The effect of variable viscosity on MHD viscoelastic fluid flow and heat transfer over a stretching sheet

An analysis has been carried out to study the momentum and heat transfer characteristics in an incompressible electrically conducting non-Newtonian boundary layer flow of a viscoelastic fluid over a stretching sheet. The partial differential equations governing the flow and heat transfer characteristics are converted into highly non-linear coupled ordinary differential equations by similarity transformations. The effect of variable fluid viscosity, Magnetic parameter, Prandtl number, variable thermal conductivity, heat source/sink parameter and thermal radiation parameter are analyzed for velocity, temperature fields, and wall temperature gradient. The resultant coupled highly non-linear ordinary differential equations are solved numerically by employing a shooting technique with fourth order Runge–Kutta integration scheme. The fluid viscosity and thermal conductivity, respectively, assumed to vary as an inverse and linear function of temperature. The analysis reveals that the wall temperature profile decreases significantly due to increase in magnetic field parameter. Further, it is noticed that the skin friction of the sheet decreases due to increase in the Magnetic parameter of the flow characteristics.     

Hall current effect on MHD mixed convection flow from an inclined continuously stretching surface with blowing/suction and internal heat generation/absorption

Hydromagnetic heat transfer by mixed convection along an inclined continuously stretching surface, with power-law variation in the surface temperature or heat flux, in the presence of Hall current and internal heat generation/absorption has been studied. The surface is considered to be permeable to allow fluid suction or blowing, and stretching with a surface velocity varied according to a power-law. Two cases of the temperature boundary conditions were considered at the surface. The governing equations have been transformed into non-similar partial differential equations which have been integrated by the forth-order Runge–Kutta method. The effect of Hall parameter, magnetic parameter, dimensionless blowing/suction parameter, space and temperature dependent internal heat generation/absorption parameters and buoyancy force parameters on the temperature, primary and secondary flow velocity have been studied parametrically. All parameters involved in the problem affect the flow and thermal distributions except the temperature-dependent internal heat generation/absorption in the case of prescribed heat flux (PHF). Numerical values of the local skin-friction and the local Nusselt numbers for various parametric conditions have been tabulated.     

MHD non-Darcy mixed convective diffusion of species over a stretching sheet embedded in a porous medium with non-uniform heat source/sink, variable viscosity and Soret effect

The effects of temperature dependent viscosity and non-uniform heat source/sink on non-Darcy MHD mixed convection boundary layer flow over a vertical stretching sheet embedded in a fluid-saturated porous media is studied in this paper. Boundary layer equations are transformed into ordinary differential equations using self-similarity transformation which are then solved numerically using fifth-order Runge-Kutta-Fehlberg method with shooting technique for various values of the governing parameters. The effects of variable viscosity, porosity, electric field parameter, non-uniform heat source/sink parameters, Soret number and Schmidt number on concentration profiles are analyzed and discussed. Favorable comparisons with previously published work on various special cases of the problem are obtained. Numerical results for variation of the local Sherwood number with buoyancy parameter, Schmidt number, and Soret number are reported graphically to show some interesting aspects of the physical parameters.     

Cattaneo–Christov heat flux model for three-dimensional magnetohydrodynamic flow of an Eyring Powell fluid over an exponentially stretching surface with convective boundary condition

The present model concentrates on three-dimensional steady incompressible flow of an Eyring-Powell nanofluid past an exponentially stretching sheet with magnetic field. The Cattaneo–Christov heat flux with convective boundary condition is accounted for. Shooting method is the instrumental for obtaining numerical solution of the transformed-converted system of the mathematical models. Behavior of the determining thermo-physical parameters on the velocity, temperature, skin friction, heat transfer rate, and finally isotherms are considered. The major relevant outcomes of the current investigation are that increment in Eyring-Powell parameter uplifts flow velocity, while that peters out the fluid temperature. Enhanced values of the mixed convection parameter weakened the skin friction coefficient while it slightly strengthened the rate of heat transfer.     

