(Li,Ca,A)_2SiO_4:Eu,Bi发光体的合成和发光性能的研究(A=Al,Y,La,Gd)

为了寻找新的发光基质材料,用高温固相反应合成了(Li,Ca,A)_2SiO_4:Eu,Bi系列发光体(A=Al,Y,La,Gd).通过激发光谱和发射光谱的测试.首次在碱土金属硅酸盐体系中研究了Al,Y,La,Gd等三价金属离子对Bi~(3+)、Eu~(3+)发光特性和Bi~(3+)敏化Eu~(3+)发光性能的影响,得到了良好的基质组成.实验结果表明.基质中适当含量的Gd~(3+)可大幅度提高Eu~(3+)的发光强度,使~5D_0-~7F_2发射强度增加6倍.Bi~(3+)对Eu~(3+)有很好的敏化作用,以A=Gd或Al时较好,对~5D_0-~7F_1辐射跃迁的敏化效果尤为突出.     

CaSb2O6:Bi3+,Eu3+荧光粉的制备和发光性质

采用共沉淀法及1 200 ℃后续煅烧4 h,成功制备了CaSb₂O₆:Bi³⁺,Eu³⁺荧光粉,并对其结构及发光性能进行了研究。所制备荧光粉颗粒为六边形类圆饼状,平均尺寸在100~600 nm之间。对CaSb₂O₆:Bi³⁺,Eu³⁺发光的机理分析表明,Bi³⁺对Eu³⁺的发光存在高效的敏化与能量传递。当Bi³⁺和Eu³⁺的掺杂浓度分别为0.5%和8%,Eu³⁺位于580 nm(⁵D₀→⁷F₀ )处的荧光发射显著增强,Bi³⁺,Eu³⁺共掺样品的荧光强度是CaSb₂O₆:Eu³⁺的10倍左右。调节Bi³⁺/Eu³⁺离子掺杂比,色坐标呈现了从蓝、白光到红光的变化,表明该荧光粉可分别作为蓝或红色荧光粉使用,甚至可实现从蓝、白光到红光的自由调控,这为白光LED荧光粉的发展提供了参考。     

(Y，Gd)VO4∶Eu3+的紫外-真空紫外发光特性

用高温固相法合成了Y_1-xGd_xVO₄∶Eu³⁺(0≤x≤1)系列单相样品并研究了其发光特性。在254 nm激发下，观察到最大强度位于619 nm的红色发射峰且其强度在Y/Gd=0.4/0.6时达到最大。在147 nm激发下的发射峰与紫外下的一致，发射强度也是在Y/Gd=0.4/0.6时达到最大，大约是商用(Y，Gd)BO₃∶Eu³⁺     

氯化二(羟胺根)·(羟胺—O)·水合氧钒(Ⅴ)[VO·(NH2O)2·(NH3O)·H2O]Cl的晶体结构

调节硫酸氧钒与盐酸羟胺溶液至pH～4制得的题目晶体属空间群P2₁/n,晶胞参数a=8.201,b=8.597,c=9.947A,β=93.00°,Z=4.结构解出精修后R因子为0.069.结果表明,不对称单位中二个羟胺根以侧接态与VO³⁺配位,另一羟胺取端接态以O占据V的第五赤道配位位置,配位水处于氧钒基强键反位,Cl^-则在配阳离子界外以平衡电荷,晶体对的化学式确证为[(VO³⁺)(NH₂O^-)₂(NH₃O)(H₂O)][Cl^-]     

