Benzobistriazolophenanthroline polymers

The polycondensation of aromatic dihydrazidines (bisamidrazones) with 1,4,5,8-naphthalenetetracarboxylic acid or 1,4,5,8-naphthalenetetracarboxylic dianhydride in polyphosphoric acid led to high yields of soluble benzobistriazolophenanthroline polymers. Inherent viscosities in methanesulfonic acid of 0.25–2.51 dl g were recorded. Prior to polymer synthesis, a series of model compounds were prepared by reactions analogous to the polycondensation reaction. The polymer structure was established by elemental analysis and spectral comparisons of the polymers with model compounds. The thermal properties of the polymers were studied by thermal gravimetric analysis, differential thermal analysis, differential scanning calorimetry, and softening under load. Onset of breakdown in an air atmosphere occurs in the 440–450°C range. No softening under load was observed up to 450°C.     

Evaluation of the thermal stabilities of some aromatic hydroxy- and amine-type antioxidants

This paper discusses the evaluation of the thermal stabilities of some additives usually incorporated as antioxidants in mineral oils and lubricating greases. They include aromatic hydroxy and amine type organic compounds. The results of this thermoanalytical investigation, which was performed in a differential scanning calorimeter under ambient atmosphere and thermogravimetrically under an inert atmosphere of nitrogen gas, showed that the hydroxy-derived compounds, which are based on the quinolinic skeleton, to be of the highest thermal stability compared to those of the other additives studied.     

Comparative study on thermal degradation of some new diazoaminoderivatives under air and nitrogen atmospheres

The article is devoted to a comparative study on the thermal degradation of some new diazoaminoderivatives under both air and nitrogen atmosphere by TG-FTIR analysis. The TG–DTG–DTA curves show the thermal degradation in air to present two temperature domains: an endothermic one identical to the case of the degradation under nitrogen and an exothermic one which is not to be found under nitrogen atmosphere. The identification of the gaseous species released by degradation in air within the endothermic domain made evident the presence of the same components of the degradation in nitrogen atmosphere. In the exothermic domain of the sample degradation in air, the CO₂, H₂O, SO₂ species result by the burning of the molecular residues of the first domain. The obtained results afforded a degradation mechanism to be advanced that coincide for the endothermic domain with that of degradation under nitrogen atmosphere. Due to the importance of these compounds as possible reaction initiators and also as potentially bioactive substances (herbicides, acaricides, fungicides), the study on their thermal degradation could give useful information on the environmental impact of the degradation products resulting by the thermal processing of the plants which could possible retain these compounds, when the initial degradation temperature is exceeded.     

Pyrolysis study of hydrophobic tholins By TG-MS, TG, DTA and DSC methods

This study presents the thermogravimetry (TG) of hydrophobic tholins, obtained from different simulation experiments of prebiotic synthesis carried out in a CH₄/N₂/H₂ atmosphere with spark discharge activation of aqueous aerosols and liquid water. Differential thermal analysis and differential scanning calorimetry were also used to evaluate the thermal behaviour of these complex organic compounds that could play an important role in prebiotic chemistry. A coupled thermogravimetry-mass spectrometry system allowed us to analyse the principal volatile thermal decomposition and fragmentation products of the hydrophobic tholins under dynamic conditions and an inert atmosphere. During their thermal degradation, which occurs in two stages, a wide variety of hydrocarbon products including methane, vinyl monomers (such as ethylene and propylene), acetylene, oligomers, and some other unknown compounds are found. Besides, a thermally stable structure is present (graphitic structure) in these particular organic substances. Finally, data collected from TG experiments in an oxidative atmosphere showed significant differences at temperatures above 240 °C. According to these results, the different techniques of thermal analysis here applied have proved to be an adequate methodology for the study and characterization of these complex systems, structures of which remain controversial even in these days.     

Thermal behavior of residues (sludge) originating from the sugarcane industry

The Brazilian sugarcane industry shows a great amount of generated sludge which should be utilized adequately. Two sludge samples, aerobic and anaerobic, were collected. Both were evaluated by thermogravimetry and differential thermal analysis (DTA) as well as X-ray power diffraction. These compounds show variations of mass between 30 and 140 °C due to the dehydration stage. The DTA curves show that the compounds have an exothermic reaction between 450 and 550 °C, which indicates that this can be used as an energy source. Details concerning the kinetic parameters of the dehydration and thermal decomposition have also been described here. The kinetic study of these stages was evaluated in open crucibles under nitrogen atmosphere. The obtained data were evaluated with the isoconversional kinetic method. The results show that different activation energies were obtained for thermal decomposition.     

