Unusual oxidation states give reversible room temperature magnetocaloric effect on perovskite-related oxides SrFe0.5Co0.5O3

The magnetic properties and the magnetocaloric effect are presented for the perovskite-related oxide SrFe_0.5Co_0.5O₃ prepared using electrochemical oxidation. SrFe_0.5Co_0.5O₃ exhibits a second order paramagnetic-ferromagnetic transition close to room temperature (T_C=330 K). The maximal magnetic entropy change ΔS_M^Max , the maximal adiabatic temperature change ΔT_ad and the refrigerant capacity are found to be equal to respectively 4.0 J/kgK, 1.8 K and 258 J/kg while raising the B-field change from 0 to 5 T.     

Temperature behavior of the protonic conductor K4LiH3(SO4)4

The results of the X-ray structural study for the K₄LiH₃(SO₄)₄ single crystal are presented at a wide temperature range. The thermal expansion of the crystal using the X-ray dilatometry and the capacitance dilatometry from 8 to 500 K was carried out. The crystal structures data collection, solution and refinement at 125, 295, 443 and 480 K were performed. The K₄LiH₃(SO₄)₄ crystal has tetragonal symmetry with the P4₁ space group (Z=4) at room temperature as well as at the considered temperature range. The existence of a low-temperature, para-ferroelastic phase transition at about 120 K is excluded. The layered structure of the crystal reflects a cleavage plane parallel to (001) and an anisotropy of the protonic conductivity. The superionic high-temperature phase transition at T_S=425 K is isostructural. Nevertheless, taking into account an increase of the SO₄ tetrahedra libration above T_S, a mechanism of the Grotthus type could be applied for the proton transport explanation.     

Ion-beam irradiation of lanthanum compounds in the systems La2O3-Al2O3 and La2O3-TiO2

Thin crystals of La₂O₃, LaAlO₃, La_2/3TiO₃, La₂TiO₅, and La₂Ti₂O₇ have been irradiated in situ using 1 MeV Kr²⁺ ions at the Intermediate Voltage Electron Microscope-Tandem User Facility (IVEM-Tandem), Argonne National Laboratory (ANL). We observed that La₂O₃ remained crystalline to a fluence greater than 3.1×10¹⁶ ions cm⁻² at a temperature of 50 K. The four binary oxide compounds in the two systems were observed through the crystalline-amorphous transition as a function of ion fluence and temperature. Results from the ion irradiations give critical temperatures for amorphisation (T_c) of 647 K for LaAlO₃, 840 K for La₂Ti₂O₇, 865 K for La_2/3TiO₃, and 1027 K for La₂TiO₅. The T_c values observed in this study, together with previous data for Al₂O₃ and TiO₂, are discussed with reference to the melting points for the La₂O₃-Al₂O₃ and La₂O₃-TiO₂ systems and the different local environments within the four crystal structures. Results suggest that there is an observable inverse correlation between T_c and melting temperature (T_m) in the two systems. More complex relationships exist between T_c and crystal structure, with the stoichiometric perovskite LaAlO₃ being the most resistant to amorphisation.     

Determination of the enthalpy of fusion of K3TaF8 and K3TaOF6

The areas of the fusion and crystallization peaks of K₃TaF₈ and K₃TaOF₆ have been measured using the DSC mode of the high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities and the temperature dependence of the used calorimetric method sensitivity, the values of the enthalpy of fusion of K₃TaF₈ at temperature of fusion 1039 K: Δ_fusH_m(K₃TaF₈; 1039 K) = (52 ± 2) kJ mol⁻¹ and of K₃TaOF₆ at temperature of fusion 1055 K: Δ_fusH_m(K₃TaOF₆; 1055 K) = (62 ± 3) kJ mol⁻¹ have been determined.     

Thermodynamics of 2D polymerized tetragonal phase of fullerene C60 in the range from T→0 to 650 K at standard pressure

By dynamic calorimetry the temperature dependence of heat capacity for two-dimensional (2D) polymerized tetragonal phase of C₆₀ has been determined over the 300-650 K range at standard pressure mainly with an uncertainty ±1.5%. In the range 490-550 K, an irreversible endothermic transition of the phase, caused by the depolymerization of the polymer, has been found and characterized. Based on the experimental data obtained and literature information, the thermodynamic functions of 2D polymerized tetragonal phase of C₆₀, namely, the heat capacity C°_p(T), enthalpy H°(T)−H°(0), entropy S°(T), and Gibbs function G°(T)−H°(0), have been calculated over the range from T→0 to 490 K. From 150 to 330 K in an adiabatic vacuum calorimeter and between 330 and 650 K in a dynamic calorimeter the thermodynamic properties of the depolymerization products have been examined and compared with the corresponding data for the monomeric phase C₆₀.     

