Flow methods in chiral analysis

The methods used for the separation and analytical determination of individual isomers are based on interactions with substances exhibiting optical activity. The currently used methods for the analysis of optically active compounds are primarily high-performance separation methods, such as gas and liquid chromatography using chiral stationary phases or chiral selectors in the mobile phase, and highly efficient electromigration techniques, such as capillary electrophoresis using chiral selectors. Chemical sensors and biosensors may also be designed for the analysis of optically active compounds.     

How to validate analytical methods

The requirement for laboratories to use a `fully validated' method of analysis is now accepted or required in many sectors of analysis. Fully validated means that a method must have been assessed in a collaborative trial. The significance of these requirements is described because analysts will increasingly be required to justify their choice of method in the light of them. In addition, the requirements and procedures that may be used to obtain methods that have been validated `in-house', without full validation through collaborative trial, are also outlined in the article, these pointing the way to international acceptance of such methods in future as the cost of carrying out full validation of methods through collaborative trials becomes prohibitory.     

Moving from official to traceable methods

The primary purpose in performing analysis is to obtain information on which information decisions can be made. This article will discuss the principles of the concept `moving from official to traceable methods', where traceable methods are validated methods which are not published as official/standard methods.     

Recent applications of kinetic methods in multi-component analysis

This review on multi-component kinetic-based determinations covers most publications in this field during the period 2000–2007. The methodologies applied during recent years have been based on differential reaction rates for simultaneous multicomponent analysis. The literature shows a great attempt to apply chemometric methods, such as partial least squares regression, artificial neural networks, H-point standard addition and a new method involving mean centering of ratio spectra in this field. This review also describes some applications of advanced multiway analysis such as PARAFAC and NPLS from 2000 in the multicomponent kinetic analysis.     

Sacrificial layer microfluidic device fabrication methods

Over the past 15 years, research in the field of microfluidics has experienced rapid growth due to significant potential advantages such as low cost, short analysis times, and elimination of sources of contamination. Although etched and thermally bonded glass substrates have seen widespread use and offer solid performance, device fabrication still remains cumbersome. Recent advances in sacrificial layer microfabrication methods for microfluidics have overcome many disadvantages of conventional fabrication approaches. Phase-changing sacrificial layers have been implemented in making inexpensive and high-performance polymer microchips for electrophoretic analysis, protein focusing, and sample preconcentration. In addition, novel channel fabrication methods based on standard thin-film processes, which are readily integratable with microfabrication techniques used for electrical components, are being applied increasingly for the creation of microfluidic devices. These new sacrificial layer fabrication approaches will be instrumental in making low-cost and high-quality polymer microchips, and in interfacing electrical and fluidic systems on glass or semiconductor substrates.     

An overview on enrichment methods for cell surface proteome profiling

Cell surface proteins are essential for many important biological processes, including cell–cell interactions, signal transduction, and molecular transportation. With the characteristics of low abundance, high hydrophobicity, and high heterogeneity, it is difficult to get a comprehensive view of cell surface proteome by direct analysis. Thus, it is important to selectively enrich the cell surface proteins before liquid chromatography with mass spectrometry analysis. In recent years, a variety of enrichment methods have been developed. Based on the separation mechanism, these methods could be mainly classified into three types. The first type is based on their difference in the physicochemical property, such as size, density, charge, and hydrophobicity. The second one is based on the bimolecular affinity interaction with lectin or antibody. And the third type is based on the chemical covalent coupling to free side groups of surface‐exposed proteins or carbohydrate chains, such as primary amines, carboxyl groups, glycan side chains. In addition, metabolic labeling and enzymatic reaction‐based methods have also been employed to selectively isolate cell surface proteins. In this review, we will provide a comprehensive overview of the enrichment methods for cell surface proteome profiling.     

Usefulness of capability indices in the framework of analytical methods validation

Analytical methods capability evaluation can be a useful methodology to assess the fitness of purpose of these methods for their future routine application. However, care on how to compute the capability indices have to be made. Indeed, the commonly used formulas to compute capability indices such as Cpk, will highly overestimate the true capability of the methods. Especially during methods validation or transfer, there are only few experiments performed and, using in these situations the commonly applied capability indices to declare a method as valid or as transferable to a receiving laboratory will conduct to inadequate decisions.     

