超大孔离子交换制备色谱分离纯化高活性凝血因子VIII

建立了一条从人血浆中分离高活性凝血因子VIII(FVIII)的纯化工艺。基于FVIII和介质孔径的尺度比及其对蛋白质活性影响的分析,设计了以超大孔离子交换制备色谱为核心步骤的新型分离纯化工艺。分别进行超大孔离子交换色谱与传统离子交换色谱的条件优化,并对优化工艺所得产品进行了活性检测(底物显色法)和纯度检测(高效凝胶过滤和凝胶电泳)。结果表明,超大孔介质结构不但可以有效地保护蛋白质大分子结构,而且能够大幅度地提高制备色谱的传质速率,从而得到具有高凝血活性的FVIII产品。FVIII在超大孔制备色谱过程中的回收率(85%)比传统离子交换制备色谱高4～5倍,产品比活高达154 IU/mg。此外,还研究了超大孔介质的再生程序,采用5个柱体积的1 mol/L NaOH低流速清洗色谱柱,保证了色谱工艺的稳定性。本纯化工艺步骤简单,重现性好,易于放大生产。     

Continuous superporous agarose beds for chromatography and electrophoresis

Continuous agarose beds (monoliths) were prepared by casting agarose emulsions designed to generate superporous agarose. The gel structures obtained were transected by superpores (diameters could be varied in the range 20-200 microns) through which liquids could be pumped. The pore structure and the basic properties of the continuous gel were investigated by microscopy and size exclusion chromatography. The chromatographic behaviour was approximately the same as for beds packed with homogeneous agarose beads with a particle diameter equivalent to the distance between the superpores. In one application, the superporous continuous agarose bed was derivatized with a NAD+ analogue and used in the affinity purification of bovine lactate dehydrogenase from a crude extract. In another application, a new superporous composite gel material was prepared by adding hydroxyapatite particles to the agarose phase. The composite bed was used to separate a protein mixture by hydroxyapatite chromatography. In a third application, the continuous superporous agarose material was used as an electrophoresis gel. Here, a water-immiscible organic liquid was pumped through the superpores to dissipate the joule heat evolved, thus allowing high current densities.     

Superporous agarose beads as a hydrophobic interaction chromatography support

Superporous agarose beads were used as a support for hydrophobic interaction chromatography. These beads have large connecting flow pores in addition to their normal diffusion pores. The flow pores, which are approximately one fifth of the overall diameter of the superporous agarose beads, were earlier shown to give the beads improved mass transfer properties relative to homogeneous agarose beads (Gustavsson and Larsson, J. Chromatogr. A, 734 (1996) 231–240). Superporous agarose beads and homogeneous agarose beads of the same particle size range (106–180 μm) were derivatized with phenyl groups. The properties of the superporous beads were then compared with the homogeneous beads in the separation of a mixture of three model proteins (ribonuclease A, lysozyme and bovine serum albumin) at various superficial flow velocities from 30 to 600 cm/h. The superporous beads gave satisfactory separation at flow velocities five times higher than was possible for homogeneous beads. The performance of the two types of beads was also compared in the purification of lactate dehydrogenase from a beef heart extract at a superficial flow velocity of 150 cm/h. The superporous beads performed considerably better, leading to twice the purification factor and twice the concentration of the desired product. The results were interpreted using the theoretical treatment given by Carta and Rodrigues (Carta and Rodrigues, Chem. Eng. Sci., 48 (1993) 3927).     

SUPERPOROUS HYDROGELS: FAST RESPONSIVE HYDROGEL SYSTEMS

ABSTRACT

Superporous hydrogels, hydrogels with pore sizes in the range of 100 μm and larger, were synthesized using N-isopropyl-acrylamide (NIPAM) and acrylamide (AM). The superporous hydrogels were synthesized by crosslinking polymerization of monomers in the presence of gas bubbles. The pores of superporous hydrogels were connected to each other to form open capillary channels, which provided fast response to the changes in the environmental temperature. Upon increase in temperature from 10°C to 65°C, the superporous hydrogel made from a monomer solution of NIPAM:AM = 9:1 shrank from the fully swollen state (volume of 36 cm³) to the fully collapsed state (volume of 6.5 cm³) in 72±14 sec. When the temperature was changed back to 10°C, the superporous hydrogel swelled to 36 cm³ in 78±15 sec. This deswelling-swelling cycle was repeated many times without changes in the thermo-reversible property of the superporous hydrogel. The response time of the superporous hydrogels was thousand times faster than that of conventional hydrogels. The fast response of the superporous hydrogels is due to the rapid uptake or exclusion of water molecules through the extensive capillary channels. Because superporous hydrogels still maintain the open capillary structure even after drying, the dried superporous hydrogels can also swell to the equilibrium swelling state within minutes. These fast responsive hydrogels can find many pharmaceutical and medical applications.     