Crystal structure of BaMg2Si2O7 and Eu luminescence

Crystal structure of BaMg₂Si₂O₇ was determined and refined by a combined powder X-ray and neutron Rietveld method (monoclinic, C2/c, no. 15, Z=8, a=7.24553(8) Å, b=12.71376(14) Å, c=13.74813(15) Å, β=90.2107(8)°, V=1266.44(2) Å³; R_p/R_wp=3.38%/4.77%). The structure contains a single crystallographic type of Ba atom coordinated to eight O atoms with C₁ (1) site symmetry. Under 325-nm excitation Ba_0.98Eu_0.02Mg₂Si₂O₇ exhibits an asymmetric emission band around 402 nm. The asymmetric shape of the emission band is likely associated with a small electron-phonon coupling in BaMg₂Si₂O₇. The integrated intensity of the emission band was observed to remain constant over the temperature range 4.2-300 K.     

Determination of thermodynamic properties of aqueous mixtures of MgCl2 and Mg(NO3)2 by the potentiometric method at T = 298.15

In this research, thermodynamic properties of the ternary electrolyte system (MgCl₂ + Mg(NO₃)₂ + H₂O) were investigated using a potentiometric method. The galvanic cell used had no liquid junction of type: Mg-ISE|MgCl₂ (m_A), Mg(NO₃)₂ (m_B), H₂O|Ag/AgCl. The measurements were performed at T = 298.15 K and at total ionic strengths from 0.001 to 8.000 mol/kg for different series of salt ratios r=mMgCl₂/mMg₂(NO₃) =1.00, 2.50, 5.00, 7.50, 10.00 and 15.00. The PVC based magnesium ion-selective electrode (Mg-ISE) and the Ag/AgCl electrode used in this work were prepared in our laboratory and showed a reasonably good Nernst response. The Pitzer ion interaction model and Harned rule were used to illustrate the ternary electrolyte system investigated. The experimental results showed that both Pitzer model and Harned rule were suitable to be used satisfactorily to describe this ternary system.     

K2B12F12: A rare A2X structure for an ionic compound at ambient conditions

The anhydrous salt K₂B₁₂F₁₂ crystallized from aqueous solution and its structure was determined by single crystal X-ray diffraction. The Ni₂In-type structure it exhibits is rare for an A₂X ionic compound at 25 °C and 1 atm., consisting of an expanded hexagonal close-packed array of B₁₂F₁₂²⁻ centroids (cent?cent distances: 7.204-8.236 Å) with half of the K⁺ ions filling all of the O_h holes and half of the K⁺ ions filling all of the D_3h trigonal holes in the close-packed layers that are midway between two “empty” T_d holes. The structure is also unusual in that the bond-valence sum for the K⁺ ions in O_h holes is less than or equal to 0.73 (the bond-valence sum for the other type of K⁺ ion is 1.16). A variation of the Ni₂In structure is exhibited by the previously published monohydrate Cs₂(H₂O)B₁₂F₁₂, for which an improved structure is also reported here. For K₂B₁₂F₁₂: monoclinic, C2/c, a = 8.2072(8), b = 14.2818(7), c = 11.3441(9) Å, β = 92.832(5)°, Z = 4, T = 120(2) K. For Cs₂(H₂O)B₁₂F₁₂: orthorhombic, P2₁2₁2₁, a = 9.7475(4), b = 10.2579(4), c = 15.0549(5) Å, Z = 4, T = 110(1) K.     