Convective heat and mass transfer in three-dimensional mixed convection flow of viscoelastic fluid in presence of chemical reaction and heat source/sink

Heat and mass transfer effects in the three-dimensional mixed convection flow of a viscoelastic fluid with internal heat source/sink and chemical reaction have been investigated in the present work. The flow generation is because of an exponentially stretching surface. Magnetic field normal to the direction of flow is considered. Convective conditions at the surface are also encountered. Appropriate similarity transformations are utilized to reduce the boundary layer partial differential equations into the ordinary differential equations. The homotopy analysis method is used to develop the solution expressions. Impacts of different controlling parameters such as ratio parameter, Hartman number, internal heat source/sink, chemical reaction, mixed convection, concentration buoyancy parameter and Biot numbers on the velocity, temperature and concentration profiles are analyzed. The local Nusselt and Sherwood numbers are sketched and examined.     

Combined effects of non-uniform heat source/sink and thermal radiation on heat transfer over an unsteady stretching permeable surface

The present paper is concerned with the study of flow and heat transfer characteristics in the unsteady laminar boundary layer flow of an incompressible viscous fluid over continuously stretching permeable surface in the presence of a non-uniform heat source/sink and thermal radiation. The unsteadiness in the flow and temperature fields is because of the time-dependent stretching velocity and surface temperature. Similarity transformations are used to convert the governing time-dependent nonlinear boundary layer equations for momentum and thermal energy are reduced to a system of nonlinear ordinary differential equations containing Prandtl number, non-uniform heat source/sink parameter, thermal radiation and unsteadiness parameter with appropriate boundary conditions. These equations are solved numerically by applying shooting method using Runge–Kutta–Fehlberg method. Comparison of numerical results is made with the earlier published results under limiting cases. The effects of the unsteadiness parameter, thermal radiation, suction/injection parameter, non-uniform heat source/sink parameter on flow and heat transfer characteristics as well as on the local Nusselt number are shown graphically.     

MHD flow and heat transfer of a micropolar fluid over a stretching surface with heat generation (absorption) and slip velocity

In this work, the effects of slip velocity on the flow and heat transfer for an electrically conducting micropolar fluid over a permeable stretching surface with variable heat flux in the presence of heat generation (absorption) and a transverse magnetic field are investigated. The governing partial differential equations describing the problem are converted to a system of non-linear ordinary differential equations by using the similarity transformation, which is solved numerically using the Chebyshev spectral method. The effects of the slip parameter on the flow, micro-rotation and temperature profiles as well as on the local skin-friction coefficient, the wall couple stress and the local Nusselt number are presented graphically. The numerical results of the local skin-friction coefficient, the wall couple stress and the local Nusselt number are given in a tabular form and discussed.     

Mixed convection boundary layer flow over a permeable vertical surface with prescribed wall heat flux

The effects of suction/injection on the laminar mixed convection boundary-layer flow on a vertical wall with a prescribed heat flux are considered. The conditions which allow the equations to be reduced to similarity form are derived and numerical solutions of the resulting equations are obtained for a range of values of the suction/injection and buoyancy parameters. Two specific cases, corresponding to a stagnation point flow and uniform wall heat flux, are treated in detail. Results are presented in terms of the skin friction and wall temperature with a selection of velocity and temperature profiles also being given. Dual solutions are found to exist for assisting flow, these are an addition to what has been reported previously for opposing flows. Solutions for some limiting values of the parameters are also derived.      

Similarity solutions for magneto-forced-unsteady free convective laminar boundary-layer flow

The group theoretic method is applied for solving problem of a unsteady free-convective laminar boundary-layer flow on a non-isothermal vertical plate under the effect of an external velocity and a magnetic field normal to the plate. The application of two-parameter transformation group reduces the number of independent variables, by two, and consequently the system of governing partial differential equations with the boundary and initial conditions reduces to a system of ordinary differential equations with appropriate corresponding conditions. The Runge–Kutta shooting method used to find the numerical solution of the velocity field, shear stress, heat transfer and heat flux has been obtained. The effect of the magnetic field on the velocity field and the Prandtl number on the heat transfer and heat flux has been discussed.     

Heat transfer over an unsteady stretching permeable surface with prescribed wall temperature

The unsteady laminar boundary layer flow over a continuously stretching permeable surface is investigated. The unsteadiness in the flow and temperature fields is caused by the time-dependence of the stretching velocity and the surface temperature. Effects of the unsteadiness parameter, suction/injection parameter and Prandtl number on the heat transfer characteristics are thoroughly examined.     

