Cobalt-thioalkylazoimidazole complexes: Structures, spectra and redox properties

1-Alkyl-2-{(o-thioalkyl)phenylazo}imidazole (SRaaiNR^/, 1) reacts with Co(ClO₄)₂·6H₂O to form [Co(SRaaiNR^/)₂](ClO₄)₂ (2). The single crystal X-ray structure of one of the complexes of 2 shows a tridentate chelation N(imidazole), N(azo), S(thioether) system. In the structure one of ClO₄⁻ anions shows disorder and forms an (imidazole)C–H···O(ClO₃) interaction leading to a 1-D chain. Co(OAc)₂.4H₂O and SRaaiNR^/ react in the presence of NH₄SCN (1:1:2 mole ratio) in methanol and the complex [Co(SRaaiNR^/)₂(SCN)₂] (3) has been separated. The single crystal X-ray structure determination has established the structure of the complexes in which the ligand SRaaiNR^/ acts in a bidentate N(imidazole), N(azo) chelation mode. A cyclic voltammogram shows a Co(III)/Co(II) oxidative response at 0.6–0.8 V and azo reductions. DFT computation using optimized geometry support the electronic spectral and redox properties of the complexes.     

Determination of Imidazole, 4-Methylimidazole,and 2-Methylimidazole in Cigarette Additives by Ultra-High Performance Liquid Chromatography

Ultra-high performance liquid chromatography was employed for the determination of imidazole, 4-methylimidazole, and 2-methylimidazole in cigarette additives. Following solid phase extraction and filtration, the analytes were separated using isocratic elution with 5 mmol/L acetonitrile-ammonium formate (80:20, v/v) at 0.5 mL/min. The quantification of these analytes was achieved with the external standard method on a diode-array detector at 215 nm. Baseline separation was achieved within 1.3 min. The linear dynamic ranges for imidazole, 4-methylimidazole, and 2-methylimidazole were between 0.0375 and 18.0300 mg/kg. The limits of detection for the analytes were 0.0094 mg/kg. The recoveries and the relative standard deviations at fortification levels of 0.1322 mg/kg to 1.6220 mg/kg were 95.20% to 101.93% and 0.55% to 2.54%, respectively. The method offers easy operation, rapid analysis, and accurate results, and is suitable for the determination of imidazole, 4-methylimidazole, and 2-methylimidazole in cigarette additives.     

Specific ion-molecule interactions of imidazole and 1-methylimidazole in nitrobenzene

We have studied, by conductivity measurements, the formation of hydrogenbonded complexes between imidazoles and ions in the three systems triethylammonium picrate (Et₃NHPic)+imidazole (Im), triethylammonium bromide (Et₃NHBr)+Im, and Et₃NHPic+1-methylimidazole (1-MeIm) in nitrobenzene in order to specify the importance of the two functions of the imidazole molecule, the tertiary nitrogen N₃, and the imino group N₁-H. While 1-MelIm forms only a single complex with the cationic species Et₃NH⁺, imidazole enters into specific interactions as well with the cations through its basic site N₃ and with the anions through its imino group. The complexing of the anions by imidazole, always weaker than the complexing of the cations, is more effective for Br^– than for Pic^–. Moreover, if imidazole is used as ligand, a 1:2 complex is formed between the cation and the imidazole, in which the second molecule of imidazole is bonded to the N-H group of the first by a hydrogen bond at the tertiary N atom. We did not observe a correlation between the equilibrium constants K ₁ ⁺ for the complexing of the cation Et₃NH⁺ by imidazole and pyridines (k ₁ ⁺ for pyridine, 3–4 dimethylpyridine, and imidazole are 8, 24, and 165, respectively) and the pK _a values of these ligands due to the fundamental difference in the structure of the imidazole and pyridine molecules, although both are considered as aromatic nitrogen bases.     