Thermoelectric properties of Ag-doped n-type (Bi2Te3)0.9-(Bi2−xAgxSe3)0.1 (x=0-0.4) alloys prepared by spark plasma sintering

Ag-doped n-type (Bi₂Te₃)_0.9-(Bi_2−xAg_xSe₃)_0.1 (x=0-0.4) alloys were prepared by spark plasma sintering and their physical properties evaluated. When at low Ag content (x=0.05), the temperature dependence of the lattice thermal conductivity follows the trend of (Bi₂Te₃)_0.9-(Bi₂Se₃)_0.1; while at higher Ag content, a relatively rapid reduction above 400 K can be observed due possibly to the enhancement of scattering of phonons by the increased defects. The Seebeck coefficient increases with Ag content, with some loss of electrical conductivity, but the maximum dimensionless figure of merit ZT can be obtained to be 0.86 for the alloy with x=0.4 at 505 K, about 0.2 higher than that of the alloy (Bi₂Te₃)_0.9-(Bi₂Se₃)_0.1 without Ag-doping.     

Separation of aromatic hydrocarbons from alkanes using ammonium ionic liquid C2NTf2 at T = 298.15 K

(Liquid + liquid) equilibrium data are presented for four ternary systems of an alkane, or aromatic compound and ethyl(2-hydroxyethyl)dimethylammonium bis{(trifluomethyl)sulfonyl}imide (C₂NTf₂) at 298.15 K: [hexane + benzene + C₂NTf₂], [hexane + p-xylene + C₂NTf₂], and [hexane, or octane + m-xylene + C₂NTf₂]. The separation of aromatic hydrocarbons (benzene, or p-xylene, or m-xylene) from aliphatic hydrocarbons (hexane, or octane) is investigated by extraction with the ammonium ionic liquid. Selectivities and distribution ratios are discussed for these mixtures at constant temperature. The data were analysed and compared to those previously reported for other ionic liquids and especially for the system {hexane + benzene + [EMIM][NTf₂]}. The nonrandom two liquid NRTL model was successfully used to correlate the experimental tie-lines and to calculate the phase compositions of the ternary systems.     

Preparation of La0.67Ca0.33MnO3:Ag x polycrystalline by sol–gel method

La_0.67Ca_0.33MnO₃:mol%Ag _x (LCMO:Ag _x , x = 0, 0.04, 0.08, 0.10 and 0.20) ceramics were prepared by sol–gel method. The X-ray diffraction studies of the LCMO:Ag _x samples confirm the pure phase of the LCMO composites with Pbnm space group. With the increase of Ag doping from x = 0 to 0.20, the normalized resistivity (ρ/ρ _300K ) of the samples around the metal–insulator transition temperature (T _p ) reduced in sequence. Both T _p and the peak of temperature coefficient of resistance (T _k ) improved 5–8 K. Energy dispersive X-ray spectroscopy analysis showed that the composition of La, Ca and Mn of the obtained LCMO composites was in accordance with the composition of the precursor. The results indicated that the improvement of grain boundaries and crystallization were responsible for the enhancements of ρ, T _p and T _k of LCMO:Ag _x composites. The fitted curves of electrical resistivity for LCMO:Ag _x composites indicated that the mechanisms of grain/domain boundary, electron–electron and magnon scattering and adiabatic small polaron hopping are proposed to explain the phase transition of ferro-magnetic metallic region (T < T _p ) and the para-magnetic insulating region (T > T _p ), respectively.     

Thermodynamic properties of BaCeO3 and BaZrO3 at low temperatures

Specific heat capacities (C_p) of polycrystalline samples of BaCeO₃ and BaZrO₃ have been measured from about 1.6 K up to room temperature by means of adiabatic calorimetry. We provide corrected experimental data for the heat capacity of BaCeO₃ in the range T < 10 K and, for the first time, contribute experimental data below 53 K for BaZrO₃. Applying Debye's T³-law for T → 0 K, thermodynamic functions as molar entropy and enthalpy are derived by integration. We obtain C_p = 114.8 (±1.0) J mol⁻¹ K⁻¹, S° = 145.8 (±0.7) J mol⁻¹ K⁻¹ for BaCeO₃ and C_p = 107.0 (±1.0) J mol⁻¹ K⁻¹, S° = 125.5 (±0.6) J mol⁻¹ K⁻¹ for BaZrO₃ at 298.15 K. These results are in overall agreement with previously reported studies but slightly deviating, in both cases. Evaluations of C_p(T) yield Debye temperatures and identify deviations from the simple Debye-theory due to extra vibrational modes as well as anharmonicity. The anharmonicity turns out to be more pronounced at elevated temperatures for BaCeO₃. The characteristic Debye temperatures determined at T = 0 K are Θ₀ = 365 (±6) K for BaCeO₃ and Θ₀ = 402 (±9) K for BaZrO₃.     