Natural convection boundary layer flow of fluid with temperature-dependent viscosity from a horizontal elliptical cylinder with constant surface heat flux

This study deals with the temperature-dependent viscosity effects on the natural convection boundary layer on a horizontal elliptical cylinder with constant surface heat flux. The mathematical problem is reduced to a pair of coupled partial differential equations for the temperature and the stream function, and the resulting nonlinear equations are solved numerically by cubic spline collocation method. Results for the heat transfer characteristics are presented as functions of eccentric angle for various values of viscosity variation parameters, Prandtl numbers and aspect ratios. Results show that an increase in the viscosity variation parameter tends to accelerate the fluid flow near the surface and increase the maximum velocity, thus decreasing the velocity boundary layer thickness. As the viscosity variation parameter is increased, the surface temperature tends to decrease, thus increasing the local Nusselt number. Moreover, the local Nusselt number of the elliptical cylinder increases as the Prandtl number of the fluid is increased.     

The study of Heat and Mass Transfer in a Visco elastic fluid due to a continuous stretching surface using Homotopy Analysis Method

In this paper, an approximate analytical solution is derived for the flow velocity and temperature due to the laminar, two-dimensional flow of non-Newtonian incompressible visco elastic fluid due to a continuous stretching surface. The surface is stretched with a velocity proportional to the distance $x$ along the surface. The surface is assumed to have either power-law heat flux or power-law temperature distribution. The presence of source/sink and the effect of uniform suction and injection on the flow are considered for analysis. An approximate analytical solution has been obtained using Homotopy Analysis Method(HAM) for various values of visco elastic parameter, suction and injection rates. Optimal values of the convergence control parameters are computed for the flow variables. It was found that the computational time required for averaged residual error calculation is very very small compared to the computation time of exact squared residual errors. The effect of mass transfer parameter, visco elastic parameter, source/sink parameter and the power law index on flow variables such as velocity, temperature profiles, shear stress, heat and mass transfer rates are discussed.     

Mixed convection heat transfer in the boundary layers on an exponentially stretching surface with magnetic field

An analysis has been carried out to describe mixed convection heat transfer in the boundary layers on an exponentially stretching continuous surface with an exponential temperature distribution in the presence of magnetic field, viscous dissipation and internal heat generation/absorption. Approximate analytical similarity solutions of the highly non-linear momentum and energy equations are obtained. The present results are found to be in excellent agreement with previously published work on various special cases of the problem. Numerical results for temperature distribution and the local Nusselt number have been obtained for different values of the governing parameters. The numerical solutions are obtained by considering an exponential dependent stretching velocity and prescribed boundary temperature on the flow directional coordinate. The effects of various physical parameters like Prandtl number, Hartman number, Grashof number on dimensionless heat transfer characteristics are discussed in detail. In particular, it has been found that increase in Prandtl number decreases the skin-friction coefficient at the stretching surface, while increase in the strength of the magnetic field leads to increase in the local Nusselt number.     

Analysis of fluid flow and heat transfer over an unsteady stretching surface

This article considers two situations involving unsteady laminar boundary layer flow due to a stretching surface in a quiescent viscous incompressible fluid. In one configuration, the surface is impermeable with prescribed heat flux, in the other, the surface is permeable with prescribed temperature. The boundary value problems governing a similarity reduction for each of these situations are investigated and the existence of a solution is proved for all relevant values of physical parameters. The uniqueness of the solution is also proved for some (but not all) values of the parameters. Finally, a priori bounds are obtained for the skin friction coefficient and local Nusselt number.     

The effects of chemical reaction,Hall and ion-slip currents on MHD flow with temperature dependent viscosity and thermal diffusivity

In this paper, the problem of magneto-micropolar fluid flow, heat and mass transfer with suction and blowing through a porous medium is analyzed numerically. This problem was studied under the effects of chemical reaction, Hall, ion-slip currents, variable viscosity and variable thermal diffusivity. The governing fundamental equations are approximated by a system of non-linear ordinary differential equation. This system is solved numerically by using the Chebyshev pseudospectral method. Details of the velocities, temperature and concentration fields as well as the local skin-friction, the local Nusselt number and the local Sherwood number for the various values of the parameters of the problem are presented. The numerical results indicate that, the concentration decreases as the permeability parameter, the chemical reaction parameter and Schmidt number increase and it increases as variable viscosity and variable thermal diffusivity increase. The local Nusselt number and the local Sherwood number decrease as the magnetic field and ion-slip current parameters increase, whereas they increase as Hall current parameter increases. Also, there is a (non-linear) strong dependency of the concentration gradient at the wall on both Schmidt number and the mass transfer parameter.     

