Europium-sensitized Chemiluminescence of System Tetracycline–H<Subscript>2</Subscript>O<Subscript>2</Subscript>–Fe(II)/(III) and Its Application to the Determination of Tetracycline

Chemiluminescence (CL) of the reaction system tetracycline–H₂O₂–Fe(II)/(III)–Eu(III) was used for the determination of tetracycline hydrochloride in water, pharmaceutical preparations, and honey. The CL spectrum registered for this system shows emission bands typical of Eu(III) ions, with a maximum at λ ∼ 600 nm, corresponding to the electronic transitions of ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂. A strong chemiluminescence intensity characteristic of europium(III) ions in the system tetracycline–H₂O₂–Fe(II)/(III)–Eu(III), as contrasted to the emission of the system tetracycline–H₂O₂–Fe(II)/(III) without Eu(III), proves that the Eu(III) ion plays the role of a chemiluminescence sensitizer, accompanying tetracycline oxidation in the Fenton system (H₂O₂–Fe(II)/(III)). A linear dependence was observed for the integrated CL light intensity on the tetracycline concentration in the range of 2 × 10⁻⁷ to 3 × 10⁻⁵ mol l⁻¹ with the detection limit of 5 × 10⁻⁸ mol l⁻¹ in aqueous solution.     

Luminescence Characterisation of the Reaction System Histidine–KBrO3–Tb(III)–H2SO4

Chemiluminescence of the system containing Tb(III) ions, histidine and bromate ions in acid solution was studied. The kinetic curves and CL emission spectra of the system were discussed. The emission spectrum of the histidine–Tb(III)–KBrO₃–H₂SO₄ system revealed two emission maxima at ∼490 and 550 nm, characteristic of Tb(III) ions. Values of lifetimes of the Eu(III) excited states in Eu(III)–histidine system have shown that the histidine formed ML and ML₂ complexes in neutral solution and did not make them in acidic environment. On the basis of the results, a possible mechanism of reaction system: histidine–Tb(III)–KBrO₃–H₂SO₄ is presented.     

Investigation on the Micelle-Sensitized Ce (IV) - Lornoxicam-Rh B Chemiluminescence System and its Application

Based on the micelle synergism mechanism, a simple and sensitive flow injection chemiluminescence (FI-CL) method for the assay of lornoxicam was described. The CL signal generated from the reaction of Ce (IV) with lornoxicam in acidic solution was very weak, while the interfusion of sodium dodecyl benzene sulfonate (SDBS) resulted in a highly CL intensity. Under the optimum experimental conditions, the CL intensity was proportional to lornoxicam concentration over the range 1.0 × 10⁻¹⁰–7.3 × 10⁻⁸ g/mL with a detection limit of 4.9 × 10⁻¹¹ g/mL (3σ). The relative standard deviation for 11 replicate measurements of 3.0 × 10⁻⁹ g/mL of lornoxicam was 1.9%. The proposed method was successfully applied for the assay of lornoxicam in pharmaceuticals, human serum and urine with excellent recovery. The possible mechanism of CL reaction was also discussed briefly.     

Determination of Total Antioxidant Capacity by a New Spectrofluorometric Method Based on Ce(IV) Reduction: Ce(III) Fluorescence Probe for CERAC Assay

A Ce(IV)-based reducing capacity (CERAC) assay was developed to measure the total antioxidant capacity (TAC) of foods, in which Ce(IV) would selectively oxidize antioxidant compounds but not citric acid and reducing sugars which are not classified as antioxidants. The method is based on the electron-transfer (ET) reaction between Ce(IV) ion and antioxidants in optimized acidic sulphate medium (i.e., 0.3 M H₂SO₄ and 0.7 M Na₂SO₄) and subsequent determination of the produced Ce(III) ions by a fluorometric method. The fluorescent product, Ce(III), exhibited strong fluorescence at 360 nm with an excitation wavelength of 256 nm, the fluorescence intensity being correlated to antioxidant power of the original sample. The linear concentration range for most antioxidants was quite wide, e.g., 5.0 × 10⁻⁷–1.0 × 10⁻⁵ M for quercetin. The developed procedure was successfully applied to the TAC assay of antioxidant compounds such as trolox, quercetin, gallic acid, ascorbic acid, catechin, naringin, naringenin, caffeic acid, ferulic acid, glutathione, and cysteine. The proposed method was reproducible, additive in terms of TAC values of constituents of complex mixtures, and the trolox equivalent antioxidant capacities (TEAC coefficients) of the tested antioxidant compounds gave good correlations with those found by reference methods such as ABTS and CUPRAC.     

