Convenient preparative synthesis of pentacyclo[5.3.0.02,5.03,9.04,8]decane (<Emphasis Type="Italic">C</Emphasis><Subscript>2</Subscript>-Bishomocubane)

By reaction of pentacyclo[5.3.0.0^2,5.0^3,9.0^4,8]decane-6,10-dione 6-ethyleneketal with lithium aluminum hydride the corresponding hydroxyketal was obtained whose hydroxy group was replaced by chlorine at boiling in CCl₄ in the presence of a 15% molar excess of triphenylphosphine. 6-Ethyleneketal of pentacyclo-[5.3.0.0^2,5.0^3,9.0^4,8]decan-6-one obtained by dechlorination of the chloroketal in a system lithium-t-BuOH in THF was hydrolyzed to ketone by heating in 10% sulfuric acid in the presence of THF. The obtained ketone was reduced along Wolf-Kishner reaction to pentacyclo[5.3.0.0^2,5.0^3,9.0^4,8]decane.     

Diels–Alder reactivity of 2-(bromomethyl)-1,4-quinone and 2-bromo-5-(bromomethyl)-1,4-quinone with cyclopentadiene and the synthesis of new substituted pentacyclic systems

Photochemical synthesis of the novel compounds 3-bromotetracyclo [5.3.1.0^2,6.0^4,8] undec-10(12)-ene-9,11-dione, 1-(bromomethyl)pentacyclo [5.4.0.0^2,6.0^3,10.0^5,9]undeca-8,11-dione and 1-bromo-9-(bromomethyl)pentacyclo [5.4.0.0^2,6.0^3,10.0^5,9]undeca-8,11-dione is described.     

Computational analysis of the nucleophilic eliminative ring fission of bridgehead substituted 1,3-bishomocubyl acetates

Molecular mechanics (MM2) calculations on the conceivable seco-cage structures by homoketonization of two types of bridgehead substituted 1,3-bishomocubyl acetates, viz. type A : 4-acetoxy-pentacyclo[5.3.0.0^2,5.0^3,9.0^4,8] decan-6-one and its ethylene ketal, and type B: 8-acetoxypentacyclo [5.3.0.0^2,5.0^3,9.0^4,8]decan-6-one, its ethylene ketal and 8-acetoxypentacyclo[5.3.0.0^2,5.0^3,9.0^4,8]decane were performed.     

Formation of novel polycyclic cage compounds through ‘uncaging’ of readily accessible higher cage compounds

The synthesis of the novel cage compounds 7-halomethyl-8-(carbomethoxy)tetracyclo[4.2.1.1^4,7.0^2,5]deca-3-(11)-ene-10-ones, methyl-4-methylene-6-oxopentacyclo[5.4.0.0.^2,5.0^3,10.0^7,9]undecane-9-carboxylate, 3-chloromethyl-4-(carbomethoxy)tetracyclo[4.2.1.1.^3,8.0^2,5]deca-7(11)ene-10-one, 2-bromo-5-methyl-8-methylene-6-oxotricyclo[5.3.0.0^3,9]decane-4-carboxylic acid and 2-bromo-5-methyl-8-methylene-6-oxotricyclo[5.3.0.0^3,9]decane-4-methyl carboxylate, achieved through base catalyzed rearrangement, is described.     

The dimerization and photochemical rearrangement of pentacyclo-[5.4.0.0.0.0]undecane-8-thione

Pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecan-8-one 1 is readily sulfurated into pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane-8-thione 2 with Lawesson’s reagent in dry THF. Upon standing at ambient temperature the thione 2 formed the corresponding thio-dimer 3 within 10 days. When the thio-dimer 3 was exposed to oxygen and ultraviolet light an unexpected photochemical oxidation and rearrangement took place to form the stable disulfenate 5.     

Thionation of the monoacetal of pentacyclo[5.4.0.0.0.0]undecane-8,11-dione

As part of a programme to synthesize thione derivatives with pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane moieties it was decided to sulfurize the monoacetal 6 of pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane-8,11-dione 2. Unexpectedly the diol 9 was isolated as the product.     

