equation at each temperature. Excess molar enthalpies are positive in all cases, being greater for the mixture with propan-2-ol than for the mixture with propan-1-ol. These positive values of the excess enthalpy suggest the predominance of the effect due to hydrogen bond breaking over the interaction between dissimilar molecules in the mixture. Finally UNIFAC (Dortmund) method and the Quantum Continuum Method COSMO-RS have been used to predict the excess molar enthalpies. Better predictions are obtained in the case of UNIFAC model.     

Solvatochromic parameters for binary mixtures of an ionic liquid with various protic molecular solvents

Abstract  

Solvatochromic parameters (E _T ^N, normalized polarity parameter; π*, dipolarity/polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen-bond donor acidity) have been determined for binary mixtures of propan-2-ol, propan-1-ol, ethanol, methanol and water with recently synthesized ionic liquid (IL; 2-hydroxyethylammonium formate) at 25 °C. In all solutions except aqueous solution, E _T ^N values of the media increase abruptly with the ILs mole fraction and then increase gradually to the value of pure IL. A synergistic behavior is observed for the α parameter in all solutions. The behavior of π* and β are nearly ideal for all solutions except for solutions of methanol with the IL. The applicability of nearly ideal combined binary solvent/Redlich–Kister equation was proved for the correlation of various solvatochromic parameters with solvent composition. The correlation between the calculated and the experimental values of various parameters was in accordance with this model. Solute–solvent and solvent–solvent interactions were applied to interpret the results.     

Photochromism of 2-(2,4-dinitrobenzyl)benzimidazole in solution

Spectral and kinetic parameters of photochromic 2-(2,4-dinitrobenzyl)benzimidazole in various solvents were studied by flash photolysis. The absorption band of the photoinduced colored form of 2-(2,4-dinitrobenzyl)benzimidazole shifts red with rise in the relative dielectric constant of the solvent. The rate of bleaching of the photoinduced species in ethanol, propan-2-ol, acetone, acetonitrile, and dimethyl sulfoxide is lower by 2–3 orders of magnitude than in benzene, toluene, and hexane due to formation of intermolecular hydrogen bond with the solvent.     

CO2 laser-induced decomposition of propan-2-ol,butan-2-ol,pentan-2-ol,pentan-3-ol,and hexan-2-ol

The pulsed CO₂ laser-induced decompositions of propan-2-ol, butan-2-ol, pentan-2-ol, pentan-3-ol, and hexan-2-ol in the gas phase have been investigated. Like ethanol which we examined previously [1] the absorption cross section of propan-2-ol for pulsed 9R14 radiation increases with pressure at low pressures, an effect attributed to rotational hole-filling. In contrast the absorption cross section of butan-2-ol (10R24) has only a small pressure dependence and those of pentan-2-ol (9R26), pentan-3-ol (10R14), and hexan-2-ol (9P20) show little or no variation with pressure in the range 0.1–5.0 torr. Decomposition products have been investigated at low pressure where the excitation of the alkanols was essentially collision free. The observed products for all the alkanols can be rationalized on the basis of primary dehydration and C? C fission channels, with minor contributions from other molecular eliminations. © 1994 John Wiley & Sons, Inc.     

Cyclodextrin derivative-coated quartz crystal microbalances for alcohol sensing and application as methanol sensors.

Three novel cyclodextrin derivatives, mono(6-benzylimino-6-deoxy)-beta-cyclodextrin (2), mono-(6-cyclohexylamino-6-deoxy)-beta-cyclodextrin (3) and mono(6-benzylamino-6-deoxy)-beta-cyclodextrin (4), together with mono(6-phenylamino-6-deoxy)-beta-cyclodextrin (1), were synthesized and employed as sensing materials coated on quartz crystal microbalances (QCMs). Comparison of the responses to some alcohol and solvent vapours such as methanol, ethanol, propan-1-ol, propan-2-ol, butan-1-ol, acetone, chloroform and benzene indicated that these beta-cyclodextrin derivatives show considerable sensitivity and selectivity towards methanol. It shows a good linear relationship between the frequency shift and the methanol concentration in the range 3-160 mg L(-1) for 2-4 and 3-140 mg L(-1) for 1. The correlation coefficients are 0.9971, 0.9983, 0.9973 and 0.9977, respectively. The limit of detection (LOD) is 0.2 mg L(-1). When small amounts of other vapours co-exist, e.g., ethanol, propan-1-ol and acetone, the responses differ from that of pure methanol vapour, and a deduction method could eliminate this cross-sensitivity. The water cross-sensitivity was very low. These QCMs coated with cyclodextrin derivatives are employed as methanol sensors in the real atmosphere to detect on-line the concentration of methanol vapour.     