Silver Nanoparticle-Enhanced Chemiluminescence Method for Determining Naproxen Based on Europium(III)-Sensitized Ce(IV)-Na<Subscript>2</Subscript>S<Subscript>2</Subscript>O<Subscript>4</Subscript> Reaction

A simple and sensitive chemiluminescence (CL) method coupled with flow-injection technique is proposed to determine naproxen (NAP). The method is based upon the enhancement of the weak CL signal arising from the reaction of Ce(IV) and Na₂S₂O₄ with Eu³⁺ to form the Eu³⁺-Ce(IV)-Na₂S₂O₄ system. The CL intensity was significantly increased by the introduction of NAP into this system in the presence of silver nanoparticles (Ag NPs). Examination of the recorded UV–vis spectra and fluorescence spectra indicated that the energy of the intermediate SO₂*, which originated from the redox reaction of Ce(IV) and Na₂S₂O₄, was transferred to Eu³⁺ via NAP and that the process was accelerated by Ag NPs due to their catalytic activity. Under the optimum conditions, the CL intensity was increased with increasing NAP concentration and the correlation was linear (r = 0.9992) over the NAP concentration range of 1–420 ng mL⁻¹. The limit of detection (LOD) was 0.11 ng mL⁻¹ with a relative standard deviation (RSD) of 1.15% for 5 replicate determinations of 200 ng mL⁻¹ NAP. The method was successfully applied to determine NAP in pharmaceutical and biological samples.     

New Luminescent Bioprobes Eu(lll)-phloroglucinol Derivatives and Their Spectrofluorimetric, Electrochemical Interactions with Nucleotides and DNA

Two new ligands derived from phloroglucinol 2-{[(4-methoxy benzoyl ) oxy ] } methyl benzoic acid[L1] and 2-{[(4-methyl benzoyl )oxy] methyl} benzoic acid[L2] were synthesized. The solid complex Eu(III)-L2 has been synthesised and characterized by elemental analysis ,UV and IR spectra. The reaction of Eu(III) with the two synthesized ligands has been investigated in I = 0.1 mol dm^-3 p-toluene sulfonate by cyclic voltammetry and square wave voltammetry. The reaction of Eu (III)–L1 and Eu (III)–L2 binary complexes with nucleotide 5′-AMP , 5′-ADP ,5′-ATP , 5′- GMP , 5′-IMP , and 5′-CMP has been investigated using UV, fluorescence and electrochemical methods. The experimental conditions were selected such that self-association of the nucleotides and their complexes was negligibly small, that is, the monomeric complexes were studied. The interaction of the Eu(III)–L1 or L 2 solid complexes with calf-thymus DNA has been investigated by fluorescence and electrochemical methods including cyclic voltammetery(CV) ,differential pulse polarography (DPP) and square wave voltammetry (SWV) on a glassy carbon electrode. The fluorescence intensity of Eu(III)-L2 complex was enhanced with the addition of DNA. Under optimal conditions in phosphate buffer pH 7.0 at 25 °C the linear range is 3–20 μM for calf thymus DNA (CT–DNA) and the corresponding determination limit is 1.8 μM.     

