Electrooptic constants of some norbornene derivatives and anisotropy in the polarizability of the C=C bond

Measurements have been made of the Kerr constants and dipole moments at infinite dilution in CCl₄ for endo-5-cyanonorbornene, exo-5-cyanonorbornene, 5-chloronorbornene, and 5-bromonorbornene. These quantities are used with the molar Kerr constant, degree of depolarization of the scattered light, and the dipole moment of cyclohexene to calculate the axes of the polarizability ellipsoid for the C=C bond: b_L (along the bond), b_T (in plane of bond), and b_V (perpendicular to that plane).We are indebted to Academician B. A. Arbuzov for interest in the work.     

Quantum-Chemical Study of the Structure of Cyanophosphines and Their Oxides

The structure of cyanophosphines and their oxides was studied by ab initio (RHF/6-31G^**) and semiempirical (PM3) methods. Both methods predict that MeOP(CN)₂, (MeO)₂PCN, and (MeO)₂P(O)CN exist in noneclipsed antiperiplanar and synclinal conformations. The calculation results nicely agree with measured dipole moments and Kerr constants of these compounds. The phenyl and diphenyl derivatives PhP(CN)₂, Ph₂PCN, Ph(Et)PCN, and Ph₂P(O)CN prefer forms in which the phenyl ring plane is eclipsing the phosphorus lone electron pair or the phosphoryl bond. The interactions of the phosphorus lone electron pair with the phenyl ring and with the cyano group are lacking in the title compounds.     

Structural effects on the rates of the ion molecule reactions of organic heterocycles

Rate constants for proton transfer reactions of seven heterocyclic amines, eight heterocyclic ethers and propylene sulfide have been measured by photoionization mass specrometry. Rate constants for dimerization of four sulfides have also been measured. The measured rate constants have also been compared to the theoretical (ADO) rate constants. In all cases the ADO rate constants show only small variations with structure. In fact for the mono-heterocycles all but one of the ADO rate constants are between 2.0 and 1.5 × 10^?9 cc molec^?1 sec^?1. The observed rate constants show considerable dependence on chemical structure. The amines react faster than the oxides which in turn react faster than the sulfides. N-Methyl substitution on pyrrolidine and piperidine lowers their rate constants by about a factor of two while, propylene oxide reacts eighteen percent faster than ethylene oxide. Examination of the variation in the observed rate constants as a function of ring size for each group of heterocycles indicates a distinct structure-reactivity correlation although we have not attempted to rationalize this correlation. There is also a structure-reactivity dependence observed in the six-membered oxygen heterocycles having a second heteroatom O, NH, or S in the 4-position. The rate constants increase with the electronegativity of the second heteroatom.     

Stationary Kinetics of Light Olefin Oxidation by Hydrogen Peroxide in Aqueous Alkali Solutions in the Presence of Fe(III) Oxide

The steady-state kinetics of ethylene and propylene oxidation by hydrogen peroxide in the presence of Fe(III) oxide in aqueous solutions with the permanent adding of H₂O₂ to the reaction medium was studied. The use of an original method for the study of the steady-state reaction kinetics with gas chromatographic detection of substrate consumption from the gas phase made it possible to estimate the apparent rate constants of ethylene oxidation, the ratio of the rate constants of propylene and ethylene oxidation, the reaction orders with respect to the substrate and oxidant concentration, the dependence of the apparent rate constant of ethylene oxidation on the catalyst weight and on the pH of solution, and the apparent activation energy of the process under condition of substrate distribution between the gas and liquid phases. It was found that the kinetic isotope effect in ethylene oxidation is almost absent when completely deuterated ethylene is used.     