Bonding properties and electronic structures of glycylglycinato copper(II) complexes. Molecular structure of acetylhistaminegly-cylglycinatocopper(II) dihydrate

Summary Mixed ligand diglycinatocopper(II) complexes of the Cu(glygly)L·nH₂O type, where glygly stands for [NH₂-CH₂ CONCH₂CO₂]^2– and L for imidazole (n = 1.5), N-methylimidazole (n = 1), 2-methylimidazole (n = 2), 4-methylimidazole (n = 2), 4-phenylimidazole (n = 2), N-acetylhistamine (n = 2) and NH₃ (n = 2), were prepared and characterized by elemental analyses, i.r., vis. and e.p.r. spectroscopic measurements. The molecular structure of [Cu(glygly)(achmH)]·2H₂O (achmH = acetylhistamine) was determined using three dimensional XRD data. The structure consists of distorted square planar [Cu(glygly)-(achmH)] units interconnected via the peptide oxygen at the apex to complete a square pyramidal structure, Cu—O-(peptide) 2.477(2) Å. The H₂O molecules, not binding directly to the copper ion, involve in intermolecular hydrogen bonding with the copper units. The dianionic glygly ligand and the imidazole ring bind strongly to the central copper ion with Cu—N(amino) 2.045(6) Å, Cu—N-(peptide) 1.891(5) Å, Cu—O(carboxylate) 2.001(4) Å and Cu—N(imidazole) 1.956(5) Å. The dihedral angle between the imidazole nucleus and the CuN₃O xy plane is 6.0°. Similar structures with a CuN₃O coordination plane are proposed for the imidazole complexes, based on spectroscopic data. The bonding properties of the glygly ligand and the unidentate imidazole ligands are elucidated and discussed with reference to the electronic structures of the complexes deduced from Gaussian analyses.     

Bonding properties of copper(II)—N chromophores: Preparation,structure, and spectroscopic properties of ethylenediaminecopper(II) complexes. Molecular structure of [Cu(ethylenediamine)(pyridine)2(ClO4)2]

Summary Ethylenediaminecopper(II) perchlorate complexes of the [Cu(ethylenediamine)L₂(ClO₄)₂] type, where L = imidazole, N-methylimidazole, 2-methylimidazole, 4-methylimidazole, and pyridine, have been prepared and characterized by elemental analyses, and electronic, vibrational, and e.p.r. spectroscopic measurements. The molecular structure of [Cu(ethylenediamine)(pyridine)₂(ClO₄)₂] has been determined by three-dimensional X-ray diffraction data. The Cu^II ion is coordinated by one ethylenediamine and two pyridine ligands forming an equatorial plane, and by two perchlorate anions located on the z axis. The pyridine ligands incline at 54.9 ° to the CuN₄ plane suggesting virtually no -interaction in the complex. Similar structures with a CuN₄ coordination plane are proposed for other complexes based on the spectroscopic data. The bonding properties of these complexes are elucidated and discussed with reference to the electronic structures deduced from Gaussian analyses of their LF spectra.     

Zinc(II) (o-hydroxybenzaldoximates) Complexes with Mono- and Bidentate Ligands

New complexes:Zn(Hsalox)(ox), Zn(Hsalox)(NHPh), Zn(Hsalox)(Hsal) and Zn(Hsalox)₂(1,2-diMeim) have been synthesised as a result of a reaction of Zn(salox) and Zn(Hsalox)₂ (where: salox ^2–=OC₆H₄CHNO^2–, Hsalox ^–=OC₆H₄CHNOH^–) with 8-hydroxyquinoline (Hox), o-aminophenol (NH₂Ph), o-hydroxybenzoic acid (H₂Sal) and 1,2-dimethylimidazole (1,2-diMeim). Chemical, X-ray and thermal analyses of the complexes and their sinters have been carried out. Thermal decomposition pathways have been postulated for the complexes. The mixtures about not definite composition have been obtained as a result of a reaction of zinc(o-hydroxybenzaldoximates) with imidazole(Him) and 4-methylimidazole (4-MeHim). This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis and structures of platinum(II) mixed ligand complexes with purine or piyrimidine bases of DNA and imidazole derivatives. Part 2