CaSb2O6:Bi3+,Eu3+荧光粉的制备和发光性质

采用共沉淀法及1 200 ℃后续煅烧4 h,成功制备了CaSb₂O₆:Bi³⁺,Eu³⁺荧光粉,并对其结构及发光性能进行了研究。所制备荧光粉颗粒为六边形类圆饼状,平均尺寸在100~600 nm之间。对CaSb₂O₆:Bi³⁺,Eu³⁺发光的机理分析表明,Bi³⁺对Eu³⁺的发光存在高效的敏化与能量传递。当Bi³⁺和Eu³⁺的掺杂浓度分别为0.5%和8%,Eu³⁺位于580 nm(⁵D₀→⁷F₀ )处的荧光发射显著增强,Bi³⁺,Eu³⁺共掺样品的荧光强度是CaSb₂O₆:Eu³⁺的10倍左右。调节Bi³⁺/Eu³⁺离子掺杂比,色坐标呈现了从蓝、白光到红光的变化,表明该荧光粉可分别作为蓝或红色荧光粉使用,甚至可实现从蓝、白光到红光的自由调控,这为白光LED荧光粉的发展提供了参考。     

稀土红色荧光粉SrZnO2∶Eu3+的发光性能

A series of novel luminescent materials, SrZnO₂∶M (M=Eu³⁺, or Eu³⁺ + Li⁺) have been synthesized by high-temperature solid-state reaction. The structure and luminescence properties of SrZnO₂∶Eu³⁺ phosphor were studied through XRD, photoluminescence and Raman spectroscopy. The excitation spectra show a broad intense band and a number of small peaks corresponding to the inner 4f-shell excitations of Eu³⁺ (the strongest one is at 395 nm for ⁷F₀-⁵L₆). After SrZnO₂∶Eu³⁺ phosphor was co-doped with Li⁺ ions, its charge transfer band extended to longer wavelengths. This resulted in increase of luminescent quantum efficiency of the sample. SrZnO₂∶Eu³⁺,Li⁺ phosphor can be efficiently excited by longer UV. From the fluorescence spectrum of SrZnO₂∶Eu³⁺ phosphor, apart from transition emissions of ⁵D₀→ ⁷F_J (J=0～4), the transition emissions from ⁵D₁ → ⁷F_J (J=0～2) have been observed. For the SrZnO₂∶Eu³⁺ phosphor, under excitation of UV, the dominant emission is at about 612 nm, due to the ⁵D₀→ ⁷F₂ hypersensitive transition. The incorporation of Li⁺ ions greatly enhanced the luminescence intensity and made emission peak from ⁵D₀ → ⁷F₂ transition red-shifted.     

稀土Y2-xSiO5∶Eux3+纳米发光材料结构对发光性能影响及发光机理研究

用溶胶凝胶法合成了Y_2-xSiO₅∶Eu_x纳米发光材料，使用XRD、FTIR和TEM对其结构进行了表征。讨论了相结构、煅烧温度和Eu³⁺掺杂浓度对材料发光性能的影响及规律。结果显示煅烧温度在900 ℃以下，材料主要呈非晶相结构，900 ℃以上材料主要呈晶态结构；颗粒随煅烧温度升高而增大，在非晶态时颗粒大小在15～45 nm，在晶态时颗粒大小为60～80 nm。激发光谱和荧光发射光谱受材料晶相结构以及Eu³⁺掺杂浓度的影响，在晶态结构中Y_2-xSiO₅∶Eu_x纳米材料呈现更精细的激发和发射光谱。在激发光谱中，电荷转移态吸收(CST)随煅烧温度升高呈现兰移现象，晶态时CST同非晶态相比明显红移；在发射光谱中，非晶态时 ⁵D₀→ ⁷F₂跃迁呈现强的发光峰，随材料制备温度升高而增强，在晶态时该发光峰强度减弱，在长波波段呈现两个新的发光尖峰，并随煅烧温度升高而增强； ⁵D₀→ ⁷F₁发射峰从非晶态转变为晶态后，光谱裂分为三重尖峰；而 ⁵D₀→ ⁷F₀跃迁发光光谱受结构和颗粒大小影响较小。同时在60～80 nm的Y_2-xSiO₅∶Eu_x晶体中，发现材料 ⁵D₀→ ⁷F₂和 ⁵D₀→ ⁷F₁跃迁发光强度，均受Eu³⁺掺杂浓度的影响，当掺杂浓度x=0.4时，材料发光强度最大。     