Numerical investigation of transient heat transfer to hydromagnetic channel flow with radiative heat and convective cooling

This present study consists of a numerical investigation of transient heat transfer in channel flow of an electrically conducting variable viscosity Boussinesq fluid in the presence of a magnetic field and thermal radiation. The temperature dependent nature of viscosity is assumed to follow an exponentially model and the system exchanges heat with the ambient following Newton’s law of cooling. The governing nonlinear equations of momentum and energy transport are solved numerically using a semi-implicit finite difference method. Solutions are presented in graphical form and given in terms of fluid velocity, fluid temperature, skin friction and heat transfer rate for various parametric values. Our results reveal that combined effect of thermal radiation, magnetic field, viscosity variation and convective cooling have significant impact in controlling the rate of heat transfer in the boundary layer region.     

Heat transfer in unsteady axisymmetric second grade fluid

This work looks at the heat transfer effects on the flow of a second grade fluid over a radially stretching sheet. The axisymmetric flow of a second grade fluid is induced due to linear stretching of a sheet. Mathematical analysis has been carried out for two heating processes, namely (i) with prescribed surface temperature (PST case) and (ii) prescribed surface heat flux (PHF case). The modelled non-linear partial differential equations in two dependent variables are reduced into a partial differential equation with one dependent variable. The resulting non-linear partial differential equations are solved analytically using homotopy analysis method (HAM). The series solutions are developed and the convergence is properly discussed. The series solutions and graphs of velocity and temperature are constructed. Particular attention is given to the variations of emerging parameters such as second grade parameter, Prandtl and Eckert numbers.     

Heat transfer in MHD viscoelastic boundary layer flow over a stretching sheet with non-uniform heat source/sink

This paper presents the study of momentum and heat transfer characteristics in a hydromagnetic flow of viscoelastic liquid over a stretching sheet with non-uniform heat source, where the flow is generated due to a linear stretching of the sheet and influenced by uniform magnetic field applied vertically. Here an analysis has been carried out to study the effect of magnetic field on the visco-elastic liquid flow and heat transfer over a stretching sheet with non-uniform heat source. The non-linear boundary layer equation for momentum is converted into ordinary differential equation by means of similarity transformation and is solved exactly. Heat transfer differential equation is also solved analytically. The effect of magnetic field on velocity, skin friction and temperature profiles are presented graphically and discussed.     

Effect of Hall currents and chemical reaction on hydromagnetic flow of a stretching vertical surface with internal heat generation/absorption

The problem of steady, laminar, hydromagnetic, simultaneous heat and mass transfer by laminar flow of a Newtonian, viscous, electrically conducting and heat generating/absorbing fluid over a continuously stretching surface in the presence of the combined effect of Hall currents and mass diffusion of chemical species with first and higher order reactions is investigated. The fluid is permeated by a strong transverse magnetic field imposed perpendicularly to the plate on the assumption of a small magnetic Reynolds number. Certain transformations are employed to transform the governing differential equations to a local similarity form which are solved numerically. Comparisons with previously published work have been conducted and the results are found to be in good agreement. A parametric study is performed to illustrate the influence of the magnetic field parameter, Hall parameter, the coefficients of space-dependent and temperature-dependent internal heat generation/absorption, the chemical reaction parameter and order of reaction on the fluid velocity, temperature and concentration distributions. Numerical data for the local skin-friction coefficient, the local Nusselt number and the local Sherwood number have been tabulated for various values of parametric conditions.     

Effects of temperature-dependent viscosity and variable thermal conductivity on MHD non-Darcy mixed convective diffusion of species over a stretching sheet

A numerical model is presented to study the effects of temperature-dependent viscosity and variable thermal conductivity on mixed convection problem. Two important types of wall heating conditions namely, prescribed surface temperature and prescribed wall heat flux which arise in polymer industries are considered. The problem is solved numerically by using the fifth-order Runge–Kutta Fehlberg method with shooting technique. It is found that the Prandtl number is to decrease the skin friction coefficient, local Nusselt number and local Sherwood number. The effects of non-uniform heat source/sink and porous parameter are analyzed on velocity, temperature, skin friction co-efficient, Nusselt and Sherwood numbers.