高效毛细管电泳-电导检测对四环素衍生物分离测定的研究

运用毛细管电泳-电导检测方法对4种四环素衍生物——土霉素(OTC)、金霉素(CTC)、强力霉素(DOC)和四环素(TC)的分离进行了研究。在3．5mmol/L三羟基氨基甲烷(Tris)-7．5mmol/L柠檬酸(Cit)pH4．0的运行缓冲液中，4种四环素衍生物在15min内获得完全分离。四环素衍生物的线性范围分别为5．0-500μg/mL OTC，3．6-420μg/mL CTC，4.5-470μg/mL DOC和2.5-400μg/mL TC。检测限(S／N＝3)分别为OTC2．0μg/mL，CTC 1．8μg／mL，DOC2．5μg/mL和TC1．0μg/mL。采用本法对实际样品强力霉素片中强力霉素和土霉素片中土霉素进行测定，回收率分别为97．2％和96.4％。     

高效毛细管电泳电导法快速检测复方维生素B片中的VBl、VBl2、VB6和VC

采用高效毛细管电泳电导法同时分离、测定了复方维生素B片中的主要成分VB1，VB12，VB6和VC的含量。研究了运行缓冲溶液的酸度和浓度、电泳电压、进样时间等因素对电泳的影响。在优化的实验条件下：40mmol/L Tris-4mmol/L H3BO3(pH8．0)的缓冲溶液中加入0．30mmol/L CTAB(溴化十六烷基三甲基铵)，分离电压为15kV，上述4组分在5min内得到良好的分离。维生素B1，B12，B6和VC的线性范围分别为5．5～1．0mg/mL；15～1．5mg／mL;1．0～0．40mg／mL和6．6～0．80mg／mL；检测限分别为0．80μg/mL，4．0μg/mL，0．50μg/mL，2．9μg/mL；5次测定峰高的相对标准偏差分别为2．2％，1．6％，3．9％，2．8％。5次测定的平均回收率分别为99％，94％，l00％，97％。     

高效毛细管电泳法测定葡萄酒中的苋菜红及亮蓝

建立了高效毛细管电泳法直接分离测定葡萄酒中苋菜红及壳蓝的方法。研究了缓冲体系种类、pH值、缓冲溶液浓度及有机添加剂对分离效果的影响。确定的最佳实验条件：未涂层石英毛细管柱（50cm×75μm）,分离缓冲溶液10mmol／L柠檬酸-5mmol／L∥一环糊精（pH2．6）,检测波长220nm,电泳电压20kv,压力进样（20kPa×3s）,电泳温度为室温。该方法测定的苋菜红及亮蓝质量浓度在2-200mg／L范围内线性良好,苋菜红及亮蓝的检出限分别为0．58,0．50mg／L,线性相关系数-≥0．9994,回收率在93．9％～107．2％之间。该方法无需样品预处理,操作简便,测定准确,能满足实际样品的分析需求。     

柱切换直接进样高效液相色谱法测定蜂蜜中3种抗生素的残留量

建立了柱切换反相高效液相色谱法直接进样分离、测定蜂蜜中3种四环素族抗生素(土霉素OTC、四环素TC、金霉素CTC)残留量的分析方法。方法包括：用缓冲溶液溶解样品、直接进样、二次蒸馏水作流动相在C18预柱上在线富集和净化，然后用柱切换阀将预柱与一个C18分析柱接通，草酸溶液-乙腈-甲醇作流动相、紫外检测器在350nm处检测。各组分回收率均大于85％；相对标准偏差小于10％；标准曲线的相关系数在0．9983～0．9991之间；最低检出浓度(≤0．02mg／kg)，满足欧盟和日本等国要求(0．05mg／kg)。     

毛细管电泳高频电导法测定尿中MDMA及其代谢物

建立了尿样中MDMA及其代谢物MDA的毛细管电泳高频电导法检测分析方法。对电泳分离缓冲介质的种类、浓度、pH值以及分离操作电压和进样时间等实验条件进行了优化。缓冲液为2．5mmol／L NH4 Ac 0．5mmol／L HAc 2mmol／L SDS 10mmol／L β-CD,分离电压为15kV时,可实现较好的分离与检测。该法在2．5～80μg/mL范围内。MDMA和MDA线性相关系数r分别为0．998和0．999,检出限均为1．0μg/mL(S／N=3)。不同添加浓度水平尿样,日间和日内RSD均小于5％,回收率均在90％以上,适于法医毒物分析和临床药物监测的需要。     

