Phase transitions in K3AlF6

Phase transitions in the elpasolite-type K₃AlF₆ complex fluoride were investigated using differential scanning calorimetry, electron diffraction and X-ray powder diffraction. Three phase transitions were identified with critical temperatures , and . The α-K₃AlF₆ phase is stable below T₁ and crystallizes in a monoclinic unit cell with a=18.8588(2)Å, b=34.0278(2)Å, c=18.9231(1)Å, β=90.453(1)° (a=2a_c−c_c, b=4b_c, c=a_c+2c_c; a_c, b_c, c_c—the basic lattice vectors of the face-centered cubic elpasolite structure) and space group I2/a or Ia. The intermediate β phase exists only in very narrow temperature interval between T₁ and T₂. The γ polymorph is stable in the T₂<T<T₃ temperature range and has an orthorhombic unit cell with a=36.1229(6)Å, b=17.1114(3)Å, c=12.0502(3)Å (a=3a_c−3c_c, b=2b_c, c=a_c+c_c) at 250 °C and space group Fddd. Above T₃ the cubic δ polymorph forms with a_c=8.5786(4)Å at 400 °C and space group . The similarity between the K₃AlF₆ and K₃MoO₃F₃ compounds is discussed.     

Greener fluorous chemistry: Convenient preparation of new types of ‘CF3-rich’ secondary alkyl mesylates and their use for the synthesis of azides, amines, imidazoles and imidazolium salts

2,2,2-Trifluoroethanol, 1,1,1,3,3,3-hexafluoro-2-propanol, and nonafluoro-tert-butyl alcohol were used as precursors for the preparation of the appropriate bis(polyfluoroalkoxymethyl)carbinols [(R_FHOCH₂)₂CHOH, 1a-c, R_FH = (a) CF₃CH₂, (b) (CF₃)₂CH, and (c) (CF₃)₃C] and the corresponding mesylates [(R_FHOCH₂)₂CHOSO₂CH₃, 2a-c]. This novel design paradigm is introduced to eliminate the persistence and bioaccumulation problems of fluorous chemistry, which are associated with the use of longer linear perfluoroalkyl groups (e.g. R_fn ≥ n-C₈F₁₇, n-C₇F₁₅). Secondary mesylates 2a,b and the primary tosylate [(CF₃)₃COCH₂CH₂OTs, 2d] displayed acceptable reactivity towards azide and imidazole nucleophiles to allow the syntheses of novel fluorous azides, which on hydrogenolysis with H₂/Pd-C offered fluorous amines [(R_FHOCH₂)₂CHNH₂, 8a,b], and 1-(polyfluoroalkyl)imidazoles (5a,b,d), respectively, while 2c showed no reactivity due to steric hindrance. The reaction of 8a,b with formaline, glyoxal and hydrochloric acid gave symmetrical 1,3-dialkylated imidazolium chlorides (9a,b), while 5a,b,d were effectively alkylated using n-C₈F₁₇(CH₂)₃I, methyl iodide, 2-bromoethanol, and 2d to yield the corresponding 1,3-dialkylimidazolium iodides, bromides, and tosylates (7aa-ec). Some physical properties of new compounds including mp, bp and solubility patterns were also analyzed; and the fluorophilicity values of 1a-c, and 2a-c were experimentally determined by GC and/or ¹⁹F NMR spectroscopy.     

Convenient syntheses of fluorous phenols of the formula HOC6H5−n((CH2)3(CF2)7CF3)n (n=1, 2) and the corresponding triarylphosphites

