Liquid Chromatography/Electrochemistry/Mass Spectrometry as Screening Technique for Alcohols and Phenols in Fuels

Liquid chromatography (LC)/electro-chemistry/mass spectrometry (MS) with atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI) has been used for the determination of several alcohols and alkylphenols in gasoline and diesel fuels. After rapid sample preparation and a derivatization step with ferrocenecarboxylic acid chloride, the LC separation resulted in complex chromatograms. Selected mass traces helped to identify several groups of alcohols and phenols. Only a sum parameter could be obtained for alcohols and phenols of the same molecular mass because of the large number of structural isomers that were not chromatographically resolved in the mass traces. The results for qualitative screening of seven gasoline and four diesel fuel samples are presented. Apart from alcohols and phenols, several other compounds were also found in the samples. Many of these unknown compounds could be arranged in four series of homologues with a mass difference of 14 mass units. The potential of the method to analyze alcohol and phenol patterns without chromatographic separation was studied using both nanospray and electrospray ion sources in combination with tandem-MS.     

Separation of two groups of oestrogen mimicking compounds using micellar electrokinetic chromatography

Two groups of compounds are being investigated due to their reported oestrogen mimicking characteristics in the environment. Separation of phenolic compounds and synthetic oestrogens using micellar electrokinetic chromatography is reported. Photodiode array detection is used for both separations. A standard separation buffer can be used for both groups of compounds including zwitterionic buffer cyclohexylamino-1-propanesulfonic acid, 20 mM at pH 11.5. It was found necessary to include 15% acetonitrile and 25 mM sodium dodecyl sulfate to aid separation and maintain analytes in solution. Optimum separations are achieved using 20 kV with hydrodynamic injection for 5 s. The relative standard deviation (RSD) for reproducibility was investigated for a mixture of phenols and synthetic oestrogens. For these compounds RSD was found to be <0.6% in all cases. Peak efficiencies ranged from 76,000 to 150,000 theoretical plates for different analytes. Application to environmental samples is discussed.     

Comparison of the ion-exchange behaviour of zirconium, thorium, vanadium, uranium, stannic and titanium tungstates

Zirconium, thorium, uranium, vanadium, stannic and titanium tungstates have been prepared and their properties such as ion-exchange capacity, K(d) values of metal ions, chemical composition and stability have been compared. Titanium tungstate was found to be the most stable, and to have negligible capacity for tervalent cations.     

Tungstate as complex-forming reagent facilitating separation of selected polyphenols by capillary electrophoresis and its comparison with borate

A novel electrophoretic BGE containing tungstate as complex-forming reagent is suitable for the separation of polyphenols. Similar to molybdate-containing BGE reported earlier (cf. M. Polásek, et al.., Talanta 2006, 69, 192) addition of tungstate to BGE affects significantly migration of compounds/ligands with vicinal -OH groups due to the formation of negatively charged complexes involving W(VI) as central ion. Baseline separation of mixtures of flavonoids (apigenin, luteolin, hyperoside, quercetin, and rutin) and phenolic acids (chlorogenic and p-coumaric acid) was achieved within 15 min with optimized BGE of pH 7.4 containing 50 mM N-(2-hydroxyethyl)piperazine-2'-(2-ethanesulfonic acid) (HEPES), 2.2 mM tungstate, and 25% v/v of methanol. The separation was performed in a 75 cm (effective length 42 cm)x 75 microm id uncoated fused-silica capillary at 30 kV with spectrophotometric detection at 275 nm. The calibration curves were rectilinear for 25-175 microg/mL of all analytes (cinnamic acid as the internal standard). The LODs ranged from 1.8 to 6 microg/mL for all analytes except for chlorogenic acid. Intraday precision (n = 6) of migration times (RSD < or = 1.2%) and peak areas (RSD < or = 5.6%) was evaluated. The tungstate-based BGEs can be alternatively utilized for the analysis of polyphenols at considerably lower pH than with conventional alkaline borate-based BGEs.     