Study of the thermal behavior of Al(III) and In(III)-diclofenac complexes in solid state

The Al and In-diclofenac compounds were prepared. Thermogravimetry (TG) and X-ray diffraction powder patterns were used to characterize these compounds. Details concerning the dehydration and thermal decomposition as well as data of kinetic parameters have been described here. The kinetic studies of these stages were evaluated from several heating rates with mass sample of 2 and 5 mg in open crucibles under nitrogen atmosphere. The results of the present study improve the knowledge on these compounds including their dehydration and thermal stability. The obtained data leads to a dependence on the sample mass, which results in two kinetic behavior patterns.     

稳定同位素方法研究正构烷烃与四氢萘二元体系的反应

以正构烷烃作为模型化合物的热反应、临氢反应、临氢催化反应中,添加供氢剂抑制正构烷烃所裂化;气相氢和供氢剂的供氢参与饱和烯烃,两者是性质不同的氢源,前者加速裂化,后者抑制裂化。供氢剂供氢行为依赖于反应体系自由基的多少和温度以及反应过程,反应体系较多的自由基和较高的反应温度有利于供氢行为。稳定同位素方法研究模型化合物的裂化反应表明,供氢剂的作用是通过脱氢湮灭自由基来抑制裂化反应,同时发现H12－四氢萘和D12－四氢萘的供氢（氘）率上存在着动力学同位素效应,在临氢及临氢催化体系中尤其是临氢催化体系中,动力学同位素效应变得不再明显。     

Monitoring of thermal behavior and decomposition products of soybean oil

The thermal degradation and corresponding decomposition products of fresh and heat-treated soybean oil were investigated by synchronous thermal analyzer combined with Fourier transform infrared spectrometry and quadrupole mass spectrometry (STA–FTIR–QMS). Two longtime heat-treated soybean oil samples were aforehand prepared by consistently heating the fresh soybean oil for 50 and 100 h, respectively. N₂ and simulative air (N₂/O₂ = 4:1, volume) were used as the thermal reaction gas atmosphere. The results showed that one stage of mass loss appeared in analysis of the all oil samples under N₂ atmosphere condition and longtime heat pre-treatment had no effect on the thermal behavior of the soybean oil under N₂ atmosphere condition. However, four stages occurred in analysis of both untreated and heat-treated oil samples under the simulative air atmosphere condition. Longtime heat pre-treatment influenced the thermal behavior of the soybean oil in certain extent, which was reflected in the different mass loss values of the four stages. According to the infrared absorption profiles and MS spectra of the released compounds in vapor phase, H₂O, CO, CO₂, hydrocarbons (such as CH₄), and hydroxyl, carbonyl, and carboxyl-contained compounds have been confirmed. Therefore, STA–FTIR–QMS can be suggested as a promising technique for investigating of thermal degradation and monitoring the decomposition products of the evolving substances in edible oils.     

Pyrolysis—gas chromatography—mass spectrometry of model compounds from coal hydrogenates: Part III. Sulphur compounds

A pyrolysis—gas chromatography—mass spectrometry study of some model sulphur compounds encountered in coal hydrogenates was performed in order to determine the fate of the sulphur during thermal cracking in an inert atmosphere. Heterocyclic sulphur compounds such as thiophene, 3-methylthiophene and benzothiophene were thermally more stable than thiophenol and 4-methylthiophenol. For all these compounds, the first pyrolysis step was a dimerization reaction. Desulphurization was always unimportant and therefore the amounts of desulphurized light aromatic hydrocarbons obtained were always very low. Several cracking mechanisms are proposed.     

Thermal and spectroscopic studies of 2,3,5-trisubstituted and 1,2,3,5-tetrasubstituted indoles as non-competitive antagonists of GluK1/GluK2 receptors

This paper reports the thermal stability and thermal degradation of six derivatives of indole by means of TG-DSC (in air) and TG-FTIR (in nitrogen) techniques. The compounds were also characterized by infrared spectroscopy. In addition, IR spectra were calculated and compared with the experimental data. In particular, the potential energy distribution analysis was performed to assign IR signals. The studied compounds are characterized by good thermal stability in oxidizing and inert atmospheres which is important for potential medical application. Thermogravimetric measurements in air atmosphere showed that the decomposition of compounds proceeds in two or three main stages. The thermal degradation of compounds is preceded by the melting process. The pyrolysis of samples is a one-step process. Together with the analyses performed in nitrogen, the FTIR spectra of the evolved gas phase products were recorded. On the FTIR spectra of gaseous products, only the bands of water, carbon dioxide and carbon oxide molecules are present. In the case of indole derivatives containing the p-chlorobenzyl substituent in position 1, the bands of anisole, p-chlorotoluene and chlorobenzene also appear.     