Fluorescence and electrochemical recognition of nucleosides and DNA by a novel luminescent bioprobe Eu(III)-TNB

The luminescence arising from lanthanide cations offers several advantages over organic fluorescent molecules: sharp, distinctive emission bands allow for easy resolution between multiple lanthanide signals; long emission lifetimes (μs –ms) make them excellent candidates for time-resolved measurements; and high resistance to photo bleaching allow for long or repeated experiments. A method is presented for determination of nucleosides using the effect of enhancement of fluorescence of the easily accessible europium(III)-TNB in presence of different nucleosides. The latter coordinates to Eu(III) -TNB and enhances its luminescence intensity as a result of the displacement of water from the inner coordination sphere of the central metal. A similar method for the determination of DNA based on the quenching of Eu(III)-TNB has been established. The interaction of Eu(III)-4,4,4 trifluoro-1-(2-naphthyl)1,3-butanedione (TNB) complex with nucleosides (NS) (guanosine, adenosine, cytidine , inosine) and DNA has been studied using normal and time-resolved luminescence techniques. Binding constants were determined at 293 K, 298 K, 303 K, 308 K and 313 K by using Benesi-Hildebrand equation. A thermodynamic analysis showed that the reaction is spontaneous with ΔG being negative. The enthalpy ΔH and the entropy ΔS of reactions were all determined. The formation of binary and ternary complexes of Eu (III) with nucleosides and TNB has been studied potentiometrically at (25.0 ± 0.1) °C and ionic strength I = 0.1 mol.dm⁻³ (KNO₃) . The formation of the 1:1 binary and 1:1:1 ternary complexes are inferred from the corresponding titration curves. Initial estimates of the formation constants of the resulting species and the protonation constants of the different ligands used have been refined with the HYPERQUAD computer program. Electrochemical investigations for the systems under investigations have been carried out using cyclic voltammetry (CV), differential pulse polarography (DPP), and square wave voltammetry (SWV) on a glassy carbon electrode in I = 0.1 mol/L p-toluenesulfonate as supporting electrolyte.     

A Batch Chemiluminescence Determination of Enoxacin Using a Tris-(1,10-phenanthroline)ruthenium(II)–Cerium(IV) System

A batch type chemiluminescence (CL) determination of enoxacin is described. In this work, it was observed that enoxacin could enhance the chemiluminescence (CL) emission Ru(phen)₃ ²⁺–Ce(IV) system and this enhancement effect was dependent on the concentration of enoxacin, based on which, CL system was established for the determination of enoxacin. Under the optimum experimental conditions, the linear range and detection limit are 0.6406–64.06 μg/ml and 0.0210 μg/ml, respectively. The R.S.D. is 1.75%. (n=10). The proposed method has been applied to detect the content of enoxacin in pharmaceutical formulation and human serum with satisfactory results. The possible mechanism of the CL reaction was discussed.     

Fluorimetric Determination of Cerium(IV) with Ascorbic Acid

A simple, sensitive, and selective method for the determination of cerium(IV), based on the oxidative reaction between cerium(IV) and ascorbic acid, has been described. The fluorescence comes from Ce(III) at λ_excitation 298 nm and λ_emission 358 nm, which, in turn, is obtained from the oxidation of ascorbic acid by Ce(IV) in the presence of sulfuric acid. The optimum conditions such as concentrations of ascorbic acid, sulfuric acid media and pH of the buffer solution were investigated. The fluorescent intensity of the system is linear over the range 0.0531 μg/ml to 0.3322 mg/ml Ce(IV) and detection limit and correlation coefficient are 0.0145 μg/ml and R=0.99987,respectively.     

Study of Enhanced Chemiluminescence of Diperiodatocuprate (III) on 1,10-Phenanthroline/Hydrogen Peroxide/Cetyltrimethylammonium Bromide System

