An experimental study on the effect of mesoporous silica addition on ion conductivity of poly(ethylene oxide) electrolytes

Solid polymer electrolyte (SPE) composites, which are composed of poly(ethylene oxide) (PEO), mesoporous silica (SBA-15), and lithium salt were prepared in order to investigate the influence of SBA-15 content on the ionic conductivity of the composites. The ionic conductivity of the SPE composites was monitored by frequency response analyzer (FRA), and the crystallinity of the SPE composites was evaluated by using XRD. As a result, the addition of SBA-15 to the polymer mixture inhibited the growth of PEO crystalline domain, due to the mesoporous structure of the SBA-15. Also, the PEO₁₆LiClO₄/SBA-15 composite electrolytes show an increased ion conductivity as a function of SBA-15 content up to 15 wt.%. These ion conductivity characteristics are dependent on crystallinity with SBA-15 content.     

Effect of silane-functionalized mesoporous silica SBA-15 on performance of PEO-based composite polymer electrolytes

Silane-functionalized mesoporous silica SBA-15 particles with ultra-high specific surface area and large pore size were used as fillers in PEO-based solid electrolytes. FT-IR results confirmed the silane functionalization of SBA-15. Ionic conductivity and lithium ion transference number of the composite polymer electrolytes were found to simultaneously reach a high value of 5 wt.% silane-functionalized SBA-15 introduced in the matrix. It may be due to the combination effects of the unique structure of SBA-15 (i.e., ultra-high specific surface area and large pore size), the particularly functionalized surface of SBA-15 to promote fast ion transfer, and the good dispersion and compatibility of silane-functionalized SBA-15 in the composite polymer electrolytes. The results suggest an alternative way to improve the performance of solid polymer electrolytes.     

Optical oxygen sensing materials based on a novel dirhenium(I) complex assembled in mesoporous silica

A new dirhenium(I) complex fac-[{Re(CO)₃(4,7-dinonadecyl-1,10-phenanthro -line)}₂ (4,4′-bipyridyl)] (trifluoromethanesulfonate)₂ (denoted as D-Re(I) ) is assembled in MCM-41 and SBA-15 type mesoporous silica support. The emission peaks of D-Re(I) in D-Re(I)/MCM-41 and D-Re(I)/SBA-15 are observed at 522 and 517 nm, respectively. Their long excited lifetimes, which are of the order of microseconds, indicate the presence of phosphorescence emission arising from the metal to ligand charge-transfer (MLCT) transition. The luminescence intensities of D-Re(I)/MCM-41 and D-Re(I)/SBA-15 decrease remarkably with increase in the oxygen concentration, meaning that they can be used as optical oxygen sensing materials based on luminescence quenching. The ratios I₀/I₁₀₀ of D-Re(I)/MCM-41 and D-Re(I)/SBA-15 are estimated to be 5.6 and 20.1, respectively. The obtained Stern-Volmer oxygen quenching plots of the mesoporous sensing materials could be fitted well to the two-site Demas model and Lehrer model.     

介孔二氧化硅基导电聚合物复合材料热导率的实验研究

本文首先制备并表征了介孔二氧化硅SBA-15、 填充导电聚合物的复合材料PANI/SBA-15和复合材料PPy/SBA-15, 并建立双流计实验台开展了材料压片情况下的热导率研究. 在测量得到复合材料热导率的基础上, 引入当量孔径, 结合测量孔径对 PANI/SBA-15和PPy/SBA-15复合材料热导率随填充量的变化进行了定性分析. 分析表明: PANI/SBA-15和PPy/SBA-15复合材料的热导率比基材SBA-15的热导率大得多; 在相同的测量孔径和当量孔径情况下, PANI/SBA-15复合材料的热导率比PPy/SBA-15复合材料的热导率大; 导电聚合物填充到复合材料孔道内和孔道外都有助于热导率的提高, 填充到孔道内比填充到孔道外对热导率提高的贡献更大.     

