Dye-sensitized solar cells based on WO3

In research on alternative photoanode materials for dye-sensitized solar cells (DSCs), there is rarely any report on WO(3), probably due to its acidic surface and more positive (vs NHE) conduction band edge position compared to TiO(2) and ZnO. For the first time, dye-sensitized solar cells based on porous WO(3) nanoparticle films were successfully fabricated with efficiency of up to 0.75%. The multicrystalline structure of WO(3) was examined by Raman spectroscopy and X-ray diffraction analysis. It was found that significant performance enhancement can be obtained from treating the WO(3) nanoparticle film with TiCl(4); the TiCl(4)-treated WO(3) DSCs were recorded with efficiency reaching 1.46%.     

Dye-sensitized solar cells based on functionalized truxene structure

Three new metal-free organic dyes(TX1, TX2 and TX3) based on truxene core structure, with triphenylamine as the electron donor, thiophene as the p spacers, and cyanoacetic acid or rhodanine-3-acetic acid as the electron acceptor are designed and synthesized. Their UV–vis absorption spectra,electrochemical and photovoltaic properties were investigated. The cyanoacrylic acid is verified to be a better acceptor unit(meanwhile the anchoring group) compared to the rhodanine-3-acetic acid. And also, two anchoring groups in TX2 could provide stronger adsorption ability on the Ti O2 surface. In addition, the EIS results indicate a slower charge recombination processes for TX2. As a result, dye TX2 bearing two cyanoacetic acid outperforms the other two dyes, exhibiting the photo-conversion efficiency of 2.64%, with Jsc= 5.09 m A cm–2, Voc= 729 m V, FF = 71.1.     

Dye-sensitized solar cells based on composite solid polymer electrolytes

The ionic conductivity of polymer electrolytes and their interfacial contact with dye-attached TiO2 particles were enhanced markedly by the addition of amorphous oligomer into polymer electrolytes, resulting in very high overall energy conversion efficiency.     

Dye-sensitized nanocrystalline solar cells

The basic physical and chemical principles behind the dye-sensitized nanocrystalline solar cell (DSC: also known as the Gr?tzel cell after its inventor) are outlined in order to clarify the differences and similarities between the DSC and conventional semiconductor solar cells. The roles of the components of the DSC (wide bandgap oxide, sensitizer dye, redox electrolyte or hole conductor, counter electrode) are examined in order to show how they influence the performance of the system. The routes that can lead to loss of DSC performance are analyzed within a quantitative framework that considers electron transport and interfacial electron transfer processes, and strategies to improve cell performance are discussed. Electron transport and trapping in the mesoporous oxide are discussed, and a novel method to probe the electrochemical potential (quasi Fermi level) of electrons in the DSC is described. The article concludes with an assessment of the prospects for future development of the DSC concept.     

Dye-sensitized solar cells based on a single-crystalline TiO2 nanorod film

Highly crystalline TiO2 nanorods with lengths of 100-300 nm and diameters of 20-30 nm have been synthesized by a hydrothermal process in a cetyltrimethylammonium bromide surfactant solution. The microstructure measured by X-ray diffraction and high-resolution transmission electron microscopy was a pure highly crystalline anatase phase with a long nanorod shape. The addition of a triblock copolymer poly(ethylene oxide)100-poly(propylene oxide) 65-poly(ethylene oxide)100 (F127) decreased the length of the nanorods and kept the rod shape of the particles even after sintering at high temperatures. The rod shape kept under high calcination temperatures contributed to the achievement of the high conversion efficiency of light-to-electricity as discussed in the paper. A high conversion efficiency of light-to-electricity of 7.29% was obtained with the TiO2 single-crystalline anatase nanorod cell.     

