A probable hydrogen-bonded Meisenheimer complex: an unusually high S(N)Ar reactivity of nitroaniline derivatives with hydroxide ion in aqueous media

Observations show that nitroanilines exhibit an unusually high S(N)Ar reactivity with OH(-) in aqueous media in reactions that produce nitrophenols. S(N)Ar reaction of 4-nitroaniline (2a) in aqueous NaOH for 16 h yields 4-nitrophenol (4a) quantitatively, whereas a similar reaction of 4-nitrochlorobenzene (1a) gave 4a in 2% yield together with recovered 1a in 97%, suggesting that the leaving ability of the NH(2) group far surpasses that of Cl under these conditions. An essential feature of S(N)Ar reactions of nitroanilines is probably that the NH(2) leaving group participates in a hydrogen-bonding interaction with H(2)O. Density functional theory (DFT) calculations for a set of 4-nitroaniline, OH(-), and H(2)O suggest a possible formation of a Meisenheimer complex stabilized by hydrogen-bonding interactions and a six-membered ring structure. The results obtained here contrast with conventional S(N)Ar reactivity profiles in which nitroanilines are nearly unreactive with nucleophiles in organic solvents.     

Kinetics of radical heterolysis reactions forming alkene radical cations

Rate constants for heterolytic fragmentation of beta-(ester)alkyl radicals were determined by a combination of direct laser flash photolysis studies and indirect kinetic studies. The 1,1-dimethyl-2-mesyloxyhexyl radical (4a) fragments in acetonitrile at ambient temperature with a rate constant of k(het) > 5 x 10(9) s(-1) to give the radical cation from 2-methyl-2-heptene (6), which reacts with acetonitrile with a pseudo-first-order rate constant of k = 1 x 10(6) s(-1) and is trapped by methanol in acetonitrile in a reversible reaction. The 1,1-dimethyl-2-(diphenylphosphatoxy)hexyl radical (4b) heterolyzes in acetonitrile to give radical cation 6 in an ion pair with a rate constant of k(het) = 4 x 10(6) s(-1), and the ion pair collapses with a rate constant of k < or = 1 x 10(9) s(-1). Rate constants for heterolysis of the 1,1-dimethyl-2-(2,2-diphenylcyclopropyl)-2-(diphenylphosphatoxy)ethyl radical (5a) and the 1,1-dimethyl-2-(2,2-diphenylcyclopropyl)-2-(trifluoroacetoxy)ethyl radical (5b) were measured in various solvents, and an Arrhenius function for reaction of 5a in THF was determined (log k = 11.16-5.39/2.3RT in kcal/mol). The cyclopropyl reporter group imparts a 35-fold acceleration in the rate of heterolysis of 5a in comparison to 4b. The combined results were used to generate a predictive scale for heterolysis reactions of alkyl radicals containing beta-mesyloxy, beta-diphenylphosphatoxy, and beta-trifluoroacetoxy groups as a function of solvent polarity as determined on the E(T)(30) solvent polarity scale.     

Redox chemistry of tellurium bis(tert-butylamido)cyclodiphosph(V)azane disulfide and diselenide systems: a spectroscopic and structural study