毛细管电泳法分离测定芦丁、槲皮素和连翘苷

用毛细管电泳紫外检测法同时测定了芦丁、槲皮素和连翘苷，研究了各种条件的影响，得到了优化的实验条件，在20mmol/L的Na2B4O7(H3B03调节至pH8．40)-30mmol/L十二烷基硫酸钠-10％乙腈(1 9)的缓冲溶液中，分离电压为12kV时，芦丁、槲皮素和连翘苷在10min内得到了良好的分离，检测波长为254nm，芦丁、槲皮素和连翘苷分别在0．01-1．0mg/mL，0．01-1．0mg／mL和0．05-1．0mg/mL质量浓度范围内与电泳峰高呈现良好线性关系，检测下限分别为0．005mg/mL，0．005mg/mL和0．01mg／mL，应用于实际样品的测定。     

糊精介质中西酞普兰的毛细管电泳手性分离与定量测定

以糊精作为毛细管电泳手性分离选择剂,对药物西酞普兰对映体的分离进行研究。考察了糊精浓度、缓冲液体系离子强度和pH及分离电压对对映体分离的影响。在糊精7．0％（m／V）、磷酸盐80mmol／L（pH5．4）的运行缓冲液中,分离电压20kV时,西酞普兰对映体分离度达3．9,同时对拆分机理进行了初步探讨。测定S-（＋）-西酞普兰原料药中R-（-）异构体的含量,在0．05～4．00g／L浓度范围内线性关系良好,R-（-）．西酞普兰与S-（＋）-西酞普兰的检出限分别为25．3mg／L和27．3mg／L,线性相关系数均在0．9970以上;RSD低于3．2％。     

毛细管电泳法检测蜂蜜中残留的抗生素

 用毛细管电泳法对 5种常用的抗生素四环素 (TC) ,土霉素 (OTC) ,多西环素 (DOC) ,金霉素 (CTC)和氯霉素 (CP)进行了分离。研究了电泳缓冲液的 pH、不同有机试剂添加剂、温度等因素对抗生素分离的影响。实验结果表明 ,体积分数为 4%的N 甲基吗啡啉的加入可大大改善分离效果。在各自相应的浓度范围内 ,峰面积和样品浓度之间呈现良好的线性关系 ,重现性好。氯霉素的检测极限为 10 μg/L ,四环素、土霉素、多西环素为 2 0 μg/L ,金霉素为 40 μg/L(信噪比 >5 )。该方法成功地应用于蜂蜜中残留抗生素的测定 ,具有操作简单、快速方便、灵敏度及自动化程度高。     

毛细管区带电泳分离西孟坦对映异构体

以β-CD为手性选择剂,采用毛细管区带电泳成功分离了西孟坦对映异构体。考察了背景电解质中硼砂缓冲液的pH和浓度、β-CD浓度、有机添加剂甲醇含量及分离电压对手性分离的影响,建立了毛细管电泳分离西孟坦对映异构体的方法。最佳分离条件为：20mmol／L硼砂缓冲液(pH11．0,含12mmol／Lβ-CD)-甲醇(50：50,V/V);分离电压20kV。在此条件下西孟坦对映异构体可达基线分离。在25～50mg／L范围内,迁移时间的重复性(RSD)控制在1．9％之内,峰面积重复性的RSD小于4．0％,本方法可用于西孟坦对映异构体的手性分离和定量分析。     

石英芯片电泳分离检测尿中蛋白的研究

通过对缓冲体系、缓冲液浓度、酸度、乳酸钙浓度、乙胺浓度、电泳电压和进样时间的优化选择，用石英芯片电泳一紫外检测法分离了纯人白蛋白和人运铁蛋白；在75mmol／L硼酸盐（pH10．55）（含0．8mmol／L乳酸钙、1％（φ）乙胺）运行缓冲液中，上述两组分在3min内完全分离；纯人白蛋白和人运铁蛋白的线性范围分别为1．0～15．0g/L和1．0～10．0g／L；检出限（S／N=3）均为0．5g／L，应用于临床尿蛋白分离测定，并与Helena琼脂糖凝胶电泳仪电泳结果进行比较，获得一致结果。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.