Methacrylate monolithic columns of 320 microm I.D. for capillary liquid chromatography

Monolithic capillary columns (320 microm I.D.) were prepared for capillary liquid chromatography (CLC) by radical polymerization of butylmethacrylate (BMA) and ethylenedimethacrylate (EDMA) in the presence of a porogen solvent containing propan-1-ol, butane-1,4-diol and water. The influence of the contents of the porogen solvent and EDMA in the polymerization mixture on the monolith porosity and column efficiency was investigated. The composition of the polymerization mixture was optimized to attain a minimum HETP of the order of tens of microm for test compounds with various polarities. The separation performance and selectivity of the most efficient monolithic column prepared was characterized by van Deemter curves, peak asymmetry factors and Walters hydrophobicity and silanol indices. It was demonstrated that the 320-microm I.D. monolithic column exhibited CLC separation performance similar to that observed for 100- and 150-microm I.D. monolithic columns reported in the literature; moreover, the 320-microm I.D. column was easier to operate in CLC and exhibited a higher sample loadability.     

Thermodynamic and acoustical properties of mixtures <Emphasis Type="Italic">p</Emphasis>-anisaldehyde—alkanols (C<Subscript>1</Subscript>–C<Subscript>4</Subscript>)—2-methyl-1-propanol at 303.15 K

The density, viscosity and speed of sound of pure p-anisaldehyde and some alkanols, for example, methanol, ethanol, propan-1-ol, propan-2-ol, butan-1-ol, butan-2-ol, 2-methylpropan-1-ol, and the binary mixtures of p-anisaldehyde with these alkanols were measured over the entire composition range at 303.15 K. From the experimental data, various thermodynamic parameters such as excess molar volume (V^E), excess Gibbs free energy of activation (ΔG*^E), and deviation parameters like viscosity (Δη), speed of sound (Δu), isentropic compressibility (Δκ_s), are calculated. The excess as well as deviation parameters are fitted to Redlich—Kister equation. Additionally, the viscosity data for the systems has been used to correlate the application of empirical relation given by Grunberg and Nissan, Katti and Chaudhari, and Hind et al. The results are discussed in terms of specific interactions present in the mixtures.     

Topological investigations of the molecular species and molecular interactions that characterize pyrrolidin-2-one + lower alkanol mixtures

Molar excess volumes, V^E, molar excess enthalpies, H^E, and speeds of sound data, u, of pyrrolidin-2-one (i) + ethanol or propan-1-ol or propan-2-ol or butan-1-ol (j) binary mixtures have been determined over entire composition range at 308.15 K. The observed speeds of sound data have been utilized to predict excess isentropic compressibilities, of the investigated binary mixtures. The observed excess thermodynamic properties V^E, H^E and have been analyzed in terms of Graph theory. The analysis of V^E data by the Graph theory suggests that pyrrolidin-2-one exists mainly as a mixture of cyclic and open dimer; ethanol as a mixture of dimer and trimer; butan-1-ol and propan-2-ol as mixture of monomer and dimer and propan-1-ol as a dimer in the pure state, and their mixtures contain 1:1 molecular complex. The IR studies lend additional credence to the nature and extent of interactions for the proposed molecular entities in the mixtures. Also, it has been observed that V^E, H^E and values predicted by the Graph theory compare well to with their corresponding experimental values.     

