Eine mikromethode der flammen-atomabsorptions- und emissionsspektrometrie (platinschlaufen-methode)—II: Die bestimmung von As,Bi, Cd,Hg, Pb,Sb, Se,Te, Tl,Zn/Li,Na, K,Cs, Sr,Ba

This paper described the continuation of the work of Part I dealing with a microanalytical method in which the sample is introduced into a flame using an electrically heated platinum loop. This device is used in connection with an atomic absorption (AA) spectrometer. The detection limits are one to two orders of magnitude better than those of conventional flame AAS. The reproducibility depends on the element and is in general 3–5% (relative standard deviation) for concentrations in the $\text{ng}\text{ml}$ range. The platinum loop method can be also applied for flame emission analysis of small amounts of sample or the determination of low concentrations (alkalis). This application gives access to determinations in the lower ng or the pg range (detection limit of lithium: 0.6 pg).     

Open Chemistry,JupyterLab, REST,and quantum chemistry

Quantum chemistry must evolve if it wants to fully leverage the benefits of the internet age, where the worldwide web offers a vast tapestry of tools that enable users to communicate and interact with complex data at the speed and convenience of a button press. The Open Chemistry project has developed an open‐source framework that offers an end‐to‐end solution for producing, sharing, and visualizing quantum chemical data interactively on the web using an array of modern tools and approaches. These tools build on some of the best open‐source community projects such as Jupyter for interactive online notebooks, coupled with 3D accelerated visualization, state‐of‐the‐art computational chemistry codes including NWChem and Psi4, and emerging machine learning and data mining tools such as ChemML and ANI. They offer flexible formats to import and export data, along with approaches to compare computational and experimental data.     

Atomization mechanism and determination of Ag, Be, Cd, Li, Na, Sn and Zn in uranium-plutonium matrices by ETA-AAS

The atomization processes involved in the Electrothermal Atomization-Atomic Absorption Spectrometric (ETA-AAS) determination of Ag, Be, Cd, Li, Na, Sn and Zn in the presence of an uranium-plutonium matrix containing 25% Pu have been investigated. The significant fall in the absorbance signal for Ag, Cd, Na and Zn in an uranium matrix and its restoration in the presence of plutonium is probably correlated with the change in the partial pressure of oxygen released from the matrix at/below the signal appearance temperature (T_app). In case of Li and Sn, the signal remains unaffected irrespective of the U-Pu matrix which might be due to a high T_app for these analytes. Regarding Be, the steep suppression of the signal in the presence of the plutonium matrix compared to an uranium matrix can be ascribed to the formation of stable Pu-Be compounds (PuBe₁₃). Based on these studies, analytical procedures have been developed for the direct determination of nanogram amounts of these analytes in an U-Pu matrix with an average precision of 9% RSD.     

Synthesis and characterization of metal-centered, six-membered, mixed-valent, heterometallic wheels of iron, manganese, and indium

Heptanuclear metal-centered, six-membered, mixed-valent, heterometallic wheels 1-3 of iron, manganese, and indium were prepared in a one-pot reaction from N-benzyldiethanolamine (H2L(1)), cesium carbonate, [PPh4]2[MnCl4], and FeCl3 or InCl3. All three complexes were characterized by the combination of elemental analysis, FAB mass spectroscopy, X-ray diffraction and cyclic voltammetry and in the case of 1 additionally by M?ssbauer spectroscopy. In 1, four Mn(II) ions in the periphery are arranged in pairs alternating with one Fe(III) ion each, with an Fe(III) ion located in the center. In 2, three Mn(II) ions alternate with three In(III) ions, whereas in 3, four In(III) ions are arranged in pairs and alternate with one Mn(II) ion each. In 2 and 3 an Mn(II) ion is encapsulated in the center.     