Ferromagnetic-phase transition in the spinel-type CuCr2Te4

Ferromagnetic-phase transition in spinel-type CuCr₂Te₄ has been clearly observed. CuCr₂Te₄ is a telluride-spinel with the lattice constant , which has been synthesized successfully. The heat capacity exhibits a sharp peak due to the ferromagnetic-phase transition with the Curie temperature . This value of T_C corresponds exactly to that of the negative peak of dM/dT in low field of 1.0 Oe. The magnetic susceptibility shows the Curie-Weiss behavior between 380 and 650 K with the effective magnetic moment /Cr-ion and the Weiss constant . The low temperature magnetization indicates the spin-wave excitations, where the existence of first term of Bloch T^3/2 law and the next T^5/2 term are verified experimentally. This spin-wave excitation is detected up to approximately 250 K which is a fairly high temperature.     

An X-ray diffraction, magnetic susceptibility and spectroscopic studies of Yb2−xCrxO3

Polycrystalline samples with general formula Yb_2−xCr_xO₃ (0<x<0.03), obtained by sol-gel method and analyzed by X-ray diffraction, formed solid solutions over all the mentioned range. Cr showed a maximum solubility of 2.8 mol% in Yb₂O₃ sesquioxide at 1000 °C. A preferential substitution of Cr³⁺ ions over two cationic sites, 8b and 24d in the space group Ia-3 was found. The lattice parameters a are found to vary linearly (10.4402(4) Å <a<10.4372(1) Å) with the composition x. The two independent atoms Yb/Cr have octahedral coordination; however, the degrees of distortion of their coordination polyhedron are different. Replacing Yb³⁺ by Cr³⁺ introduces slight changes in the atomic coordinates leading to an increase of the mean cation-anion distances. The ability of Raman spectroscopy to detect changes in local coordination is utilized. A pseudo-tetrahedral coordination for the Cr³⁺ in the 24d site was found. Magnetic susceptibility measurements of all samples were done in a temperature range of 2-50 K. For T<37 K, the inverse paramagnetic susceptibilities depend linearly on temperature. However, in the high-temperature region, for T>37 K, the inverse paramagnetic susceptibilities are non-linear versus temperature. This deviation from the Curie-Weiss behaviour was discussed.     

Structure and magnetic properties of RE2Cu2Cd

The ternary intermetallic compounds RE₂Cu₂Cd (RE=Y, Sm, Gd-Tm, Lu) were synthesized by induction-melting of the elements in sealed tantalum tubes. The samples were characterized by X-ray powder diffraction. The structure of Gd₂Cu₂Cd was refined from single crystal X-ray diffractometer data: Mo₂FeB₂ type, space group P4/mbm, a=756.2(3), c=380.2(3) pm, wR2=0.0455, 321 F² values, 12 variables. The structures are 1:1 intergrowth variants of slightly distorted CsCl and AlB₂ related slabs of compositions RECd and RECu₂. The copper and cadmium atoms build up two-dimensional [Cu₂Cd] networks (257 pm Cu-Cu and 301 pm Cu-Cd in Gd₂Cu₂Cd) which are bonded to the rare earth atoms via short RE-Cu contacts (290 pm in Gd₂Cu₂Cd). Temperature dependent susceptibility measurements of RE₂Cu₂Cd with RE=Gd, Tb, Dy, and Tm show experimental magnetic moments which are close to the free RE³⁺ ion values. The four compounds show ferromagnetic ordering at T_C=116.7(2), 86.2(3), 48.4(1), and 14.5(1) K, respectively, as confirmed by heat capacity measurements. Dy₂Cu₂Cd shows a spin reorientation at T_N=16.9(1) K.     