Electrical and Optical Properties of the Nitramine Group and Molecular Structure of Some N-Nitramines

The electrical and optical properties (dipole moment, electrooptical and optical Kerr constants, molecular polarizability anisotropy, polarizability tensor, molecular refraction) of N,N-dimethylnitramine as the simplest N-NO₂ derivative were studied by a set of experimental and theoretical methods with the aim to determine the components of the polarizability ellipsoid of the N-NO₂ group and develop a valence-optical scheme for calculating the optical and electrooptical parameters of N-NO₂ compounds. Conjugation of the p electrons of the imide nitrogen atom with the electrons of the nitro group results in deviation of the properties of N,N-dimethylnitramine from the additive values. Comparative evaluation of the parameters of the Csp³-NO₂, Csp²-NO₂, and N-NO₂ groups was made.     

Course of the terpolymerization of ethylene,propylene, and dicyclopentadiene. II. Two-step addition of dicyclopentadiene

Terpolymerizations of ethylene, propylene, and dicyclopentadiene were carried out in which the dicyclopentadiene was added to the reaction system in two equal portions at the beginning and midpoint of each run, while the monoolefins were added continuously. In the resultant elastomers, unsaturation remains much more constant throughout the course of the polymerization than for terpolymers obtained when all dicyclopentadiene is added at the start of the reaction. Yield and molecular weight of the terpolymers produced by either technique are quite comparable, however. With VCl₄ catalyst (with Al₂Et₃Cl₃ cocatalyst) in heptane solvent, the two-step addition of the diene gave terpolymers with little gel, in contrast to the high gel in terpolymers formed with the single initial addition of the diene. This system also produced terpolymer with the highest final unsaturation and molecular weight. Catalysts of VCl₄, VOCl₃, or V(C₅H₇O₂)₃ in benzene gave terpolymers of moderate unsaturations and molecular weights.     

Homopolymerization of propylene oxide and copolymerization of propylene oxide and carbon dioxide with metal salts of acetic acid

The homopolymerization of propylene oxide was first conducted at 80°C in the absence of any solvent by using various metal salts of acetic acid and it was found that Mg(OAc)₂, Cr(OAc)₃, Mn(OAc)₂, Co(OAc)₂, Ni(OAc)₂, Zn(OAc)₂, and Sn(OAc)₂ were effective for the polymerization. The copolymerization of propylene oxide and carbon dioxide was next examined by using these effective metal salts of acetic acid as catalysts. Most of these were effective also for the copolymerization. The nature of the polymer obtained was strongly dependent on the catalyst used. Co(OAc)₂ and Zn(OAc)₂ gave an alternate copolymer of propylene oxide and carbon dioxide, Mg(OAc)₂, Cr(OAc)₃, and Ni(OAc)₂ gave a random copolymer, while Sn(OAc)₂ gave a homopolymer of propylene oxide. Then the copolymerization of propylene oxide and carbon dioxide was kinetically investigated in some detail by using Co(OAc)₂ as a catalyst. On the basis of the results obtained, a plausible mechanism was proposed for both the homopolymerization of propylene oxide and copolymerization of propylene oxide and carbon dioxide.     

Classification of Simple Oxides: A Polarizability Approach

A simple oxide classification has been proposed on the basis of correlation between electronic polarizabilities of the ions and their binding energies determined by XPS. Three groups of oxides have been considered taking into account the values obtained on refractive-index- or energy-gap-based oxide ion polarizability, cation polarizability, optical basicity, O 1s binding energy, metal (or nonmetal) binding energy, and Yamashita-Kurosawa's interaction parameter of the oxides. The group of semicovalent predominantly acidic oxides includes BeO, B₂O₃, P₂O₅, SiO₂, Al₂O₃, GeO₂, and Ga₂O₃ with low oxide ion polarizability, high O 1s binding energy, low cation polarizability, high metal (or nonmetal) outermost binding energy, comparatively low optical basicity, and strong interionic interaction, leading to the formation of strong covalent bonds. Some main group oxides so-called ionic or basic such as CaO, In₂O₃, SnO₂, and TeO₂ and most transition metal oxides show relatively high oxide ion polarizability, O 1s binding energy in a very narrow medium range, high cation polarizability, and low metal (or nonmetal) binding energy. Their optical basicity varies in a narrow range and it is close to that of CaO. The group of very ionic or very basic oxides includes CdO, SrO, and BaO as well as PbO, Sb₂O₃, and Bi₂O₃, which possess very high oxide ion polarizability, low O 1s binding energy, very high cation polarizability, and very low metal (or nonmetal) binding energy. Their optical basicity is higher than that of CaO and the interionic interaction is very weak, giving rise to the formation of very ionic chemical bonds.     