In the paper, a chemiluminescence (CL) system was developed based on the catalytical effect of diperiodatocuprate (III) (DPC) on the 1,10-phenanthroline (phen)/hydrogen peroxide (H₂O₂) in the presence of cetyltrimethylammonium bromide (CTAB). The effects of experimental conditions were investigated. Meanwhile the increase of CL intensity of the DPC/phen/H₂O₂/CTAB system is proportional to the concentration of phen in the range of low concentration. The linear range of the calibration curve is 5.0 × 10⁻⁹–1.0 × 10⁻⁶ mol L⁻¹, and the corresponding detection limit is 1.9 × 10⁻⁹ mol L⁻¹. The effects of phenolic compounds (PCs) on the system were investigated. Hydroquinone was used as an example to investigate the application of the CL system to the determination of PCs. The quenched CL intensity is linearly related to the logarithm of concentration of hydroquinone. The linear range of the calibration curve is 2.5 × 10⁻⁹–1.0 × 10⁻⁵ g mL⁻¹, and the corresponding detection limit is 1.8 × 10⁻⁹ g mL⁻¹. This phen and hydroquinone can be synchronously determined. The method was applied to the determination of hydroquinone in water samples and the recoveries were from 92% to 106%.     

Synthesis of Novel Eu(III) Luminescent Probe Based on 9- Acridinecarboxylic Acid Skelton for Sensing of ds-DNA

Eu(III)-9-acridinecarboxylate (9-ACA) complex was synthesized and characterized by elemental analysis, conductivity measurement, IR spectroscopy, thermal analysis, mass spectroscopy, ¹H-NMR, fluorescence and ultraviolet spectra. The results indicated that the composition of this complex is [Eu(III)-(9-ACA)₂(NCS)(C₂H₅OH)₂] 2.5 H₂O and the oxygen of the carbonyl group coordinated to Eu(III). The interaction between the complex with nucleotides guanosine 5′- monophosphate (5′-GMP), adenosine 5′-diphosphates (5′-ADP), inosine (5′-IMP) and CT-DNA was studied by fluorescence spectroscopy. The fluorescence intensity of Eu(III)-9-acridinecarboxylate complex was enhanced with the addition of CT-DNA. The effect of pH values on the fluorescence intensity of Eu(III) complex was investigated. Under experimental conditions, the linear range was 9–50 ng mL⁻¹ for calf thymus DNA (CT- DNA) and the corresponding detection limit was 5 ng mL⁻¹. The results showed that Eu(III)-(9-ACA)₂ complex binds to CT-DNA with stability constant of 2.41 × 10⁴ M .     

Photoluminescence of fluoroacrylate polymers impregnated with Eu(bta)<Subscript>3</Subscript> using supercritical CO<Subscript>2</Subscript>

Optical properties (photoluminescence and absorption) of Eu(bta)₃(B) _n (B = H₂O or 1,10-phenanthroline) polycrystalline powders and fluoroacrylate polymers (FAPs) impregnated with these compounds using supercritical CO₂ (SC CO₂) were investigated. It was established that impregnation of Eu(bta)₃phen into the FAPs using an SC CO₂ solution was difficult to achieve. The type of B (ancillary ligand) and the polymer matrix were shown to influence the temperature quenching of photoluminescence of Eu³⁺ ions in the range 25–100°C. A comparative analysis of quantum yields (λ_ex = 300 and 380 nm) and photoluminescence decay times (λ_ex = 337.1 nm) for Eu(bta)₃B _n and for Eu(bta)₃B _n -doped FAPs was performed.     

Spectroscopic studies of lanthanide(III) ion complexes with diethyl(phthalimidomethyl) phosphonate

Complexation and photophysical properties of complexes of lanthanide ions, Ln(III), with diethyl(phthalimidomethyl)phosphonate ligand, DPIP, were studied. Interactions between Ln(III) and DPIP were investigated using Nd(III) absorption and Eu(III) and Tb(III) luminescence (emission and excitation) spectra, recorded in acetonitrile solution containing different counter ions (NO₃^-, Cl^- and ClO₄^-). Results of the absorption spectroscopy have shown that counter ions play a significant role in the complexation of Ln(III)/DPIP complexes. Studies of luminescence spectra of Eu(III) and Tb(III) ions proved that the formation of Ln(III)/DPIP complexes of stoichiometry Ln:L=1:3 is preferred in solution. Based on the results of elemental analysis, Nd(III) absorption spectra and IR and NMR data, it was shown that the DPIP ligand binds Ln(III) ions via oxygen from phosphoryl group, forming complexes of a general formula Ln(DPIP)₃(NO₃)₃·H₂O, in which the NO₃^- ions are coordinated with the metal ion as bidentate ligands. Luminescent properties and energy transfer, from the ligand to Ln(III) ions in the complexes formed, were studied based on the emission and excitation spectra of Eu(III) and Tb(III). Their luminescent lifetimes and emission quantum yields were also measured.     