The preparation and properties of cage polycyclic systems—III: The cleavage in alkaline conditions of acetals derived from pentacyclo[5.3.0.02,5.03,9.04,8]decane and pentacyclo[4.3.0.02,5.03,8.04,7]nonane systems

The synthesis of some acetals derived from pentacyclo[5.3.0.0^2,5.0^3,9.0^4,8]decane is described. The reductive cleavage of an ethylenedioxy group

1. Download full-size image

and a dimethoxy group

1. Download full-size image

in pentacyclo[5.3.0.0^2,5.0^3,9.0^4,8]decane and pentacyclo[4.3.0.0^2,5.0^3,8.0^4,7]nonane systems to give the methylene group is shown to occur in alkaline conditions in the presence of hydrazine. Evidence is presented for a mechanism which involves initial cleavage of the acetal by alkali to form the ketone. The substitution of a Br atom in the position neighbouring the CO group of 5-bromo-6,6-ethylenedioxypentacyclo[5.3.0.0^2,5.0^3,9.0^4,8]decan-10-one facilitates the Wolff-Kishner reaction to such an extent that hydrazine hydrate is a sufficiently strong base to induce the decomposition of the hydrazone directly.     

A decisive electronic effect of a bridgehead methoxy substituent on the electrophilic cage opening of 1,3-bishomocubanones

4-Methoxypentacyclo[5.3.0.0^2,5.0^3,9.0^,4,8] decan-6-ones 4 and 9 undergo an acid catalysed cage fragmentation to give tricyclodecenediones 6 and 10, respectively. With silver cations under basic conditions, an unusual oxidative cage fission reaction is observed leading to tetracyclo[4.3.0.0^2,40^3,8]nonan-5-one 7-carboxylic acids.     

Reactions of Polycyclic Ketones with Dimethoxycarbene; a Convenient Route for a ‘One‐Pot’ Preparation of Some α‐Hydroxycarboxylic Acid Esters

Polycyclic ‘cage’ ketones, such as pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecan‐8‐one ( 10 ), pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane‐8,11‐dione ( 11 ), and adamantan‐2‐one ( 16 ) were treated with the nucleophilic dimethoxycarbene (DMC; 1 ), which was generated thermally from 2,5‐dihydro‐2,2‐dimethoxy‐5,5‐dimethyl‐1,3,4‐oxadiazole ( 4a ) in boiling toluene. In this ‘one‐pot’ procedure, the α‐hydroxycarboxylic acid ester 12 or a corresponding derivative 15 or 17 was obtained (Schemes 4–7). Additionally, ‘cage’ thione 21 was treated with DMC under the same conditions yielding dimethoxythiirane 22 (Scheme 8). Subsequent hydrolysis or desulfurization (followed by hydrolysis on silica gel) of 22 gave α‐mercaptocarboxylate 25 and the corresponding desulfurized ester 24 , respectively. In all cases, the addition of DMC occurred stereoselectively, and the addition from the exo‐face is postulated to explain the structures of the isolated products.     

Synthesis of hexacyclo[7.4.0.02,8.03,7.06,11]Tridecane-10,13-dione(“homosecohexaprismane-10,13-dione”)

HEXACYCLO[7.4.0.0^2,8.0^3,7.0^6,11]tridecane-10,13-dione (“homosecohexaprismane-10,13-dione”, 8) has been prepared via a six-step sequence that results in homologation of two of the cyclopentane rings in pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]-undecane-8,11-dione, 1. The structure of 8 has been established unequivocally via single crystal X-ray structural analysis.     

Synthesis of novel highly functionalized biologically active polycyclic caged amides

The synthesis of novel polycyclic amides has been achieved through the reaction of bishalomethyl pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane diones with acyclic and cyclic secondary amines in the presence of an ionic liquid. Three of the compounds prepared have been found to possess antituberculosis activity.     