The aldehydic benzyl ethers PhCH₂OC₆H₄CHO (2; a/b = para/meta series) are readily available from the corresponding phenols and react with Wittig reagents derived from [Ph₃PCH₂CH₂R_f8]⁺I⁻ (R_f8=(CF₂)₇CF₃) to give PhCH₂OC₆H₄CHCHCH₂R_f8 (86-93%, Z major). Reactions with H₂ over Pd/C give the fluorous phenols HOC₆H₄(CH₂)₃R_f8(4a,b; 87-91%). Condensations with PCl₃ and NEt₃ (3.0:1.0:3.3 mol ratio) give the fluorous phosphites P[OC₆H₄(CH₂)₃R_f8]₃(5a,b; 92-94%), but traces of 4a,b are difficult to remove. The phthalate-based benzyl ethers PhCH₂OC₆H₃(COOR)₂ (7; ,5/3,4 OC₆H₃-3,n-(R)₂ series) are easily accessed and reduced with LiAlH₄ to the diols PhCH₂OC₆H₃(CH₂OH)₂(8c,d; 89-90%). Diol 8c and the Dess-Martin periodinane react to give the dialdehyde PhCH₂OC₆H₃(CHO)₂ (9c; 95%). This is elaborated by a sequence analogous to 2→4→5 to the fluorous phenol HOC₆H₃((CH₂)₃R_f8)₂ (11c; 97%/96%, two steps) and phosphite P[OC₆H₃((CH₂)₃R_f8)₂]₃ (12c, 92%), from which traces of 11c are difficult to remove. Diol 8d can be similarly elaborated to 11d, but the dialdehyde 9d is labile and the combined yield of the Dess-Martin/Wittig steps is 32%. The CF₃C₆F₁₁/toluene partition coefficients of 11c,d, and 12c (two pony tails; 70:30, 72:28, 92:8) are much higher than those of 4a and b (one pony tail; 12:88, 14:86).     

On the microstructure and symmetry of apparently hexagonal BaAl2O4

The P6₃ (a=2a_p, b=2b_p, c=c_p) crystal structure reported for BaAl₂O₄ at room temperature has been carefully re-investigated by a combined transmission electron microscopy and neutron powder diffraction study. It is shown that the poor fit of this P6₃ (a=2a_p, b=2b_p, c=c_p) structure model for BaAl₂O₄ to neutron powder diffraction data is primarily due to the failure to take into account coherent scattering between different domains related by enantiomorphic twinning of the P6₃22 parent sub-structure. Fast Fourier transformation of [0 0 1] lattice images from small localized real space regions (∼10 nm in diameter) are used to show that the P6₃ (a=2a_p, b=2b_p, c=c_p) crystal structure reported for BaAl₂O₄ is not correct on the local scale. The correct local symmetry of the very small nano-domains is most likely orthorhombic or monoclinic.     

Reactions of bis(alkynyl)silanes with HB(C6F5)2: Formation of boryl-substituted silacyclobutene derivatives

Treatment of R₂Si(CC-SiMe₃)₂ [1a (Me), 1b (Ph)] with HB(C₆F₅)₂ at low temperature (253 K (a), 273 K (b)) gives the -B(C₆F₅)₂ substituted silacyclobutene products (4a,b) under kinetic control. Upon warming to room temperature they disappear to form the thermodynamically favoured isomeric silole derivatives (2a,b). Similar treatment of Me₂Si(CC-R¹)₂ [5a (R¹ = Ph), 5b (R¹ = tert-butyl) with HB(C₆F₅)₂ at room temperature gave the stable -B(C₆F₅)₂ substituted silacyclobutene derivatives 6 and 7, respectively. Subsequent photolysis resulted in a Z- to E-isomerization of the substituted exocyclic CC double bonds in these products. The silacyclobutene derivative E-6 was characterized by an X-ray crystal structure analysis.     

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (Y=H (1a), Me (1b), MeO (1c)) can be prepared either by direct insertion of elemental Te across C_Rf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (Y=H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCl₂ (Y=H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a-c with SO₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂TeI₂ (Y=H (4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of 1a-c with KI, or alternatively, by the oxidative addition of iodine to 2a-c. The reaction of 2a-c with allyl bromide affords the diorganotellurium dibromides 1a-c, rather than the expected triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ¹³C and ¹²⁵Te NMR spectroscopy (solution and solid-state) and in case of 1c also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.     

