Recent advances in the formation mechanisms of organized mesoporous materials

Since the discovery of the organized mesoporous solids by Mobil Oil Co. scientists, numerous patents and papers dealing with the synthesis, mechanisms of formation, properties and applications of these exciting solids have been published. A better understanding in the mechanisms of formation has been achieved through the use of in situ techniques of investigation. It appears that the mechanism depends much on the experimental conditions of synthesis. Even if the interaction between the inorganic precursor and the organic template is the key factor in the control of the formation of these materials, none of the proposed mechanisms provides an exclusive and definitive answer.     

Hard-sphere packing and icosahedral assembly in the formation of mesoporous materials

We report the synthesis and characterization of a novel mesoporous material with a face-centered cubic (fcc) symmetry and intrinsic bimodal pores. Moreover, an icosahedral (ICO) mesostructure with both meso- and macroscale 5-fold symmetry is observed. We propose a hard-sphere packing (HSP) mechanism for the formation of mesoporous materials by assuming preformed robust surfactant/silicate composite micelles being hard spheres. In comparison to the conventional liquid crystal templating (LCT) or cooperative self-assembly (CSA) mechanism, our contribution provides an important advancement of knowledge in the study of mesostructured materials.     

Reversible transitions between peptide nanotubes and vesicle-like structures including theoretical modeling studies

Peptide-based self-assembling systems are increasingly attractive because of their wide range of applications in different fields. Peptide nanostructures are flexible with changes in the ambient conditions. Herein, a reversible shape transition between self-assembled dipeptide nanotubes (DPNTs) and vesicle-like structures is observed upon a change in the peptide concentration. SEM, TEM, AFM, and CD spectroscopy were used to follow this transition process. We show that dilution of a peptide-nanotube dispersion solution results in the formation of vesicle-like structures, which can then be reassembled into the nanotubes by concentrating the solution. A theoretical model describing this shape-transition phenomenon is presented to propose ways to engineer assembling molecules in order to devise other systems in which the morphology can be tuned on demand.     

Spectroscopic monitoring for the formation of mesoporous MCM-41 materials upon microwave irradiation

The mesoporous MCM-41 materials were prepared in very short crystallization time (∼40 min) upon microwave irradiation in comparison with conventional hydrothermal heating method. With both microwave irradiation and hydrothermal heating, the MCM-41 formation via supramolecular templating method has been monitored by fluorescence and electron spin resonance (ESR) spectroscopy. Pyrene as a fluorescence probe and 4-(N,N-dimethyl-N-hexadecyl)ammonium-2,2,6,6-tetramethyl piperidinyloxy iodide (CAT16) as a spin probe were respectively dissolved into the micelle solutions to form the MCM-41 precursor gels. These probes allow the monitoring of the supramolecular interaction between the anionic silicate species and the cationic surfactant molecules during the MCM-41 formation. Analyses of fluorescence and ESR spectra indicate that the fast increase of hydrophobicity and microviscosity at the solubilzation sites of the probes results from the accelerated condensation of silicates onto the micelle surface upon microwave irradiation. The fluorescence change from the silicate L-center in the MCM-41 precursor gel also probes the fast silicate condensation upon microwave irradiation. It seems that the fast formation of MCM-41 upon microwave irradiation is ascribed to the microwave-susceptible head groups of surfactant molecules in addition to fast dissolution of the precursor gel.     

Resolving intermediate solution structures during the formation of mesoporous SBA-15

The evolution of the solution microstructures during the formation of the hexagonal mesoporous material SBA-15 was studied by direct imaging and freeze-fracture replication cryo-TEM. A reaction mixture was sampled at different times after the addition of tetramethoxyorthosilane (TMOS) to an acidic solution of Pluronic P123 held at 50 degrees C. Solution microstructures were detected by direct imaging cryo-TEM in the time window of 6.5-40 min after the addition of the TMOS (t = 0). The micrographs revealed that the initial spheroidal micelles evolve into threadlike micelles, which become longer and straighter with time. Then bundles with the dimensions similar to those found in the final material appeared, although there was no sign of a hexagonal arrangement up to 40 min. Due to the appearance of a precipitate at 40 min the sample became too viscous, preventing clear observation of its content. To observe the structures present after 40 min, freeze-fracture replication was carried out as well. Such samples were collected also at 22 min and showed the presence of threadlike micelles in agreement with the direct imaging cryo-TEM micrographs. The 2 h samples showed some areas of hexagonal ordered structures, which become very clear at 2 h 50 min. The cryo-TEM measurements were carried out under the same reaction conditions used in earlier in situ EPR experiments, thus allowing us to correlate molecular level events with the microstructure shape evolutions. This showed that the elongation of the micelles is a consequence of a reduction of the polarity and the water content within the micelles due to silicate adsorption and polymerization. Similar experiments were carried out also on SBA-15 prepared with HCl and TMOS at 35 degrees C. The appearance of threadlike micelles, followed by clustering of the TLMs, was observed under these conditions as well, but the reaction rate was faster. This suggests that the observed mechanism for the formation of SBA-15 is general.     