Sulfated tungstate as hydroxyl group activator for preparation of benzyl,including p-methoxybenzyl ethers of alcohols and phenols

Sulfated tungstate was found to be an effective heterogeneous and reusable catalyst for hydroxy group activation–mediated preparation of benzylic ethers including p-methoxybenzylic ethers of a wide range of alcohols and phenols under mild reaction conditions.     

Simultaneous determination of phenols (bibenzyl, phenanthrene, and fluorenone) in Dendrobium species by high-performance liquid chromatography with diode array detection

A new method of analysis of 11 phenols, including five bibenzyls, three phenanthrenes, and three fluorenones, using high-performance liquid chromatography (HPLC)-diode array detection (DAD) was described. The separation of 11 phenols was effected by RP-HPLC (Beckman Coulter ODS column, 5 microm, 250 mm x 4.6 mm) using linear gradient elution systems of acetonitrile-1/1000 trifluoroacetic acid (TFA). Satisfactory separation of these compounds was obtained in less than 45 min. The method was validated for linearity, repeatability, limits of detection (LOD) and limits of quantification (LOQ). Good results were obtained with respect to repeatability (relative standard deviation (RSD)<3.5%) and recovery (85.77-104.92%). The developed method was applied to the simultaneous determination of 11 phenols from totally 31 Dendrobium species (mainly of medicinal plants) as well as other four samples from the similar genera as Pholidota, Flickingeria and Bulbophyllum. The range of the total amounts of bibenzyl, phenanthrene and fluorenone were found to from trace: 4.00, not detected (nd): 0.42 and nd: 0.24 microg mg(-1), respectively.     

Application of polyelectrolyte complexes as novel pseudo-stationary phases in MEKC

Polyacrylic acid (PAA) and polymethacrylic acid (PMAA) with carboxyl groups partially blocked by dodecyltrimethylammonium bromide (DTAB) and tetrabutylammonium bromide (TBAB) were tested as new pseudo-stationary phases in micellar electrokinetic chromatography (MEKC). The separation of was examined using PAA and PMAA. Excellent resolution of the substituted phenols and derivatized amino acids was demonstrated using additives of PAA-DTAB polyelectrolyte complex in the running phosphate buffer. It was found that the capacity factors were proportional to the concentration of the complex PAA/DTAB. Critical micelle concentration was effectively zero. It was found that the migration times and efficiency of separation of phenols and derivatives of amino acids depended on the type of polymers and alkyltrimethylammonium salts used.     

Reversed phase liquid chromatography with UV absorbance and flame ionization detection using a water mobile phase and a cyano propyl stationary phase Analysis of alcohols and chlorinated hydrocarbons

The development of liquid chromatography with a commercially available cyano propyl stationary phase and a 100% water mobile phase is reported. Separations were performed at ambient temperature, simplifying instrumental requirements. Excellent separation efficiency using a water mobile phase was achieved, for example N=18 800, or 75 200 m(-1), was obtained for resorcinol, at a retention factor of k'=4.88 (retention time of 9.55 min at 1 ml min(-1) for a 25 cmx4.6 mm i.d. column, packed with 5 mum diameter particles with the cyano propyl stationary phase). A separation via reversed phase liquid chromatography (RP-LC) with a 100% water mobile phase of six phenols and related compounds was compared to a separation of the same compounds by traditional RP-LC, using octadecylsilane (ODS), i.e. C18, bound to silica and an aqueous mobile phase modified with acetonitrile. Nearly identical analysis time was achieved for the separation of six phenols and related compounds using the cyano propyl stationary phase with a 100% water mobile phase, as compared to traditional RP-LC requiring a relatively large fraction of organic solvent modifier in the mobile phase (25% acetonitrile:75% water). Additional understanding of the retention mechanism with the 100% water mobile phase was obtained by relating measured retention factors of aliphatic alcohols, phenols and related compounds, and chlorinated hydrocarbons to their octanol:water partition coefficients. The retention mechanism is found to be consistent with a RP-LC mechanism coupled with an additional retention effect due to residual hydroxyl groups on the cyano propyl stationary phase. Advantages due to a 100% water mobile phase for the chemical analysis of alcohol mixtures and chlorinated hydrocarbons are reported. By placing an absorbance detector in-series and preceding a novel drop interface to a flame ionization detector (FID), selective detection of a separated mixture of phenols and related compounds and aliphatic alcohols is achieved. The compound class of aliphatic alcohols is selectively and sensitively detected by the drop interface/FID, and the phenols and related compounds are selectively and sensitively detected by absorbance detection at 200 nm. The separation and detection of chlorinated hydrocarbons in a water sample matrix further illustrated the advantages of this methodology. The sensitivity and selectivity of the FID signal for the chlorinated hydrocarbons are significantly better than absorbance detection, even at 200 nm. This methodology is well suited to continuous and automated monitoring of water samples. The applicability of samples initially in an organic solvent matrix is explored, since an organic sample matrix may effect retention and efficiency. Separations in acetonitrile and isopropyl alcohol sample matrices compared well to separations with a water sample matrix.     