Spectral luminescence properties of Eu(III) complexes with tetracycline antibiotics and hydrogen peroxide

We have studied the spectral luminescence properties of mixed-ligand complexes of Eu(III) ions with tetracyclines and hydrogen peroxide. We have established that incorporation of hydrogen peroxide into the inner sphere of these complexes leads to a significant increase (by a factor of 10–25) in the intensity of luminescence of the Eu(III) ions, redistribution of the intensities of the ⁵D₀ → ⁷F_j transitions, in particular to an anomalous increase in the intensity of the band for the forbidden transition ⁵D₀ → ⁷F₀. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 3, pp. 310–314, May–June, 2007.     

Synthesis and Fluorescence Properties of Lanthanide (III) Perchlorate Complexes with Naphthyl-Naphthalinesulphonylpropyl Sulfoxide

A ligand with double sulfinyl groups, naphthyl-naphthalinesulphonylpropyl sulfoxide(dinaphthyl disulfoxide, L), was synthesized by a new method and its several lanthanide (III) complexes were synthesized and characterized by element analysis, molar conductivity, coordination titration analysis, IR, TG-DTA, ¹HNMR and UV spectra. The composition of these complexes, were RE₂(ClO₄)₆·(L)₅·nH₂O (RE = La, Nd, Eu, Tb, Yb, n = 2 ∼ 6, L = C₁₀H₇SOC₃H₆SOC₁₀H₇). The fluorescent spectra illustrated that the Eu (III) complex had an excellent luminescence. It was supposed that the ligand was benefited for transferring the energy from ligand to the excitation state energy level (⁵D₀) of Eu (III). The Tb (III) complex displayed weak luminescence, which attributed to low energy transferring efficiency between the average triplet state energy level of ligand and the excited state (⁵D₄) of Tb (III). So the Eu (III) complex displayed a good antenna effect for luminescence. The phosphorescence spectra and the relationship between fluorescence lifetime and fluorescence intensity were also discussed.     

Synthesis and Fluorescence Properties of Lanthanide (III) Perchlorate Complexes with Bis(benzoylmethyl) Sulfoxide

A ligand with two carbonyl groups and one sulfinyl group has been synthesized by a new method and its several lanthanide (III) complexes were synthesized and characterized by element analysis, molar conductivity, coordination titration analysis, IR, TG-DSC, ¹H NMR and UV spectra. The results indicated that the composition of these complexes is REL₅(ClO₄)₃·3H₂O (RE = La(III), Pr(III), Eu(III), Tb(III), Yb(III), L = C₆H₅COCH₂SOCH₂COC₆H₅). The fluorescent spectra illustrate that both the Tb (III) and Eu (III) complexes display characteristic metal-centered fluorescence in solid state, indicating the ligand favors energy transfer to the excitation state energy level of them. However, the Tb (III) complex displays more effective luminescence than the Eu (III) complex, which is attributed to especial effectively in transferring energy from the average triplet energy level of the ligands (T) onto the excited state (⁵D₄) of Tb (III) than that (⁵D₀) of Eu (III), showing a good antenna effect for Tb(III) luminescence. The phosphorescence spectra and the relationship between fluorescence lifetimes and fluorescence intensities were also discussed.     

