Na1−xLixNbO3 ceramics studied by X-ray diffraction, dielectric, pyroelectric, piezoelectric and Raman spectroscopy

Na_1−xLi_xNbO₃ ceramics with composition 0.05≤x≤0.30 were prepared by solid-state reaction method and sintered in the temperature range 1100-1150 °C. These ceramics were characterised by X-ray diffraction as well as dielectric permittivity measurements and Raman spectroscopy. Dielectric properties of ceramics belonging to the whole composition domain were investigated in a broad range of temperatures from 300 to 750 K and frequencies from 0.1 to 200 kHz. The Rietveld refinement powder X-ray diffraction analysis showed that these ceramics have a single phase of perovskite structure with orthorhombic symmetry for x≤0.15 and two phases coexistence of rhombohedral and orthorhombic above x=0.20. The evolution of the permittivity as a function of temperature and frequency showed that these ceramics Na_1−xLi_xNbO₃ with composition 0.05≤x≤0.15 present the classical ferroelectric character and the phase transition temperature T_C increases as x content increases. The polarisation state was checked by pyroelectric and piezoelectric measurements. For x=0.05, the piezoelectric coefficient d₃₁ is of 2pC/N. The evolution of the Raman spectra was studied as a function of temperatures and compositions. The results of the Raman spectroscopy study confirm our dielectric measurements, and they indicate clearly the transition from the polar ferroelectric phase to the non-polar paraelectric one.     

The influence of microscopic parameters on the ionic conductivity of SrBi2(Nb1−xVx)2O9−δ(0≤x≤0.3) ceramics

Layered SrBi₂(Nb_1−xV_x)₂O_9−δ (SBVN) ceramics with x lying in the range 0-0.3 (30 mol%) were fabricated by the conventional sintering technique. The microstructural studies confirmed the truncating effect of V₂O₅ on the abnormal platy growth of SBN grains. The electrical conductivity studies were centred in the 573-823 K as the Curie temperature lies in this range. The concentration of mobile charge carriers (n), the diffusion constant (D₀) and the mean free path (a) were calculated by using Rice and Roth formalism. The conductivity parameters such as ion-hopping rate (ω_p) and the charge carrier concentration (K′) term have been calculated using Almond and West formalism. The aforementioned microscopic parameters were found to be V₂O₅ content dependent on SrBi₂(Nb_1−xV_x)₂O_9−δ ceramics.     

Annealing of thin Zr films on Si1−xGex(0≤x≤1): X-ray diffraction and Raman studies

X-ray diffraction experiments have been combined with Raman scattering and transmission electron microscopy data to analyze the result of rapid thermal annealing (RTA) applied to Zr films, 16 or 80 nm thick, sputtered on Si_1−xGe_x epilayers (0≤x≤1). The C49 Zr(Si_1−xGe_x)₂ is the unique phase obtained after complete reaction. ZrSi_1−xGe_x is formed as an intermediate phase. The C49 formation temperature T_f is lowered by the addition of Ge in the structure. Above a critical Ge composition close to x=0.33, a film microstructure change was observed. Films annealed at temperatures close to T_f are continuous and relaxed. Annealing at T>T_f leads to discontinuous films: surface roughening resulting from SiGe diffusion at film grain boundaries occurred. Grains are ultimately partially embedded in a SiGe matrix. A reduction in the lattice parameters as well as a shift of Raman lines are observed as T exceeds T_f. Both Ge non-stoichiometry and residual stress have been considered as possible origins for these changes. However, as Ge segregation has never been detected, even by using very efficient techniques, it is thought that the changes originate merely from residual stress. The C49 grains are expected to be strained under the SiGe matrix effect and shift of the Raman lines would indicate the stress is compressive. Some simple evaluations of the stress values indicate that it varies between −0.3 and −3.5 GPa for 0≤x≤1 which corresponds to a strain in the range (−0.11, −1.15%). X-ray and Raman determinations are in good agreement.     