The redox chemistry of tellurium-chalcogenide systems is examined via reactions of tellurium(IV) tetrachloride with Li[(t)()BuN(E)P(mu-N(t)Bu)(2)P(E)N(H)(t)Bu] (3a, E = S; 3b, E = Se). Reaction of TeCl(4) with 2 equiv of 3a in THF generates the tellurium(IV) species TeCl(3)[HcddS(2)][H(2)cddS(2)] 4a [cddS(2) = (t)BuN(S)P(mu-N(t)Bu)(2)P(S)N(t)Bu] at short reaction times, while reduction to the tellurium(II) complex TeCl(2)[H(2)cddS(2)](2) 5a is observed at longer reaction times. The analogous reaction of TeCl(4) and 3b yields only the tellurium(II) complex TeCl(2)[H(2)cddSe(2)](2) 5b. The use of 4 equiv of 3a or 3b produces Te[HcddE(2)](2) (6a (E = S) or 6b (E = Se)). NMR and EPR studies of the 5:1 reaction of 3a and TeCl(4) in THF or C(6)D(6) indicate that the formation of the Te(II) complex 6a via decomposition of a Te(IV) precursor occurs via a radical process to generate H(2)cddS(2). Abstraction of hydrogen from THF solvent is proposed to account for the formation of 2a. These results are discussed in the context of known tellurium-sulfur and tellurium-nitrogen redox systems. The X-ray crystal structures of 4a.[C(7)H(8)](0.5), 5a, 5b, 6a.[C(6)H(14)](0.5), and 6b.[C(6)H(14)](0.5) have been determined. The cyclodiphosph(V)azane dichalcogenide ligand chelates the tellurium center in an E,N (E = S, Se) manner in 4a.[C(7)H(8)](0.5), 6a.[C(6)H(14)](0.5), and 6b.[C(6)H(14)](0.5) with long Te-N bond distances in each case. Further, a neutral H(2)cddS(2) ligand weakly coordinates the tellurium center in 4a small middle dot[C(7)H(8)](0.5) via a single chalcogen atom. A similar monodentate interaction of two neutral ligands with a TeCl(2) unit is observed in the case of 5a and 5b, giving a trans square planar arrangement at tellurium.     

Guest-induced assembly of tetracarboxyl-cavitand and tetra(3-pyridyl)-cavitand into a heterodimeric capsule via hydrogen bonds and CH-halogen and/or CH-pi interaction: control of the orientation of the encapsulated guest

The guest- or solvent-induced assembly of a tetracarboxyl-cavitand 1 and a tetra(3-pyridyl)-cavitand 2 into a heterodimeric capsule 1.2 in a rim-to-rim fashion via four intermolecular CO(2)H.N hydrogen bonds has been investigated both in solution and in the solid state. In the (1)H NMR study, a 1:1 mixture of1a and 2a (R = (CH(2))(6)CH(3)) in CDCl(3) gave a mixture of various complicated aggregates, whereas this mixture in CDCl(2)CDCl(2) or p-xylene-d(10) exclusively produced the heterodimeric capsule 1a.2a. It was found that an appropriate 1,4-disubstituted-benzene is a suitable guest for inducing the exclusive formation of 1a.2a in CDCl(3). The ability of a guest to induce the formation of guest-encapsulating heterodimeric capsule, guest@(1a.2a), increased in the order p-ethyltoluene < 1-ethyl-4-methoxybenzene < or = 1-ethyl-4-iodobenzene < or = 1,4-dibromobenzene < 1-iodo-4-methoxybenzene < or= 1,4-dimethoxybenzene < or = 1,4-diiodobenzene. The (1)H NMR study revealed that a CH-halogen interaction between the inner protons of the methylene-bridge rims (-O-H(out)CH(in)-O-) of the 1a and 2a units and the halogen atoms of 1,4-dihalobenzenes and a CH-pi interaction between the methoxy protons of 1,4-dimethoxybenzene and the aromatic cavities of the 1a and 2a units play important roles in the formation of 1,4-dihalobenzene@(1a.2a) and 1,4-dimethoxybenzene@(1a.2a), respectively. A preliminary single-crystal X-ray diffraction analysis of guest@(1b.2b) (R = (CH(2))(2)Ph; guest = 1-iodo-4-methoxybenzene or p-xylene) confirmed that the guest encapsulated in 1b.2b is oriented with the long axis of the guest along the long axis of 1b.2b and that the iodo and the methoxy groups of the encapsulated 1-iodo-4-methoxybenzene are specifically oriented with respect to the cavities of the 2b and 1b units, respectively.     

Transfer of amido groups from isolated rhodium(I) amides to alkenes and vinylarenes