Summary Platinum(II) mixed ligand complexes with either purine or pyrimidine and imidazole derivatives were prepared and characterized by i.r., Raman and electronic spectroscopy. The compounds had the general formula [PtL¹L²Cl₂], where L¹ = adenine, guanine, hypoxanthine, cytosine, 2-aminopyrimidine; L² =N-methylimidazole,N-ethyl-imidazole orN-propylimidazole. The platinum(II) complexes had a square planar structure withcis-halogens. Purine or pyrimidine and imidazole derivatived bases acted as monodentate ligands coordinated via the N(7) of purine and N(3) of pyrimidine and imidazole derivatives.     

Coordination compounds of imidazoles with rhodium halides

Summary Compounds of the types [RhL₆](BF₄)₃, [RhL₅X](BF₄)₂ (L=1-methylimidazole), [RhL₄X₂]X (L=1-methylimidazole, 1-nbutylimidazole, 1-vinylimidazole, 1-vinyl-2-methylimidazole, 2-methylimidazole, 2-ethylimidazole, 2-isopropylimidazole, 2-ethyl-4(5)-methylimidazole; X=Cl or Br) and [RhL₄X₂]BF₄ (L = 1-n-butylimidazole, 1-vinylimidazole, 1-vinyl-2-methylimidazole, 2-ethylimidazole, 2-isopropylimidazole and 1,2-dimethylimidazole) have been prepared and characterized by conductivity measurements, i.r. and¹H n.m.r. spectral studies. Analytical data agree with the monodentate nature of the ligands while a strongv(Rh-X) frequency reveals that the halogens aretrans to each other. The compounds also reveal d-d transition bands atca. 24000–22000 cm^–1 in the visible region.     

Substituted imidazole complexes of platinum(IV) halides

Platinum(IV) halides formed complexes of the type PtL₂X₄ [L=1-vinyl imidazole (1,-VIm), 1-methylimidazole (1-MeIm), 1,2-dimethylimidazole (1,2-Me₂Im), 1-vinyl-2-methylimidazole (1-V-2-MeIm), 2-methylimidazole (2-MeIm), 2-ethylimidazole (2-EtIm), 2-isopropylimidazole (2-i-PrIm), and 4-methylimidazole (4-MeIm); X=Cl, Br] in neutral aqueous solution. The 1-n-butylimidazole (1-n-BuIm) ligand yielded only (LH)₂PtX₆ compound in the same medium. The compounds were characterised by elemental analyses, IR, UV-VIS and ¹HNMR spectra.     

Effect of solvent on the reactions of coordination complexes part VII: Kinetics of solvolysis of cis-(bromo) (imidazole) bis-(ethylenediamine)cobalt (III) and cis-(bromo) (N-methyl imidazole)bis-(ethylenediamine) cobalt(III) in methanol-water media

The kinetics of the solvolytic aquation of cis-(Bromo) (imidazole) bis(ethylenediamine) cobalt (III) and cis-(Bromo) (N-methylimidazole) bis(ethylenediamine) cobalt(III) have been investigated in aqueous methanol media with methanol content 0–80% by weight and at temperatures 40–55°C. The pseudo-first order rate constant decreases with increasing methanol content. Plots of log k vs. D (where D_s is the bulk-dielectric constant of the solvent mixture) and log k vs. the Grunwald-Winstein Y-solvent parameter are nonlinear, the curvature of the plots is relatively more significant for the imidazole complex. The plots of log k vs. molfraction of methanol (X_MeOH) for both the substrates also deviate from linearity, the deviation being less and less marked, particularly for the N-methyl imidazole complex, as the temperature is increased. Hence preferential solvation phenomenon appears to be less significant when the N-H proton of imidazole is replaced by -CH₃ group. The plots of calculated values of the transfer free energy of the dissociative transition state, cis-{[(en)₂Co(B)]³⁺}* (B = imidazole, N-methylimidazole), relative to that of the initial state, cis-[Co(en)₂(B)Br]²⁺, for the transfer of the ions from water to the mixed solvent, against X_MeOH exhibit maxima at X_MeOH = 0.06, 0.27, and 0.12, 0.36 and minima at X_MeOH = 0.12 and 0.19 for cis-[(en)₂Co(imH)Br]²⁺ and its N-methylimidazole analogue respectively which are in keeping with the solvent structural changes around the initial state and transition state of these substrates as the solvent composition is varied. Plots of activation enthalpy and entropy against molfraction of the solvent mixtures exhibit maxima and minima. This type of variations of the activation parameters, ΔH^≠ and ΔS^≠, with X_MeOH speaks of the enthalpy and entropy changes associated with the solvent-shell reorganization of the complex ions both in the initial and in the transition states which contribute appreciably to the overall activation enthalpy and entropy of the aquation reaction.     