钙钛矿结构荧光材料MZrO3:Eu3+,A (M=Ca2+, Ba2+; A=Li+, Na+, K+)的制备及其发光性质

Calcium and barium zirconate powders based upon CaZrO₃:Eu³⁺,A and BaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) were prepared by combustion synthesis method and heating to ~1000℃ to improve crystallinity.The structure and morphology of materials were examined by X-ray diffraction (XRD) and scanningelectron microscopy (SEM). XRD results showed that CaZrO₃:Eu³⁺,A and BaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) perovskites possessed orthorhombic and cubic structures, respectively. The morphologies of all powderswere very similar consisting of small, coagulated, cubical particles with narrow size distributions andsmooth and regular surfaces. The characteristic luminescences of Eu³⁺ ions in CaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) lattices were present with strong emissions at 614 and 625 nm for ⁵D₀→⁷F₂ transitions with other weakeremissions observed at 575, 592, 655, and 701 nm corresponding to ⁵D₀→⁷F_n transitions (where n=0, 1, 3, 4 respectively). In BaZrO₃:Eu³⁺ both the ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transitions at 595 and 613 nm were strong.Photoluminescence intensities of CaZrO₃:Eu³⁺ samples were higher than those of BaZrO₃:Eu³⁺ lattices. Thisremarkable increase of photoluminescence intensity (corresponding to ⁵D₀→⁷F_n transitions) was observedin CaZrO₃:Eu³⁺ and BaZrO₃:Eu³⁺ if co-doped with Li⁺ ions. An additional broad band composed of manypeaks between 440 to 575 nm was observed in BaZrO₃:Eu³⁺,,A samples. The intensity of this band wasgreatest in Li⁺ co-doped samples and lowest for K⁺ doped samples.     

LnBaB9O16︰Pr3+(Ln=La,Y)中Pr3+的双光子发射

在216nm紫外光激发下, LnBaB₉O₁₆︰Pr³⁺中的Pr³⁺离子可以发生双光子发射;稀土离子在LnBaB₉O₁₆中处于非中心对称格位,Pr³⁺离子的4f5d能态高于¹S₀能级,可以发生从¹S₀能级到中间能态及基态的双光子跃迁发射;LaBaB₉O₁₆中与稀土离子近邻的硼酸根离子为BO₄,相应的B—O振动频率较低,³S₀与¹D₂之间的无辐射跃迁几率比较小,可以出现从³S₀能级的发射.在YBaB₉O₁₆中,Pr³⁺的4f5d能态低于¹S₀能级,不能发生双光子发射.     

希土硼氢化物的研究 Ⅹ.含[B10H9NH2COCH=CH2]-的双苯甲酰丙酮缩1,3-丙二胺希土(Ⅲ)配合物的研究

将闭式+氢+硼酸阴离子酰胺衍生物[B₁₀H₉NH₂COCH=CH₂]^-、双苯甲酰丙酮缩1,3-丙二胺C₆H₅C(OH)=CHC(CH₃)=N(CH₃)CH=C(OH)C₆H₅(Bapn)及希土氯化物在丙酮-乙醇混合溶剂中进行反应,得到分子式为Ln(Bapn)₃[B₁₀H₉NH₂COCH=CH₂]₃(Ln=La,Nd,Sm,Eu,Gd,Dy)的混式配体希土配合物。通过元素分析、IR、¹H NMR及摩尔电导率的测定对配合物进行了表征,还通过DTA-TG方法研究了它们的热性质。     

Zur Trennung von H2, O2, N2, NO, CO, N2O, CO2, C2H6, C2H4, C2H2, NO2(N2O4) und Feuchtigkeit

Ohne Zusammenfassung     

Theoretical study of polyoxide clusters B20O30, Al20O30, V20O50, Si20O30H20, and Si20O30F20