Synthesis and characterization of MnWO4 nanoparticles encapsulated in mesoporous silica SBA-15 by fast microwave-assisted method

The MnWO₄ nanoparticles encapsulated in mesoporous silica (MnWO₄/SBA-15) was successfully synthesized by a fast microwave-assisted method. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen absorption–desorption isotherm, and Fourier transform infrared spectroscopy (FTIR). Our results showed that the MnWO₄/SBA-15 nanocomposites have the ordered hexagonal meso-structure of SBA-15, indicating MnWO₄ nanoparticles were successfully distributed into the channels of SBA-15. The size of MnWO₄ nanoparticles in SBA-15 is significantly smaller than the size of MnWO₄ nanoparticles prepared without SBA-15, indicating that the MnWO₄/SBA15 nanocomposites would be very promising for improving photocatalytic activity of MnWO₄ nanoparticles.     

发射FTIR光谱技术在聚合物电解质导电机制研究中的应用

运用发射FTIR光谱技术,实时监测SBA-15掺杂制备的复合聚合物电解质随温度升高其结晶状态变化的规律,结合电化学和SEM研究结果分析了无机填料对离子电导率的影响,并初步提出离子导电增强的机制。文章将为发射FTIR光谱技术应用于锂电池研究进行了探索。     

A Molecular Dynamics study of the influence of side-chain length and spacing on lithium mobility in non-crystalline LiPF6·PEOx; x = 10 and 30

Molecular Dynamics (MD) simulation techniques have been used to investigate systematically how the length and spacing of poly(ethylene oxide) (PEO) side-chains along a PEO backbone influence ion mobility for two different salt concentrations. This is of fundamental relevance to the design of new polymer electrolytes for battery applications. The salt used has been LiPF₆ in concentrations corresponding to Li:EO ratios of 1:30 and 1:10. The MD box contained PEO backbones of 89–343 EO units to which 3, 6, 7, 8, 9 and 15 EO unit side-chains were added. The selected spacings along the backbone between the PEO side-chains attachment points were 5, 10, 15, 20 and 50 EO units. The backbone and all side-chains were methoxy end-capped, and the simulations were all made at 293 K. Ion mobilities have been estimated from the variation of mean-square-displacement with time, and have been analysed in relation to chain dynamics, cross-linking and ion pairing. Comparisons are also made with the results of simulated PEO systems without side-chains and/or without salt. It is found that, at a higher concentration, many short side-chains give the highest ion mobility, while the mobility is highest for side-chain lengths of 7–9 EO units at the lower concentration.     

Preparation and characterization of carbamoylphosphonate(CMPO) silane grafted on various mesoporous silicas

The carbamoylphosphosphonate silane (CMPO analogue; 2-(diphenylphosphoryl)-N-(3-(triethoxysilyl)propyl) acetamide) modified mesoporous silica was prepared via a post-synthesis grafting method for the effective purification of rare earth elements. The guest CMPO analogue was synthesized by direct coupling reaction of 2-(diphenylphosphoryl) acetic acid and 3-(triethoxysilyl)propan-1-amine. Various mesoporous silicates such as MCM-41, SBA-15, or amorphous silica nanoparticles were adopted as host materials. The resulting surface-modified mesoporous materials were characterized with respect to their structural integrity, surface area, and pore size and the concentration of the CMPO silane species. These CMPO functionalized periodic mesostructured silicates offer the potential of applications as catalysts, sensors, or environmental sorbents.     

Layer by layer growth of silver chloride nanoparticle within the pore channels of SBA-15/SO3H mesoporous silica (AgClNP/SBA-15/SO3K): Synthesis,characterization and antibacterial properties

The growth of silver chloride nanoparticles within the pore channels of functionalized SBA-15 mesoporous was achieved by sequential dipping steps in alternating bath of potassium chloride and silver nitrate under ultrasound irradiation at pH=9. The effects of sequential dipping steps in growth of the AgCl nanoparticles have been studied. The growth and formation of AgCl nanoparticles inside the sulfonated SBA-15 were characterized by X-ray diffraction (XRD), Fourier transformation infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Antibacterial activity of the synthesized materials was investigated against Escherichia coli (E.coli) using the conventional diffusion-disc method. The materials showed high antibacterial activity.     