［Mo_3（μ_3－O）（μ－Cl）_3（μ－O_2CR）_3Cl_3］~－系列三核钼的电化学及热化学性质的研究

用循环伏安法研究了［Ｍｏ_３ＯＣｌ_６（Ｏ_２ＣＲ）_３］－（其中Ｒ＝ＣＨ_３，Ｈ，ＣＨ_２Ｃｌ）系列三核钼簇合物在ＣＨ_３ＣＮ和ＤＭＦ溶剂中的电化学行为，并用差热－热重手段研究了它们的热稳定性和热分解过程的可能机理。结果表明在不同溶剂中它们有相似的二对氧化还原峰，而且在同一溶剂中随着Ｒ基团吸电子能力的增强，相应的第一氧化还原电位值向正向移动。当Ｒ＝ＣＨ_３，Ｈ时，它们的起始分解温度分别为２６５℃和２１０℃，即同样随着Ｒ基团吸电子能力的增强，起始分解温度降低。     

Thermal Behavior of Sr(II) and Ba(II)‐Diclofenac Complexes in Solid State: Study of the Dehydration and Thermal Decomposition

Solid state compounds of general formula Sr(Diclof)₂·5.7H₂O and Ba(Diclof)₂·4.8H₂O were obtained. Thermogravimetry (TG), differential scanning calorimetry (DSC), X‐ray diffraction powder patterns and microscopy analysis were used to characterize these compounds. Details concerning the dehydration and thermal decomposition as well as data of kinetic parameters have been described here. The kinetic behaviors of these stages were evaluated from several heating rates with samples masses of 2 and 5 mg in open crucibles under a nitrogen atmosphere. The results of the present study improve the knowledge on these compounds including their dehydration and thermal stability. The obtained data depend on the mass of the sample which results in two kinetic behavior patterns.     

Thermal reduction of Pd molecular cluster precursors at highly ordered pyrolytic graphite surfaces

Highly ordered pyrolytic graphite (HOPG) surfaces were modified by the adsorption of Pd molecular precursors from solution. Two palladium-containing molecular precursors were studied, a mononuclear one and a trinuclear one, to compare their affinities and distributions at substrate surfaces. To obtain Pd nanoparticles, these neutral molecular precursors were reduced under a hydrogen atmosphere. Thermogravimetric analysis was carried out to establish the behavior of these precursors at various temperatures. Understanding the thermal stability of these compounds is very important to establish the appropriate conditions to form metallic Pd. The modified surface has been characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy; also, the reductive process was monitored by XPS. Remarkable differences were observed between the mononuclear and trinuclear compounds in terms of dispersion, particle size, and homogeneity. The preference of the trinuclear compound was to deposit at HOPG defects, in contrast to that of the mononuclear one, which was agglomeration on all surfaces. After the application of this technique, not only Pd nanoparticles but also Pd nanowires were obtained.     

High-temperature transformations of Cu-rich hydrotalcites

CuM(II)Al ternary hydrotalcites (M(II) = Ni, Co and Mg) with a (Cu+M(II))/Al atomic ratio of 3.0 and Cu/M(II) atomic ratio of 5.0 were synthesized by coprecipitation under low supersaturation. Powder X-ray diffraction of the as-synthesized samples showed a pattern characteristic of hydrotalcite-like (HT-like) structure (JCPDS: 41-1428). Thermal analyses of these samples showed four stages of weight loss/heat change when recorded in nitrogen. Analysis of the evolved gases characterized the nature of these transformations. The thermoanalytical effects differed significantly especially for the high-temperature transformations, when the treatment was performed in oxygen. In situ powder X-ray diffraction of the samples was carried out to elucidate the phase evolution of these compounds. Surprisingly formation of CuO was noted at temperatures around 200°C well below the destruction of the layered network. The nature of the resulting phases varied with both the nature of the co-bivalent metal ion and the heating atmosphere. FT-IR spectroscopy confirmed the retention of carbonate ions at higher temperatures (above 700°C), although the concentration of carbonate anion (most likely unidentate) varied with the calcination temperature. The crystallinity of CuO increased significantly above 600°C, probably through dissociation of copper oxycarbonate. Significant differences in the thermal transformation temperatures (for the third and the fourth transformations) of these samples containing different co-bivalent metal ions were not observed. This suggests that an association of the co-bivalent metal ions and/or trivalent metal ion in this phase is unlikely. A plausible thermal evolution scheme of these hydrotalcites is proposed.     

