Conjugated Polymers as Hole Transporting Materials for Solar Cells

In principle, conjugated polymers can work as electron donors and thus as low-cost p-type organic semiconductors to transport holes in photovoltaic devices. With the booming interests in high-efficiency and low-cost solar cells to tackle global climate change and energy shortage, hole transporting materials(HTMs) based on conjugated polymers have received increasing attention in the past decade. In this perspective, recent advances in HTMs for a range of photovoltaic devices including dye-sensitized solar cells(DSSCs), perovskite solar cells(PSCs),and silicon(Si)/organic heterojunction solar cells(HSCs) are summarized and perspectives on their future development are also presented.     

受体型有机光伏材料苝二酰亚胺

苝二酰亚胺作为一种典型的n型材料,具有可见光区强吸收、光和热稳定性较高等突出优点,近年来应用到有机光伏达电池中。本文介绍了苝二酰亚胺及其各种衍生物的结构和性质,综述了其用作有机光伏受体材料（包括小分子型苝二酰亚胺材料、含苝二酰亚胺受体单元的给体-受体双功能分子和含苝二酰亚胺受体单元的给体-受体双缆型聚合物材料）的最新研究进展。     

An Electron Acceptor with Porphyrin and Perylene Bisimides for Efficient Non‐Fullerene Solar Cells

A star‐shaped electron acceptor based on porphyrin as a core and perylene bisimide as end groups was constructed for application in non‐fullerene organic solar cells. The new conjugated molecule exhibits aligned energy levels, good electron mobility, and complementary absorption with a donor polymer. These advantages facilitate a high power conversion efficiency of 7.4 % in non‐fullerene solar cells, which represents the highest photovoltaic performance based on porphyrin derivatives as the acceptor.     

共轭聚合物/C60复合体系及其在光伏打电池中的应用

共轭聚合物/C₆₀复合体系在有机太阳能电池中的应用引起了化学工作者的广泛兴趣.本文介绍了共轭聚合物/C₆₀复合体系的光诱导电子转移,以及近年来该体系在光伏打电池中的研究进展.     

面向非富勒烯型有机光伏电池的聚合物给体材料设计

可溶液加工的有机光伏电池(OPV)是一种具有重要应用潜力的新型光伏技术。在OPV技术的发展过程中,富勒烯衍生物作为电子受体材料占据了相当长时间的统治地位,因此聚合物给体材料设计中对如何与富勒烯受体材料相互匹配考虑较多。最近几年来,基于聚合物给体和非富勒烯有机受体的OPV电池,简称为非富勒烯型NF-OPV,得到了十分快速的发展。在此类电池中,聚合物电子给体和非富勒烯型电子受体材料均起到了十分重要的作用。相比于较为经典的富勒烯型OPV,NF-OPV对聚合物给体的光电特性和聚集态结构提出了新的要求。因此,本文针对NF-OPV的特点,重点介绍NF-OPV对聚合物给体材料的吸收光谱、分子能级以及聚集态结构等特征的新要求,总结最近几年来的相关进展,并在此基础上进一步讨论聚合物电子给体材料面临的挑战和展望。     

A-π-D-π-A small-molecule donors with different end alkyl chains obtain different morphologies in organic solar cells

The small molecular donors with different end alkyl chains provide appropriate phase separation and molecular stacking orientation for all-small-molecule solar cells. The power conversion efficiency (PCE) have been improved obviously, and the highest PCE reaches 7.06%. The results demonstrate that the optimized end alkyl chains can be used to design A-π-D-π-A backbone structure small molecular electron donors for small-molecule organic solar cells.     

Modular synthesis of functionalized benzosiloles by tin-mediated cyclization of (o-Alkynylphenyl)silane

Trimethylstannyllithium promotes cyclization of (o-alkynylphenyl)silane into a 3-stannylbenzosilole, via addition to the triple bond followed by intramolecular cyclization in a cascade fashion. This intermediate can be functionalized with either electrophiles or nucleophiles to allow modular synthesis of 2,3-disubstituted benzosiloles. One of these compounds, a phenylene-bis(benzosilole) compound, shows electron drift mobility as high as 6 x 10-4 cm2/Vs in an amorphous film, making this class of compounds promising electronic materials for organic light emitting devices and organic photovoltaic cells.     

Multifunctional Conjugated Polymers with Main‐Chain Donors and Side‐Chain Acceptors for Dye Sensitized Solar Cells (DSSCs) and Organic Photovoltaic Cells (OPVs)

A novel multifunctional conjugated polymer (RCP‐1) composed of an electron‐donating backbone (carbazole) and an electron‐accepting side chain (cyanoacetic acid) connected through conjugated vinylene and terthiophene has been synthesized and tested as a photosensitizer in two major molecule‐based solar cells, namely dye sensitized solar cells (DSSCs) and organic photovoltaic cells (OPVs). Promising initial results on overall power conversion efficiencies of 4.11% and 1.04% are obtained from the basic structure of DSSCs and OPVs based on RCP‐1, respectively. The well‐defined donor (D)‐acceptor (A) structure of RCP‐1 has made it possible, for the first time, to reach over 4% of power conversion efficiency in DSSCs with an organic polymer sensitizer and good operation stability.     