The structural, electronic, and vibrational characteristics and energies of the isolated polyoxide clusters B₂₀O₃₀, Al₂₀O₃₀, V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀ and their complexes with the H⁻ ion and ammonia complexes Al₂₀O₃₀ · nNH₃ have been calculated by the density functional theory B3LYP method with different basis sets. The computation results show that the symmetric closo structure I _h with oxygen bridges located above the centers of the faces of an empty [M₂₀] dodecahedron is more favorable for V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀. For B₂₀O₃₀, the cage closo isomer is also more favorable than the other isomers, but its structure is severely distorted as compared to a dodecahedron and has a symmetry close to C ₃ . For Al₂₀O₃₀, the I _h structure corresponds to a high-lying local minimum of the potential energy surface. For Al₂₀O₃₀, a set of unusual puckshaped isomers of symmetry C _i , with different numbers of four-coordinate atoms ^IVAl and three-coordinate atoms ^IIIO, was localized; these structures are more than 90 kcal/mol more favorable than the dodecahedron I _h . The most favorable isomer of Al₂₀O₃₀ contains twelve four-coordinate atoms ^IVAl and four five-coordinate atoms ^VAl. The energies of dissociation of the most favorable M₂₀O₃₀ clusters into the M₂O₃ (C _2v ) and M₄O₆ (T _d ) fragments and, in the case of Al₂₀O₃₀, also into the Al₈O₁₂ (O _h ) and Al₁₂O₁₈ (D _3d ) fragments, have been estimated. The conclusion has been drawn that these clusters can, in principle, exist and can be experimentally detected in the isolated state. Analogous calculations have been performed for ammonia complexes Al₂₀O₃₀ · nNH₃ with n varying from 1 to 20. The effect of solvation on the relative stability of the dodecahedral and puckshaped isomers of the Al₂₀O₃₀ cluster is observed. The isomers with ammonia molecules in their first coordination sphere become much closer to one another on the energy scale; however, the dodecahedron remains a considerably less favorable intermediate. Original Russian Text ? O.P. Charkin, N.M. Klimenko, D.O. Charkin, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 4, pp. 624–635.     

Syntheses, structures, optical properties, and theoretical calculations of Cs2Bi2ZnS5, Cs2Bi2CdS5, and Cs2Bi2MnS5

Three new compounds, Cs₂Bi₂ZnS₅, Cs₂Bi₂CdS₅, and Cs₂Bi₂MnS₅, have been synthesized from the respective elements and a reactive flux Cs₂S₃ at 973 K. The compounds are isostructural and crystallize in a new structure type in space group Pnma of the orthorhombic system with four formula units in cells of dimensions at 153 K of a=15.763(3), b=4.0965(9), c=18.197(4) Å, V=1175.0(4) Å³ for Cs₂Bi₂ZnS₅; a=15.817(2), b=4.1782(6), c=18.473(3)  Å, V=1220.8(3)  ų for Cs₂Bi₂CdS₅; and a=15.830(2), b=4.1515(5), c=18.372(2) Å, V=1207.4(2) Å³ for Cs₂Bi₂MnS₅. The structure is composed of two-dimensional _∞²[Bi₂MS₅²⁻] (M=Zn, Cd, Mn) layers that stack perpendicular to the [100] axis and are separated by Cs⁺ cations. The layers consist of edge-sharing _∞¹[Bi₂S₆⁶⁻] and _∞¹[MS₃⁴⁻] chains built from BiS₆ octahedral and MS₄ tetrahedral units. Two crystallographically unique Cs atoms are coordinated to S atoms in octahedral and monocapped trigonal prismatic environments. The structure of Cs₂Bi₂MS₅, is related to that of Na₂ZrCu₂S₄ and those of the AMM′Q₃ materials (A=alkali metal, M=rare-earth or Group 4 element, M′= Group 11 or 12 element, Q=chalcogen). First-principles theoretical calculations indicate that Cs₂Bi₂ZnS₅ and Cs₂Bi₂CdS₅ are semiconductors with indirect band gaps of 1.85 and 1.75 eV, respectively. The experimental band gap for Cs₂Bi₂CdS₅ is ≈1.7 eV, as derived from its optical absorption spectrum.     

