熔盐法制备氧化锆纳米棒

采用非水解溶胶-凝胶工艺合成氧化锆干凝胶粉,然后将干凝胶粉与熔盐混合制备氧化锆纳米棒。借助DTA-TG、XRD、FE-SEM、TEM等测试手段研究了氧化锆的物相转变过程,探讨了熔盐种类与用量、氟化物的添加等工艺参数对制备氧化锆纳米棒的影响。结果表明:以Na VO3为熔盐,用量为1∶1(熔盐与干凝胶的质量比),并且在添加氟化钠的条件下能够制备产率高,且沿[010]方向择优生长的单斜氧化锆纳米棒;氟离子一方面加速了熔盐中Zr4+离子的传质,促使氧化锆干凝胶粉的溶解,另一方面吸附在氧化锆的高能晶面上抑制该晶面的生长,两者的共同作用促进了大量氧化锆纳米棒的形成。     

熔盐法制备氧化锆纳米棒

采用非水解溶胶-凝胶工艺合成氧化锆干凝胶粉,然后将干凝胶粉与熔盐混合制备氧化锆纳米棒。借助DTA-TG、XRD、FE-SEM、TEM等测试手段研究了氧化锆的物相转变过程,探讨了熔盐种类与用量、氟化物的添加等工艺参数对制备氧化锆纳米棒的影响。结果表明：以NaVO₃为熔盐,用量为1：1（熔盐与干凝胶的质量比）,并且在添加氟化钠的条件下能够制备产率高,且沿[010] 方向择优生长的单斜氧化锆纳米棒;氟离子一方面加速了熔盐中Zr⁴⁺离子的传质,促使氧化锆干凝胶粉的溶解,另一方面吸附在氧化锆的高能晶面上抑制该晶面的生长,两者的共同作用促进了大量氧化锆纳米棒的形成。     

溶胶凝胶法制备片状氧化硅/氧化锆纳米复合材料(英文)

以氧氯化锆和二甲基二乙氧基硅烷为前驱体,在无任何表面活性剂的条件下,利用溶胶-凝胶法制备了片状SiO_2/ZrO_2复合材料.采用X射线衍射仪、扫描电镜、能谱仪、傅立叶变换红外光谱仪、透射电镜等分析了产物的结构和形貌,并探讨了SiO_2/ZrIO_2纳米复合材料的取向生长机理.结果表明,在正丁醇和水的混合溶液中制备的SiO_2/ZrO_2纳米复合材料的粒径为18nm,将干凝胶的500℃空气气氛中焙烧2h可以得到四方相片状氧化锆晶体.化合物中的硅原子通过Si—O—Zr化学键与锆原子相连;硅的引入仅影响氧化锆晶体的形貌,而不导致四方相氧化锆结构和尺寸的改变.本文所述方法可望拓展用于制备其他具有类似分级结构的无机功能纳米材料.     

声场对水合氧化锆凝胶特性的影响

氧化锆具有良好的光学、热学、电学和机械性质[1],氧化锆纳米粉体是制备高性能氧化锆陶瓷的主要材料。溶胶 凝胶法是制备氧化锆纳米粉体的方法之一[2],避免形成硬团聚体是一个关键问题。水合氧化锆干凝胶中非架桥羟基是粉末产生硬团聚体的根源[2]。将超声波应用到溶胶 凝胶过程中可以改变硅凝胶的结构[3],本文对声扬作用下水合氧化锆凝胶的形貌、热特性以及红外吸收光谱等进行分析,研究声场对水合氧化锆凝胶特性的影响,以探讨声场减少硬团聚体形成的机理。1　实验部分1 1　主要仪器日本JEM 100CXII型透射电子显微镜,加速电压200kV;…     

植物多糖干凝胶的制备及其力学性能

以植物多糖淀粉、魔芋葡甘聚糖（KGM）为基材,采用物理改性及共混的方法,原料经溶胶-凝胶,冷冻干燥过程得到植物多糖干凝胶。通过正交试验,得到了制备植物多糖干凝胶的原料配方。探讨了制胶温度、搅拌时间、搅拌速率、溶液PH、预冷冻时间等因素对植物多糖干凝胶弹性、硬度的影响。采用响应曲面法对制备条件进行优化,得到的最佳制备条件为：制胶温度90℃、搅拌速率800r／min、搅拌时间70min、溶液pH-9、预冷冻时间14h、预冷冻温度-40℃、冷阱温度-50℃、真空度12．5kPa。该干凝胶的弹性、硬度分别为1．812mm和5．382N。扫描电镜的观察表明,该植物多糖干凝胶呈立体三维多孔网络结构。     