Temperature Raman scattering study of CaAl0.5Ta0.5O3 perovskite crystal

Temperature Raman scattering studies were performed for CaAl_0.5Ta_0.5O₃ crystal. This material features NaCl-type ordering of Al³⁺ and Ta⁵⁺ ions at the B-site superimposed onto b⁻b⁻c⁺ octahedral tilting. Because of the existing twin-related domains in crystal structure, the micro-Raman measurements were carried out at room temperature. Some differences in Raman spectra obtained using macro- and micro-Raman system were revealed. Most of the Raman modes show monotonous red-shift with the increase in temperature. Only the cubic-like fully symmetric A_1g mode slightly increases its frequency with an increase in temperature. There are no uncontinuous changes of mode frequency in the temperature range studied. It indicates the stable character of static distortions of crystal structure relying on changes of octahedra tilt angle.     

Strength of the phonon-coupling mode in La2−xSrxCuO4, Bi2Sr2CaCu2O8+x and Y Ba2Cu3O6+x composites along the nodal direction

Despite the intensive efforts for determining the mechanism that causes high-temperature superconductivity in copper oxide materials, no consensus on the pairing mechanism has been reached. Recent advances in high resolution angle-resolved photoemission spectroscopies have suggested that a sizeable electron-phonon coupling exists as the principal cause for kinks in the dispersion relations (energy versus wave vector) of the electronic states. Here, we report on a systematic study about the influence of the electron-phonon coupling parameter “λ” in the electronic quasiparticle dispersions of a wide family of CuO composites. In particular, the influence of the doping level in the cuprate families, La_2−xSr_xCuO₄, Bi₂Sr₂CaCu₂O_8+x and Y Ba₂Cu₃O_6+x over the dressing of the charge carriers, i.e., on the enhancement of the effective mass and the strength of the coupling mode for the nodal direction of the Fermi surface has been analyzed. Universal effects as the nodal kinks at low energies are theoretically reproduced, emphasizing the necessary distinction between the general electron mass-enhancement parameter λ^∗ and the conventional electron-phonon coupling parameter λ. Our analysis shows a remarkable agreement between theory and experiment for different samples and at different doping levels. In fact, in LSCO family, the coupling constant λ calculated consistently with the nodal kink dispersions, reproduces the observed critical temperatures T_c, the gap ratio 2Δ₀/k_BT_c, and other parameters which have been studied from a wide set of natural and empirical equations which have been used along the last decades. It will be concluded that the strong renormalisation of the band structure can be explained in terms of the phonon coupling mode, and must therefore be included in any microscopic theory of superconductivity, even for those materials in which the contribution to the pair formation can be less dominant. Nevertheless, in more anisotropic structures, simulations reducing the Coulomb effects to encourage the phonon mechanism reveal as seems unavoidable to consider additional coupling modes that justify the higher critical temperatures observed in BSCCO and YBCO samples.     

High pressure Raman spectroscopic study of spinel MgCr2O4

An in situ Raman spectroscopic study was conducted to investigate the pressure induced phase transformation of MgCr₂O₄ spinel up to pressures of 76.4 GPa. Results indicate that MgCr₂O₄ spinel undergoes a phase transformation to the CaFe₂O₄ (or CaTi₂O₄) structure at 14.2 GPa, and this transition is complete at 30.1 GPa. The coexistence of two phases over a wide range of pressure implies a sluggish transition mechanism. No evidence was observed to support the pressure-induced dissociation of MgCr₂O₄ at 5.7-18.8 GPa, predicted by the theoretical simulation. This high pressure MgCr₂O₄ polymorphism remains stable upon release of pressure, but at ambient conditions, it transforms to the spinel phase.     