Differences in Reactivity of Epoxides in the Copolymerisation with Carbon Dioxide by Zinc-Based Catalysts: Propylene Oxide versus Cyclohexene Oxide

The homogeneous dinuclear zinc catalyst going back to the work of Williams et al. is to date the most active catalyst for the copolymerisation of cyclohexene oxide and CO₂ at one atmosphere of carbon dioxide. However, this catalyst shows no copolymer formation in the copolymerisation reaction of propylene oxide and carbon dioxide, instead only cyclic carbonate is found. This behaviour is known for many zinc‐based catalysts, although the reasons are still unidentified. Within our studies, we focus on the parameters that are responsible for this typical behaviour. A deactivation of the catalyst due to a reaction with propylene oxide turns out to be negligible. Furthermore, the catalyst still shows poly(cyclohexene carbonate) formation in the presence of cyclic propylene carbonate, but the catalyst activity is dramatically reduced. In terpolymerisation reactions of CO₂ with different ratios of cyclohexene oxide to propylene oxide, no incorporation of propylene oxide can be detected, which can only be explained by a very fast back‐biting reaction. Kinetic investigations indicate a complex reaction network, which can be manifested by theoretical investigations. DFT calculations show that the ring strains of both epoxides are comparable and the kinetic barriers for the chain propagation even favour the poly(propylene carbonate) over the poly(cyclohexene carbonate) formation. Therefore, the crucial step in the copolymerisation of propylene oxide and carbon dioxide is the back‐biting reaction in the case of the studied zinc catalyst. The depolymerisation is several orders of magnitude faster for poly(propylene carbonate) than for poly(cyclohexene carbonate).     

On the electrical polarization of polymer single crystals in suspension

A model is proposed for the electrical polarization that causes the orientation and, hence, the electric birefringence of a suspension containing single crystals of a poly(ethylene oxide)–polystyrene diblock copolymer or a poly(ethylene oxide) homopolymer. It serves to describe how an electric dipole moment lying in the plane of the single crystal can be induced by protons migrating in poly-(ethylene oxide). The resulting Kerr effect is calculated up to saturating fields, and the observed dispersion of the polarization in high frequency fields is explained as a space charge relaxation phenomenon. The estimated relaxation time agrees satisfactorily with published experimental data.     

Polarizability and Kerr constant of proteins by boundary element methods

A precise implementation of the boundary element method has been applied to the computation of the polarizability and the Kerr constant of eight soluble proteins. The method is demonstrated to be accurate and precise by comparison with analytical values for spheroids. Two different integral equations have been solved: (1) an exact equation with explicit dielectric constant dependence, and (2) an exact equation for a metallic body. The dielectric dependence for the metallic body case is built in with a generalization of the ellipsoid formula. Both methods agree quantitatively with each other for low relative dielectric constants. A full tensor expression for the Kerr constant yields perfect agreement with experiment for some proteins and badly under reports for the rest. The protein structure is obtained from a crystallographic database and is assumed rigid throughout the TEB measurement. Electrolyte effects are neglected. The Kerr constant is dominated by the protein dipole moment and is quite sensitive to the orientation of the dipole moment relative to the principal axes of the polarizability tensor. Several possible reasons for the large discrepancy between some computed and measured values are discussed.     