Stereocontrolled conversion of some optically active (4S,5R)-dihydroisoxazoles into acyclic 3-acetamido-1,2-diols

Optically active (4S,5R)-dihydroisoxazoles 5a-c (90-91% ee) have been prepared by reaction of the epoxyketones 4a-c with hydroxylamine. Reduction of compounds 5a and 5b using lithium aluminium hydride took place exclusively from the Re face to give (1R,2S,3S)-1,3-disubstituted-3-aminopropane-1,2-diols 6a and 6b. These amino-diols were characterised by N-acetylation and the stereochemical sense of the hydride reduction was confirmed by conversion of amides 7a and 7b into α-amino acid derivatives 10a and 10b.     

C11H12 Hydrocarbons—II : Preparation of tricyclo[5.4.0.0]undeca-3,8,10-triene a norbornenone route from cycloheptatriene

A stereoselective 6-step synthesis of the C₁₁H₁₂ hydrocarbon cis,anti,cis-tricyclo[5.4.0.0^2,5]undeca-3,8,10-triene (2a) is described. The dichloro compound 3c was prepared by the selective reduction of 3a with chromous perchlorate-ethylenediamine complex, a general reagent for this type of transformation. Irradiation of 3c produced 6a and 7a in ∼ 7:1 ratio. Reduction of the mixture with sodium produced ketal mixture 6b and 7b. The ketals were hydrolyzed to ketones 6c and 7c and the ketones decarbonylated to 2a and an isomeric hydrocarbon tentatively assigned as homobasketene 2b′. Hydrocarbon 2a was readily obtained pure by a silver nitrate extraction procedure and 2b′ by preparative VPC. It was shown that pure 6c gives only 2a and therefore, 7c is the source of 2b′. The stereochemical assignments, based on both spectral and chemical evidence, are discussed.     

Networks of icosahedra in the sodium-zinc-stannides Na16Zn13.54Sn13.46(5), Na22Zn20Sn19(1), and Na34Zn66Sn38(1)

The three new ternary phases Na₁₆Zn_13.54Sn_13.46(5) (I), Na₂₂Zn₂₀Sn₁₉₍₁₎ (II), and Na₃₄Zn₆₆Sn₃₈₍₁₎ (III) were obtained by direct fusion of the pure elements and characterized by single crystal X-ray diffraction experiments: I, Ibam, Z=8, a=27.401(1), b=16.100(1), c=18.431(1) Å, R₁/wR₂ (all data)=0.051/0.088; II, Pnma, Z=4, a=16.403(1), b=15.598(1), c=22.655(6) Å, R₁/wR₂ (all data)=0.038/0.071; III, R3¯m, Z=3, a=16.956(1), c=36.861(1) Å, R₁/wR₂ (all data)=0.045/0.092. The structures consist of complex 3D cluster networks made of Zn and Sn atoms with the common motif of Kagomé nets of icosahedra. Additionally to the new heteroatomic {Zn_12−xSn_x} icosahedra that are omnipresent, triangular units, cages, and pairs of triply fused icosahedra fill the cavities of the Kagomé nets in compounds I, II, and III, respectively. Whereas I crystallizes in a new structure type, II and III have structural analogs in trielide chemistry. All three compounds closely approach the electron numbers expected for valence compounds according to the extended 8-N rule. The concept of achieving an isovalent situation to triel elements by combination of electron poorer and richer elements and the readily mixing of Zn and Sn allow the formation of icosahedral and triangular clusters without the participation of a group 13 element.     

Synthesis of (2S,3R)- and (2S,3S)-[3-H1]-proline via highly stereoselective hydrolysis of a silyl enol ether

A straightforward synthesis of (2S)-[3,3-²H₂]-proline 1c and (2S,3R)- and (2S,3S)-[3-²H₁]-proline, 1b and 1a, respectively, has been devised. The key step of the route to the latter compounds involves highly stereoselective hydrolysis of the silyl enol ethers 3 and 3a, respectively, with protonation (deuteriation) from the re-face of the silyl enol ether.     