酚类化合物在二氧化锡微粒修饰碳纤维电极上的氧化及检测

采用金属有机化学气相沉积技术制备了SnO2 修饰碳纤维微柱电极 ,讨论了电极的表面结构和稳定性 ,并利用循环伏安法分析了酚类化合物在电极上的电化学行为。该电极对酚类化合物有明显的电催化活性 ,并能防止酚类物质在碳纤维电极表面的电聚合。以 3 氯苯酚为测试物 ,其检测的线性浓度范围为 2× 10 -6～ 1.2× 10 -5mol/L     

On-column capillary electrophoretic monitoring of rapid reaction kinetics for determination of the antioxidative potential of various bioactive phenols

An on-column capillary electrophoretic procedure for the determination of the antioxidative potential of various bioactive phenols, found in plant, fruit, and vegetable extracts, is described. The assay is based on a rapid mixing of phenols or phenolic extracts before the capillary, followed by pressurized injection of the reaction mixture into the capillary. After incubation of the reaction mixture inside the capillary, high voltage is switched on and separation of reactants and products is performed. Using hydrogen peroxide as a stressor, the kinetics of the oxidation of various bioactive phenols was studied (rutin, chlorogenic acid, quercetin, caffeic acid, gallic acid, and combinations of these) and compared with the oxidation rate of L-ascorbic acid as a reference. The concept was demonstrated for the determination of the antioxidative potential of various polyphenol mixtures and of the methanol extract of the sea buckthorn (Hippophae rhamnoides L.). In most cases quercetin has the highest rate constant of oxidation among the tested phenolic compounds. However, in the mixture L-ascorbic acid/quercetin, the oxidation rate of L-ascorbic acid was enhanced and oxidation of quercetin was strongly inhibited compared with the other combinations of tested polyphenols.     

Capillary electrophoresis-electrospray ionization-mass spectrometry method to determine the phenolic fraction of extra-virgin olive oil

We describe the first analytical method involving SPE and CZE coupled to ESI-IT MS (CZE-ESI-MS) used to identify and characterize phenolic compounds in olive oil samples. The SPE, CZE and ESI-MS parameters were optimized in order to maximize the number of phenolic compounds detected and the sensitivity of their determination. To this end we have devised a detailed method to find the best conditions for CE separation and the detection by MS of the phenolic compounds present in olive oil using a methanol-water extract of Picual extra-virgin olive oil (VOO). Electrophoretic separation was carried out using an aqueous CE buffer system consisting of 60 mM NH(4)OAc at pH 9.5 with 5% of 2-propanol, a sheath liquid containing 2-propanol/water 60:40 v/v and 0.1% v/v triethylamine. This method offers to the analyst the chance to study important phenolic compounds such as phenolic alcohols (tyrosol (TY), hydroxytyrosol (HYTY) and 2-(4-hydroxyphenyl)ethyl acetate), lignans ((+)-pinoresinol and (+)-1-acetoxypinoresinol), complex phenols (ligstroside aglycon (Lig Agl), oleuropein aglycon, their respective decarboxylated derivatives and several isomeric forms of these (dialdehydic form of oleuropein aglycon, dialdehydic form of ligstroside aglycon, dialdehydic form of decarboxymethyl elenolic acid linked to HYTY, dialdehydic form of decarboxymethyl elenolic acid linked to TY) and 10-hydroxy-oleuropein aglycon) and one other phenolic compound (elenolic acid) in extra-VOO by using a simple SPE before CE-ESI-MS analysis.     