Characterization and adsorptive application of ordered mesoporous silicas

The adsorption behaviour of the n-octane/ethanol binary liquid mixture has been studied on ordered mesoporous silica materials. Adsorption excesses on SBA-15, SBA-16 and MCM-48 solids are measured and described by mathematical functions. The experimental adsorption excess isotherms are presented and discussed. The mesoporous silicas used for liquid-adsorption experiments are characterized by nitrogen adsorption before and after liquid adsorption by the powder X-ray diffraction (XRD) and by the sample controlled thermal analysis (SCTA).     

Naproxen drug delivery using periodic mesoporous silica SBA-15

In this paper, we present the release of naproxen from hexagonal periodic mesoporous silica SBA-15, which serves as a drug delivery system. Naproxen, the well-known nonsteroidal anti-inflammatory drug (NSAID), was loaded into the pores of SBA-15 silica modified with aminopropyl groups. The physicochemical properties of the modified sample (A-SBA-15/napro) were compared with the unmodified SBA-15 mesoporous silica loaded with the drug (SBA-15/napro). The kinetic of the naproxen release into the physiological solution was studied. The released amount of naproxen represented 90.7% from the unmodified SBA-15 in 72 h, while from the sample A-SBA-15/napro the released amount represented about 80.9%. The prepared materials were characterized by nitrogen adsorption/desorption, Small angle X-ray scattering (SAXS), Fourier-transform infrared spectroscopy (FT-IR) and the thermoanalytical methods (TG/DTA). Thin layer chromatography (TLC) was used for quantitative determination of the released naproxen.     

Functionalized SBA-15 materials for bilirubin adsorption

To investigate the driving force for bilirubin adsorption on mesoporous materials, a comparative study was carried out between pure siliceous SBA-15 and three functionalized SBA-15 mesoporous materials: CH₃-SBA-15 (MS), NH₂-SBA-15 (AS), and CH₃/NH₂-SBA-15 (AMS) that were synthesized by one-pot method. The obtained materials exhibited large surface areas (553-810 m²/g) and pore size (6.6-7.1 nm) demonstrated by XRD and N₂-ad/desorption analysis. The SEM images showed that the materials had similar fiberlike morphology. The functionalization extent was calculated according to ²⁹Si MAS NMR spectra and it was close to the designed value (10%). The synthesized mesoporous materials were used as bilirubin adsorbents and showed higher bilirubin adsorption capacities than the commercial active carbon. The adsorption capacities of amine functionalized samples AMS and AS were larger than those of pure siliceous SBA-15 and MS, indicating that electrostatic interaction was the dominant driving force for bilirubin adsorption on mesoporous materials. Increasing the ionic strength of bilirubin solution by adding NaCl would decrease the bilirubin adsorption capacity of mesoporous material, which further demonstrated that the electrostatic interaction was the dominant driving force for bilirubin adsorption. In addition, the hydrophobic interaction provided by methyl groups could promote the bilirubin adsorption.     

Characterization of the synthesis and reactivity behavior of nanostructured vanadia model catalysts using XPS and vibrational spectroscopy

Nanostructured vanadia model catalysts, i.e., highly dispersed vanadium oxide supported on mesoporous silica SBA-15 (VO_x/SBA-15), were prepared. The mechanism for the synthesis of VO_x/SBA-15 was elucidated by detailed characterization of the individual synthesis steps using XPS and vibrational spectroscopy. The resulting surface vanadium oxide species (0-2.3 V/nm²), grafted on the inner pores of the SBA-15 silica matrix, consists of tetrahedrally coordinated vanadia as inferred from UV-VIS- and Raman spectroscopy. The prepared vanadia model catalysts were tested in the partial oxidation of methanol to formaldehyde yielding high formaldehyde selectivities of 94% at 350 °C. XPS and Raman analysis of the catalyst after reaction reveal the presence of methoxy as well as a significant amount of carbonaceous species on the surface. Our results demonstrate that a detailed understanding of partial oxidation reactions requires the combination of complementary spectroscopic techniques ultimately within one experimental set-up.     