New bis(fluoro-ponytailed) bipyridine ligands for Pd-catalyzed Heck reactions under fluorous biphasic catalysis condition

Three highly fluorinated bipyridine derivatives (4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy) {R_f=HCF₂(CF₂)₇ (1a), n-C₈F₁₇ (1b), n-C₁₀F₂₁ (1c)} have been synthesized using 4,4′-bis(BrCH₂)-2,2′-bpy and the corresponding fluorinated alkoxides. The fluorine contents of ligands 1a-c are 58.3, 59.8, and 62.3%, respectively. Despite its high fluorine content, the ligand 1a with a -CF₂H polar terminal group is more soluble in organic solvents. The ligand 1b is a white solid and is still moderately soluble in CH₂Cl₂. The ligand 1c has a high fluorophilicity, the partition ratio being 42:1 for the n-C₈F₁₈/CH₂Cl₂ system. The reaction of ligands 1a-c with [PdCl₂(CH₃CN)₂] results in the novel Pd complexes [PdCl₂(4,4′-bis-(R_fCH₂OCH₂)-2,2′-bpy)] where R_f=HCF₂(CF₂)₇ (2a), n-C₈F₁₇ (2b), n-C₁₀F₂₁ (2c), respectively. The Pd complex 2b is a pale yellow solid, and has been tested unsatisfactorily for FBC. Insoluble in organic solvents, the Pd complex 2c dissolves only in fluorinated solvents, for instance FC77, which is mainly n-C₈F₁₈. The novel Pd complex 2c has been tested as a catalyst in Heck reactions under a fluorous biphasic catalysis condition. It was found that the Pd complex 2c, after an easy separation, keeps its catalytic activity (>90% yield), even after seven runs. The TGA studies indicate that the Pd complexes 2a-c are stable up to 330 °C.     

Novel photo-induced oxidative cyclization of 1,3-dimethyl-5-(1-arylmethylidene)pyrimidine-2,4,6(1,3,5H)-triones: synthesis and properties of areno[5,6]pyrano[2,3-d]pyrimidine-2,4(1,3H)-dionylium ions and their photo-induced autorecycling oxidizing reaction toward some amines

Novel photo-induced oxidative cyclization was accomplished to synthesize areno[b]pyrimido[5,4-e]pyran-2,4(1,3H)-dionylium ions 13a-c⁺·ClO₄⁻. Furthermore, 13a-c⁺·BF₄⁻ and their phenyl-substituted derivatives 19a,b⁺·BF₄⁻ were alternatively synthesized by the reaction of salicylaldehyde and its naphthyl derivatives with barbituric acids and subsequent treatment with aq. HBF₄. Structural characteristics of 13a-c⁺ and 19a,b⁺ were clarified on inspection of the UV-vis and NMR spectral data as well as X-ray crystal analyses. The electrochemical properties were studied by the CV measurement. In a search for reactivity, reactions of 13a-c⁺·BF₄⁻ with some nucleophiles, hydride, benzylamine, and H₂O, were also carried out. The photo-induced autorecycling oxidation reactions of 13a-c⁺·BF₄⁻ toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) in 643-3600% yield (recycling number of 13a-c⁺·BF₄⁻: 6.4-36.0).     

3-Amino- and 3-acylamido-2-phosphonopyridines: synthesis by Pd-catalyzed P-C coupling, structure and conversion to pyrido[b]-anellated PC-N heterocycles

Palladium catalyzed cross-coupling of 3-amino- and 3-acylamido-2-bromopyridines 1a-f with triethyl phosphite allowed the synthesis of 3-amino- and 3-acylamido pyridine-2-phosphonic acid diethyl esters 2a-f, whereas nickel catalysts, although providing access to related anilido-2-phosphonates, proved inactive. Reduction of the aminophosphonate 2a with LiAlH₄ afforded 3-amino-2-phosphinopyridine (3a), which was cyclocondensed with dimethylformamide dimethyl acetal (DMFA) via phosphaalkene intermediates 4a to the novel pyrido[b]-anellated 1,3-azaphosphole 5a. Reaction of amidophosphonates 2b-f with LiAlH₄ did not result in the expected reductive cyclization, as shown by closely related anilido-2-phosphonates, but led to product mixtures containing N-secondary 3-amino-2-phosphinopyridines 3b-f as the main or major component. The conversion of 3b,d,e with DMFA to 5b,d,e provides first examples of N-substituted pyrido[b]-anellated azaphospholes. Structures were confirmed by multinuclear NMR and X-ray crystallography (for 2c, 3b).     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