Design, synthesis, evaluation, and structure of vitamin D analogues with furan side chains

Based on the crystal structures of human vitamin D receptor (hVDR) bound to 1α,25-dihydroxy-vitamin D(3) (1,25 D) and superagonist ligands, we previously designed new superagonist ligands with a tetrahydrofuran ring at the side chain that optimize the aliphatic side-chain conformation through an entropy benefit. Following a similar strategy, four novel vitamin D analogues with aromatic furan side chains (3a, 3b, 4a, 4b) have now been developed. The triene system has been constructed by an efficient stereoselective intramolecular cyclization of an enol triflate (A-ring precursor) followed by a Suzuki-Miyaura coupling of the resulting intermediate with an alkenyl boronic ester (CD-side chain, upper fragment). The furan side chains have been constructed by gold chemistry. These analogues exhibit significant pro-differentiation effects and transactivation potency. The crystal structure of 3a in a complex with the ligand-binding domain of hVDR revealed that the side-chain furanic ring adopts two conformations.     

Comparison of small metal clusters: Ni, Pd, Pt, Cu, Ag, Au

Structures of small clusters of Ni, Pd, Pt, Cu, Ag, and Au with n=2–34 and n=55 atoms are calculated as functions of number of atoms and temperature by the simulated annealing Monte Carlo method using an embedded atom potential.     

The Mitsunobu Reaction: Origin,Mechanism, Improvements,and Applications

The Mitsunobu reaction is a widely used and versatile method for the dehydrative oxidation–reduction condensation of an acid/pronucleophile usually with a primary or secondary alcohol that requires the combination of a reducing phosphine reagent together with an oxidizing azo reagent. The utility of this reaction stems from the fact that it is generally highly stereoselective and occurs with inversion of the stereochemical configuration of the alcohol starting material. Furthermore, as carboxylic acids, phenols, imides, sulfonamides, and other compounds can be used as the acid/pronucleophile, this reaction is useful for the preparation of a wide variety of functional groups. This Focus Review of the Mitsunobu reaction summarizes its origins, the current understanding of its mechanism, and recent improvements and applications.     

Structural,luminescence, and NMR studies of the reversible binding of acetate,lactate, citrate,and selected amino acids to chiral diaqua ytterbium,gadolinium, and europium complexes

The nature of the ternary complexes formed in aqueous media at ambient pH on reversible binding of acetate, lactate, citrate, and selected amino acids and peptides to chiral diaqua europium, gadolinium, or ytterbium cationic complexes has been examined. Crystal structures of the chelated ytterbium acetate and lactate complexes have been defined in which the carboxylate oxygen occupies an "equatorial" site in the nine-coordinate adduct. The zwitterionic adduct of the citrate anion with [EuL1] was similar to the chelated lactate structure, with a 5-ring chelate involving the apical 3-hydroxy group and the alpha-carboxylate. Analysis of Eu and Yb emission CD spectra and lifetimes (H2O and D2O) for each ternary complex, in conjunction with 1H NMR analyses of Eu/Yb systems and 17O NMR and relaxometric studies of the Gd analogues, suggests that carbonate, oxalate, and malonate each form a chelated (q = 0) square-antiprismatic complex in which the dipolar NMR paramagnetic shift (Yb, Eu) and the emission circular polarization (gem for Eu) are primarily determined by the polarizability of the axial ligand. The ternary complexes with hydrogen phosphate, with fluoride, and with Phe, His, and Ser at pH 6 are suggested to be monoaqua systems with Eu/Gd with an apical bound water molecule. However, for the ternary complexes of simple amino acids with [YbL1]3+, the enhanced charge demand favors a chelate structure with the amine N in an apical position. Crystal structures of the Gly and Ser adducts confirm this. In peptides and proteins (e.g. albumin) containing Glu or Asp residues, the more basic side chain carboxylate may chelate to the Ln ion, displacing both waters.     

Rigid, specific, and discrete gold nanoparticle/antibody conjugates

A general method of rigid, specific labeling of proteins with gold clusters has been devised. The method relies on the conjugation of a glutathione monolayer-protected gold cluster (MPC) with a single chain Fv antibody fragment (scFv), mutated to present an exposed cysteine residue. Efficient formation of a gold-thiolate bond between the MPC and scFv depends on activation of the gold cluster by chemical oxidation. Once formed, the MPC-scFv conjugate is treated with a reductant to quench cluster reactivity. The procedure has been performed with an MPC with an average Au(71) core and an scFv directed against a tetrameric protein, the influenza neuraminidase. A complex of the MPC-scFv conjugate with the neuraminidase was isolated, and the presence of four gold clusters was verified by cryoelectron microscopy.     