Argon and krypton adsorption on templated mesoporous silicas: molecular simulation and experiment

In this work we report molecular simulation results for argon and krypton adsorption on atomistic models of templated mesoporous silica materials. These models add atomistic levels of detail to mesoscale representations of these porous materials, which were originally generated from lattice Monte Carlo simulations mimicking the synthesis process of templated mesoporous silicas. We generate our atomistic pore models by carving out of a silica block a ‘mathematically-smooth’ representation of the pores from lattice MC simulations. Following that procedure, we obtain a model material with mean mesopore and micropore diameters of 5.4 nm and 1.1 nm, respectively (model A). Two additional model materials were considered: one with no microporosity, and with mesopores similar to those of model A (model B), and a regular cylindrical pore (model C). Simulation results for Ar and Kr adsorption on these model materials at 77 K and 87 K shows that model A provides the best agreement with experimental data; however, our results suggest that fine-tuning the microporosity and/or the surface chemistry (i.e., by decreasing the density of OH groups at the pore surface) of model A can lead to better agreement with experiments. The filling of the mesopores in model materials A and B proceeded via a classical capillary condensation mechanism, where the pores fill at slightly different pressures. This observation contrasts with what was observed in our previous study (Coasne, et al. in Langmuir 22:194–202, 2006), where we considered atomistic silica mesopores with an important degree of surface roughness at length scales below 10 Å, for which we observed a quasi-continuous mesopore filling involving intermediate phases with liquid-like “bridges” and gas-like regions. These results suggest that pore surface roughness, and other morphological features such as constrictions, play an important role in the mechanism of adsorption and filling of the mesopores.     

The effect of the counteranion on the formation of mesoporous materials under the acidic synthesis process

The presence of various counteranions at the interfacial region of the silicate-surfactant mesophase introduces opportunities for manipulation of the phase structure. Well-ordered 3D-hexagonal P63/mmc, cubic Pmn, 2D-hexagonal p6mm, and cubic Iad mesoporous materials have been synthesized with the same surfactant, cetyltriethylammonium bromide, in the presence of various acids. The counteranions of acidic media have resulted in increasing the surfactant packing parameter g in the order SO42- < Cl- < Br- < NO3-, which leads to the different time course of formation of mesostructures. The effect of counteranions on the formation of mesostructures is explained in terms of not only the adsorption strength on the headgroups of the surfactant micelle but also the rate of silica condensation affecting the charge density matching between the surfactant and silica. It has been found that the mesophase is always transformed from the larger g parameter into the smaller one. The distinct morphologies of the 3D-hexagonal P63/mmc mesophases have been rationally explained by supposing this particular mesostructure. The cubic Iad phase has been first synthesized under acidic conditions.     

Anatase formation during the synthesis of mesoporous titania and its photocatalytic effect

Thermally stable mesoporous titania can be synthesized following different synthesis routes. In this paper, mesoporous titania was synthesized applying the evaporation-induced self-assembly (EISA) method. The mesostructured titania was treated with an NH(4)OH solution to increase the thermal stability. The influence of this postsynthesis treatment on the anatase formation was investigated using different initial synthesis conditions. Mesoporous titania was synthesized under both acidic and basic conditions, with hexadecylamine and cetyltrimethylammonium bromide as surfactants. The samples were investigated with FT-Raman to investigate when exactly anatase was formed during the synthesis. It will be shown that the anatase formation depends mainly on the initial synthesis conditions. This study shows that anatase can already be formed before calcination under certain circumstances. Furthermore, the accessibility of the anatase phase influenced the photocatalytic activity.     

Supercritical carbon dioxide processing of fluorinated surfactant templated mesoporous silica thin films

The effect of processing mesoporous silica thin films with supercritical CO2 immediately after casting is investigated, with a goal of using the penetration of CO2 molecules in the tails of fluorinated surfactant templates to tailor the final pore size. Well-ordered films with two-dimensional hexagonal close-packed pore structure are synthesized using a cationic fluorinated surfactant, 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl)pyridinium chloride, as a templating agent. Hexagonal mesopore structures are obtained for both unprocessed films and after processing the cast films in CO2 at constant pressure (69-172 bar) and temperature (25-45 degrees C) for 72 h, followed by traditional heat treatment steps. X-ray diffraction and transmission electron microscopy analysis reveal significant increases in pore size for all CO2-treated thin films (final pore diameter up to 4.22 +/- 0.14 nm) relative to the unprocessed sample (final pore diameter of 2.21 +/- 0.20 nm) before surfactant extraction. Similar pore sizes are obtained with liquid and supercritical fluid treatments over the range of conditions tested. These results demonstrate that combining the tunable solvent strength of compressed and supercritical CO2 with the "CO2-philic" nature of fluorinated tails allows one to use CO2 processing to control the pore size in ordered mesoporous silica films.     