干果类食品的样品前处理与分析检测方法研究进展

坚果、果脯等干果类食品含有丰富的营养成分,深受国内外广大消费者的喜爱。但这些食品在果实生产、加工、储运时会使用农药或产生霉变等,造成干果中农药、重金属、霉菌毒素或添加剂等有害成分残留,甚至超过国家限量要求,带来严重的食品安全问题。因此,加强干果类食品的质量监督具有重要的经济和社会意义。但干果类食品基质复杂,有害物质种类多,结构和性质差异大,含量低,其分析检测需要快速高效的样品前处理技术和准确灵敏的分析检测方法。该文主要综述了近十年来干果类食品中有害物质的样品前处理及分析检测方法研究进展。其中样品前处理方法主要包括各种场辅助萃取法、相分离法和衍生化萃取方法等。场辅助萃取法主要是借助超声波和微波场等外场(协同)作用加快干果中有害物质的溶出速度,提高其萃取效率。相分离法,包括固相(微)萃取、分散固相萃取和液相(微)萃取法等,具有溶剂消耗少、分离富集效率高的优势,是干果样品分析中较常使用的前处理方法。该文还重点介绍了干果中各类有害成分分析检测技术,主要包括色谱、原子光谱、无机质谱、电化学分析等常规实验室方法,以及一些适用于现场分析的快速检测技术,并以此为基础,展望了干果类食品中有害物质分析检测技术的发展趋势。     

Infrared methods for high throughput screening of metabolites: food and medical applications

Chemical and physiological properties are related to individual or bioactive compounds such as essential oils, terpenoids, flavonoids, volatile compounds and other chemicals which are present in natural products in low concentrations (e.g. ppm or ppb). For many years, classical separation, chromatographic and spectrometric techniques such as high performance liquid chromatography (HPLC), gas chromatography (GC), liquid chromatography (LC) and mass spectrometry (MS) have been used for the elucidation of isolated compounds from different matrices. Hence, the use of standard separation, chromatographic and spectrometric methods was found useful in chemical and both plant and animal physiology studies, for fingerprinting and comparing natural and synthetic samples, as well as to identify single active compounds. It has been generally accepted that a single analytical technique will not provide sufficient visualization of the metabolome, hence holistic techniques are needed for comprehensive analysis. In the last 40 years near infrared (NIR) spectroscopy became one of the most attractive and used methods of analyzing agricultural related products and plant materials which provide simultaneous, rapid and non-destructive quantitation of major. This technique has been reported to determine other minor compounds in plant materials such as volatile compounds and elements. The aim of this short review is to describe some recent applications of NIR spectroscopy combined with multivariate data analysis for high throughput screening of metabolites with an emphasis on food and medical applications.     

CE methods applied to the analysis of micronutrients in foods

This article reviews the applications of CE that are relevant to the analysis of small molecules in foods. CE has been applied to a wide range of important areas of food analysis and is rapidly being established as an alternative technique to chromatographic methods including HPLC and GC within analytical food and research laboratories. In recent years the analysis of food by CE has become more frequent and important and as such a variety of compounds have been separated and quantified. Although many other analytes have been detected by CE, this review will highlight areas relating primarily to the rather broad chemical classes of free amino acids, carbohydrates, organic acids, vitamins and a variety of antioxidants. In addition, information relating to the analyte, sample matrix, mode of CE employed, scope of the methodology and the detection and derivatization of the small molecules are considered and discussed.     

Analysis of cyanobacterial pigments and proteins by electrophoretic and chromatographic methods

Cyanobacteria are a diverse and ubiquitous group of prokaryotes with several unifying features. Amongst these is the macromolecular structure known as the phycobilisome, which is composed of water-soluble phycobiliproteins covalently bound by linker peptides or proteins in a configuration designed to optimize energy transfer to the photosynthetic reaction center of the organism. Phycobiliproteins are highly fluorescent by virtue of their covalently bound, linear tetrapyrrole chromophores known as bilins. Analysis of these prosthetic pigments, along with other non-water soluble pigments, such as the chlorophylls and carotenoids, can provide insight into microbial diversity. The effects of environmental growth conditions and stresses can also be probed by measuring pigment and protein concentrations. This review will focus, therefore, on applications of various chromatographic and electrophoretic methods for the analysis of cyanobacterial pigment and protein constituents. Although the greatest emphasis will be placed on the measurement of bilins and phycobiliproteins, this review will also consider other pigments and proteins important to cyanobacterial growth and survival, such as chlorophyll a, carotenoids, ectoenzymes, linker and membrane proteins, and extracellular proteins.     