Synthesis and properties of pyrazine-pillared Ag3Mo2O4F7 and AgReO4 layered phases

The new pyrazine-pillared solids, AgReO₄(C₄H₄N₂) (I) and Ag₃Mo₂O₄F₇(C₄H₄N₂)₃ (C₄H₄N₂=pyrazine, pyz) (II), were synthesized by hydrothermal methods at 150 °C and characterized using single crystal X-ray diffraction (I—P2₁/c, No. 14, Z=4, a=7.2238(6) Å, b=7.4940(7) Å, c=15.451(1) Å, β=92.296(4)°; II—P2/n, No. 13, Z=2, a=7.6465(9) Å, b=7.1888(5) Å, c=19.142(2) Å, β=100.284(8)°), thermogravimetric analysis, UV-Vis diffuse reflectance, and photoluminescence measurements. Individual Ag(pyz) chains in I are bonded to three perrhenate ReO₄^- tetrahedra per layer, while each layer in II contains sets of three edge-shared Ag(pyz) chains (π-π stacked) that are edge-shared to four Mo₂O₄F₇^3- dimers. A relatively small interlayer spacing results from the short length of the pyrazine pillars, and which can be removed at just slightly above their preparation temperature, at >150-175 °C, to produce crystalline AgReO₄ for I, and Ag₂MoO₄ and an unidentified product for II. Both pillared solids exhibit strong orange-yellow photoemission, at 575 nm for I and 560 nm for II, arising from electronic excitations across (charge transfer) band gaps of 2.91 and 2.76 eV in each, respectively. Their structures and properties are analyzed with respect to parent ‘organic free’ silver perrhenate and molybdate solids which manifest similar photoemissions, as well as to the calculated electronic band structures.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

New synthetic route to polyphosphine ligands bearing 1,2,4,5-tetrakis(phosphino)benzene framework: structural characterizations of 1,4-(PPh2)2-2,5-(PR2)2-C6F2 (R = Ph, Pr, Et)

Reactions of 1,4-dibromo-2,5-difluorobenzene with two equivalents of lithium diisopropylamide at low temperature (T < −90 °C) followed by a quench with a slight excess of ClPPh₂ afford 1,4-dibromo-2,5-bis(diphenylphosphino)-3,6-difluorobenzene (1) in good yields. Reacting 1 with two equivalents of BuLi followed by a quench with a slight excess of ClPR₂ yield novel 1,2,4,5-tetrakis(phosphino)-3,6-difluorobenzenes 1,4-(PPh₂)₂-2,5-(PR₂)₂-C₆F₂ (R = Ph (2a); R = ⁱPr (2b); R = Et (2c)) in moderate yields. Compounds 1 and 2a-c were characterized by multinuclear NMR spectroscopy and elemental analyses. In addition, molecular structures of 2a-c have been determined by single crystal X-ray crystallography. Phosphorus atoms of PPh₂/PR₂ substituents in 2a-c are displaced from the plane of the central phenyl ring due to steric interactions with neighboring groups.     

Salen-ligands based on a planar-chiral hydroxyferrocene moiety: Synthesis, coordination chemistry and use in asymmetric silylcyanation