Ionization gauge sensitivities of N2, O2, N2O, NO, NO2, NH3, CClF3 and CH3OH

A Bayard-Alpert (BA) gauge was used to determine apparent relative sensitivites S_rel,X for O₂, N₂O, NO, NO₂, NH₃, CClF₃ and CH₃OH from gauge calibration measurements in the range 1.3×10^–1 Pap1.3·10^–3Pa. Nitrogen was used as a calibration standard.     

Lithium intercalation into PbNb2S5, PbNbS3, SnNb2Se5, BiVS3, SnVSe3, and PbNb2Se5 misfit layer chalcogenides

The intercalation of lithium into various misfit layer chalcogenides of two different stoichiometries was performed by using n-butyl lithium on powders. The reaction was found to proceed topochemically, and a greater expansion in the c direction and higher lithium contents were observed in the lithiated phases with “MM′₂X₅” approximate stoichiometries compared to “MM′X₃” stoichiometries. This behaviour difference is assigned to the different stacking sequence of the slices of the two sublattices formed by double layers of MX and sandwiches of M′X₂. Lattice distortions are induced during lithiation, leading to changes in the relative orientation of MS-type bilayers and to complete amorphization after long reaction times. The synthesis and partial characterization of a new misfit layer selenide of nominal composition “PbNb₂Se₅” is also reported. The value of the c-dimension (c = 37.3₇ Å) suggests a stacking sequence PbSe---NbSe₂---NbSe₂---PbSe---NbSe₂---NbSe₂, etc. This material becomes highly unstable on lithium intercalation and decomposes to its constituents after a few hours of lithiation.     

Singlet-triplet energy separation in divalent seven-membered cyclic conjugated compounds C6H6C, C6H6Si, C6H6Ge, C6H6Sn, and C6H6Pb

The electronic and thermal energy differences, ΔE(t-s); enthalpy differences, ΔH(t-s); and free energy differences between the singlet and triplet states, ΔG(t-s), were calculated for C₆H₆C, C₆H₆Si, C₆H₆Ge, C₆H₆Sn, and C₆H₆Pb at the B3LYP/6-311++G (3df, 2p) level. The singlet-triplet splitting, G _s-t, of C₆H₆C, C₆H₆Si, C₆H₆Ge, C₆H₆Sn, and C₆H₆Pb generally increased from C₆H₆C toward C₆H₆Pb. The most stable tautomers and conformers were suggested for the singlet and triplet states of C₆H₆M (M = C, Si, Ge, Sn and Pb). The geometrical parameters were calculated and discussed. The text was submitted by the authors in English.     

Theoretical study of polyoxide clusters Sc20O30, P20O50, Ti20O30F20, and V20O30F20