Dipyrrin-based Complexes for Solution-processed Organic Solar Cells

Three dipyrrin-containing metal complexes and a boron dipyrromethene(BODIPY)-containing complex were designed and synthesized. The photophysical properties, electrochemical behaviours and photovoltaic performance were extensively investigated. Density functional theory calculations were also performed on those complexes. These complexes, together with electron-acceptor [6,6]-phenyl-C71-butyric acid methyl ester, were utilized for the fabrication of solution-processed bulk heterojunction solar cells as the electron-donor materials. The more efficient electron acceptor BODIPY segment renders a lower energy gap and a relatively better photovoltaic conversion efficiency of 0.58%. These results prove that BODIPY segment has a great potential for constructing efficient organic solar cell materials.     

The Influence of Charge Transport and Recombination on the Performance of Dye‐Sensitized Solar Cells

Electrochemical impedance spectroscopy (EIS) and transient voltage decay measurements are applied to compare the performance of dye sensitized solar cells (DSCs) using organic electrolytes, ionic liquids and organic‐hole conductors as hole transport materials (HTM). Nano‐crystalline titania films sensitized by the same heteroleptic ruthenium complex NaRu(4‐carboxylic acid‐4′‐carboxylate) (4,4′‐dinonyl‐2,2′‐bipyridyl)(NCS)₂ , coded Z‐907Na are employed as working electrodes. The influence of the nature of the HTM on the photovoltaic figures of merit, that is, the open circuit voltage, short circuit photocurrent and fill factor is evaluated. In order to derive the electron lifetime, as well as the electron diffusion coefficient and charge collection efficiency, EIS measurements are performed in the dark and under illumination corresponding to realistic photovoltaic operating conditions of these mesoscopic solar cells. A theoretical model is established to interpret the frequency response off the impedance under open circuit conditions, which is conceptually similar to photovoltage transient decay measurements. Important information on factors that govern the dynamics of electron transport within the nanocrystalline TiO₂ film and charge recombination across the dye sensitized heterojunction is obtained.     

Solution-processed bilayer photovoltaic devices with nematic liquid crystals

The cross-linking of polymerisable liquid crystalline semiconductors is a promising approach to solution-processable, multilayer, organic photovoltaics. Here we demonstrate an organic bilayer photovoltaic with an insoluble electron-donating layer formed by cross-linking a nematic reactive mesogen. We investigate a range of perylene diimide (PDI) materials, some of which are liquid crystalline, as the overlying electron acceptor layer. We find that carrier mobility of the acceptor materials is enhanced by liquid crystallinity and that mobility limits the performance of photovoltaic devices.     

Controlling Interfacial Recombination in Aqueous Dye‐Sensitized Solar Cells by Octadecyltrichlorosilane Surface Treatment

A general and convenient strategy is proposed for enhancing photovoltaic performance of aqueous dye‐sensitized solar cells (DSCs) through the surface modification of titania using an organic alkyl silane. Introduction of octadecyltrichlorosilane on the surface of dyed titania photoanode as an organic barrier layer leads to the efficient suppression of electron recombination with oxidized cobalt species by restricting access of the cobalt redox couple to the titania surface. The champion ODTS‐treated aqueous DSCs (0.25 mM ODTS in hexane for 5 min) exhibit a V_oc of 821±4 mV and J_sc of 10.17±0.21 mA cm^?2, yielding a record PCE of 5.64±0.10 %. This surface treatment thus serves as a promising post‐dye strategy for improving the photovoltaic performance of other aqueous DSCs.     

Synthesis of new perylene imide dyes and their photovoltaic performances in nanocrystalline TiO2 dye-sensitized solar cells

Eight novel perylene imide derivatives were synthesized to determine the effect of the nature of electron donating substituents on the perylene core (ether or N-amino), the position of the carboxylic acid anchoring group and the presence of a fused benzimidazole moiety on the performances of dye-sensitized solar cells. The photovoltaic efficiency under AM1.5 of these new dyes, although not optimized, ranges from 0.2% until 2.3%. We note the importance of the position-anchoring group, which controls the electron injection efficiency. With respect to the excited-state electron donor strength, four O-aryl substituents at the bay position lead to similar effect as two N-piperidinyl groups but with a lower propensity to aggregation and give slightly higher photovoltaic performance than the latter. The benzimidazole unit extends the absorbance of the perylene imide to longer wavelengths, but this effect is lower than introducing charge transfer transition with N-amino substituents. Overall, this work shows that perylene imide remains a promising molecular basis for the future design of new fully organic sensitizers for nanostructured TiO₂ solar cells.     

New tetrazole-based organic dyes for dye-sensitized solar cells

A series of new metal-free organic dyes that contain donors with triphenylamine or its derivatives and tetrazole-based acceptors were synthesized and characterized by photophysical, electrochemical, and theoretical computational methods. They were applied in nanocrystalline TiO_2 solar cells(DSSCs). It is found that the introduction of diphenylamine units as antennas in the as-synthesized dyes could improve photovoltaic performance compared with phenothiazine and carbazole units as antennas in DSSCs. The dye with(2H-tetrazol-5-yl) acrylonitrile electron acceptor also displayed the highest solar-to-electrical energy conversion efficiency.     