Dye-sensitized solar cells based on anatase TiO2 nanoparticle/nanowire composites

Dye-sensitized solar cells were fabricated based on the composites of anatase TiO2 nanoparticles and single crystalline anatase TiO2 nanowires. Nanoparticle/nanowire composites can possess the advantages of both building blocks, i.e., the high surface area of nanoparticle aggregates and the rapid electron transport rate and the light scattering effect of single-crystalline nanowires. Three different composites were prepared with 5 wt %, 20 wt %, and 77 wt % nanowires, respectively. The performances of composite solar cells were compared with pure nanoparticle cells at a series of film thickness. With low nanowire concentrations (5 wt % and 20 wt %), the composite films maintain similar specific surface area as the pure nanoparticle films, while the composite cells show higher short-circuit current density and open-circuit voltage. An enhancement of power efficiency from 6.7% for pure nanoparticle cells to 8.6% for the composite cell with 20 wt % nanowires has been achieved under 1 Sun AM1.5 illumination (100 mW/cm2). For the composite film with 77 wt % nanowires, the nanowires became the major phase. Their less compact packing resulted in significant decrease of the specific surface area, and thus the current density. However, with the increase of film thickness, the current density showed a continuous increase in the whole thickness range up to 17 microm, indicating the improved electron diffusion length due to the formed nanowire network. The nanowires also helped to preserve crack-free thick films. These results show that employing nanoparticle/nanowire composites represents a promising approach for further improving the efficiencies of sensitized solar cells.     

Dye-sensitized nanocrystalline solar cells based on composite polymer electrolytes containing fumed silica nanoparticles

We report remarkably high energy conversion efficiency (4.5% at 100 mW cm(-2)) of a dye-sensitized solar cell in the solid state, using composite polymer electrolytes containing fumed silica nanoparticles.     

Dye-sensitized solar cells based on multiwalled carbon nanotube-titania/titania bilayer structure photoelectrode

Dye-sensitized solar cells (DSSCs) were fabricated using multiwalled carbon nanotube (MWCNT)-TiO(2) nanocomposite as a light scattering layer. Morphology of the MWCNT-TiO(2) film was investigated by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). FESEM and TEM images demonstrate that MWCNTs and TiO(2) nanoparticles can be dispersed with chitosan. Internal resistance in the DSSC was characterized by electrochemical impedance spectroscopy (EIS). EIS results reveal a decrease in the charge resistance of electrolyte/dye/MWCNT-TiO(2)/TiO(2) interface with increasing MWCNT content up to 3 wt% which leads to an improvement in the photovoltaic performance. Compare with a nanocrystalline TiO(2) single-layer cell, the DSSC based on the MWCNT (3 wt%)-TiO(2)/TiO(2) bilayer structure photoelectrode shows ~100% increase in solar-to-electric energy conversion efficiency, which is attributed to the inclusion of MWCNTs in TiO(2) matrix.     

Dye-sensitized solar cells based on two-dimensional TiO2 nanosheets as the scattering layers

Research on Chemical Intermediates - Two-dimensional (2D) TiO2 nanosheets with high crystallinity and good light scattering properties were synthesized via a simple solvothermal process using...     

Dye-sensitized solar cells based on Fe N-heterocyclic carbene photosensitizers with improved rod-like push-pull functionality

A new generation of octahedral iron(ii)–N-heterocyclic carbene (NHC) complexes, employing different tridentate C^N^C ligands, has been designed and synthesized as earth-abundant photosensitizers for dye sensitized solar cells (DSSCs) and related solar energy conversion applications. This work introduces a linearly aligned push–pull design principle that reaches from the ligand having nitrogen-based electron donors, over the Fe(ii) centre, to the ligand having an electron withdrawing carboxylic acid anchor group. A combination of spectroscopy, electrochemistry, and quantum chemical calculations demonstrate the improved molecular excited state properties in terms of a broader absorption spectrum compared to the reference complex, as well as directional charge-transfer displacement of the lowest excited state towards the semiconductor substrate in accordance with the push–pull design. Prototype DSSCs based on one of the new Fe NHC photosensitizers demonstrate a power conversion efficiency exceeding 1% already for a basic DSSC set-up using only the I⁻/I₃⁻ redox mediator and standard operating conditions, outcompeting the corresponding DSSC based on the homoleptic reference complex. Transient photovoltage measurements confirmed that adding the co-sensitizer chenodeoxycholic acid helped in improving the efficiency by increasing the electron lifetime in TiO₂. Time-resolved spectroscopy revealed spectral signatures for successful ultrafast (<100 fs) interfacial electron injection from the heteroleptic dyes to TiO₂. However, an ultrafast recombination process results in undesirable fast charge recombination from TiO₂ back to the oxidized dye, leaving only 5–10% of the initially excited dyes available to contribute to a current in the DSSC. On slower timescales, time-resolved spectroscopy also found that the recombination dynamics (longer than 40 μs) were significantly slower than the regeneration of the oxidized dye by the redox mediator (6–8 μs). Therefore it is the ultrafast recombination down to fs-timescales, between the oxidized dye and the injected electron, that remains as one of the main bottlenecks to be targeted for achieving further improved solar energy conversion efficiencies in future work.