Excess Thermodynamic Properties of Binary Liquid Mixtures Containing N,N -Dimethylacetamide with Some Alkan-1-Ols (C 1 -C 6 ) At 298.15 K

Excess molar enthalpies, $ H_m^E $ of N , N -dimethylacetamide + methanol, + ethanol, + propan-1-ol, + butan-1-ol, + pentan-1-ol, and + hexane-1-ol have been determined at 298.15 K and atmospheric pressure using a Parr 1455 solution calorimeter. While the excess molar enthalpies are negative for methanol and ethanol mixtures, those for propan-1-ol, butan-1-o1, pentane-1-ol, and hexan-1-ol mixtures are positive over the entire range of composition of N , N -dimethylacetamide. The $ H_m^E $ at around x , 0.5 follow the order: methanol<ethanol<propan-1-ol<butan-1-ol<pentan-1-ol<hexan-1-ol. The results are explained in terms of the self-association exhibited by the alkan-1-ols and the formation of aggregates between unlike molecules through OHO hydrogen bonding. The experimental results for mixtures are well represented by the Redlich - Kister equation.     

Complex Formation of Crown Ethers and Cations in Water–Organic Solvent Mixtures: Part XI. Effects of the Preferential Solvation of Benzo-15-Crown-5 and Acid-Base Properties of the Mixtures on the Thermodynamic Functions for Complex Formation of Benzo-15-Crown-5 with Na+ in Propan-1-ol–Water Mixtures at 298.15 K

The thermodynamic functions of complex formation of benzo-15-crown-5 ether (B15C5) and sodium cation (Na⁺) in the mixtures of propan-1-ol (PrOH) with water at 298.15 K have been calculated from experimental measurements. The equilibrium constants of B15C5/Na⁺ complex formation have been determined by conductivity measurements. The enthalpic effect of complex formation has been measured by a calorimetric method. The complexes are enthalpy stabilized but entropy destabilized in the PrOH–H₂O mixtures. The effects of preferential solvation of B15C5 by molecules of the organic solvent, solvation of the sodium cation, as well as the acid-base properties of propan-1-ol–water mixtures on the complex formation processes are discussed.     

Study of molecular interactions in the polar binary mixtures of N-methyl aniline and alcohols,using excess dielectric and thermodynamic parameters

Molecular interactions between the polar systems N-methyl aniline and alcohols (propan-1-ol/propan-2-ol) for various mole fractions at different temperatures are studied by determining the dielectric permittivity using LF impedance analyzer, Microwave bench and Abbe’s refractometer in radio, microwave and optic frequency regions respectively. The dipole moment, excess dipole moment, excess Helmholtz energy, excess permittivity, excess inverse relaxation time and excess thermodynamic values are calculated using experimental results. The optimized geometry, harmonic vibrational wave numbers and dipole moments of pure and equimolar binary mixtures have been calculated theoretically from the ab initio Hartree–Fock (HF) and Density Functional Theory (DFT – B3LYP) methods with 6-31+G¹ and 6-311+G⁷ basis sets using Spartan 08 modelling software. Conformational analysis of the formation of hydrogen bond in the equimolar binary mixture systems of N-methyl aniline and alcohols (propan-1-ol/propan-2-ol) is supported by experimental FT-IR spectra. The calculated wave numbers and dipole moments agree well with the experimental values. Further, the correlations among the parameters are discussed in detail.     

Interaction of 2,2,6,6-tetramethylpiperidine-1-oxyl chloritewith alcohols

The kinetics of the oxidation of a series of alcohols (viz., ethanol, propan-2-ol, butan-1-ol, butan-2-ol, heptan-4-ol, decan-2-ol, propan-1,3-diol, butan-2,3-diol, cyclohexanol, benzyl alcohol, and borneol) with the oxoammonium salt 2,2,6,6-tetramethylpiperidine-1-oxyl chlorite in acetonitrile was studied by spectrophotometry. The products of oxidation of primary alcohols are the corresponding aldehydes and carboxylic acids, and the products of oxidation of secondary alcohols are ketones. The reaction rate is described by the second order equation. The rate constants and activation parameters were determined. The rate constant as a function of the alcohol nature is described by the one-parameter Taft equation.