Electron transporting semiconducting polymers in organic electronics

Significant progress has been achieved in the preparation of semiconducting polymers over the past two decades, and successful commercial devices based on them are slowly beginning to enter the market. However, most of the conjugated polymers are hole transporting, or p-type, semiconductors that have seen a dramatic rise in performance over the last decade. Much less attention has been devoted to electron transporting, or n-type, materials that have lagged behind their p-type counterparts. Organic electron transporting materials are essential for the fabrication of organic p-n junctions, organic photovoltaic cells (OPVs), n-channel organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs) and complementary logic circuits. In this critical review we focus upon recent developments in several classes of electron transporting semiconducting polymers used in OLEDs, OFETs and OPVs, and survey and analyze what is currently known concerning electron transporting semiconductor architecture, electronic structure, and device performance relationships (87 references).     

Strategies for controlling the active layer morphologies in OPVs

This review focuses on the recent developments in our understanding of active layer morphologies for organic photovoltaic cells and approaches to obtain active layer morphologies for high power conversion efficiencies. The evolution of active layer morphologies, as studied by high resolution electron microscopy, X-ray and neutron scattering, and dynamic secondary ion mass spectrometry, is covered, along with strategies including the use of small molecule additives, polymer nanowires and polymer nanoparticles to realize active layer morphologies. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

A–π–D–π–A Electron‐Donating Small Molecules for Solution‐Processed Organic Solar Cells: A Review

Organic solar cells based on semiconducting polymers and small molecules have attracted considerable attention in the last two decades. Moreover, the power conversion efficiencies for solution‐processed solar cells containing A–π–D–π–A‐type small molecules and fullerenes have reached 11%. However, the method for designing high‐performance, photovoltaic small molecules still remains unclear. In this review, recent studies on A–π–D–π–A electron‐donating small molecules for organic solar cells are introduced. Moreover, the relationships between molecular properties and device performances are summarized, from which inspiration for the future design of high performance organic solar cells may be obtained.     

Effect of chenodeoxycholic acid (CDCA) additive on phenothiazine dyes sensitized photovoltaic performance

The effects of chenodeoxycholic acid (CDCA) in a dye solution as a co-adsorbent on the photovoltaic performance of dye-sensitized solar cells (DSSCs) based on two organic dyes containing phenothiazine and triarylamine segments (P1 and P2) were investigated.It was found that the coadsorption of CDCA can hinder the formation of dye aggregates and improve electron injection yield and thus Jsc.This has also led to a rise in photovoltage,which is attributed to the decrease of charge recombination.The DSSC based ...     

Photophysical and Electrochemical Properties,and Molecular Structures of Organic Dyes for Dye‐Sensitized Solar Cells

Dye‐sensitized solar cells (DSSCs) based on organic dyes adsorbed on oxide semiconductor electrodes, such as TiO₂, ZnO, or NiO, which have emerged as a new generation of sustainable photovoltaic devices, have attracted much attention from chemists, physicists, and engineers because of enormous scientific interest in not only their construction and operational principles, but also in their high incident‐solar‐light‐to‐electricity conversion efficiency and low cost of production. To develop high‐performance DSSCs, it is important to create efficient organic dye sensitizers, which should be optimized for the photophysical and electrochemical properties of the dyes themselves, with molecular structures that provide good light‐harvesting features, good electron communication between the dye and semiconductor electrode and between the dye and electrolyte, and to control the molecular orientation and arrangement of the dyes on a semiconductor surface. The aim of this Review is not to make a list of a number of organic dye sensitizers developed so far, but to provide a new direction in the epoch‐making molecular design of organic dyes for high photovoltaic performance and long‐term stability of DSSCs, based on the accumulated knowledge of their photophysical and electrochemical properties, and molecular structures of the organic dye sensitizers developed so far.     

Synthesis and photovoltaic properties of organic sensitizers incorporating a thieno[3,4-c]pyrrole-4,6-dione moiety

Novel organic sensitizers containing a thieno[3,4-c]pyrrole-4,6-dione (TPD) moiety with triphenylamine or julolidine as the electron donor have been designed and synthesized for quasi-solid-state dye-sensitized solar cells (DSSCs). For comparison, two organic dyes based on a terthiophene spacer have also been synthesized. The absorption, electrochemical and photovoltaic properties of all sensitizers have been systematically investigated. We found that the incorporation of TPD is highly beneficial to broaden the absorption spectra of the organic sensitizers and prevent the intermolecular interaction. Therefore, the charge recombination possibility is reduced, which is revealed by the controlled intensity modulated photovoltage spectroscopy. A quasi-solid-state DSSC based on sensitizer FNE38 with TPD and triphenylamine moieties demonstrates a solar energy conversion efficiency of 4.71% under standard AM 1.5G sunlight without the use of coadsorbant agents.