Analytical methods for abused drugs in hair and their applications

Hair has been focused on for its usability as an alternative biological specimen to blood and urine for determining drugs of abuse in fields such as forensic and toxicological sciences because hair can be used to elucidate the long intake history of abused drugs compared with blood and urine. Hair analysis consists of several pretreatment steps, such as washing out contaminates from hair, extraction of target compounds from hair, and cleanup for instrumental analysis. Each step includes characteristic and independent features for the class of drugs, e.g., stimulants, narcotics, cannabis, and other medicaments. In this review, recently developed methods to determine drugs of abuse are summarized, and the pretreatment steps as well as the sensitivity and applicability are critically discussed.     

I. Numerical nonlinear analysis: differential methods and optimization applied to chemical reaction rate determination

The primary emphasis of this work on kinetics is to illustrate the a posteriori approach to applied nonlinear analysis, where focus on data may also lead to novel outcomes, as may also be the case with the current a priori tendencies of applied analysis, which relies on axioms or constructs concerning the nature of the observable. Here, methods for the determination of chemical rate constants are developed and discussed utilizing nonlinear analysis which does not require exact knowledge of initial reactant concentrations. These methods are compared with those derived from standard methodology for known chemical reactions studied by eminent kineticists and in one case with a reaction whose initial reactant concentration was in doubt. These gradient methods are shown to be consistent with the standard methods on average, and could readily serve as alternatives for standard conditions and can be used for studies where there are limits or unknowns in the initial conditions, such as in the burgeoning fields of astrophysics and astrochemistry, forensics, archeology and biology where the standard methods are not applicable. All four reactions studied exhibited semi-sinusoidal-like change with reactant concentration change which standard integral methods have not highlighted, and which seems to constitute the observation of a new effect. Reasons based on two mechanisms are given for this observation, and experiments are suggested that can discriminate between these two factors. Although first and second order reactions were investigated here, the method applies to arbitrary fractional orders by polynomial expansion of the rate decay curves where closed form integrated expressions do not exist at present. Integral methods for the above will be investigated next.     

Uncommon multivariate statistical methods for environmental studies: A review

In this paper we describe the characteristics and the applications of the multivariate methods for spectroscopic and chromatographic techniques independent component analysis (ICA) and two-dimensional correlation spectroscopy (2DCOS) focused to their use in environmental studies. In our opinion, these methods are important because they allow to characterize environmental samples with different aims and scopes from those generally obtained by means of more common multivariate methods such as principal component analysis (PCA) and partial least squares (PLS). The new insights of these methods in recent environmental studies are reviewed and debated.     

Quantifying the measurement uncertainty of results from environmental analytical methods

The Eurachem-CITAC Guide Quantifying Uncertainty in Analytical Measurement was put into practice in a public laboratory devoted to environmental analytical measurements. In doing so due regard was given to the provisions of ISO 17025 and an attempt was made to base the entire estimation of measurement uncertainty on available data from the literature or from previously performed validation studies. Most environmental analytical procedures laid down in national or international standards are the result of cooperative efforts and put into effect as part of a compromise between all parties involved, public and private, that also encompasses environmental standards and statutory limits. Central to many procedures is the focus on the measurement of environmental effects rather than on individual chemical species. In this situation it is particularly important to understand the measurement process well enough to produce a realistic uncertainty statement. Environmental analytical methods will be examined as far as necessary, but reference will also be made to analytical methods in general and to physical measurement methods where appropriate. This paper describes ways and means of quantifying uncertainty for frequently practised methods of environmental analysis. It will be shown that operationally defined measurands are no obstacle to the estimation process as described in the Eurachem/CITAC Guide if it is accepted that the dominating component of uncertainty comes from the actual practice of the method as a reproducibility standard deviation.     