Condensation of the O-protected hydroxyferrocene carbaldehyde (S_p)-1 with suitable diamines, followed by liberation of the hydroxyferrocene moiety leads to a new type of ferrocene-based salen ligands (3). While the use of ethylenediamine in the condensation reaction yields the planar-chiral ethylene-bridged ligand [(S_p,S_p)-3a], reaction with the enantiomers of trans-1,2-cyclohexylendiamine gives rise to the corresponding diastereomeric cyclohexylene-bridged systems [(S,S,S_p,S_p)-3b and (R,R,S_p,S_p)-3c], which feature a combination of a planar-chiral ferrocene unit with a centrochiral diamine backbone. Starting with the ferrocene-aldehyde derivative (R_p)-1, the enantiomeric ligand series (3d/e/f) is accessible via the same synthetic route.The (S_p)-series of these newly developed N₂O₂-type ligands was used for the construction of the corresponding mononuclear bis(isopropoxy)titanium (4a/b/c), methylaluminum (5a/b/c) and chloroaluminum-complexes (6a/b/c), which were isolated in good yields and identified by X-ray diffraction in several cases. The aluminum complexes (5/6) were successfully used in the Lewis-acid catalyzed addition of trimethylsilylcyanide to benzaldehyde, yielding the corresponding cyanohydrins in 45-62% enantiomeric excess.     

Cyclopentadienyl tungsten complexes with thiocarboxylate and thiosulfonate ligands: Structures of CpW(CO)3SCOPh and CpW(CO)3SSO2-4-C6H4Cl

Treatment of the hydrosulfido tungsten complex CpW(CO)₃SH with acid chlorides (RCOCl) or sulfonyl chlorides (RSO₂Cl) affords CpW(CO)₃SCOR (1) [R = Me (a), CH₂Cl (b), Ph (c), 4-C₆H₄NO₂ (d)] and CpW(CO)₃SSO₂R (2) [R = Me (a), Ph (b), 4-C₆H₄Cl (c), 4-C₆H₄NO₂ (d)], respectively. The novel complexes, 1 and 2, were fully characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structures of CpW(CO)₃SCOPh (1c) and CpW(CO)₃SSO₂-4-C₆H₄Cl (2c) were determined by an X-ray crystal structure analysis.     

Phosphorus–nitrogen compounds: Part 19. Syntheses,structural and electrochemical investigations,biological activities,and DNA interactions of new spirocyclic monoferrocenylcyclotriphosphazenes

The reactions of hexachlorocyclotriphosphazatriene, N₃P₃Cl₆, with N-alkyl-N-ferrocenylmethylethylene diamines, FcCH₂NH(CH₂)₂NHR₁ [R₁ = Me (1) and Et (2)], and sodium [3-(N-ferrocenylmethylamino)-1-propanoxide] (3) produce spirocyclic monoferrocenyl tetrachlorophosphazenes (1a–3a). The tetrapyrrolidinophosphazenes (1b–3b) are prepared from the reactions of corresponding phosphazenes (1a–3a) with excess pyrrolidine. The reaction of 1a with excess morpholine affords geminal-morpholino phosphazene (1c), whilst the reactions of 2a and 3a give diethylaminotrimorpholino (2c) and fully substituted morpholino products (3c), respectively. The structural investigations of the compounds are examined by Fourier transform IR, MS, ¹H, ¹³C, ³¹P NMR, DEPT, HETCOR, and HMBC techniques. The crystal structures of 3b and 3c are determined using X-ray crystallography. Cyclic voltammetric and chronoamperometric data show that compounds 1a–3a, 1b–3b, and 1c–3c exhibit electrochemically reversible one-electron oxidation of Fc redox centers which are hardly affected by the substituents on the phosphazene ring. The compounds 1b, 2b, 3b, and 3c are screened for antibacterial activities against Gram-positive and Gram-negative bacteria and for antifungal activities against yeast strains. In addition, the antituberculosis activities (in vitro) of these compounds are evaluated against INH-susceptible reference strain M. tuberculosis H37Rv, and six multi-drug resistant clinical M. tuberculosis isolates. Compound 2b is found to be the most active against the susceptible the reference strain. In addition, 1b, 2b, and 3c are active against all the multidrug-resistant clinical isolates at the highest concentrations. Gel electrophoresis data indicate that the compounds promote the formation of strand breaks in plasmid DNA. Almost all the concentrations lost of supercoiled DNA suggests that the compound 3b is very efficient plasmid-modifier. The compounds inhibit BamHI cleavage of pUC18 DNA while restricting HindIII.