Continuous superporous agarose beds in radial flow columns

Continuous superporous agarose beds constitute a new support material for chromatography, biocatalysis and electrophoresis. The bed consists of a single piece of agarose gel, homogeneously transected by flow-carrying pores, which easily can be varied in the range of 10-100 microm. In this work, large diameter beds (60 mm) were prepared and used in specially designed radial flow columns. The basic chromatographic properties of the beds were investigated by size-exclusion chromatography experiments. In an affinity chromatography application one bed was derivatized with Cibacron Blue 3GA and used for the purification of lactate dehydrogenase from a crude bovine heart extract. In a biotransformation application one bed was provided with immobilized beta-galactosidase and used in the production of lactose-free milk.     

Synthesis and properties of poly(acrylamide‐co‐acrylic acid)/polyacrylamide superporous IPN hydrogels

Poly(acrylamide‐co‐acrylic acid)/polyacrylamide [P(AM‐co‐AA)/PAM] hydrogel with superporous and interpenetrating network (IPN) structure was prepared by a prepolymerization reaction and a synchronous polymerization reaction and frothing process. Scanning electron microscope (SEM) images show that the resultant hydrogel possesses abundant interconnected pores. DSC indicates that the porous structure enhances the swelling ratio and reduces the interaction between water and the hydrogel. In contrast, the IPN by PAM decreases water absorbency and enhances water retentivity. It is found that a superporous stucture in the hydrogel increases the equilibrium swelling ratio and decreases the compressive strength of the hydrogel. On the other hand, the increase in AM oligomer (oligo‐AM) amount decreases the equilibrium swelling ratio and improves the compressive strength of the hydrogel. Therefore, the two‐steps synthesis method can be used to construct a hydrogel with superporous and IPN structure. The swelling and mechanical properties of the hydrogel can be improved effectively. Copyright © 2008 John Wiley & Sons, Ltd.     

Fabrication of superporous agarose beads for protein adsorption: Effect of CaCO3 granules content

Agarose gels were fabricated by water-in-oil emulsification with the addition of CaCO₃ granules at 8–16 wt%. Thus agarose beads of different superporosities were produced after dissolving the solid porogen. The superporous agarose (SA) and homogeneous agarose gels were double cross-linked and modified with diethylaminoethyl chloride to produce anion exchangers. We have proposed to use a superporous replica (porous titania microspheres) to examine the superporous structure and pore size distribution of the soft gel. The replica was prepared with the agarose gel entrapping CaCO₃ granules by a sol–gel-templating method. It was found that the superpores created by CaCO₃ granules were uniformly distributed and ranged from 0.95 μm to 1.33 μm. The physical properties of the gels were significantly affected by the porogen content. Importantly, by increasing the solid porogen to 12 wt%, the bed permeability and effective porosity increased about 48% and 33%, respectively. Further increase in the porogen to 16 wt% led to a decrease of the mechanical strength. With increasing superpores in the beads, the dynamic adsorption capacity of the packed columns increased obviously at 305–916 cm/h. Besides, the column efficiency changed less with increasing flow velocity up to 1200 cm/h. It was concluded that the use of 12 wt% CaCO₃ granules in agarose solution was beneficial for the fabrication of the SA gel with good mechanical stability and promising performance for protein chromatography.     

Dextran-grafted cation exchanger based on superporous agarose gel: Adsorption isotherms,uptake kinetics and dynamic protein adsorption performance

A novel chromatographic medium for high-capacity protein adsorption was fabricated by grafting dextran (40 kDa) onto the pore surfaces of superporous agarose (SA) beads. The bead was denoted as D-SA. D-SA, SA and homogeneous agarose (HA) beads were modified with sulfopropyl (SP) group to prepare cation exchangers, and the adsorption and uptake of lysozyme on all three cation-exchange chromatographic beads (SP-HA, SP-SA and SP-D-SA) were investigated at salt concentrations of 6–50 mmol/L. Static adsorption experiments showed that the adsorption capacity of SP-D-SA (2.24 mmol/g) was 78% higher than that of SP-SA (1.26 mmol/g) and 54% higher than that of SP-HA (1.45 mmol/g) at a salt concentration of 6 mmol/L. Moreover, salt concentration had less influence on the adsorption capacity and dissociation constant of SP-D-SA than it did on SP-HA, suggesting that dextran-grafted superporous bead is a more potent architecture for chromatographic beads. In the dynamic uptake of lysozyme to the three cation-exchange beads, the D_e/D₀ (the ratio of effective pore diffusivity to free solution diffusivity) values of 1.6–2.0 were obtained in SA-D-SA, indicating that effective pore diffusivities of SP-D-SA were about two times higher than free solution diffusivity for lysozyme. At 6 mmol/L NaCl, the D_e value in SA-D-SA (22.0 × 10⁻¹¹ m²/s) was 14.4-fold greater than that in SP-HA. Due to the superior uptake kinetics in SA-D-SA, the highest dynamic binding capacity (DBC) and adsorption efficiency (the ratio of DBC to static adsorption capacity) was likewise found in SP-D-SA. It is thus confirmed that SP-D-SA has combined the advantages of superporous matrix structure and drafted ligand chemistry in mass transport and offers a new opportunity for the development of high-performance protein chromatography.     