The structural, electronic, and vibrational characteristics and energies of the isolated polyoxide clusters Sc₂₀O₃₀, P₂₀O₅₀, Ti₂₀O₃₀F₂₀, and V₂₀O₃₀F₂₀ and ammonia complexes Sc₂₀O₃₀ · nNH₃ were calculated by the density functional theory B3LYP method with several basis sets. The computation results show that a fullerene-like closo structure I _h with oxygen bridges located above the midpoints of the edges of an empty [M₂₀] dodecahedron is preferable for the Ti₂₀O₃₀F₂₀ and V₂₀O₃₀F₂₀ clusters with four-coordinate metal atoms protected by the outer M-F bonds. This structure with a cage diameter of ∼1 nm and the diameter of nearly planar decagonal faces (windows) of ∼0.5 nm is stable to dissociation into fragments and to strong geometric distortions and retains its closo shape when molecules like NH₃ and anions like H⁻ are attached to the cage. An analogous closo structure is favorable for the P₂₀O₅₀ cluster; however, in this structure, the [P₂₀] cage is severely distorted and all 12 windows are strongly corrugated. For Sc₂₀O₃₀, the I _h dodecahedron with bare three-coordinate Sc atoms corresponds to a local minimum of the potential energy surface, which is 170–200 kcal/mol less favorable than compact puck-shaped isomers in which four- and five-coordinate metal atoms and three- and four-coordinate oxygen atom prevail. “Solvation” of the dodecahedral and puck-shaped Sc₂₀O₃₀ isomers by ammonia molecules strongly decreases the energy gap between the isomers; however, the dodecahedron I _h in all cases remains a high-lying intermediate. According to calculations, most polyoxides under consideration have a high electron affinity (comparable with or higher than that of fullerenes) and is able to add three to five or more alkali-metal atoms to form radical salts in which clusters are in the state of polyanions. Because of large sizes of the [M₂₀] cages and their windows, the interior of the cage (as distinct from fullerenes) can accommodate a considerable number of atoms and several small molecules. The V₂₀O₃₀F₂₀ cluster has 20 unpaired electrons and can be treated as a molecular magnet. The properties of the [M₂₀] cages depend only slightly on the outer substituents. It is suggested that the pattern will be retained upon the substitution of OH groups for the F atoms and that the hydroxo-substituted clusters can bind to each other through hydrogen bridges and serve as building blocks for self-assembly into ordered nanometer and crystalline structures of various dimensions. Original Russian Text ? O.P. Charkin, N.M. Klimenko, D.O. Charkin, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 5, pp. 775–785.     

NaBO2-NaCl-Na2CO3, NaBO2- Na2CO3-NaMoO4, NaBO2- Na2CO3-NaWO4, and NaBO2-NaCl-Na2WO4 ternary systems

The phase diagrams of the NaBO₂-NaCl-Na₂CO₃, NaBO₂-Na₂CO₃-Na₂MoO₄, NaBO₂- Na₂CO₃-Na₂WO₄, and NaBO₂-NaCl-Na₂WO₄ ternary systems were studied by a calculation-experimental method and differential thermal analysis. The coordinates of ternary eutectics were determined: E ₁: 612°C, 16 mol % NaBO₂, 42 mol % NaCl, and 42 mol % Na₂CO₃; E ₂: 568°C, 12 mol % NaBO₂, 28 mol % Na₂CO₃, and 60 mol % Na₂MoO₄; E ₃: 575°C, 12 mol % NaBO₂, 32 mol % Na₂CO₃, and 56 mol % Na₂WO₄; E ₄: 628°C, 8 mol % NaBO₂, 20 mol % NaCl, and 72 mol % Na₂WO₄; and E ₅: 655°C, 9 mol % NaBO₂, 53 mol % NaCl, and 38 mol % Na₂WO₄.     

Ab Initio calculation of molecular, thermodynamic, and kinetic parameters of CF, CF2, CF3, and C2F5 radicals and CF4, CF3I, C2F4, and C2F6 molecules in gas

Enthalpies of formation of ground states of the gaseous particles CF, CF₂, C₂F₅, CF₄, CF₃I, C₂F₄, and C₂F₆ were calculated by ab initio method in the CCSD(T) approximation with extrapolation to the full basis and regard to the correlation energy. Their equilibrium geometrics, frequencies of normal vibrations, and other values were found by the B3LYP/aug-cc-pvdz method, from which thermodynamic functions within the range of 0–6000 K were calculated. Equilibrium constants were calculated from these functions, and then the information on the rate constants in the limit of high pressures was obtained.     

Structural chemistry of Sr3Cr2WO9, Ca3Cr2WO9, and Ba3Cr2WO9

We have studied the preparation and crystallographic structure of three perovskite-type compounds: Sr₃Cr₂WO₉, cubic, the lattice parameter of which is a = 7.812Å; Ca₃Cr₂WO₉, tetragonal, the lattice parameters of which are a = 5.408 Å and c = 7.635Å; and Ba₃Cr₂WO₉, hexagonal, the lattice parameters of which are a = 5.691 Å and c = 13.957Å. We have compared these three structures and shown the relationship between the dimensions of the alkaline-earth metal and the existence of the different structures.