SiO2-AEO凝胶体系的织构特性

采用溶胶 凝胶法 ,以正硅酸乙酯 (TEOS)为前驱体 ,用脂肪醇聚氧乙烯醚 (AEO)为改性剂制备结构可控的多孔SiO2 干凝胶.结果表明 :通过调节添加量和聚合度以及溶胶老化时间可以对SiO2 干凝胶织构性质进行有效的调控 ;采用不同的环境气氛对SiO2 AEO干凝胶进行热处理 ,则AEO表现出不同的热稳定性 ;经热处理后 ,AEO等有机残留物被脱除的同时 ,SiO2 AEO干凝胶柔性骨架得到加强 ,孔分布更趋集中 ,干凝胶结构的热稳定性得到进一步提高.     

Ce_2Mo_3O_(12)超微粒子的制备及催化性能

以硝酸铈和钼酸铵为原料 ,采用溶胶 -凝胶法和微波加热技术制备了Ce2 Mo3 O12 超微粒子催化剂 ,使用DTA -TG ,IR ,XRD以及BET比表面测试等表征手段 ,考察了制备条件对复合氧化物超微粒子形成 ,晶相和比表面积的影响 .同时 ,测试了该样品对甲苯选择性氧化制苯甲醛反应的催化性能 .结果表明 :制备Ce2 Mo3 O12 超微粒子的适宜条件为 :初始溶液pH =1.0 ,柠檬酸 / (铈 +钼 )摩尔比等于 0 .4 ,在此条件下制得的干凝胶 ,经微波加热处理后 ,粒子的比表面积为 35 .8m2 /g ,粒径约为 4 0nm .在由甲苯气相选择氧化制苯甲醛的反应中表现出较好的催化活性     

SiO2-PEG凝胶体系织构特性的研究

采用溶胶-凝胶法,以正硅酸乙酯(TEOS)为前驱体,以不同分子量的聚乙二醇(PEG)为改性剂,制备结构可控的多孔SiO₂干凝胶.结果表明:PEG限制了TEOS的水解反应,进而对溶胶粒子的表面进行修饰,形成“粒子团-PEG”聚集体及短程有序的环状网络结构,由此对SiO₂干凝胶的结构性质进行调控.经真空热处理后,PEG等有机残留物被脱除的同时,SiO₂-PEG干凝胶柔性骨架得到加强,孔分布更趋集中,干凝胶结构的热稳定性得到进一步提高.     

溶胶-凝胶法制备Ni-SiO2催化剂的表征与性能

以正硅酸乙酯和硝酸镍为原料,采用溶胶-凝胶法,将硝酸镍分别溶于水和乙醇制得凝胶,分别经超临界干燥和常规干燥制备了一系列Ni-SiO2气凝胶和干凝胶催化剂,运用BET、XRD、TPR、IR、H2-TPD和活性评价等方法对催化剂的物理化学性质和催化间二硝基苯加氢性能进行研究.结果表明,Ni-SiO2气凝胶催化剂均具有较高的比表面积,但由于金属镍烧结导致活性比表面积较小,加氢性能较差;以乙醇为溶剂制备的干凝胶催化剂的镍物种分散度较高,但镍与载体之间的相互作用过强,致使催化剂的还原度降低,活性组分利用率下降;以水为溶剂制备的干凝胶催化剂具有较高的活性比表面积,表现出很高的催化活性和选择性.     

超细钙钛矿型PrMnO3制备、表征及光催化

以Pr6O11和Mn(NO3)2为主要原料,采用"溶胶-凝胶"法结合"真空干燥"技术制备超细钙钛矿型PrMnO3;用TG-DTA,TEM,XRD,FT-IR等手段进行表征;以紫外灯为光源,用超细PrMnO3光催化降解甲基橙溶液.结果显示:170 ℃真空干燥制得的Pr-Mn干凝胶为无定形的疏松土黄色粉末,由大量直径介于10～20 nm的球形小颗粒组成;Pr-Mn干凝胶热处理过程中,500 ℃时出现晶相Pr6O11,700 ℃时产生晶相Mn2O3,Pr影响了Pr-Mn干凝胶中Mn的晶化,900 ℃时得到粒径小于100nm结晶度较好的纯晶相钙钛矿PrMnO3;以300 W紫外灯为光源,用0.50 g超细PrMnO3处理10 mg·L-1甲基橙溶液1000 ml,2 h即可完全降解,该降解过程属动力学一级反应.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.