Surface structural,morphological, and catalytic studies of homogeneously dispersed anisotropic Ag nanostructures within mesoporous silica

Highly dispersed anisotropic Ag nanostructures were synthesized within the channels of 3-aminopropyltrimethoxysilane (APTMS)-modified mesoporous SBA-15 for catalyzing the reduction of p-dinitrobenzene, p-nitrophenol, and p-nitroacetophenone, respectively. A green templating process without involving any reducing agent, by varying the amount (1–10 wt.%) of Ag loading followed by calcination at 350 °C under H₂ led to change in the morphology of Ag nanoparticles from nanospheres (~7–8 nm) to nanorods (aspect ratio ~12–30 nm) without any deformation in mesoporous sieves. In comparison to white bare SBA-15, gray-colored samples were formed with Ag impregnation exhibiting absorption bands at 484 and 840 nm indicating the formation of anisotropic Ag nanostructures within mesoporous matrix. TEM and FE-SEM micrographs confirmed the presence of evenly dispersed Ag nanostructures within as well as on the surface of mesoporous matrix. AFM studies indicated a small decrease in the average roughness of SBA-15 from 20.59 to 19.21 nm for 4 wt.% Ag/m-SBA-15, illustrating the encapsulation of majority of Ag nanoparticles in the siliceous matrix and presence of small amount of Ag nanoparticles on the mesoporous support. Moreover, due to plugging of mesopores with Ag, a significant decrease in surface area from 680 m²/g of SBA-15 to 385 m²/g was observed. The Ag-impregnated SBA-15 catalyst displayed superior catalytic activity than did bare SBA-15 with 4 wt.% Ag-loaded catalyst exhibiting optimum activity for selective reduction of p-nitrophenol to p-aminophenol (100 %), p-nitroacetophenone to p-aminoacetophenone (100 %), and p-dinitrobenzene to p-nitroaniline (87 %), with a small amount of p-phenylenediamine formation.

Open image in new window

Graphical abstract This paper demonstrates the spontaneous formation of uniformly dispersed Ag nanospecies of various morphologies (nanospheres, size ~7–8 nm and nanorods, aspect ratio ~12–30 nm), both within as well as on the surface of the mesoporous SBA-15, as a function of increased Ag loading. Surface structural and other physiochemical properties of Ag/m-SBA-15 nanocomposites were considerably influenced w.r.t change in Ag loading. Ag/m-SBA-15 nanocomposites with 4 wt.% Ag loading exhibited the highest selectivity (87 %) for the selective reduction of p-dinitrobenzene to p-nitroaniline and 100 % selectivity for p-nitrophenol to p-aminophenol and p-nitroacetophenone to p-aminoacetophenone, respectively.

     

High-pressure conductivity studies of blends of poly(p-phenylene)s with oxyethylene side-chains and lithium salts

High-pressure electrical conductivity studies have been carried out with poly(p-phenylene)s with oxyethylene side-chains (PPP(EO)_x/y), which were blended with LiCF₃SO₃. Measurements were performed at pressures up to 280 MPa and at different temperatures. The influences of salt concentration, side-chain length, temperature, and plasticizer content on the relative conductance and activation volume are investigated. The temperature-dependent conductivity of the sample is non-Arrhenius and exhibits Williams–Landel–Ferry (WLF) behavior. The logarithm of relative conductance for PPP(EO)_x/y/LiCF₃SO₃ decreases almost linearly with increasing pressure but increases with salt concentration and side-chain length. As temperature increases, the activation volume becomes smaller but remains positive for PPP(EO)_x/y/LiCF₃SO₃. At higher salt concentrations and longer side-chain lengths, a smaller activation volume for the ion motion is found. These results can be interpreted such that PPP(EO)_x/y/LiCF₃SO₃ behaves like a true polymer electrolyte where ion transport is mediated by segmental motions of the EO side-chains. The addition of tetraethylene glycol dimethyl ether (TEGDME) as a plasticizer increases the activation volume but reduces the conductance.     