Polarizabilities and hyperpolarizabilities for the atoms Al, Si, P, S, Cl, and Ar: Coupled cluster calculations

Accurate static dipole polarizabilities and hyperpolarizabilities are calculated for the ground states of the Al, Si, P, S, Cl, and Ar atoms. The finite-field computations use energies obtained with various ab initio methods including Moller-Plesset perturbation theory and the coupled cluster approach. Excellent agreement with experiment is found for argon. The experimental alpha for Al is likely to be in error. Only limited comparisons are possible for the other atoms because hyperpolarizabilities have not been reported previously for most of these atoms. Our recommended values of the mean dipole polarizability (in the order Al-Ar) are alpha/e(2)a(0) (2)E(h) (-1)=57.74, 37.17, 24.93, 19.37, 14.57, and 11.085 with an error estimate of +/-0.5%. The recommended values of the mean second dipole hyperpolarizability (in the order Al-Ar) are gamma/e(4)a(0) (4)E(h) (-3)=2.02 x 10(5), 4.31 x 10(4), 1.14 x 10(4), 6.51 x 10(3), 2.73 x 10(3), and 1.18 x 10(3) with an error estimate of +/-2%. Our recommended polarizability anisotropy values are Deltaalpha/e(2)a(0) (2)E(h) (-1)=-25.60, 8.41, -3.63, and 1.71 for Al, Si, S, and Cl respectively, with an error estimate of +/-1%. The recommended hyperpolarizability anisotropies are Deltagamma/e(4)a(0) (4)E(h) (-3)=-3.88 x 10(5), 4.16 x 10(4), -7.00 x 10(3), and 1.65 x 10(3) for Al, Si, S, and Cl, respectively, with an error estimate of +/-4%.     

Spectrochemical determination of trace As, Fe, Hg, Mn, and Pb by an argon-stabilized U-shaped DC arc

Argon-stabilized U-shaped DC arc with a system for aerosol introduction was used for the determination of As, Fe, Hg, Mn, and Pb. By applying a computer program performing a time integration of the registered signals and by optimizing the working conditions of an U-shaped arc plasma, the detection capability for As, Fe, Hg, Mn, and Pb was improved, which contributed to the lowering of the detection limits. The lowest detection limits for Fe, Mn, and Pb were achieved during an integration time of 20 s, and for As and Hg during an integration time of 30 s, and their values were 1.1, 0.1, 0.9, 15, and 2.6 ng/mL, respectively. The detection limits obtained by our method with optimal integration times were compared with the detection limits obtained using other methods: inductively coupled plasma-atomic emission spectrometry (ICP-AES), directly coupled plasma-atomic emission spectrometry (DCP-AES), microwave-induced plasma-atomic emission spectrometry (MIP-AES), inductively coupled plasma-mass spectrometry (ICP-MS), and an improved thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS). The text was submitted by the authors in English.     

Measurement of K-line transition rates for Ti, V, Cr, Mn, Fe and Co using synchrotron radiation

Transition rates were obtained from spectra for pure metallic samples of atomic number ranging from 22 to 27, measured with monochromatic incident X-ray beams from a synchrotron source. The experimental setup for this consisted of an energy dispersive spectrometer in a conventional 45–45° geometry, mounted in an evacuated chamber. Absorption, detector efficiency and multiple scattering were taken into account. The results obtained are compared with recent theoretical and experimental data as well as with the well-known theoretical predictions from Scofield.     

Determination of zirconium, barium, lanthanum, aluminium, sodium, hafnium and fluorine in fluorozirconate glasses

Summary A procedure is described for the determination of the cationic and anionic components in fluorozirconate glasses. Zirconium, barium, aluminium, lanthanum, sodium and hafnium were determined by inductively coupled plasma atomic emission spectrometry (ICP/AES) after dissolution of the sample with an acid mixture in a microwave oven. The fluorine content was evaluated with two different techniques, namely potentiometry with a fluoride ion-selective electrode (FISE) and ion chromatography (IC). In this case the sample was solubilized by fusion with sodium carbonate.     