The reaction of monomeric and dimeric rhodium(I) amido complexes with unactivated olefins to generate imines is reported. Transamination of {(PEt(3))(2)RhN(SiMePh(2))(2)} (1a) or its -N(SiMe(3))(2) analogue 1b with p-toluidine gave the dimeric [(PEt(3))(2)Rh(mu-NHAr)](2) (Ar = p-tolyl) (2a) in 80% isolated yield. Reaction of 2a with PEt(3) generated the monomeric (PEt(3))(3)Rh(NHAr) (Ar = p-tolyl) (3a). PEt(3)-ligated arylamides 2a and 3a reacted with styrene to transfer the amido group to the olefin and to form the ketimine Ph(Me)C=N(p-tol) (4a) in 48-95% yields. The dinuclear amido hydride (PEt(3))(4)Rh(2)(mu-NHAr)(mu-H) (Ar = p-tolyl) (5a) was formed from reaction of 2a in 95% yield, and a mixture of this dimeric species and the (PEt(3))(n)RhH complexes with n = 3 and 4 was formed from reaction of 3a in a combined 75% yield. Propene reacted with 2a to give Me(2)C=N(p-tol) (4b) and 5a in 90 and 57% yields. Propene also reacted with 3a to give 4b and 5a in 65 and 94% yields. Analogues of 2a and 3a with varied electronic properties also reacted with styrene to form the corresponding imines, and moderately faster rates were observed for reactions of electron-rich arylamides. Kinetic studies of the reaction of 3a with styrene were most consistent with formation of the imine by migratory insertion of olefin into the rhodium-amide bond to generate an aminoalkyl intermediate that undergoes beta-hydrogen elimination to generate a rhodium hydride and an enamine that tautomerizes to the imine.     

Acid-base equilibria in gamma-butyrolactone studied by use of pH-ISFETs

pH-ISFETs were used in the study of acid-base equilibria in gamma-butyrolactone (GBL). After the spectrophotometric determination of the pK(a) value of 3,5-dichloropicric acid, the pK(a) values and homo-conjugation constants of various acids (including the conjugate acids of bases) were determined potentiometrically using a Ta(2)O(5)-type pH-ISFET. The values of pK(a) in GBL were in a linear relation with those in propylene carbonate (PC) and 1.0 units smaller on average. The difference in pK(a) between GBL and PC was mainly attributable to the difference in proton solvation. The autoprotolysis constant of GBL, roughly estimated by a rapid titration with a Si(3)N(4)-ISFET, was about 30 on the pK(SH) scale. A comparative study was made of the response speeds of the Ta(2)O(5)- and Si(3)N(4)-type pH-ISFETs and a conventional pH-glass electrode. The result was Si(3)N(4)-ISFET > Ta(2)O(5)-ISFET > glass electrode. Because GBL is not stable against acids and bases, the use of pH-ISFETs was much more convenient than the use of the conventional glass electrode.     

Synthesis and Structural Studies of Platinum Complexes Containing Monodentate, Bridging, and Chelating Formamidine Ligands

The reactions of K(2)PtCl(4) with N,N'-diphenylformamidine (HDPhF) and N,N'-di-p-tolylformamidine (HDTolF) produce the trans square-planar compounds PtCl(2)(HDPhF)(2), 1a, and PtCl(2)(HDTolF)(2), 1b. Compound 1a crystallizes as yellow parallelepipeds in the space group P2(1)/c with two independent molecules in the asymmetric unit and unit cell dimensions a = 23.427(7) ?, b = 16.677(6) ?, c = 12.980(4) ?, and beta = 96.10(2) degrees. These compounds are soluble in common organic solvents and have been used as starting materials for the preparation of diplatinum compounds. Treatment of 1a and 1b with NaOMe and the halide abstraction reagent TlPF(6) produces the compounds Pt(2)(&mgr;-DArF)(2)(eta(2)-DArF)(2), Ar = Ph (2a) and Tol (2b), respectively. Compound 2a crystallizes as yellow rods in the space group P&onemacr; with unit cell dimensions a = 12.296(3) ?, b = 12.310(4) ?, c = 15.374(4) ?, alpha = 90.75(2) degrees, beta = 91.02(2) degrees, and gamma = 110.20(2) degrees. Compound 2b crystallizes with a molecule of THF, as yellow rods in the space group P2(1)/c with a = 17.883(3) ?, b = 14.517(3) ?, c = 22.581(3) ?, and beta = 98.17(1) degrees. These compounds contain two cis bridging formamidinato ligands and two formamidinato ligands that are chelated to separate Pt centers. Upon heating, they further react to give the tetrabridged compounds Pt(2)(&mgr;-DArF)(4), Ar = Ph (3a), Tol (3b). Compound 3a crystallizes as orange cubes in the cubic space group I432 with a = 19.671(1) ?. On going from the bis-bridged, bis-chelate structure in 2a to the tetrabridged structure in 3a, the metal-metal separation decreases from 2.910(1) to 2.649(1) ?. Both 2band 3b have been oxidized to give the Pt(II)-Pt(III) compound Pt(2)(&mgr;-DTolF)(4)(PF(6)), 4. Compound 4 crystallizes as cubes in the tetragonal space group P4/ncc with a = 14.392(1) ? and c = 14.436(1) ?. The Pt-Pt distance in 4 is 2.5304(6) ?.     