Synthesis of conjugated polymers for application in light-emitting diodes (PLEDs)

In the field of electroluminescent organic materials, conjugated polymers have attracted much attention over recent years owing to their versatile synthesis, their relative ease of processing and the possibility of establishing predictive structure–function relationships between chemical structures and optical properties. This review article highlights the advances made in the synthesis of conjugated polymers for use in light-emitting devices (LEDs) covering the last two years. Research efforts were largely directed towards the improvement of the synthesis of monomers and polymers involving classical polymer structures such as poly( p -phenylene vinylene)s (PPVs), poly( p -phenylene)s (PPPs), poly(2,7-fluorene)s (PFs), or poly(2,5-thienylene)s (PTs). Control of the color of emission by modulation of the effective conjugation length, improving balanced charge injection and transport properties by introduction of electron-donating or -withdrawing moieties directly into the polymer backbone or enhancement of the emission efficiency by attempts to influence film morphology are some examples of recent research directions. All these investigations contributed to a significantly better understanding of the chemical and physical processes spanning topics from the manufacturing process to the operation of LEDs and leading to the announcement of the first commercial products. In addition to the classical π -conjugated polymers a few examples of rather unusual structures have also emerged.     

Structure and Morphology of SBA-15 Thin Films on Different Substrates

Well-ordered hexagonal mesoporous silica thin films, SBA-15 type, were synthesized with Pluronic P123 and tetraethyl orthosilicate in a diluted ethanol-hydrochloric acid solution. Films deposited on a broad range of distinct substrates by a sol-gel dip-coating method resulted in transparent and adherent samples. Transmission electron microscopy images revealed, predominantly, well-ordered regions of hexagonal arrays of cylindrical mesopores parallel to the substrate. X-ray reflectivity showed similar lattice parameters for all analyzed films, with a (h00) preferred orientation. The films presented diverse shrinkage susceptibilities, which were tested after different polymer removal procedures. Calcined films have 342 m²/g surface area, 0.130 cm³/g pore volume, and 6.8 nm pore diameter. The wetting characteristics of the substrates in water and alcoholic solutions were evaluated. The films showed different structural properties, mostly related to the mean surface roughness of the substrates and to the drying process.     

Studies of intrawall porosity in the hexagonally ordered mesostructures of SBA-15 by small angle X-ray scattering and nitrogen adsorption

Ordered mesoporous silicas (OMSs) such as SBA-15 (p6mm symmetry group) synthesized in the presence of block copolymers containing poly(ethylene oxide) blocks possess irregular complementary pores in the walls of ordered mesopores. The X-ray scattering caused by this complementary porosity contributes to the background of the SAXS patterns. This work shows the possibility of using the SAXS data for the study of intrawall channels interconnecting ordered cylinders in SBA-15. The proposed SAXS analysis was tested by using a series of SBA-15 samples obtained at different temperatures of hydrothermal treatment (from 60 to 180 °C). The structural modelling of the SAXS patterns recorded for a series of SBA-15 samples was performed by using the continuous density function (CDF) technique in combination with the derivative difference minimization (DDM) method of full-profile refinement. This method is well suited for extraction of the background curves from the SAXS patterns. The resulting smooth background curves were analyzed by the well-known method in the SAXS theory used for evaluation of heterogeneity distributions, which in this case characterize the intrawall complementary porosity. A relatively good agreement has been observed between the data obtained by SAXS and nitrogen adsorption analysis. The SAXS analysis is sufficiently sensitive for examination of heterogeneous microporosity in SBA-15 materials. The average diameter of intrawall pores for the SBA-15 sample obtained at 60 °C was only about 1.4 nm. However, this diameter increased with the increasing temperature of hydrothermal treatment; namely, it was 1.5, 1.8, 2.6, 2.6, 3.5 and 5.2 nm for the SBA-15 samples hydrothermally treated at 80, 100, 120, 140, 160 and 180 °C, respectively.     

非共轭聚合物PPV衍生物中烷氧基因对发光性质的影响

研究了3种非共轭PPV聚合物以及3种共轭PPV衍生物的吸收谱和发光光谱的特性。非共轭PPV聚合物上的侧链烷氧基团有着很强的供电子能力，对调节非共轭聚合物能带带隙有重要的影响，且离主链较近的碳原子对能带结构也有一定的影响。但当侧链上的碳原子数量很大，从7个小时一直变化到10小时，共轭PPV衍生物的吸收光谱和发光光谱变化较少，表明对能带结构影响小。