Ab initio/DFT theory and multichannel RRKM study on the mechanisms and kinetics for the CH3S + CO reaction

The potential energy surface for the reaction of CH₃S with CO was calculated at the G3MP2//B3LYP/6-311++G(d,p) level. The rate constants for feasible channels leading to several products were calculated by TST and multichannel-RRKM theory. The results show that addition–elimination mechanism is dominant, while hydrogen abstraction mechanism is uncompetitive. The major channel is the addition of CO to CH₃S leading to an intermediate CH₃SCO which then decomposes to CH₃ + OCS. In the temperature range of 200–3000 K, the overall rate constants are positive temperature dependence and pressure independence, and it can be described by the expression as k = 1.10 × 10⁻¹⁶T^1.57exp(−3359/T) cm³ molecule⁻¹ s⁻¹. At temperature between 208 and 295 K, the calculated rate constants are in good agreement with the experimental upper limit data. At T = 1000 and 2000 K, the major product is CH₃ + OCS at lower pressure; while at higher pressure, the stabilization of IM1 is dominant channel.     

Synthesis, structure, and magnetism of Tb4PdGa12 and Tb4PtGa12

Single crystals of Tb₄MGa₁₂ (M=Pd, Pt) have been synthesized. The isostructural compounds crystallize in the cubic space group , with Z=2 and lattice parameters: a=8.5940(5) and 8.5850(3) Å for Tb₄PdGa₁₂ and Tb₄PtGa₁₂, respectively. The crystal structure consists of corner-sharing MGa₆ octahedra and TbGa₃ cuboctahedra. Magnetic measurements suggest that Tb₄PdGa₁₂ is an antiferromagnetic metamagnet with a Néel temperature of 16 K, while the Pt analog orders at T_N=12 K.     

Thermophysical properties of SrHfO3 and SrRuO3

Polycrystalline samples of strontium series perovskite type oxides, SrHfO₃ and SrRuO₃ were prepared and the thermophysical properties were measured. The average linear thermal expansion coefficients are 1.13×10⁻⁵ K⁻¹ for SrHfO₃ and 1.03×10⁻⁵ K⁻¹ for SrRuO₃ in the temperature range between 423 and 1073 K. The melting temperatures T_m of SrHfO₃ and SrRuO₃ are 3200 and 2575 K, respectively. The longitudinal and shear sound velocities were measured by an ultrasonic pulse-echo method at room temperature in air, which enables to evaluate the elastic moduli and Debye temperature. The heat capacity was measured by using a differential scanning calorimeter, DSC in high-purity argon atmosphere. The thermal diffusivity was measured by a laser flash method in vacuum. The thermal conductivities of SrHfO₃ and SrRuO₃ at room temperature are 5.20 and 5.97 W m⁻¹ K⁻¹, respectively.     

Ba6Ge25: low-temperature Ge-Ge bond breaking during temperature-induced structure transformation

In order to find the optimal conditions for sample preparation of the binary germanide Ba₆Ge₂₅, the germanium-rich part of the Ba-Ge phase diagram was redetermined by means of metallography, X-ray powder diffraction and differential thermal analysis. The temperature behavior of cubic Ba₆Ge₂₅ was investigated both on polycrystalline samples and single crystals. The temperature dependence of the lattice parameter exhibits two anomalies at about 180 and 230 K, respectively, which are caused by a structure transformation in two steps with hysteresis. Powder (T=10-295 K) and single-crystal (T=95-295 K) X-ray diffraction studies confirm that the symmetry of Ba₆Ge₂₅ (space group P4₁32) remains unchanged within the entire temperature range. A reconstructive behavior of the structural transformation is observed, involving Ge-Ge bond breaking and barium cation displacements. Some Ge4 type atoms (∼28%) are so significantly displaced during cooling that Ge4-Ge6 bonds break and new three-bonded (3b)Ge⁻ species (electron acceptors) are formed. Consequently, the number of charge carriers is reduced, affecting the physical properties. The reversible bond breaking involved in this process is a typical characteristic of a solid-state chemical reaction.     

(p, ρ, T) properties, and apparent molar volumes V? of ZnBr2 in methanol at T = (298.15 to 398.15) K and pressures up to p = 40 MPa

The (p, ρ, T) properties of pure methanol, the (p, ρ, T) properties and apparent molar volumes V_? of ZnBr₂ in methanol at T = (298.15 to 398.15) K and pressures up to p = 40 MPa are reported, and apparent molar volumes have been evaluated. The experimental (p, ρ, T, m) values were described by an equation of state. For the solutions the experiments were carried out at molalities m = (0.05772, 0.37852, 0.71585 and 1.95061) mol · kg⁻¹ of zinc bromide.