Reversions-Gas-Chromatographie, Me?technik, Anwendung

Zusammenfassung Das kennzeichnende Merkmal der Reversions-Gas-Chromatographie ist eine integrierende Wirkung auf Spurenmengen geringster Konzentration. Durch den Gradientenofen wird eine scharfe Trennung der Substanzen und damit ein sehr hohes Verhältnis der Konzentrationssteigerung erreicht. Es wird ein FID mit besonders kurzem Weg zwischen Trennsäule und Brennerdüse beschrieben. 3 Schaltanordnungen mit Regelvorrichtungen zeigen die Möglichkeit auf, auch strömungsabhängige Detektoren bis zu ihrer Nachweisgrenze voll auszunutzen. Die Eigenschaften einer RVGC/GC-Kopplung werden an einem Beispiel gezeigt, wobei besonders auf die Möglichkeit hingewiesen wird, diese Anordnung zur Peakidentifizierung der RVGC-Trennung heranzuziehen.

---

Reversion gas-chromatography, measuring technique and application

The attribute of reversion gas-chromatography is an integrant efficiency to trace amounts of lowest concentrations. By means of the gradient-oven a sharp separation and with it an exceptional raising in concentration is obtained. A FID with an especially short way between column and burner-jet is described. Three circuit diagrams with control units show the possibility to use also flow-dependent detectors up to their detection-limit. The properties of a RVGC/GC-coupling are demonstrated with special regard to the possibility to use this arrangement to identify the peaks of the RVGC-separation.

---

---

An dieser Stelle möchte ich meinen Mitarbeitern besonderen Dank sagen. Herrn M. Klobe danke ich besonders für seine Arbeiten über die RVGC-GC-Kopplung.     

Cold Molecules: Preparation,Applications, and Challenges

Research with cold molecules has developed rapidly in recent years. There is now a variety of established methods for cooling molecules into the millikelvin range. Nevertheless, a focal point of current research is directed toward finding new ways to bring the temperature of molecules even closer to absolute zero. Samples of cold molecules offer not only important applications for high‐resolution spectroscopy, which benefit from the increased interaction time of slow molecules with electromagnetic radiation; they also promise access to an exotic regime of chemical reactivity, in which phenomena such as quantum tunneling and quantum resonances predominate. This review begins with an introduction to the methods by which cold molecules can be prepared, with special emphasis on Stark deceleration and traps. In addition to applications of cold molecules that have already been partially achieved, an important focus of the review concentrates on possible future applications, and both aspects are illustrated with selected examples.     

Atomization mechanism and determination of Ag,Be, Cd,Li, Na,Sn and Zn in uranium-plutonium matrices by ETA-AAS

The atomization processes involved in the Electrothermal Atomization-Atomic Absorption Spectrometric (ETA-AAS) determination of Ag, Be, Cd, Li, Na, Sn and Zn in the presence of an uranium-plutonium matrix containing 25% Pu have been investigated. The significant fall in the absorbance signal for Ag, Cd, Na and Zn in an uranium matrix and its restoration in the presence of plutonium is probably correlated with the change in the partial pressure of oxygen released from the matrix at/below the signal appearance temperature (T(app)). In case of Li and Sn, the signal remains unaffected irrespective of the U-Pu matrix which might be due to a high T(app) for these analytes. Regarding Be, the steep suppression of the signal in the presence of the plutonium matrix compared to an uranium matrix can be ascribed to the formation of stable Pu-Be compounds (PuBe(13)). Based on these studies, analytical procedures have been developed for the direct determination of nanogram amounts of these analytes in an U-Pu matrix with an average precision of 9% RSD.     

Transition-metal-free O-, S-, and N-arylation of alcohols, thiols, amides, amines, and related heterocycles

A new protocol for the Ullmann-type arylation process of different aromatic heterocycles without any transition-metal catalyst, implying the use of a combination of an excess of potassium hydroxide and dimethyl sulfoxide, is described. The reaction can be performed between a broad range of starting nucleophiles including phenol, alcohols, amines, nitrogen-containing five-membered systems such as pyrazoles, imidazoles, and indoles, and amides with haloarenes, iodide and bromide derivatives giving the best results, the possible pathway involving the in situ generation of the corresponding benzyne intermediate. When the reaction was performed with 2-iodoaniline and either carboxamides or isothiocyanato derivatives, the corresponding benzoazole derivatives were obtained.     