"Spontaneous" ambient temperature dehydrocoupling of aromatic amine-boranes

The dehydrocoupling/dehydrogenation behavior of primary arylamine-borane adducts ArNH(2)?BH(3) (3?a-c; Ar = a: Ph, b: p-MeOC(6)H(4), c: p-CF(3)C(6)H(4)) has been studied in detail both in solution at ambient temperature as well as in the solid state at ambient or elevated temperatures. The presence of a metal catalyst was found to be unnecessary for the release of H(2). From reactions of 3?a,b in concentrated solutions in THF at 22?°C over 24?h cyclotriborazanes (ArNH-BH(2))(3) (7?a,b) were isolated as THF adducts, 7?a,b?THF, or solvent-free 7?a, which could not be obtained via heating of 3?a-c in the melt. The μ-(anilino)diborane [H(2)B(μ-PhNH)(μ-H)BH(2)] (4?a) was observed in the reaction of 3?a with BH(3)?THF and was characterized in situ. The reaction of 3?a with PhNH(2) (2?a) was found to provide a new, convenient method for the preparation of dianilinoborane (PhNH)(2)BH (5?a), which has potential generality. This observation, together with further studies of reactions of 4?a, 5?a, and 7?a,b, provided insight into the mechanism of the catalyst-free ambient temperature dehydrocoupling of 3?a-c in solution. For example, the reaction of 4?a with 5?a yields 6?a and 7?a. It was found that borazines (ArN-BH)(3) (6?a-c) are not simply formed via dehydrogenation of cyclotriborazanes 7?a-c in solution. The transformation of 7?a to 6?a is slowly induced by 5?a and proceeds via regeneration of 3?a. The adducts 3?a-c also underwent rapid dehydrocoupling in the solid state at elevated temperatures and even very slowly at ambient temperature. From aniline-borane derivative 3?c, the linear iminoborane oligomer (p-CF(3)C(6)H(4))N[BH-NH(p-CF(3)C(6)H(4))](2) (11) was obtained. The single-crystal X-ray structures of 3?a-c, 5?a, 7?a, 7?b?THF, and 11 are discussed.     

Chalcogenide-Lewis acid mediated reactions of electron-deficient alkynes with aldehydes

Reactions of but-3-yn-2-one (2) with aldehydes 1 in the presence of a Lewis acid and dimethyl sulfide (3 a) predominantly gave (E)-alpha-(halomethylene)aldols 4-5 in high yields, while reactions of methyl propiolate (6 a) mainly afforded (Z)-3-halogeno-2-(hydroxymethyl)acrylates 7-8 in low to moderate yields. A reaction of dimethyl acetylenedicarboxylate (10) with 1 a in the presence of TiCl(4) and 1,1,3,3-tetramethylthiourea (3 c) produced maleate (E)-11 (40 %) and butenolide 12 (40 %). When a reaction of 6 a with 1 a was carried out in the presence of TiBr(4) and 3 a (0.2 equiv) at -20 degrees C for 60 h, 3-(methylthio)-2-(hydroxyalkyl)acrylate 9 a was obtained in an 8 % yield. Experiments were conducted in order to elucidate the formation mechanism of 9 a, and it was made clear that 9 a was formed via the processes of the Michael addition of sulfide 3 a to alkynoate 6 a and an aldol reaction with 1 a and demethylation.     