Melting behavior of ethylene oxide–propylene oxide (sym-PEP) block copolymers

Melting points and lamellar thicknesses have been measured for ethylene oxide–propylene oxide block copolymers (sym-PEP) with central poly(ethylene oxide) block lengths of 70–100 chain units and end poly(propylene oxide) block lengths of 0–30 chain units. Melting points of the block copolymers are lower than those of the corresponding poly(ethylene oxide) homopolymer by an amount (up to 15°C) which increases as the poly(propylene oxide) block length increases. Most samples have more than one melting transition, which can be assigned to variously folded chain crystals. End interfacial free energies σ_e for the various crystals have been estimated by use of Flory's theory of melting of block copolymers. For a given crystal type (e.g., once-folded-chain) σ_e is higher the longer the chain length of the end poly(propylene oxide) blocks. For a given copolymer σ_e is lower, the more highly folded the poly(ethylene oxide) chain.     

Synthesis and aqueous solution properties of functionalized and thermoresponsive poly(D,L-lactide)/polyether block copolymers

Tri- and pentablock amphiphilic copolymers containing hydrophobic poly(D,L-lactide) block(s) and hydrophilic polyethers were synthesized in order to obtain new precursor architectures suitable for drug delivery systems. Polyglycidol-6-poly(ethylene oxide)-b-poly(D,L-lactide) possess high hydroxyl functionality provided by the linear polyglycidol block. Thus very stable hydroxyl functionalized micelles in aqueous media were obtained. On the other hand poly(D,L-lactide)-b-poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide)-b-poly(D,L-lactide) form temperature sensitive aggregates. The copolymers obtained were analyzed by SEC and NMR, and their aqueous solution properties were followed by cloud point measurements and determination of critical micellization temperature. TEM was used for particles visualization.     

13C NMR spectra of benzo[b]thiophene and 1-(X-benzo[b]thienyl)ethyl acetate derivatives

Carbon-13 chemical shift assignments are reported for benzo[b]thiophene and 1-(X-benzo[b]thienyl)ethyl acetate derivatives, where X=? CH(OAc)CH₃ substituted at positions 2-7. Substituent chemical shift (SCS) effects for the ethyl acetate group are additive at all positions. A substantial upfield shift was observed at C-3, arising from the peri interaction of H-3 and the 4-ethyl acetate substituent. Carbon-13 relaxation times (T₁) and nuclear Overhauser enhancements (η) have been measured for benzo[b]thiophene and its derivatives, and the contributions of dipolar, T^DD₁, and spin rotation, T^SR₁, relaxation have been determined. Intramolecular dipole–dipole interactions are found to provide by far the most important spin-lattice relaxation mechanism whenever protons are bound directly to the carbons under investigation. Nonprotonated ring carbons are relaxed by both DD and SR mechanisms. Anisotropic motion has an easily observable effect on the DD contribution to T₁, and can form the basis for spectral assignments, as in 1-phenylethyl acetate. Long-range ¹³C? ¹H coupling constants were observed both between ring carbons and between ring carbons with ring side-chain hydrogens. These results have been used for the structure determination of the title compounds.     

Preparation and stabilization of silver nanoparticles by a thermo-responsive pentablock terpolymer

Thermo-reversible silver nanoparticles (Ag-NPs) were prepared by the sodium borohydride reduction of silver nitrate (AgNO₃) in the presence of a pentablock terpolymer, poly(N-isopropylacrylamide)-b-poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide)-b-poly(N-isopropylacrylamide) (PNIPAM₁₅₀-PEO₁₃₆-PPO₄₅-PEO₁₃₆-PNIPAM₁₅₀). The pentablock terpolymer-stabilized silver nanoparticles (Pentablock-S-Ag) were characterized by UV-VIS spectroscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA) and transmission electron microscopy (TEM). At temperatures below lower critical solution temperature (LCST) of Pentablock-S-Ag solutions, the obtained Ag-NPs are well-dispersed with spherical shape, and their sizes mainly depend upon the molar ratios of pentablock terpolymer to AgNO₃; at temperatures above LCST, the size of Ag-NPs decreases and their aggregates are observed due to the collapse and shrinkage of the thermo-responsive PNIPAM and PPO segments. A reversible dispersion-aggregation process upon recyclically changing temperature is also observed.     