Superporous agarose anion exchangers for plasmid isolation

Superporous agarose beads have wide, connecting flow pores allowing large molecules such as plasmids to be transported into the interior of the beads by convective flow. The pore walls provide additional surface for plasmid binding thus increasing the binding capacity of the adsorbent. Novel superporous agarose anion exchangers have been prepared, differing with respect to bead diameter, superpore diameter and type of anion-exchange functional group (poly(ethyleneimine) and quaternary amine). The plasmid binding capacities were obtained from breakthrough curves and compared with the binding capacity of homogeneous agarose beads of the same particle size. Significantly, the smaller diameter superporous agarose beads were found to have four to five times higher plasmid binding capacity than the corresponding homogeneous agarose beads. The experimentally determined plasmid binding capacity was compared with the theoretically calculated surface area for each adsorbent and fair agreement was found. Confocal microscopy studies of beads with adsorbed, fluorescently labelled plasmids aided in the interpretation of the results. Superporous poly(ethyleneimine)-substituted beads with a high ion capacity (230 micromol/ml) showed a plasmid binding of 3-4 mg/ml adsorbent. Superporous quaternary amine-substituted beads had a lower ion capacity (81 micromol/ml) and showed a correspondingly lower plasmid binding capacity (1-2 mg/ml adsorbent). In spite of the lower capacity, the beads with quaternary amine ligand were preferred, due to their much better plasmid recovery (70-100% recovery). Interestingly, both capacity and recovery was improved when the plasmid adsorption step was carried out in the presence of a moderate salt concentration. The most suitable superporous bead type (45-75 microm diameter beads; 4 microm superpores; quaternary amine ligand) was chosen for the capture of plasmid DNA from a clarified alkaline lysate. Two strategies were evaluated, one with and one without enzymatic digestion of RNA. The strategy without RNase gave high plasmid recovery, quantitative removal of protein and a 70% reduction in RNA.     

Anion-exchange supermacroporous monolithic matrices with grafted polymer brushes of N,N-dimethylaminoethyl-methacrylate

Graft polymerization using potassium diperiodatocuprate as initiator was found to be an effective and convenient method for grafting functional polymer of N,N-dimethylaminoethyl methacrylate (DMAEMA) onto superporous polyacrylamide gels, so-called cryogels (pAAm cryogels). It was possible to achieve grafting degrees up to 110% (w/w). The two-step graft polymerization i.e. first activation of the matrix followed by displacement of initiator solution with the monomer solution, decreased pronouncedly the soluble homopolymer formation. The efficiency of graft polymerization using a two-step technique increased up to 50% (w/w) at a monomer conversion of 10%, compared to 10% graft efficiency with 60-70% monomer conversion for one-step direct graft polymerization. The pAAm cryogels grafted in one-step and two-step procedures, respectively, behaved similarly when binding low-molecular weight ligand but showed very different behavior for sorption of a high-molecular-weight ligand, bovine serum albumin (BSA). The differences in behavior were rationalized assuming different structure of the graft polymer layers and tentacle-type BSA binding to the grafted polymer.     

Density matrix purification with rigorous error control

Density matrix purification, although being a powerful tool for linear scaling construction of the density matrix in electronic structure calculations, has been limited by uncontrolled error accumulation. In this article, a strategy for the removal of small matrix elements in density matrix purification is proposed with which the forward error can be rigorously controlled. The total forward error is separated into two parts, the error in eigenvalues and the error in the occupied invariant subspace. We use the concept of canonical angles to measure and control differences between exact and approximate occupied subspaces. We also analyze the conditioning of the density matrix construction problem and propose a method for calculation of interior eigenvalues to be used together with density matrix purification.     