Mackay,Anti-Mackay,Double-Mackay,Pseudo-Mackay,and Related Icosahedral Shell Clusters

Mackay introduced two important crystallographic concepts in a short paper published 40 years ago. One is the icosahedral shell structure (iss) consisting of concentric icosahedra displaying fivefold rotational symmetry. The number of atoms contained within these icosahedral shells and subshells agrees well with the magic numbers in rare gas clusters, (C₆₀) _N molecules, and some metal clusters determined by mass spectroscopy or simulated on energy considerations. The cluster of 55 atoms within the second icosahedral shell occurs frequently and has been called Mackay icosahedron, or simply MI, which occurs not only in various clusters, but also in intermetallic compounds and quasicrystals. The second concept is the hierarchic icosahedral structures caused by the presence of a stacking fault in the fcc packing of the successive triangular faces in the iss. For instance, a fault occurs after the ABC layers resulting an ABCB packing. This is, in fact, a hierarchic icosahedral structure of a core icosahedron connected to 12 outer icosahedra by vertex sharing, or an icosahedron of icosahedra (double MI. Contrary to Mackay's iss, a faulted hierarchic icosahedral shell is, in fact, a twinlike face capping of the underlying triangles; it is, therefore, called an anti-Mackay cluster. The hierarchic icosahedral structure in an Al-Mn-Pd icosahedral quasicrystal has a core of body-centered cube rather than an icosahedron and, therefore, is called a pseudo-Mackay cluster. The hierarchic icosahedral structures have been studied separately in the past in the fields of clusters, nanoparticles, intermetallic compounds, and quasicrystals, but the underlying geometry should be the same. In the following a unified geometrical analysis is presented.     

Synthesis, spectroscopy, and reactivity of meso-unsubstituted azuliporphyrins and their heteroanalogues. Oxidative ring contractions to carba-, oxacarba-, thiacarba-, and selenacarbaporphyrins

This paper reports the first detailed study on meso-unsubstituted azuliporphyrins, an important family of porphyrin-like molecules where one of the usual pyrrole rings has been replaced by an azulene subunit. Although the azulene moiety introduces an element of cross-conjugation, zwitterionic resonance contributors with tropylium and carbaporphyrin substructures give azuliporphyrins diatropic character that falls midway between true carbaporphyrins and nonaromatic benziporphyrins. Protonation affords an aromatic dication where this type of resonance interaction is favored due to the associated charge delocalization. Two different "3 + 1" syntheses of meso-unsubstituted azuliporphyrins have been developed. Acid-catalyzed reaction of readily available tripyrrane dicarboxylic acids with 1,3-azulenedicarbaldehyde, followed by oxidation with DDQ or FeCl(3), affords good yields of azuliporphyrins. Alternatively, azulene reacted with acetoxymethylpyrroles (2 equiv) in refluxing acetic acid/2-propanol to give tripyrrane analogues, and following a deprotection step, condensation with a pyrrole dialdehyde in TFA-CH(2)Cl(2) gave the azuliporphyrin system. The latter approach was also used to prepare 23-thia- and 23-selenaazuliporphyrins. However, reaction of the azulitripyrrane with 2,5-furandicarbaldehyde produced a mixture of three oxacarbaporphyrins in moderate yield. The free base forms of thia- and selenaazuliporphyrins both showed intermediary aromatic character that was considerably enhanced upon protonation. The UV-vis spectra for azuliporphyrins and their heteroanalogues showed four bands between 350 and 500 nm and broad absorptions at higher wavelengths. Addition of TFA gave dications that showed porphyrin-like spectra with Soret bands between 460 and 500 nm. In the presence of pyrrolidine, azuliporphyrins and their heteroanalogues undergo nucleophilic attack on the seven-membered ring to give carbaporphyrin adducts. These systems also undergo oxidative rearrangements under basic conditions with t-BuOOH to give benzocarbaporphyrins. The selenaazuliporphyrin afforded two benzoselenacarbaporphyrins, a previously unknown core-modified carbaporphyrin system. The proton NMR spectra for these compounds showed strong diatropic ring currents with the internal CH resonance upfield above -5 ppm, while the meso-protons resonated downfield near 10 ppm. The UV-vis spectra were also porphyrin-like and gave strong Soret bands at ca. 440 nm.