Base-promoted rearrangement of cage α-haloketones—II : 12-oxa-3,5,9,10-tetrachlorohexacyclo[5.4.1.02,6.03,10.05,9.08,11]-dodecane-4-one

A synthesis of 12-oxa-3,5,9,10-tetrachlorohexacyclo[5.4.1.0^2,6.0^3,10.0^5,9.0^8,11]dodecane-4-one (6) from 4,4-dimethoxy-2,3,5,6-tetrachloropentacyclo [[5.4.0.0^2,6.0^3,10.0^5,9]undecane-8,11-dione (1) is described. Reaction of 6 with sodium hydroxide in refluxing benzene, toluene, or tetrahydrofuran affords 11-oxa-3,4,5-exo-6-tetrachloropentacyclo [[6.2.1.0^2,7.0^4,10.0^5,9]undecane-endo-3-carboxylic acid (7a, 80·2% yield). The corresponding reaction of 6 with refluxing aqueous sodium hydroxide solution affords 4,12-dioxa-8,11-dichlorohexacyclo-[5.4.1.0^2,6.0^3,10.0^5,9.0^8,11]dodecane-1-carboxylic acid (8a, 66·5% yield). A mechanism which accounts for the formation of 7a and 8a from 6 is presented.     

Synthesis of novel cage oxaheterocycles

m-CPBA-promoted Baeyer-Villiger oxidation of pentacyclo[6.3.0.0(2,6).0(3,10).0(5,9)]undecan-4-one (1) afforded the corresponding lactone 2 in 93% yield. Lithium aluminum hydride promoted reduction of lactones 2, 6, and 9, performed in the presence of BF(3).OEt(2) reagent, afforded the corresponding cage ethers, i.e., 4, 7, and 10, respectively. Two methods that can be used to replace a cage C=O group by ether oxygen without concomitant rearrangement are delineated. A key step in the first of these methods employs m-CPBA promoted "double Criegee rearrangement", which was used to convert pentacyclo[6.3.0.0(2,6).0(3,10).0(5,9)]undecan-4-one diethyl acetal (11) into 7,9-dioxapentacyclo-[8.3.0.0(2,6).0(3,12).0(5,11)]tridecan-8-one (12). Subsequently, 12 was converted into 4-oxapentacyclo[6.3.0.0(2,6).0(3,10).0(5,9)]undecane (14) via a two-step reduction-dehydration reaction sequence. The second method utilized PhI(OAc)(2)-I(2) reagent to convert cage lactols 15 and 17 into the corresponding cage ethers, i.e., 14 and 2-oxaadamantane (18), respectively.     

Preparation and complete 1 H and 13C assignment of some pentacyclo[5.4.0.02,6.03,10.05,9]undecane‐8,11‐dione (PCUD) derivatives

The preparation of a number of alkyl and alkoxy derivatives of pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane‐8,11‐dione derivatives utilising a cheap, practical, low energy, ‘green’, single‐pass continuous flow photochemical reactor is reported. Their ¹ H and ¹³C NMR spectra are fully assigned, revealing some general characteristics not previously reported for this class of compound, which should aid the assignment and prediction of the NMR spectra of PCUD derivatives. Copyright © 2012 John Wiley & Sons, Ltd.     

3-Phenyl-D3-Trishomocuban-4-ol: Structure and Configuration

The crystal structure of 3-phenyl-D₃-trishomocuban-4-ol ( 4 ) was determined by X-ray crystallography (Fig. 1). Compound 4 was prepared from 8-phenylpentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecan-8-ol in acidic medium. This is a facile method to prepare substituted trishomocubanes with a specific configuration at C(4).     

Nucleophilic Addition to C,C-Double Bonds. Part VIII. The standard enthalpies of formation of anti9,10-10endo-hydroxytricyclo [4.2.1.12,5]deca-3,7-dien-9-one and 9-Oxatetracyclo [5.4.0.03,10.04,8]undec-5-en-2-one and kinetic data for the cyclization of the olefinic alcohol to the ether

In view of the significance of steric compression in the base-catalyzed intramolecular cyclization of polycyclic olefinic alcohols, the standard enthalpies of formation of anti^9,10-10 endo-hydroxytricyclo [4.2.1.1^2,5]deca-3,7-dien-9-one (1) and 9-oxatetracyclo [5.4.0.0^3,10.0^4,8]undec-5-en-2-one (2) as well as the kinetics of the ether formation 1 → 2 were determined.     