Synthesis and characterization of the xZnO-(1−x)α-Fe2O3 nanoparticles system

The xZnO-(1−x)α-Fe₂O₃ nanoparticles system has been obtained by mechanochemical activation for x=0.1, 0.3 and 0.5 and for ball milling times ranging from 2 to 24 h. Structural and morphological characteristics of the zinc-doped hematite system were investigated by X-ray diffraction (XRD) and Mössbauer spectroscopy. The Rietveld structure of the XRD spectra yielded the dependence of the particle size and lattice constant on the amount x of Zn substitutions and as function of the ball milling time. The x=0.1 XRD spectra are consistent with line broadening as Zn substitutes Fe in the hematite structure and the appearance of the zinc ferrite phase at milling times longer than 4 h. Similar results were obtained for x=0.3, while for x=0.5 the zinc ferrite phase occurred at 2 h and entirely dominated the spectrum at 24 h milling time. The Mössbauer spectra corresponding to x=0.1 exhibit line broadening as the ball milling time increases, in agreement with the model of local atomic environment. Because of this reason, the Mössbauer spectrum for 12 h of milling had to be fitted with two sextets. For x=0.3 and 12 milling hours, the Mössbauer spectrum reveals the occurrence of a quadrupole-split doublet, with the hyperfine parameters characteristic to zinc ferrite, ZnFe₂O₄. This doublet clearly dominates the Mössbauer spectrum for x=0.5 and 24 h of milling, demonstrating that the entire system of nanoparticles consists finally of zinc ferrite. As ZnO is not soluble in hematite in the bulk form, the present study clearly demonstrates that the solubility limits of an immiscible system can be extended beyond the limits in the solid state by mechanochemical activation. Moreover, this synthesis route allowed us to reach nanometric particle dimensions, which would make the materials very important for gas sensing applications.     

Phase transformation behavior and dielectric characteristics of BaTi1−x(Al1/2Nb1/2)xO3 (0.01≤x≤0.40) ceramics

Microstructure, phase transformation behavior and dielectric properties of BaTi_1−x(Al_1/2Nb_1/2)_xO₃ (0.01≤x≤0.40) ceramics were investigated. A high level of (Al_1/2Nb_1/2)⁴⁺ substitution for Ti⁴⁺ ions was not conducive to the stability of the perovskite structure and resulted in the formation of BaAl₂O₄. As x was increased, lattice constants and unit cell volume decreased, reached a minimum at x=0.10 and then increased. The BaTi_1−x(Al_1/2Nb_1/2)_xO₃ ceramics at room temperature experienced a transformation from ferroelectric to paraelectric phase with increasing (Al_1/2Nb_1/2)⁴⁺ concentration. Meanwhile, permittivity of the BaTi_1−x(Al_1/2Nb_1/2)_xO₃ ceramics was markedly reduced, while Q value was slightly increased. Frequency dispersion of dielectric peak was obviously increased as x was increased from 0.01 to 0.10. It is of great interest that a dielectric abnormity represented by a broad dielectric peak at 200-400 K was observed for the composition with x=0.40.     

On the origin of irreproducible behaviour of Na1−xLixNbO3 solid solutions

The irreproducibility of electrical properties of Na_0.88Li_0.12NbO₃ solid solution on thermal cycling reported by M.A.L. Nobre and S. Lanfredi is explained by gradual decomposition of the supersaturated solid solution below ca. 800 °C.     

Influence of vapor transport equilibration on Raman spectra of Er:LiNbO3 crystals

Raman spectra of as-grown and vapor transport equilibration (VTE) treated Er:LiNbO₃ crystals, which have different cut orientations (X-cut and Z-cut), different Er-doping levels (Er:(0.2, 0.4 and 2.0 mol%)LiNbO₃) and different VTE durations (80, 120, 150 and 180 h), were recorded at room temperature in the wavenumber range 50-1000 cm⁻¹ by using backward scattering geometry. The spectra were attributed on the basis of their spectral features and the previous experimental work and the most recent theoretical progress in lattice dynamics on pure LiNbO₃. In comparison with the pure crystal the most remarkable effect of Er-doping on the Raman spectrum is observed for the E(TO₉) mode. It does not appear at 610 cm⁻¹ as the pure crystal, but locates at 633 cm⁻¹. In addition, the doping also results in the lowering of the Raman phonon frequency, the broadening of the Raman linewidth and the changes of the relative Raman intensity of some peaks. The VTE treatment results in the narrowing of the linewidth, the recovery of the lowered phonon frequency and the further changes of relative Raman intensity. The narrowing of Raman linewidth indicates that the VTE processing has brought these crystals closer to stoichiometric composition. The VTE treatment has induced the formation of a precipitate ErNbO₄ in the high-doped Er(2.0%):LiNbO₃ crystals whether X- or Z-cut. For these precipitated crystals, besides above linewidth and phonon frequency features, they also display more significant Raman intensity changes compared with those not precipitated crystals. In addition, a slight mixing between A₁(TO) and E(TO) spectra is also observed for these precipitated crystals. Above doping and VTE effects on Raman spectra were quantitatively or qualitatively correlated with the characteristics of the crystal structure and phonon vibrational system.     