Addition von Acetylendicarbonsäuredimethylester an Imidazole; Aminierung der Addukte: neue Synthesen von 3-(2-Imidazolyl)-2-pyridon-4,5-dicarbonsäureamiden und Pyrido[1,2-a]pyrazinen

The reaction between dimethyl acetylene dicarboxylate and 2-amino-1-methylimidazole affords dimethyl 2-amino-1-methyl-1,3-diazepine-5,6-dicarboxylate in low yield. This 1:1 – adduct was formed by addition of the acetylenic compound to the enamine double bond of the imidazole ring followed by ring enlargement. On the other hand, 2:1 – adducts to the imine bond are isolated in moderate yield when dimethyl acetylene dicarboxylate is treated with either 1-methyl-2-methylmercapto-imidazole or 1-methyl-2-methylmercapto-imidazoline. These adducts behave differently on heating with ethylamine: the adduct of the imidazole series cyclizes to the pyridone 15 with concomittant loss of one carboxamide group whereas that of the imidazoline series forms a pyrido[1,2-a]pyrazine derivative 20 , both in high yield. The possible reaction mechanisms are discussed. ¹³C–NMR.-spectroscopy and X-ray analysis were used in the determination of several structures.     

A pilot study for the production of a certified reference material for trace elements in honey

In the context of the general mandate of the European Union Community Reference Laboratory (CRL) for residues in living animals and their products established at the Istituto Superiore di Sanità, a pilot study was undertaken to assess the possibility of producing a new certified reference material (CRM) for trace elements in a matrix of honey. The elements considered were As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sn, V and Zn. Their determination was performed by inductively coupled plasma (ICP)-based techniques. Data obtained with different ICP techniques were generally in good agreement. In light of these results, the next step was the effective production of a candidate CRM in a honey matrix. In the preliminary phase, two different types of honey, i.e., Eucalyptus (solid and sticky) and Robinia (viscous and sticky), were pretreated at the Institute for Reference Materials and Measurements, Joint Research Centre, European Commission (EC-JRC-IRMM) in order to produce the materials candidate for the certification process. Approximately 600 ampoules were thus produced for the Robinia honey and 450 ampoules for the Eucalyptus honey, each ampoule containing 5 g of an aqueous solution of honey (with 20% and 30% high purity water, respectively) and sealed under inert gas (Ar). A ring test to determine the levels of the chemical elements and a long-term study to evaluate the stability of the samples is in progress. Tentative figures for the analytes of interest are (in ng g⁻¹): Robinia, As, 1.28±0.09; Cd, 0.59±0.08; Cr, 2.36±0.21; Cu, 57.6±3.2; Fe, 209±9; Mn, 90.8±3; Ni, 18.1±0.6; Pb, 23±1.5; Sn, 8.10±0.35; V, 1.19±0.37; and Zn, 178±4; Eucalyptus, As, 3.18±0.21; Cd, 0.70±0.08; Cr, 2.73±0.22; Cu, 141±6; Fe, 926±16; Mn, 1905±81; Ni, 7.77±0.4; Pb, 138±4; Sn, 7.97±0.16; V, 3.47±0.15; and Zn, 405±9.     