Determination of Glucose in Diluted Blood with a Thermal Flow Injection Analysis Biosensor

Abstract

The glucose concentration in diluted whole blood has been measured, using a miniaturized thermal biosensor based on the enzyme thermistor principle. The biosensor is a small flow injection system. A sample volume of 20μl is injected into a flow of 50μl/min. The heat produced when the sample passes the enzyme column is measured with a thermistor connected to a Wheatstone bridge. The enzyme column contains glucose oxidase and catalase co-immobilized on a solid support material. Samples of whole blood usually cause problems in flow-systems. The blood cells tend to block the enzyme column and the back pressure increases. We have tested a superporous agarose material as enzyme support material using tenfold diluted samples of whole human blood. The blood was collected from the finger-tip and diluted with buffer containing an anticoagulant and sodium fluoride. The number of samples possible to inject and the accuracy compared to the Boehringer Mannheim Reflolux have been determined. At least 100 ten-fold diluted blood samples could be injected on a micro-column of superporous agarose. The obtained glucose concentration correlated well with the one obtained with the reference instrument.     

Synthesis and properties of a novel squaraine dye modified by ferrocene

A novel squaraine dye（SQ） modified by ferrocene has been synthesized through（E）-dodecyl-2-ferrocenyl vinyl-1H-pyrrole and squaric acid.The molecular structure of SQ was characterized by ¹H NMR,¹³C NMR,MS and elemental analysis.SQ is high soluble in common solvents.The maximum absorptions of SQ in different solvents are in the range of 708-734 nm,exhibiting positive solvatochromism with increasing solvent polarity.The optical and electrical properties of SQ indicate that it is a promising electron donor material for bulk-heterojunction organic solar cell.     

Preparation, UV-vis, IR, EPR and resonance Raman study of Fe, Ni, Co and Zn dioxolene complexes

An UV-vis, Raman, IR and EPR spectroscopic study was performed for the water soluble complexes of Fe(III), Ni(II), Co(II) and Zn(II) coordinated to dioxolene ligands derived from oxidized dopamine. The complexes were obtained and stabilized at neutral pH by the strong reducing agent sodium thiosulfate. Iron(III) stabilizes the ligand in catecholate form as [Fe(III)(Cat)2]1-, Cat=dopacatecholate, and the divalent metals as dopasemiquinone (SQ): [Ni(SQ)3]1-, [Co(SQ)3]1- and [Zn(SQ)3]1-. The resonance Raman spectra of the solid complexes as [CAT][Ni(SQ)3], [CTA][Co(SQ)3] and [CTA][Zn(SQ)3], CTA is the cetyltrimethylammonium, are very similar to the spectra of the complexes in solution, while the Fe(III) complex is a mixture of two iron complexes, with catecholate or dopasemiquinone ligands.     

Novel monofunctional and bifunctional boronic acid‐functionalized squarylium dyes as precolumn and on‐column labels for protein analysis by capillary electrophoresis with laser‐induced fluorescence

This article presents a continuous capillary electrophoresis with laser‐induced fluorescence (CE‐LIF) following spectral studies of the noncovalent interactions between novel Squarylium Boronic Acid 4 (SQ‐BA4) & Squarylium Diboronic Acid 2 (SQ‐DBA2) squarylium dyes and human serum albumin (HSA). Two protocols were used wherein the on‐column‐labeling protocol was found to be more sensitive than the precolumn one by showing a better enhancement in the peak area of the HSA–dye complex besides lower limits of detection (LODs) for HSA. Also, stability studies were conducted with or without HSA using precolumn‐labeling mode over one week exhibiting the superiority of SQ‐BA4 to SQ‐DBA2. Then, a mixture containing three model proteins, HSA, β‐lactoglobulin B, and transferrin, was labeled on‐column with both dyes and completely resolved by CE‐LIF after optimization of several parameters. Both dyes provided lower LODs for HSA than those of β‐lactoglobulin B and transferrin with higher sensitivities. In addition, the SQ‐BA4 dye showed again greater sensitivities with all the three proteins than SQ‐DBA2.     

Site-selective binding and dual mode recognition of serum albumin by a squaraine dye