FTIR detection of protonation/deprotonation of key carboxyl side chains caused by redox change of the Cu(A)-heme a moiety and ligand dissociation from the heme a3-Cu(B) center of bovine heart cytochrome c oxidase

FTIR spectral changes of bovine cytochrome c oxidase (CcO) upon ligand dissociation from heme a(3)() and redox change of the Cu(A)-heme a moiety (Cu(A)Fe(a)()) were investigated. In a photosteady state under CW laser illumination at 590 nm to carbonmonoxy CcO (CcO-CO), the C-O stretching bands due to Fe(a3)()(2+)CO and Cu(B)(1+)CO were identified at 1963 and 2063 cm(-)(1), respectively, for the fully reduced (FR) state [(Cu(A)Fe(a)())(3+)Fe(a3)()(2+)Cu(B)(1+)] and at 1965 and 2061 cm(-)(1) for the mixed valence (MV) state [(Cu(A)Fe(a)())(5+)Fe(a3)()(2+)Cu(B)(1+)] in H(2)O as well as in D(2)O. For the MV state, however, another band due to Cu(B)(1+)CO was found at 2040 cm(-)(1), which was distinct from the alpha/beta conformers in the spectral behaviors, and therefore was assigned to the (Cu(A)Fe(a)())(4+)Fe(a3)()(3+)Cu(B)(1+)CO generated by back electron transfer. The FR-minus-oxidized difference spectrum in the carboxyl stretching region provided two negative bands at 1749 and 1737 cm(-)(1) in H(2)O, which were apparently merged into a single band with a band center at 1741 cm(-)(1) in D(2)O. Comparison of these spectra with those of bacterial enzymes suggests that the 1749 and 1737 cm(-)(1) bands are due to COOH groups of Glu242 and Asp51, respectively. A similar difference spectrum of the carboxyl stretching region was also obtained between (Cu(A)Fe(a)())(3+)Fe(a3)()(2+)Cu(B)(1+)CO and (Cu(A)Fe(a)())(5+)Fe(a3)()(2+)Cu(B)(1+)CO. The results indicate that an oxidation state of the (Cu(A)Fe(a)()) moiety determines the carboxyl stretching spectra. On the other hand, CO-dissociated minus CO-bound difference spectra in the FR state gave rise to a positive and a negative peaks at 1749 and 1741 cm(-)(1), respectively, in H(2)O, but mainly a negative peak at 1735 cm(-)(1) in D(2)O. It was confirmed that the absence of a positive peak is not caused by slow deuteration of protein. The corresponding difference spectrum in the MV state showed a significantly weaker positive peak at 1749 cm(-)(1) and an intense negative peak at 1741 cm(-)(1) (1737 cm(-)(1) in D(2)O). The spectral difference between the FR and MV states is explained satisfactorily by the spectral change induced by the electron back flow upon CO dissociation as described above. Thus, the changes of carboxyl stretching bands induced both by oxidation of (Cu(A)Fe(a)()) and dissociation of CO appear at similar frequencies ( approximately 1749 cm(-)(1)) but are ascribed to different carboxyl side chains.     

Synthesis,Structure, and Electrochemical Properties of Sterically Protected Molybdenum Trihydride Redox Pairs: A Paramagnetic “Stretched” Dihydrogen Complex?

Complexes [MoCp(#)(PMe(3))(2)H(3)] (Cp(#)=1,2,4-C(5)H(2)tBu(3), 2 a; C(5)HiPr(4), 2 b) have been synthesized from the corresponding compounds [MoCp(#)Cl(4)] (1 a, 1 b) and fully characterized, including by X-ray crystallography and by a neutron diffraction study for 2 a. Protonation of 2 a led to complex [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)H(4)](+) (3 a) in THF and to [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)(MeCN)H(2)](+) (4 a) in MeCN. Complex 4 b analogously derives from protonation of 2 b in MeCN, whereas the tetrahydride complex 3 b is unstable. One-electron oxidation of 2 a and 2 b by [FeCp(2)]PF(6) produces the EPR-active 17-electron complexes 2 a(+) and 2 b(+). The former is thermally more stable than the latter and could be crystallographically characterized as the PF(6) (-) salt by X-ray diffraction, providing evidence for the presence of a stretched dihydrogen ligand (H...H=1.36(6) angstroms). Controlled thermal decomposition of 2 a(+) yielded the product of H(2) elimination, the 15-electron monohydride complex [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)H]PF(6) (5 a), which was characterized by X-ray crystallography and by EPR spectroscopy at liquid He temperature. The compound establishes an equilibrium with the solvent adduct in THF. An electrochemical study by cyclic voltammetry provides further evidence for a rapid H(2) elimination process from the 17-electron complexes. In contrast to the previously investigated [MoCp*(dppe)H(3)](+) system (dppe=1,2-bis(diphenylphosphino)ethane; Cp*=pentamethylcyclopentadienyl), the decomposition of 2 a(+) by H(2) substitution with a solvent molecule appears to follow a dissociative pathway in MeCN.     