Preparation of ordered mesoporous SiC from preceramic polymer templated by nanoporous silica

Highly ordered mesoporous SiC materials were prepared by infiltrating viscous liquid preceramic polymer, allylhydridopolycarbosilane, into two types of surface modified nanoporous silica templates: mesoporous silica SBA-15 and mesocellular siliceous foam. The silica templates were subsequently etched off after pyrolysis at 1000 degrees C under nitrogen atmosphere with the resultant formation of ordered mesoporous structures. The mesoporous SiC materials, synthesized from both types of templates possessed high Brunauer-Emmett-Teller (BET) surface areas in the range of 250-260 m(2)/g with pore sizes of 3.4-3.6 nm. The ordered structures of mesoporous SiC were exact inverse replicas of their respective silica templates, as characterized by small angle X-ray diffraction (XRD), transmission electron microscope (TEM) images, and the adsorption-desorption isotherm of nitrogen.     

The special features of formation of nanotubes and mesoporous materials on the basis of vanadium oxides

The influence of synthesis conditions and Mg²⁺, Co²⁺, and Zn²⁺ admixtures on the formation of lamellar, cubic, and hexagonal mesophases was studied. After calcining at 653 K in an argon flow, the mesophases transformed into mesoporous materials with D _pore = 27–80 Å, V _pore = 0.10–0.30 cm³/g, and s _BET = 80–200 m²g. Nanotubes based on mesostructural lamellar vanadium oxide with inside diameters of from 100 to 500 Å were obtained in the presence of several amines as templates.     

Copper-based nanowire materials: templated syntheses, characterizations, and applications

Well-aligned Cu(OH)2 nanoribbon and CuO nanorod arrays have been prepared on copper substrates by liquid-solid reactions. The effects of temperature, reaction time, solvent, and pH value on the morphology and composition of the products are systematically studied. Using the Cu(OH)2 nanoribbons array as a reactive and sacrificial template, we have successfully synthesized Cu2O, Cu9S8, and Cu nanoribbon/ nanowire arrays, demonstrating the versatility of the template. The extensive series of copper-based one-dimensional nanomaterials have been fully characterized by various structural, microscopic, and spectroscopic techniques. Moreover, the Cu nanowires are demonstrated to be an excellent surface-enhanced Raman scattering substrate with a sensitivity over an order of magnitude higher than that of a common roughened copper electrode.     

Characterization of covalent linkages in organically functionalized MCM-41 mesoporous materials by solid-state NMR and theoretical calculations

The covalent linkages formed during functionalization of MCM-41 mesoporous molecular sieves with five chloroalkylsilanes ((EtO)3Si(CH2Cl), (MeO)3Si(CH2CH2CH2Cl), Cl3Si(CH2CH2CH3), Cl2Si(CH3)(CH2Cl) and Cl2Si(CH3)2) have been investigated using high-resolution solid-state NMR spectroscopy and DFT calculations. Structural information was obtained from 1H-13C and 1H-29Si heteronuclear (HETCOR) NMR spectra, in which high resolution in the 1H dimension was obtained by using fast MAS. The 1H-13C HETCOR results provided the assignments of 1H and 13C resonances associated with the surface functional groups. Sensitivity-enhanced 1H-29Si HETCOR spectra, acquired using Carr-Purcell-Meiboom-Gill refocusing during data acquisition, revealed the identity of 29Si sites (Qn, Tn, and Dn) and the location of functional groups relative to these sites. Optimal geometries of local environments representing the Qn, Tn and Dn resonances were calculated using molecular mechanics and ab initio methods. Subsequently, DFT calculations of 29Si, 13C, and 1H chemical shifts were performed using Gaussian 03 at the B3LYP/6-311++G(2d,2p) level. The theoretical calculations are in excellent accord with the experimental chemical shifts. This work illustrates that state-of-the-art spectroscopic and theoretical tools can be used jointly to refine the complex structures of inorganic-organic hybrid materials.     

Evidence for vesicle formation during the synthesis of catanionic templated mesoscopically ordered silica as studied by Cryo-TEM

The formation of vesicles during the synthesis of mesostructured surfactant-silicate materials has been evidenced for the first time by applying in situ Cryo-TEM. A mixture of anionic and cationic surfactants was used to fine-tune the packing parameter of the supramolecular surfactant assembly. It is shown that the vesicles are formed during the course of the reaction and suggested to be a consequence of silicate condensation reactions. Furthermore, the study confirms earlier suggestions that the silicate-surfactant micelles are capable of solubilizing hydrophobic additives during the early stages of the reaction.     

Opal gel templated synthesis of oblate titania opal materials

Ordered arrays of oblate titania bodies were template synthesized using opal gel templates under uniaxial compression at ambient temperature during the favorable titania sol/gel process. The aspect ratio was controllable by the compression degree.     

Polymerization of diacetylenes by hydrogen bond templated adlayer formation

Adlayers were formed on self-assembled monolayers (SAMs) formed by alkanethiols on gold. Base SAMs exposing amide functional groups at the SAM surface were formed with 12-mercaptododecanamide. Adlayers of diacetylene-containing monomers were then formed via amide hydrogen bonding in decalin and decalin/toluene mixtures. Grazing angle FTIR, contact angle measurements, and ellipsometry suggest that these adlayer films exhibit ordering and packing similar to that of SAMs on gold. Resonance Raman spectroscopy showed that these diacetylene adlayers could be readily polymerized by exposure to UV light.