Some Properties and Thermal Decomposition of Yttrium and Lanthanide Benzohydroxamates

The conditions of formation and some properties of yttrium and lanthanide benzohydroxamates were studied. Simultaneous TG-DTG-DTA studies under non-isothermal conditions were carried out in air atmosphere in the temperature range 20-1000°C. The IR spectra and X-ray patterns of some thermal decomposition products were recorded. This revised version was published online in July 2006 with corrections to the Cover Date.     

The influence of chemical structure of sulfonamides on the course of their thermal decomposition

The thermal decomposition of several sulfonamides and potassium salts of sulfonamides was investigated. The analyses were performed using a derivatograph in an air atmosphere, sample sizes were from 50 to 200 mg and heating rate from 2.5 to 20 K min^-1. It has been established, that the thermal destruction of studied compounds occurs via three stages with formation of potassium carbonate as a final product of the complete combustion of potassium salts of sulfonamides. The temperature ranges, in which the analyzed compounds undergo thermal transformations were established. For evaluation of the results the principal component analysis (PCA) was applied. By this method the influence of the specific functional groups on the thermal decomposition of sulfonamides and potassium salts of sulfonamides was determined. It has also been recognized, that better discrimination among the analyzed compounds is obtained for the data set of the DTA. This revised version was published online in July 2006 with corrections to the Cover Date.     

Hepta isobutyl polyhedral oligomeric silsesquioxanes (hib-POSS)

Six polyhedral oligomeric silsesquioxanes (POSSs) with general formula R₇ R′₁ (SiO_1.5)₈, where R- was an isobutyl group and R′- a variously substituted phenyl group, namely hepta isobutyl polyhedral oligomeric silsesquioxane (hib-POSS), were prepared and their composition was checked by elemental analysis and ¹ H NMR spectroscopy. The degradation of compounds obtained was studied by simultaneous differential thermal analysis/thermogravimetry (DTA/TG) technique, in both inert (flowing nitrogen) and oxidative (static air atmosphere) environments, in order to draw useful information about their thermal stability. Experiments, performed in the 35–700 °C temperature range, showed different behaviour between the two used atmospheres. The formation of volatile compounds only, with an about complete mass loss, was observed under nitrogen, while a solid residue (≈40–50% in every case), due to the formation of SiO₂, as indicated by the FTIR spectra, was obtained in static air atmosphere. The results obtained were discussed and compared, and the classifications of resistance to thermal degradation in the studied environments were made. A comparison between the thermal stabilities of hib-POSSs and analogous cyclopentyl POSSs previously studied was also performed.     

New thermally stable condensation polymers containing central ketal moieties derived from malonaldehydetetramethyl acetal and dihydroxyaromatic compounds

Abstract

A number of new condensation polymers with acetal units in the main chain and having linear and ladder-form structure and high thermal stability were synthesized by solution polycondensation of dihydroxyaromatic compounds with malonaldehydetetramethyl acetal as a reactive protected 1,3-dicarbonyl compound. Optimal conditions for polycondensation were obtained via study of the model compounds. In order to obtain high molecular weight polymers, general investigations on the influence of reaction conditions, such as monomer concentration and reaction temperature were carried out. All polymers were obtained in high yields and moderate inherent viscosity ranging from 0.25 to 0.41?dL/g. The proposed chemical structures of condensation polymers were confirmed by ¹H-NMR, ¹³C-NMR, FTIR spectroscopies, TGA, and DSC. Thermal analysis indicated that these polymers are stable up to 360?°C, and a 10% weight loss (T₁₀) were recorded on the TG curves in the temperature range of 381–411?°C in nitrogen atmosphere, indicating their good thermal stability.     

Thermoanalytical study of activated carbon regeneration. III. o-, m-, p- nitroaniline desorption

The thermal behaviour of granular activated carbon loaded with o-, m- and p-nitroaniline up to 950°C in a N₂ atmosphere is described. Partial release is obtained for all compounds under these conditions, with about 90% of the desorption occurring before 500°C with a complex, exothermic pattern. Energies associated with DTA effects are evaluated.     

Synthesis and Photochemistry of Novel 3,5-Diacetyl-1,4-dihydropyridines

 Some novel 3,5-diacetyl-1,4-dihydropyridine derivatives were synthesized; their photochemical behaviour was studied under oxygen or argon atmosphere. Irradiation of these compounds resulted in the aromatization of the ring and formation of 3,5-diacetylpyridine derivatives. The presence of oxygen plays an important role in the type, rate, or failure of oxidation. Irradiation of these compounds with of 2-furyl or 5-methyl-2-furyl substituents in position 4 under argon resulted in the formation of a pyridine ring with retention of these substituents, whereas loss of these substituents and ring aromatization was observed upon irradiation under oxygen.