Cation exchange/hydrophobic interaction monolithic chromatography of small molecules and proteins by nano liquid chromatography†

In this study, vinyl phenyl boronic acid modified lauryl methacrylate‐based monolithic column was successfully prepared for cation exchange/hydrophobic interaction monolithic chromatography of small molecules and proteins in nano LC. The polymeric mixture consisted of lauryl methacrylate, vinyl phenyl boronic acid as cation exchanger, ethylene dimethacrylate as cross‐linker, polyethylene glycol and methanol as binary porogenic solvent, and azobisisobutyronitrile as initiator. The resulting monolith showed good permeability and mechanical stability. Different ratios of monomer and porogens were used for optimizing the properties of the column. The monolithic column performance with respect to hydrophobic and cation exchange interactions was assessed by the separation a series of alkyl benzenes and anilines, respectively. cis‐Diol‐containing compounds such as phenols were also utilized to evaluate the retention behaviors of the vinyl phenyl boronic acid modified monolithic column. The monolithic column showed cation exchange interactions in the separation of aniline compounds. Theoretical plate number up to 52 000 plates/m was successfully achieved. The prepared monolith was further applied to the proteins with different acetonitrile content.     

Determination of the specific interaction of disubstituted aromatic compounds on hydrous zirconium oxide-loaded porous polymer resin

Summary A porous polymer resin loaded with hydrous zirconium oxide (Zr-gel) was evaluated as a stationary phase for the liquid chromatographic separation of disubstituted aromatic compounds. The prepared Zr-gel was used to separate disubstituted phenols andortho-substituted benzoic acid derivatives in reversed-phase mode. The retention time of catechol was greater than those of other disubstituted phenols; this implies that the Zr-gel has specificity for the phenolic hydroxyl group. The retention behavior ofortho-substituted benzoic acid derivatives on the Zr-gel was also evaluated in reversedphase mode using buffer. Phthalic acid was specifically retained in the vicinity of pH 6.0, which has been regarded as the equal adsorbic point. Similar behavior was also observed for salicylic acid, although the retention time of salicylic acid was less than that of phthalic acid. It seems that the specific retention behavior of hydrous zirconium oxide is a result of complexation with ligands such as hydroxyl and carboxyl groups. The results of this study have revealed that the retention mechanism of hydrous zirconium oxide is a combination of ion exchange and interaction based on complexation with ligands.     

Tungstate sulfuric acid (TSA)/KMnO4 as a novel heterogeneous system for rapid deoximation

Neat chlorosulfonic acid reacts with anhydrous sodium tungstate to give tungstate sulfuric acid (TSA), a new dibasic inorganic solid acid in which two sulfuric acid molecules connect to a tungstate moiety via a covalent bond. A variety of oximes were oxidized to their parent carbonyl compounds under mild conditions with excellent yields in short times by a heterogeneous wet TSA/KMnO4 in dichloromethane system.     