Doubly charged protonated a ions derived from small peptides

Protonated a(2) and a(3) (therefore doubly charged) ions in which both charges lie on the peptide backbone are formed in collision-induced dissociations of [La(III)(peptide)(CH(3)CN)(m)](3+) complexes. Abundant (a(3)+H)(2+) ions are formed from triproline (PPP) and peptides with a proline residue at the N-terminus; these peptides are the most effective in producing ions of the type (a(2)+H)(2+) and (a(3)+H)(2+). A systematic study of the effect of the location of the proline residue and other residues of aliphatic amino acids on the generation of protonated a ions is reported. Density functional theory calculations at B3LYP/6-311++G(d,p) gave the proton affinity of the a(3) ion derived from PPP to be 167.6 kcal mol(-1), 2.6 kcal mol(-1) higher than that of water. The protonated a(2) ions of diglycine and diproline and a(3) ions of triglycine have lower proton affinities and are only observed in lower abundances, possibly due to proton transfer to water in ion-molecule reactions.     

Three-step calcination synthesis of high-purity Li8ZrO6 with CO2 absorption properties

Li(8)ZrO(6) contains a high lithium content and may bear a great ability of CO(2) absorption, yet the reports about the properties of CO(2) absorption on Li(8)ZrO(6) are few to date for its difficulty in production. In this paper, high-purity Li(8)ZrO(6) is synthesized via a three-step calcination method combined with an effective lithium source and a suitable initial Li/Zr molar ratio. The produced Li(8)ZrO(6) possesses a great CO(2) absorption capacity of about 53.98 wt % at 998 K, which could be well-maintained in a wide range of CO(2) partial pressures of 0.1-1.0 bar although it decreased gradually during the multicycle process of CO(2) absorption-desorption in a 10% CO(2) feed stream because of the high working temperature. These properties imply that Li(8)ZrO(6) may be a new option for high-temperature CO(2) capture applied in industrial processes such as a steam methane reformer.     

Nucleophilic substitution reactions of aryl dithioacetates with pyridines in acetonitrile

Kinetic studies of the pyridinolysis (XC(5)H(4)N) of aryl dithioacetates (CH(3)C(=S)SC(6)H(4)Z) are carried out in acetonitrile at 60.0 degrees C. A biphasic Br?nsted plot is obtained with a change in slope from a large value (beta(X) congruent with 0.9) to a small value (beta(X) congruent with 0.4) at pK(a) degrees = 5.2, which is attributed to a change in the rate-limiting step from breakdown to formation of a zwitterionic tetrahedral intermediate, T(+/-), in the reaction path as the basicity of the pyridine nucleophile increases. A clear-cut change in the cross-interaction constants rho(XZ) from a large positive value (rho(XZ) = +1.34) to a small negative value (rho(XZ) = -0.15) supports the mechanistic change proposed.     

Synthesis and reactivity of 3-(trichlorogermyl)propanoic acid and 3-(triphenylgermyl) propanoic acid

3-(Trichlorogermyl)propanoic acid (la) reacts with phenylmagnesium bromide in malar ratio 1:4 to give 3-(triphenylgermyl)propanoic acid (2a).In the compounds la and 2a theβ-carboxylic functional group shows some unusual properties when they react with excess of phenylmagnesium bromide.The compound la reacts with phenylmagnesium bromide in molar ratio 1:5 to give phenyl 2-(triphenylgermyl)ethylketone (3a) and in molar ratio 1:6 to give l,l-diphenyl-3-(triphenylgermyl)propanol (4a).The compound 2a reacts with phenylmagnesium bromide in molar ratio 1:2 to give 3a and in molar ratio 1:3 to give 4a also.Dehydration of the compound 4a with dilute hydrochloric acid seems especially easy.Moreover,the compound la reacted with phenylmagnsium bromide in molar ratio 1:6,then the mixture was treated with dilute hydrochloric acid to give 1,1-diphenyl-3-(triphenylgermyl)-1-propene (5a) in one pot reaction.Alkyl Ge-C bond in the compound 5a can be cleaved selectively by lithium aluminium hydride ( LiAlH4) in good yiel     