Properties of CuIn(SxSe1−x)2 polycrystalline thin films prepared by chemical spray pyrolysis

CuIn(S_xSe_1−x)₂ thin polycrystalline films were grown by the chemical spray pyrolysis method on the glass substrate at 280-400°C. The alloy composition in the film was studied with relation to that in the splay solution. Films were characterized by X-ray diffraction, optical absorption, Raman spectroscopy, resistivity and surface morphology. The CuInSe₂-rich alloy films grown at high substrate temperature had chalcopyrite structure, while, the CuInS₂-rich films grown at low substrate temperature exhibited sphalerite structure. Optical-gap energies were smaller than that of the bulk crystal by 0.1-0.2 eV for CuInS₂-rich films. Raman spectra exhibited both CuInSe₂-like and CuInS₂-like A₁ modes, and their relative changed systematically with alloy composition.     

Temperature-dependent Fe Mössbauer spectroscopy and local structure of the mullite-type Bi2(FexGa1−x)4O9 (0.1≤x≤1) solid solution

The Bi₂(Fe_xGa_1−x)₄O₉ oxide solid solution possessing a mullite-type structure has been investigated by ⁵⁷Fe Mössbauer spectroscopy in dependence of composition (0.1≤x≤1) and temperature (293≤T/K≤1073). The spectra have been fitted with two doublets for tetrahedrally and octahedrally coordinated high-spin Fe³⁺ ions, respectively. The experimental areas of the subspectra were used to determine the distribution of iron on the two inequivalent structural sites. The fraction of iron cations occupying the octahedral site is found to increase with decreasing Fe content and the cation distribution is almost independent of temperature. The unusual temperature dependence of the quadrupolar splitting, QS, observed for the octahedral site with dQS/dT>0 is discussed in connexion with structural data for Bi₂Fe₄O₉. The temperature dependence of Mössbauer isomer shifts and signal intensities is examined in the context of local vibrational properties of iron on the two inequivalent sites of the mullite-type lattice structure.     

Phase diagram for stripes in YBa2Cu3O6+x superconductors

Neutron scattering has been used to measure the charge and spin structure in the YBa₂Cu₃O_6+x superconductors. Incommensurate static charge ordering is found at low doping levels while only charge fluctuations are found at higher doping. The spin structure is complex with both a commensurate resonance and incommensurate structure observed at low temperatures. The scattering results are used to construct a phase diagram for stripes in the YBa₂Cu₃O_6+x system.     

Magnetic properties and magnetic structures of Sr3−xCaxRu2O7

We have measured magnetization curves and powder neutron diffraction of double-layered Ruddlesden-Popper type ruthenate Sr_3−xCa_xRu₂O₇ (x=1.5, 2.0 and 3.0). The field dependence of the magnetization revealed that the transition field of metamagnetic transition along the b-axis shifted to lower fields and that the transition became broad with increasing Sr content. The slope of the magnetization curve also increased with increasing Sr content below the metamagnetic transition. These results indicate that an itinerant component is partly introduced by the Sr substitution. From the magnetic reflection, on cooling below T_N, an additional reflection was observed at (0 0 1) for each x, and the amplitude increased with decreasing temperature. The observed diffraction patterns are very similar to those of Ca₃Ru₂O₇. We conclude that the magnetic structure of the antiferromagnetic ordered phase is basically the same structure with that of Ca₃Ru₂O₇.     

Electroresistance effect in La1−xCaxMnO3 (0<x<1) ceramics

Electroresistance (ER) effects were investigated for a full series of manganite ceramics La_1−xCa_xMnO₃ (0<x<1), synthesized by solid state reaction. The results indicate that while the ER effects are large only in the presence of electrically active, high E-field boundaries, the equilibrium or metastable electronic-magnetic states in the adjoining domains are also significant, as a large ER occurs only at x=0.51 and x=0.17; those compositions are both near a two-phase coexistence region, i.e. close to a compositional regime where equilibrium insulating/metallic phase domains and interfaces would occur spontaneously.     