Applications of ligand-exchange-III Preparation and properties of phenol-formaldehyde-based resin in the iron(III) form

A number of resins containing ethylenediamine acetic acid groups have been prepared, and these intermediates (resin-EDTA) converted into the iron(III) form. The capacities of these exchangers in the formation of iron(III)-phenol complexes have been studied and compared with those of the Chelex-iron(III) resin. The character of the exchanger matrix is very important in connection with the retention of phenols and with the elution order. The modified Amberlite CG 4B in the iron(III) form can be used for the quantitative separation of phenolic compounds, a separation that is not possible with the Chelex-iron(III) resin.     

Tetraethylammonium tetrafluoroborate: a novel electrolyte with a unique role in the capillary electrophoretic separation of polyphenols found in grape seed extracts

A capillary electrophoretic method for resolving phenolic compounds found in grape seed extracts was developed using a quaternary ammonium salt as the main electrolyte solution. Seven polyphenols were separated and identified. The separation mechanism seems to involve association between quaternary ammonium cations and the polyphenols. Migration times roughly correlate with the size of the known phenols. The role of the alkyl substituents on the quaternary ammonium ions was investigated and is discussed. The method of analysis proposed herein exhibits high reproducibility in terms of migration times for a complex mixture using a single component background electrolyte.     

Liquid chromatography on unmodified and modified Spheron gels III. Phenolic compounds

Summary Chromatographic behaviour of phenolic compounds is studied on the ethyleneglycol methacrylate gel Spheron and on ion-exchangers produced by the chemical modification of this gels (cation exchanger Spheron S and anion exchanger Spheron DEAE) as compared to octadecyl silica. The hydrophobic effects obviously predominate in the retention mechanism on Spherons in aqueous methanolic mobile phases, but a selectivity differring from the behaviour on octadecyl silica was found for a number of phenolic compounds This is due to interactions with the functional groups in the unmodified and modified Spheron materials and may be utilized for the separation of phenols by liquid chromatography.     

High performance liquid chromatography of structural isomers using a cyclodextrin-poly(allylamine) coated silica column

Summary High performance liquid chromatography (HPLC) separation of substituted phenols by isocratic elution was investigated using a β-cyclodextrin-bonded column. The HPLC support was prepared in-house. This support was based on silica beads coated with a β-cyclodextrin-containing poly(allylamine). The retention behavior of some substituted phenol isomers and aromatic compounds was studied. The contribution of the amino groups of the polyamine and of the β-cyclodextrin cavity to the separation process is discussed. Two retention mechanisms, inclusion complex formation and acidbase interaction, were found. The effect of the composition and pH of the mobile phase on the separation was also examined.     

High performance liquid chromatography of structural isomers using a cyclodextrin-poly(allylamine) coated silica column

Summary High performance liquid chromatography (HPLC) separation of substituted phenols by isocratic elution was investigated using a β-cyclodextrin-bonded column. The HPLC support was prepared in-house. This support was based on silica beads coated with a β-cyclodextrin-containing poly(allylamine). The retention behavior of some substituted phenol isomers and aromatic compounds was studied. The contribution of the amino groups of the polyamine and of the β-cyclodextrin cavity to the separation process is discussed. Two retention mechanisms, inclusion complex formation and acidbase interaction, were found. The effect of the composition and pH of the mobile phase on the separation was also examined.     

Capillary Zone Electrophoresis of Eleven Priority Phenols with Amperometric Detection

A scheme for separation and detection of eleven priority phenols using capillary zone electrophoresis (CZE) coupled with amperometric detection is described. With a capillary of I.D. 50 μm and length 62.5 cm at 9 kV and an electrophoretic buffer of 20 mM CHES (pH 10.1), complete separation of the eleven compounds was achieved in less than 17 min. Amperometric detection was carried out using a carbon fiber microelectrode of diameter 9 μm inserted into the end of the detection capillary. Linearity over two orders of magnitude was generally obtained for the eleven priority phenols. With an electrode potential+1.10 V (vs. Ag/AgCl reference), the concentration limits of detection were in the sub-ppm (10^?6 M) level. This method was successfully applied to analysis of priority phenols in industrial waste water.