Models of the low-spin iron(III) hydroperoxide intermediate of heme oxygenase: magnetic resonance evidence for thermodynamic stabilization of the d(xy) electronic state at ambient temperatures

The (13)C pulsed ENDOR and NMR study of [meso-(13)C-TPPFe(OCH(3))(OO(t)Bu)](-) performed in this work shows that although the unpaired electron in low-spin ferrihemes containing a ROO(-) ligand resides in a d(pi) orbital at 8 K, the d(xy) electron configuration is favored at physiological temperatures. The variable temperature NMR spectra indicate a dynamic situation in which a heme with a d(pi) electron configuration and planar porphyrinate ring is in equilibrium with a d(xy) electron configuration that has a ruffled porphyrin ring. Because of the similarity in the EPR spectra of the hydroperoxide complexes of heme oxygenase, cytochrome P450, and the model heme complex reported herein, it is possible that these two electron configurations and ring conformations may also exist in equilibrium in the enzymatic systems. The ruffled porphyrinate ring would aid the attack of the terminal oxygen of the hydroperoxide intermediate of heme oxygenase (HO) on the meso-carbon, and the large spin density at the meso-carbons of a d(xy) electron configuration heme suggests the possibility of a radical mechanism for HO. The dynamic equilibrium between the ruffled (d(xy)) and planar (d(pi)) conformers observed in the model complexes also suggests that a flexible heme binding cavity may be an important structural motif for heme oxygenase activity.     

Cysteamine and its homoleptic complexes with group 12 metal ions. Differences in the coordination chemistry of ZnII, CdII, and HgII with a small N,S-donor ligand

2-Ammoniumethanethiolate, (-)SCH(2)CH(2)NH(3)(+), the first structurally characterized zwitterionic ammoniumthiolate, is the stable form of cysteamine (HL) in the solid state and in aqueous solution. Reactions of ZnCl(2), Cd(Oac)(2), and HgCl(2) with cysteamine and NaOH in a 1:2:2 ratio, respectively, lead to the homoleptic complexes ML(2). Their single-crystal X-ray structures demonstrate basic differences in the coordination chemistry of Zn(II), Cd(II), and Hg(II). While chelating N,S-coordination modes are found for all metal ions, Zn(II) forms a mononuclear complex with a distorted tetrahedral Zn(N(2)S(2)) coordination mode, whereas Hg(II) displays a dimer with Hg(N(2)S(2)) coordinated monomers being connected by two long Hg...S contacts. Solid-state (199)Hg NMR spectra of HgL(2) and [Hg(HL)(2)]Cl(2) reveal a low-field shift of the signals with increasing coordination number. Strong and nearly symmetric Cd-S-Cd bridges in solid CdL(2) lead to a chain structure, Cd(II) displaying a distorted square pyramidal Cd(N(2)S(3)) coordination mode. The ab initio [MP2/LANL2DZ(d,f)] structures of isolated ML(2) show a change from a distorted tetrahedral to bisphenoidal coordination mode in the sequence Zn(II)-Cd(II)-Hg(II). A natural bond orbital analysis showed a high ionic character for the M-S bonds and suggests that the S-M-S fragment is best described by a 3c4e bond. The strength of the M...N interactions and the stability of ML(2) toward decomposition to M and L-L decreases in the sequence Zn > Cd > Hg. Ab initio calculations further suggest that a tetrahedral S-M-S angle stabilizes Zn(II) against substitution by Cd(II) and Hg(II) in a M(N(2)S(2)) environment. Such geometry is provided in zinc-finger proteins, as was found by a database survey.     