Microwave-assisted methods for the synthesis of pentacyclo[5.4.0.0.0.0]undecylamines

Efficient methodologies for the preparation of pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane (PCU) amine derivatives are described via microwave-assisted synthesis. The obtained results revealed that microwave-assisted synthetic procedures under controlled conditions (power, temperature and time) are very convenient, high yielding, efficient and low-cost methods for the preparation of PCU amine derivatives. The new methods show several advantages including operational simplicity, good performance, significant reduction in reaction time, less by-product formation and easier purification.     

Zur Photochemie von (Z,Z)-2,7-Cyclodecadien-1-on und 4,8-Cyclododecadien-1-on. Synthese und Eigenschaften von Tricyclo[5.3.0.02,8]decan-Systemen

On the Photochemistry of (Z,Z)-2,7-Cyclodecadien-1-one and 4,8-Cyclododecadien-1-one. Synthesis and Properties of Tricyclo[5.3.0.0^2,8]decane Systems Irradiation of (Z,Z)-2,7-cyclodecadien-1-one ( 3 ) yields (Z,Z)-3,7-cyclodecadien-1-one ( 12 ) or tricyclo-[5.3.0.0^2,8]decan-4-one ( 16 ), depending on the reaction conditions. Irradiation of 4,8-cyclododecadien-1-one ( 28 ) results also in a light-induced transannular [2 + 2] cycloaddition, yielding tetracyclo[7.3.0.0^2,100^3,6]dodecan-1-one ( 30 ). Starting from 16 , the preparation of tricyclo[5.3.0.0^2,8]dec-4-ene ( 19 ), tricyclo[5.3.0.0^2,8]dec-4-ene ( 21 ) and tricyclo[5.3.0.0^2,8]deca-3,5-diene ( 24 ) is described. The ¹H-NMR and ¹³C? NMR spectra of the newly prepared compounds are discussed. In the case of 19, 21 , and 24 , the electronic structure is discussed on hand of their PE spectra.     

Nucleophilic eliminative ring fission of bridgehead substituted 1,3-bishomocubyl acetates

The base induced cage fission of three different types of functionalized bridgehead substituted 1,3-bishomocubyl acetates, vizA,B and C is described. The synthesis of two 6-functionalized 1,3-bishomocubyl 4-acetates (type A), viz4-acetoxypentacyclo[5.3.0.0^2,5.0^3,9.0^4,8]decan-6-one 5 and its ethylene acetal 6 has been accomplished starting from the readily available Diels-Alder adduct 4. The synthesis of three 1,3-bishomocubyl 8-acetates (type B), viz 8-acetoxypentacyclo[5.3.0^2,5.0^3,9.0^4,8]decan-6-one 15, its ethylene acetal 16 and the parent acetate 20 has been carried out starting from the cyclopentadiene-benzoquinone adduct 7. Base induced homoketonization of 6, 16 and 20 leads regio- and stereospecifically to the thermodynamically favored half cage ketones 22,28 and 31, respectively. In contrast, the cage opening of the β-ketoacetates 5 and 15 is essentially directed by the β-ketone function. In the case of 5, regiospecific cleavage of the central C₄-C₅ bond is observed producing in a stereospecific manner diketone 25 in quantitative yield. Under similar conditions, acetate 15 gives a complex mixture of cage opened products arising from further fragmentation of the initially formed diketone 34. Deuterium labeling experiments reveal an anti-Bredt behavior of half cage ketones 28 and 31. The synthesis of a bridgehead acetate of type C has been accomplished by stereoselective reduction of ketone acetate 5 with LiAlH(t-OBu)₃ followed by mesylation. A mixture of epimers 36a and 36b (ratio 1:4) is obtained from which the predominant anti-epimer 36b could be isolated. An X-ray analysis established its structure. Base induced cage fission of 36b leads regiospecifically to tetracyclo[5.3.0.0^2,5.04,8]decenone 37. In contrast the syn-epimer 36a, under similar conditions, only affords the bridgehead alcohol 38.     

1-methyl-(D3)-trishomocubane

The acid catalysed rearrangement of 8-methyl-pentacyclo(5.4.0.0^2,6.0^3,10.0^5,9)undecan-8-endo-o1 ($\text{8}$) to 3-methyl-(D₃)-trishomocuban-4-o1 ($\text{9}$) provided the key step to the synthesis of the title compound ($\text{11}$).