New fluorimetric reagents, sodium pyrophosphate, sodium trimetaphosphate, and sodium tetrametaphosphate, for the determination of cerium(III)

Three sensitive and selective new alternatives for fluorometric determination of cerium(III) are described in this study. Ce(III) is highly fluorescent in sodium pyrophosphate, sodium trimetaphosphate, and sodium tetrametaphosphate solutions. For these reagents, the maximum excitation/emission wavelengths are 300/350, 297/340, and 299/352 nm, respectively. Maximum fluorescence intensities are obtained by irradiating Ce(III) dissolved in 0.033 g L⁻¹ sodium pyrophosphate, 41.4 g L⁻¹ sodium trimetaphosphate, and 0.96 g L⁻¹ sodium tetrametaphosphate at room temperature. The fluorescence intensities are linear over the range 0.001–30, 0.001–75, and 0.001–70 μg ml⁻¹. The detection limits are calculated as 9.5 × 10⁻³, 1.1/10⁻³, and 3.8 × 10^-3 μg ml⁻¹ Ce(III), respectively. The relative standard deviations for 15/0.05 Μg ml⁻¹ Ce(III) are 1.1/1.2, 1/1.1, and 1.2/1.3%, respectively. Quenching effects of other lanthanides and some inorganic anions were investigated. The methods have been applied to rare earth mixtures with a good accuracy.     

Synthesis, Characterization and DNA-binding Properties of Ln(III) Complexes with 6-Ethoxy Chromone-3-Carbaldehyde Benzoyl Hydrazone

A novel 6-ethoxy chromone-3-carbaldehyde benzoyl hydrazone (L) and its Ln(III) complexes, [Ln = Sm (1), Eu (2), Gd (3), Tb (4)], have been synthesized and characterized. The fluorescence properties of the Eu(III) and Sm(III) complexes in solid state and Eu(III) complex in different solutions (DMF, DMSO, methanol and acetonitrile) were investigated. At the same time, the DNA-binding properties of the two complexes are investigated using UV-Vis absorption spectroscopy, fluorescence spectroscopy, viscosity measurement. All the experimental evidences indicate that the two complexes can bind to CT-DNA via an intercalation mechanism. Furthermore, antioxidant activity tests in vitro showed that the complexes have significant antioxidative activity against hydroxyl free radicals from the Fenton reaction.     

A Long Wavelength Excitable Fluorophore; Chloro Phenyl Imino Propenyl Aniline (CPIPA) for Selective Sensing of Hg (II)

In this study, a very sensitive and highly selective irreversible optical chemical sensor (optode) for mercury ions was described. The sensing scheme was based on the interaction of Hg (II) with a newly synthesized fluoroionophore; chloro phenyl imino propenyl aniline (CPIPA) in plasticized PVC membrane. The sensor membranes were tested for the determination of mercury ion in aqueous solutions by batch and flow-through methods. The optodes allow determination of Hg (II) in the working range of 1.0 × 10⁻⁹–1.0 × 10⁻⁵ M with a detection limit of 4.3 ppb. The sensor exhibited excellent selectivity for Hg (II) with respect to several common alkali, alkaline earth and transition metal ions. The association constant of the 1:1 complex formation for Hg (II) was found to be K_a = 1.86 × 10⁵ M⁻¹. The CPIPA exhibited high fluorescence quantum yield, long excitation and emission wavelength and high Stokes’ shift values in the solid matrix which makes it compatible with solid state optics.     

Tween-80-(NH4)2SO4-XO体系中铜、镧、铀、铈光谱及萃取性能研究

利用二甲酚橙作萃取剂 ,在吐温 80 (NH4 ) 2 SO4 二甲酚橙 (XO)固 液萃取体系中 ,研究了萃取相 (固相 )中金属离子络合物吸收光谱 ,与XO光谱比较 ,Cu(Ⅱ ) ,U(Ⅵ ) ,Ce(Ⅳ )离子吸光度增大 ,最大吸收波长红移 2 0～ 30nm ;La(Ⅲ )离子几乎未变。同时探讨了该体系中不同酸度、不同盐用量、不同萃取剂用量、不同类型表面活性剂 ,对Cu(Ⅱ ) ,La(Ⅲ ) ,U(Ⅵ ) ,Ce(Ⅳ )离子的萃取率的影响 ,在pH 6 0的酸度下 ,实现了La(Ⅲ )与U(Ⅵ )之间的萃取分离。