DNA methods: critical review of innovative approaches

The presence of ingredients derived from genetically modified organisms (GMOs) in food products in the market place is subject to a number of European regulations that stipulate which product consisting of or containing GMO-derived ingredients should be labeled as such. In order to maintain these labeling requirements, a variety of different GMO detection methods have been developed to screen for either the presence of DNA or protein derived from (approved) GM varieties. Recent incidents where unapproved GM varieties entered the European market show that more powerful GMO detection and identification methods will be needed to maintain European labeling requirements in an adequate, efficient, and cost-effective way. This report discusses the current state-of-the-art as well as future developments in GMO detection.     

Cathode materials for lithium ion batteries prepared by sol-gel methods

Improving the preparation technology and electrochemical performance of cathode materials for lithium ion batteries is a current major focus of research and development in the areas of materials, power sources and chemistry. Sol-gel methods are promising candidates to prepare cathode materials owing to their evident advantages over traditional methods. In this paper, the latest progress on the preparation of cathode materials such as lithium cobalt oxides, lithium nickel oxides, lithium manganese oxides, vanadium oxides and other compounds by sol-gel methods is reviewed, and further directions are pointed out. The prepared products provide better electrochemical performance, including reversible capacity, cycling behavior and rate capability in comparison with those from traditional solid-state reactions. The main reasons are due to the following several factors: homogeneous mixing at the atomic or molecular level, lower synthesis temperature, shorter heating time, better crystallinity, uniform particle distribution and smaller particle size at the nanometer level. As a result, the structural stability of the cathode materials and lithium intercalation and deintercalation behavior are much improved. These methods can also be used to prepare novel types of cathode materials such as nanowires of LiCoO₂ and nanotubes of V₂O₅, which cannot be easily obtained by traditional methods. With further development and application of sol-gel methods, better and new cathode materials will become available and the advance of lithium ion batteries will be greatly promoted.     

Chemical and physical methods for characterisation of biofilms

Research on biofilms has developed into interdisciplinary work, in which scientists from different fields are involved. This review summarizes the state- of-the-art including models due to different aspects of biofilms. Techniques for characterization of surfaces and interfaces, e.g. microscopic, spectroscopic and microsensoric methods will be presented. In addition, procedures that involve sampling of biofilms and subsequent separation of the components for their analysis are a part of this article. Analytical methods are summarized for the investigation of extracellular polymeric substances (EPS), mainly polysaccharides beside proteins in the microbial host. Finally, procedures for the analysis of minerals as components of biofilms are presented.     

Numerical solution of the nonlinear Poisson–Boltzmann equation: Developing more robust and efficient methods

We present a robust and efficient numerical method for solution of the nonlinear Poisson-Boltzmann equation arising in molecular biophysics. The equation is discretized with the box method, and solution of the discrete equations is accomplished with a global inexact-Newton method, combined with linear multilevel techniques we have described in an article appearing previously in this journal. A detailed analysis of the resulting method is presented, with comparisons to other methods that have been proposed in the literature, including the classical nonlinear multigrid method, the nonlinear conjugate gradient method, and nonlinear relaxation methods such as successive overrelaxation. Both theoretical and numerical evidence suggests that this method will converge in the case of molecules for which many of the existing methods will not. In addition, for problems which the other methods are able to solve, numerical experiments show that the new method is substantially more efficient, and the superiority of this method grows with the problem size. The method is easy to implement once a linear multilevel solver is available and can also easily be used in conjunction with linear methods other than multigrid. © 1995 by John Wiley & Sons, Inc.     

Analytical methods to differentiate Romanian amber and Baltic amber for archaeological applications

The study aims to establish several definite criteria which will differentiate Romanian amber and Baltic amber to certify the local or Baltic origin of the materials found in archaeological sites on the Romanian territory, by using light microscopy and performing analytical methods, such as Fourier transform infrared spectroscopy-variable angle reflectance and liquid chromatography with mass spectrometry detection. Experiments especially by Fourier transformed infrared spectroscopy, were applied to a wide range of samples with controlled origin. The methods were optimised and resulted in premises to apply the techniques to analysis of the archaeological material.