Iron-based photosensitizers for dye-sensitized solar cells with a rod-like push–pull design. Solar cell performance was limited by ultrafast (sub-ps) recombination, but yielded better performance than the homoleptic parent photosensitizer.     

Dye-sensitized solar cells based on ordered titanate nanotube films fabricated by electrophoretic deposition method

Dye-sensitized solar cells (DSSCs) are fabricated based on ordered titanate nanotube (TNT) films obtained by electrophoretic deposition (EPD) method. Calcination temperatures show a great influence on the performance of TNT solar cells. At 300 °C, the cells exhibit very low photo-electric conversion efficiency. At 400 °C, the efficiency obviously increases. At 600 °C, the cells show the highest efficiency, which is higher than the efficiency of the cells made from commercial-grade Degussa P25 TiO₂ nanoparticles (P25).     

Dye-sensitized solar cell based on blood mimetic thixotropy sol-gel electrolyte

Blood mimetic thixotropy sol-gel electrolytes were prepared and sandwiched between dye-coated porous TiO(2) and a platinum counter-electrode to form a dye-sensitized solar cell. The highest overall conversion efficiency of 6.45%, and the fill factor of 0.74 under the white light irradiation AM 1.5 (100 mW cm(-2)) were obtained.     

Dye-sensitized solar cells employing amphiphilic poly(ethylene glycol) electrolytes

Poly(ethylene glycol) (PEG) was modified with a long alkyl acid to produce a self-organized amphiphilic polymer (amPEG). FT-IR and NMR spectroscopies confirmed the amPEG synthesis. This polymer was complexed with lithium iodide (LiI) and 1-methyl-3-propylimidazolium iodide (MPII) to prepare polymer electrolytes to be applied to dye-sensitized solar cells (DSSC). FT-IR studies showed that upon the addition of litium salt the free ether and ester carbonyl bands shifted towards lower wavenumbers, indicating the complexation of Li ions with oxygens on the amPEG. Alkylation and salt introduction reduced PEG crystallinity, as characterized by wide angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC). The ionic conductivities of the polymer electrolytes increased with increasing salt concentrations, and the energy conversion efficiency of DSSC reached 2.6% at 100 mW cm^?2 for amPEG/MPII system which is higher than amPEG/LiI. This may be due to the higher mobility of MPII ion than the lithium ion in the polymer electrolyte. The interfacial properties between electrolytes and electrodes were investigated using field-emission scanning electron microscopy (FE-SEM) and electrochemical impedance spectroscopy (EIS).     

Dye-sensitized TiO2 nanotube solar cells: fabrication and electronic characterization

TiO2 nanotubes (TNTs) with large aspect ratio and large specific surface area were prepared from P25 (Nippon Aerosil) and applied to dye-sensitized titanium dioxide solar cells (DSSCs). Optimization of fabrication conditions, i.e., pH of the starting paste, sintering temperature for the TiO2 electrodes, electrolyte compositions of DSSCs gave the high conversion efficiency with improved open circuit voltage (V(oc)) and fill factor (FF) when compared to DSSCs made of P25. The evaluation of dye adsorption and the photo-injected electron transport such as electron diffusion coefficient (D) and electron lifetime (tau) in TNTs electrodes revealed that the higher efficiency resulted from increase of electron density with keeping much longer tau in TNTs electrodes than in P25 electrodes.     

Dye-sensitized solar cells based on oriented TiO2 nanotube arrays: transport, trapping, and transfer of electrons

Dye-sensitized solar cells fabricated using ordered arrays of titania nanotubes (tube lengths 5, 10, and 20 microm) grown on titanium have been characterized by a range of experimental methods. The collection efficiency for photoinjected electrons in the cells is close to 100% under short circuit conditions, even for a 20 microm thick nanotube array. Transport, trapping, and back transfer of electrons in the nanotube cells have been studied in detail by a range of complementary experimental techniques. Analysis of the experimental results has shown that the electron diffusion length (which depends on the diffusion coefficient and lifetime of the photoinjected electrons) is of the order of 100 microm in the titania nanotube cells. This is consistent with the observation that the collection efficiency for electrons is close to 100%, even for the thickest (20 microm) nanotube films used in the study. The study revealed a substantial discrepancy between the shapes of the electron trap distributions measured experimentally using charge extraction techniques and those inferred indirectly from transient current and voltage measurements. The discrepancy is resolved by introduction of a numerical factor to account for non-ideal thermodynamic behavior of free electrons in the nanostructured titania.     