Flash photolysis study of the reactivity of isomeric forms of arylnitroso oxides toward triphenyl phosphite

The kinetics of the reactions of phenylnitroso oxide and 4-CH₃O-, 4-CH₃-, and 4-Br-phenylnitroso oxides with triphenyl phosphite was studied in acetonitrile, benzene, and hexane by flash photolysis. The reaction occurs only with the trans-isomers of nitroso oxides. The value of the reaction rate constant increases with an increase in the electron-withdrawing power of substituents on the nitroso oxide aromatic ring, with the rate constant being almost the same in benzene and acetonitrile, and increasing by a factor of 2–3 in hexane. The temperature dependence for the decay rate constants of isomeric nitroso oxides in the presence of triphenyl phosphite was studied in acetonitrile.     

Spatial structures of substituted oxiranes

Conclusions On the basis of the measurements of dipole moments and Kerr constants it can be said that the oxides of the thiophene chalcone analogues exist in s-cis and s-trans conformations, these differing in the mutual orientation of oxirane ring and carbonyl group.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1514–1518, July, 1976.The authors wish to thank V. I. Savin for having supplied the thienyl cyclopropyl ketone(IX).     

Discovering the Elusive Global Minimum in a Ternary Chiral Cluster: Rotational Spectra of Propylene Oxide Trimer

The chirality controlled conformational landscape of the trimer of propylene oxide (PO), a prototypical chiral molecule, was investigated using rotational spectroscopy and a range of theoretical tools for conformational searches and for evaluating vibrational contributions to effective structures. Two sets of homochiral (PO)₃ rotational transitions were assigned and the associated conformers identified with theoretical support. One set of heterochiral (PO)₃ transitions was assigned, but no structures generated by one of the latest, advanced conformational search codes could account for them. With the aid of a Python program, the carbon atom backbone and then the heterochiral (PO)₃ structure were generated using ¹³C isotopic data. Excellent agreement between theoretical and experimental rotational constants and relative dipole moment components of all three conformers was achieved, especially after applying vibrational corrections to the rotational constants.     

Control of structure and particle size of iron oxide on carrier oxide by the sol-gel method using organic polydentate ligands

It was tried to control the structure and particle size of iron oxide supported on a carrier by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands. The iron oxide/carrier composites were prepared by calcining carrier oxides impregnated with organic ligands and Fe(NO₃)₃·9H₂O. When ligands were diacetone alcohol and ethanol, the structure of the iron oxide was exclusively corundum. But, with ligands such as ethylene glycol, citric acid and galacturonic acid, the structure of the iron oxide changed from corundum to spinel as the amount of ligands used increased. With both series of ring and straight chain saccharides, size of the iron oxide particles changed depending on saccharides used. It was thus concluded that the structure and particle size of iron oxide supported on a carrier can be regulated by using organic polydentate ligands.     

Configurational properties of aromatic polyesters: Dipole moments of poly(diethylene terephthalate) chains

Dielectric constants have been determined for a fraction of poly(diethylene terephthalate) in benzene at several temperatures. The data indicate that the dipole moment ratio 〈μ²〉/Nm² is somewhat higher than that of poly(ethylene oxide), and its temperature coefficient is in the vicinity of zero. Both the dipole ratio and its temperature coefficient are in very good agreement with those predicted by the rotational isomeric state theory. Using this theory, the unperturbed dimensions of poly(diethylene terephthalate) were calculated and it was found that (〈r²〉/M)_∞ = 0.80 Ų (g mol wt)^?1, a value intermediate between those of poly(ethylene oxide) (0.57) and poly(ethylene terephthalate) (1.05).