Spectrofluorometric study of 1,4-diaminoanthraquinone-calcium complex in aqueous sulfuric acid mediums: Spectrofluorometric determination of calcium

The spectrofluorometric study was made of the complex 1,4-diaminoanthraquinone-Ca in aqueous sulfuric mediums [λ_max,ex = 410 nm; λ_max,em = 580 nm; 50% H₂O; stable for at least 4 hr; range temperature OPTIMUM = 20–35 °C; [R]_optimum = 2 × 10⁻⁴M; stoichiometry 2:1 (fluorescent complex) and 1:1 (no fluorescent complex)]. A new method for the spectrofluorometric determination of Ca traces is proposed for concentrations between 150 and 400 ppb. The relative error and the interferences of the method have been investigated.     

Development and validation of a novel HPLC/ELSD method for the direct determination of tobramycin in pharmaceuticals,plasma, and urine

A novel method for the direct determination of the aminoglycoside tobramycin was developed and validated based on reversed-phase high-performance liquid chromatography (RP-HPLC) with evaporative light scattering detector (ELSD). Using a Waters ODS-2 C18 Spherisorb column with an evaporation temperature of 45°C and nitrogen pressure of 3.5 bar, the selected mobile phase consisted of water/acetonitrile 55:45 containing 1.5 mL L^–1 HFBA (11.6 mM) in an isocratic mode at a rate of 1.0 mL min^–1. Tobramycins retention time was 4.3 min with an asymmetry factor of 1.7. A logarithmic calibration curve was obtained from 1 to 38 g mL^–1 (r > 0.9998). LOD was 0.3 g mL^–1; within-day %RSD was 1.0 (n = 3, 4.7 g mL^–1) and between-day %RSD was 1.1 (3 days within a week). The developed method was applied to the determination of tobramycin in a pharmaceutical crude substance and formulations (eye drops and ointments). Dilution experiments revealed the absence of interference from excipients (no constant and proportional errors); recovery from spiked samples was 99–103% with %RSD < 2.2 (n = 3×3). The developed HPLC/ELSD method was also found to be applicable in the determination of tobramycin in human plasma (0.6–12.5 g mL^–1) and urine (1.5–12.5 g mL^–1) after solid-phase extraction using carboxylate cartridges followed by solvent evaporation (×2 preconcentration). A mean recovery of 86% for plasma and 91% for urine was obtained.     

Individual and simultaneous fluorimetric determination of glycine and cysteine by flow injection analysis

A dual-channel flow injection configuration is proposed for individual and simultaneous determinations of glycine and cysteine (based on their reaction with phthaldialdehyde) in the range 1 × 10⁻⁷ – 1.5 × 10⁻⁵ M, with relative standard deviations of ± 1.7 and ± 1.3%, respectively, and a sampling frequency of 75–80 hr⁻¹ for both analytes. The inclusion of a selecting valve in the configuration allows the simultaneous determination of these analytes in the concentration range achieved in their individual determinations. The resolution of mixtures is feasible with average errors of ± 2.2%.     

Computer automation of polarographic analyzer PAR 384B and development of specific implementation software

The automation of Polarographic Analyzer PAR 384B by connecting it to an HP 9816S Technical Computer is presented. The connection itself transforms an analytically oriented instrument towards one which is more appropriate for research work. Specific implementation software is developed in order to enable and facilitate pseudopolarographic measurements and evaluation of heavy-metal complexation phenomena. As as example, the procedure for the simultaneous determination of the stability constants of lead and cadmium present in constant ionic strength medium of X mol/dm³ NaCl + (4 − X) mol/dm³ NaClO₄ is presented. The results obtained, for lead, β₁ = 9±1, β₂ = 92±13, β₃ = 99±21, β₄ = 27±6, and for cadmium, β₁ = 44±3, β₂ = 194±36, β₃ = 816±67, β₄ = 68±24, are in agreement with the literature data.     