Magnetoelectric characterization of xNi0.75Co0.25Fe2O4-(1−x)BiFeO3 nanocomposites

Magnetoelectric (ME) nanocomposites containing Ni_0.75Co_0.25Fe₂O₄-BiFeO₃ phases were prepared by citrate sol-gel process. X-ray diffraction (XRD) analysis showed phase formation of xNi_0.75Co_0.25Fe₂O₄-(1−x)BiFeO₃ (x=0.1, 0.2, 0.3 and 0.4) composites on heating at 700 °C. Transmission electron microscopy revealed the formation of powders of nano order size and the crystal size was found to vary from 30 to 85 nm. Dispersion in dielectric constant (ε) and dielectric loss (tan δ) in the low-frequency range have been observed. It is seen that nanocomposites exhibit strong magnetic properties and a large ME effect. On increasing Ni_0.75Co_0.25Fe₂O₄ contents in the nanocomposites, the saturation magnetization (M_S) and coercivity (H_C) increased after annealing at 700 °C. The large ME output in the nanocomposites exhibits strong dependence on magnetic bias and magnetic field frequency. The large value of ME output can be attributed to small grain size of ferrite phase of nanocomposite being prepared by citrate precursor process.     

Phonon spectra of stoichiometric rare-earth compound of EuGa2S4

Investigations of EuGa₂S₄ have been done on the photoluminescence (PL) related to the transition between 4f⁶5d and 4f⁷ configuration of the Eu²⁺ ion and its excitation (PLE) spectra, Raman scattering and infrared absorption. The energies of phonons coupled to the ground and the excited states of the transition are analyzed to be 34 and 19 meV from the shapes of the PL and PLE bands, respectively. The former corresponds to the energy of the Raman line showing the highest intensity. The latter is close to the value obtained from analysis of the temperature dependence of the half width of the PL band. These correspondences indicate that the relevant emission of EuGa₂S₄ surely has phonon-terminated character.     

Electrical and electrochemical properties of molten salt-synthesized Li4Ti5−xSnxO12 (x=0.0, 0.05 and 0.1) as anodes for Li-ion batteries

Submicron-sized polyhedral Li₄Ti_5−xSn_xO₁₂ (x=0.0, 0.05, and 0.1) materials were successfully prepared by a single-step molten salt method. The structural, morphological, transport and electrochemical properties of the Li₄Ti_5−xSn_xO₁₂ were studied. X-ray diffraction patterns showed the formation of a cubic structure with a lattice constant of 8.31 Å, and the addition of dopants follows Vegard's law. Furthermore, FT-IR spectra revealed symmetric stretching vibrations of octahedral groups of MO₆ lattice in Li₄Ti₅O₁₂. The formation of polyhedral submicron Li₄Ti_5−xSn_xO₁₂ particles was inferred from FE-SEM images, and a particle size reduction was observed for Sn-doped Li₄Ti₅O₁₂. The chemical composition of Ti, O and Sn was verified by EDAX. The DC electrical conductivity was found to increase with increasing temperature, and a maximum conductivity of 8.96×10⁻⁶ S cm⁻¹ was observed at 200 °C for Li₄Ti₅O₁₂. The galvanostatic charge–discharge behavior indicates that the Sn-doped Li₄Ti₅O₁₂ could be used as an anode for Li-ion batteries due to its enhanced electrochemical properties.     

Increase of Tc in the 1:2:3 superconductors YBCO and (CaxLa1−x)(LauBa1−u)2Cu3Oy after slow cooling or low temperature annealing

The well known phenomenon of the increase of T_c of YBCO after slow cooling or low temperature annealing without change of the oxygen content, was found also for the YBCO like tetragonal superconductors of (Ca_xLa_1−x)(La_uBa_1−u)₂Cu₃O_y (this compound has been previously denoted as CLBLCO, CLBCO or CaLaBaCuO). It has been observed at 150 and 100 °C for oxygen underdoped, optimally- and overdoped ceramics. The products retain their tetragonal unit cells. The possible reasons of this phenomenon are discussed.