Dye-sensitized solar cells based on TiO2-B nanobelt/TiO2 nanoparticle sandwich-type photoelectrodes with controllable nanobelt length

The TiO(2)-B nanobelt (NB)/TiO(2) nanoparticle (NP) sandwich-type structure photoelectrode, with controllable nanobelt length, has been used to fabricate high-efficiency dye-sensitized solar cells (DSSCs), which combine the advantages of the rapid electron transport in TiO(2)-B NBs and the high surface area of TiO(2) NPs. The results indicate that the sandwich-type photoelectrode achieves higher photoelectrical conversion efficiency when compared with the TiO(2) nanoparticulate electrode. Increasing the length of TiO(2)-B NBs has been demonstrated to improve the photoelectric conversion efficiency (η). DSSCs with the longest (10 μm) TiO(2)-B NBs yield the highest η of 7.94%. The interfacial electron transport of DSSCs with different lengths of TiO(2)-B NBs has been quantitatively investigated using the photovoltage transient and the electrochemical impedance spectra, which demonstrates that the DSSCs with longest TiO(2)-B NBs display the highest electron collection efficiency and the fastest interfacial electron transfer.     

Toggle-switchable fluorescence of bisindolylmaleimide derivatives by reversible esterification/hydrolysis

Isomers based on the bisindolylmaleimide architecture were reported in this Letter. Introducing hydroxyl to this architecture lead to quenching the fluorescence of bisindolylmaleimide. The fluorescence was recovered with its hydroxyl group esterified. Ester group can be easily transformed to hydroxyl group by hydrolysis reaction. Thus, a toggle-switchable fluorescence, ‘off-on’ cycle can be established on the basis of reversible esterification/hydrolysis reaction.     

Fluorination strategy enables greatly improved performance for organic solar cells based on polythiophene derivatives

The power conversion efficiencies(PCEs) of organic solar cells(OSCs) have reached 18% recently,which have already met the demand of practical application.However,these outstanding results were generally achieved with donor-acceptor(D-A) type copolymer donors,which can hardly fulfill the low-cost largescale production due to their complicated synthesis processes.Therefore,developing polymer donors with simple chemical structures is urgent for realizing low-cost OSCs.Polythiophene(PT) derivatives are currently regarded as promising candidates for such kind of donor materials,which has been illustrated in many works.In this work,two new alkylthio substituted PT derivatives,P301 and P302,were synthesized and tested as donors in the OSCs using Y5 as the accepto r.In comparison,the introduction of fluorine atoms on the backbone of P302 can not only downshift the energy levels,but also greatly improve the phase separation morphologies of the active layers,which is ascribed to the enhanced aggregation effect and the reduced miscibility with the non-fullerene acceptor.As a result,the P302:Y5-based OSC exhibits a significantly improved PCE of 9.65% than that of P301:Y5-based one,indicating the important role of fluorination in the construction of efficient PT derivative donors.     

Dye-sensitized solar cells based on nanocrystalline TiO2 films surface treated with Al3+ ions: photovoltage and electron transport studies

Nanocrystalline TiO2 films, surface modified with Al3+, were manufactured by depositing a TiO2 suspension containing small amounts of aluminum nitrate or aluminum chloride onto conducting glass substrates, followed by drying, compression, and finally heating to 530 degrees C. Electrodes prepared with TiO2 nanoparticles coated with less than 0.3 wt % aluminum oxide with respect to TiO2 improved the efficiency of the dye sensitized solar cell. This amount corresponds to less than a monolayer of aluminum oxide. Thus, the Al ions terminate the TiO2 surface rather than form a distinct aluminum oxide layer. The aluminum ion surface treatment affects the solar cell in different ways: the potential of the conduction band is shifted, the electron lifetime is increased, and the electron transport is slower when aluminum ions are present between interconnected TiO2 particles.