Rapid analysis of cation-exchangeable property in acidic soil : III. Sensitive spectrophotometric determination of microgram amounts of exchangeable magnesium with xylidyl Blue I in the presence of cetyltrimethylammonium bromide (CTAB)

A simple and sensitive procedure for Spectrophotometric determination of exchangeable magnesium has been developed. At 0.15 – 0.375 N ammonia, magnesium reacts with xylidyl Blue I in the presence of CTAB to form a colored ternary complex, which has an absorption maximum at 524 nm. The molar absorption coefficient is 2.2 × 10⁴ liters · mol⁻¹ · cm⁻¹. The Beer rule will be valid for concentrations from 0 to 8 μg/20 ml magnesium. The method has been used for rapid determination of microgram amounts of exchangeable magnesium in acidic soil with good reproducibility.     

Extraction and spectrophotometric determination of trace amounts of niobium with diphenylglioxal-bis-(2-hydroxybenzoylhydrazone)

A method is described for the direct spectrophotometric determination of microamounts of niobium based on its extraction into chloroform with dephenylglyoxal-bis-(2-hydroxy benzoyl) hydrazone (BSHB). This reagent builds up a chelate with Nb(V) in very acidic media, its chloroform solution being pink to reddish depending on niobium concentration (λ_max = 495 nm). Optimum conditions for chelate extraction and niobium determination have been established. The precision of procedure proposed, expressed in terms of relative standard deviation, is ±1.0%.It is shown that the method is sensitive, the molar absorptivity being 1.95 ± 0.02 × 10⁴ liter · mol⁻¹ · cm⁻¹ in the organic phase, and the interferences study demonstrates a high selectivity against common cations and the majority of those accompanying niobium in its natural sources and special alloys.     

Synthesis,molecular structure and electrochemistry of cobalt(II) complexes of 2,2′: 6′,2′′-terpyridine macrocycles

The macrocycle L, prepared by template condensation of bis-6,6′′-(α-methylhidrazino)-4′-phenyl-2,2′:6′′,2′-terpyridine with glyoxal, forms a stable crystalline complex of cobalt(II) [Co(L)(H₂O)₂][PF₆]₂ which has been used as a starting material to prepare, for electrochemical studies, a series of seven coordinate cobalt(II) complexes [Co(L)X₂][PF₆]₂ (X=pyridine, 4-cianopyridine, 4-aminopyridine, 4-dimethylaminopyridine, pirazine, imidazole, 1-methylimidazole, 2-methylimidazole, and trimethylphosphite). Cyclic voltammetry of the aquo complex in DMSO show one reversible reduction wave at −1.35 V versus Ag ∣ AgBF₄ reference electrode and controlled potential electrolysis in the presence of trimethylphosphite affords a diamagnetic species which has been assigned as a mononuclear d⁸ Co(I) species. The crystal and molecular structure of [Co(L)(imidazole)₂][PF₆]₂·Me₂CO shows the metal to be in a pentagonal-bipyramidal N₇ environment.     

Three copper(II) complexes of thiophene-2,5-dicarboxylic acid with dissimilar ligands: Synthesis, IR and UV–Vis spectra, thermal properties and structural characterizations

Three thiophene-2,5-dicarboxylic acid (H₂tdc) complexes of copper(II) with 2-aminomethylpyridine (ampy), {[Cu₂(μ-tdc)₂(ampy)₂]·2DMF}_n (1), ethylenediamine (en), trans-[Cu(H₂O)₂(en)₂](tdc) (2) and 4-methylimidazole (4-meim), trans-[Cu(H₂O)₂(4-meim)₄](tdc)·4H₂O (3) have been synthesized and characterized by spectral (IR, UV–Vis), thermal analyses and X-ray diffraction techniques. In 1, thiophene-2,5-dicarboxylate acts as a bridging bis(bidentate) ligand through four carboxylate oxygen atoms forming a 1-D zigzag polymeric chain, whereas in 2 and 3 the tdc dianion behaves as a counter ion. In all cases, the Cu(II) centers have an octahedral coordination geometry. Three-dimensional frameworks are constructed though hydrogen bonding and/or C–H···π interactions in the three complexes.