Excited-state intramolecular proton transfer molecules bearing o-hydroxy analogues of green fluorescent protein chromophore

o-Hydroxy analogues, 1a-g, of the green fluorescent protein chromophore have been synthesized. Their structures and electronic properties were investigated by X-ray single-crystal analyses, electrochemistry, and luminescence properties. In solid and nonpolar solvents 1a-g exist mainly as Z conformers that possess a seven-membered-ring hydrogen bond and undergo excited-state intramolecular proton transfer (ESIPT) reactions, resulting in a proton-transfer tautomer emission. Fluorescence upconversion dynamics have revealed a coherent type of ESIPT, followed by a fast vibrational/solvent relaxation (<1 ps) to a twisted (regarding exo-C(5)-C(4)-C(3) bonds) conformation, from which a fast population decay of a few to several tens of picoseconds was resolved in cyclohexane. Accordingly, the proton-transfer tautomer emission intensity is moderate (0.08 in 1e) to weak (～10(-4) in 1a) in cyclohexane. The stronger intramolecular hydrogen bonding in 1g suppresses the rotation of the aryl-alkene bond, resulting in a high yield of tautomer emission (Φ(f) ≈ 0.2). In the solid state, due to the inhibition of exo-C(5)-C(4)-C(3) rotation, intense tautomer emission with a quantum yield of 0.1-0.9 was obtained for 1a-g. Depending on the electronic donor or acceptor strength of the substituent in either the HOMO or LUMO site, a broad tuning range of the emission from 560 (1g) to 670 nm (1a) has been achieved.     

Geometry of the Fluorides, Oxofluorides, Hydrides, and Methanides of Vanadium(V), Chromium(VI), and Molybdenum(VI): Understanding the Geometry of Non-VSEPR Molecules in Terms of Core Distortion

This paper describes a study of the topology of the electron density and its Laplacian for the molecules VF(5), VMe(5), VH(5), CrF(6), CrMe(6), CrOF(4), MoOF(4), CrO(2)F(2,) CrO(2)F(4)(2)(-) and CrOF(5)(-) all of which, except VF(5,) CrF(6), and CrOF(5)(-) have a non-VSEPR geometry. It is shown that in each case the interaction of the ligands with the metal atom core causes it to distort to a nonspherical shape. In particular, the Laplacian of the electron density reveals the formation of local concentrations of electron density in the outer shell of the core, which have a definite geometrical arrangement such as four in a tetrahedral arrangement or five in a square pyramidal or trigonal bipyramidal and six in an octahedral arrangement. Ligands that are predominately covalently bonded are found opposite regions of charge depletion between these core charge concentrations. In VH(5), VMe(5), CrOF(4), and MoOF(4), these core charge concentrations have a square pyramidal arrangement, and the regions of charge depletions have the corresponding inverse square pyramidal arrangement so that these molecules have a square pyramidal geometry rather than a trigonal prism geometry. In CrMe(6), there are five core charge concentrations with a trigonal bipyramidal arrangement so that the regions of charge depletion have a trigonal prismatic arrangement and the molecule has the corresponding trigonal prism geometry rather than an octahedral geometry. In contrast, molecules in which the only ligand is the more ionically bound fluorine are less affected by core distortion and have VSEPR-predicted structures. The unexpected bond angles in CrO(2)F(2) and the preference of CrO(2)F(4)(2)(-) for a cis structure are also discussed in terms of the pattern of core charge concentrations.     

Acid-catalysed rearrangements of steroid alkenes-III1. backbone rearrangement of de-a-steroid alkenes and preparation of an aromatic de-a-steroid.

Backbone rearrangement of 10a(methyl)-de-A-cholest-5-ene (3c), 6-ene (3d), 9-ene (3s) and 5(10)-ene (3b) affords products isomeric at C-20 and with the C-10 methyl group in the more stable equatorial position (6a. and 6b). 5-Methylene-10a(methyl)-de-A-cholestane (5) affords similar C-20 isomeric products with both the C-5 and C-10 methyls in the more stable equatorial positions (9a and 9b). The de-A-alkenes (3) provided a convenient starting point for preparation of de-A- cholesta-5,7,9-triene (7). Components (6a, 6b, 7, 9a and 9b) have been used to confirm the widespread occurrence of homologous series of de-A-steroids in marine shales with a mild thermal history.