With the objective of developing small molecule based probes for proteins, interactions of polyhydroxyl-substituted squaraine dye (SQ) with bovine serum albumin (BSA) have been investigated by absorption, steady-state and time-resolved fluorescence, circular dichroism (CD), cyclic voltammetry (CV), 1H NMR, scanning electron, and tapping mode atomic force microscopic techniques. Increase in addition of BSA resulted in increase in absorbance and fluorescence quantum yields (80-fold) of SQ, along with significant bathochromic shifts in the absorption and fluorescence maxima. Half-reciprocal analysis of the absorption data gave a 1:1 stoichiometry for the complex between BSA and SQ with high association (Kass) constant of (1.4 +/- 0.1) x 106 M-1 and change in free energy of -35 kJ/mol. The complex formation was further confirmed by observation of induced CD signal corresponding to the SQ chromophore at 610 nm, upfield shift (about Deltadelta 0.1 ppm) of aromatic protons of SQ in 1H NMR spectra, and decrease in current intensity (CV) of SQ when bound to BSA. The picosecond time-resolved fluorescence studies indicated that the BSA-SQ complex exhibits biexponential decay with significantly enhanced lifetimes of 0.5 and 1.5 ns when compared to the lifetime of SQ (tau = 121 ps) in the absence of BSA. Employing displacement cum fluorimetry using site-specific binding ligands, such as dansylproline and dansylamide, indicated that SQ binds with protein selectively at site II involving hydrophobic, hydrogen bonding, and electrostatic interactions. The uniqueness of this molecular system is that it interacts with BSA selectively at site II and signals the binding event through dual mode recognition of "visual color" change and "turn on" fluorescence mechanism.     

New molecular assemblies of redox isomers, [CrIII(X4SQ)3-n(X4Cat)n]-n (X = Cl and Br; n = 0, 1, and 2), with metallocenium cations, [MIIICp2]+ (M = Co and Fe): X-ray crystal structures and physical properties

A series of redox isomers of [CrIII(X4SQ)(X4Cat)2]2-, [CrIII(X4SQ)2(X4Cat)]-, and [CrIII(X4SQ)3]0 (X = Cl and Br, SQ = semiquinonate, and Cat = catecholate) have been synthesized and characterized as charge-transfer (CT) compounds with metallocenium cations: (CoIIICp2)2[CrIII(Cl4SQ)(Cl4Cat)2] (1), (CoIIICp2)2[CrIII(Br4SQ)(Br4Cat)2] (2), (FeIIICp2)[CrIII(Cl4SQ)2(Cl4Cat)].C6H6 (4), (FeIIICp2)[CrIII(Br4SQ)2(Br4Cat)].CS2 (5), and (FeIIICp2)[CrIII(Cl4SQ)2(Cl4Cat)][CrIII(Cl4SQ)3] (6). First, the oxidation states of the chromium complexes are strongly dependent on the redox potentials of the metallocenes used. The CoIICp2, exhibiting stronger reduction power than FeIICp2, is useful for two-electron reduction of the [CrIII(X4SQ)3]0, affording [CrIII(X4SQ)(X4Cat)2]2- (1 and 2), which are first isolated and crystallographically characterized in the solid state. In contrast the reaction with FeIICp2 affords only [CrIII(X4SQ)2(X4Cat)]- (4 and 5). Second, solvents influence crystal structures of these compounds. The solvent set of C6H6/CS2 gives 1:1:C6H6 compound 4 with unique charged anions, [CrIII(Cl4SQ)2(Cl4Cat)]-, while the other set, n-C6H12/CS2, affords 1:2 compound 6 including the two redox isomers, [CrIII(Cl4SQ)2(Cl4Cat)]- and [CrIII(Cl4SQ)3]0. The [CrIII(X4SQ)(X4Cat)2]2- anions in 1 and 2 show no significant interconnection between them (discrete type), while the [CrIII(X4SQ)2(X4Cat)]- anions in 4-6 show one-dimensional column-type structures with the aid of intermolecular stacking interactions of the ligand moieties. The anions in 4 show additional stacking interaction with the [FeIIICp2]+ to form one-dimensional ...[D][A][S][D][A]... (D = [FeIIICp2]+, A = [CrIII(Cl4SQ)2(Cl4Cat)]-, and S = C6H6) type mixed-stack arrangements similar to that of previously reported (CoIIICp2)[CrIII(Cl4SQ)2(Cl4Cat)].C6H6 (3). Compound 6 forms a two-dimensional sheet structure where the two redox isomers, [CrIII(Cl4SQ)2(Cl4Cat)]- and [CrIII(Cl4SQ)3]0, are included. The sheet is regarded as a mixed-valence molecular assembly. Two types of the anions, [CrIII(X4SQ)(X4Cat)2]2- (1 and 2) and [CrIII(X4SQ)2(X4Cat)]- (4-6), exhibiting an intramolecular mixed-valence state, show intramolecular intervalence CT transition (IVCT) from the Cat to the SQ at near 5800 and 4300 cm-1, respectively, both in the solution and in the solid states. The intermolecular mixed-valence state of 6 was characterized by absorption spectroscopy, electric conductivity, and SQUID magnetometry. Interestingly, this mixed-valence state of the chromium module is dependent on the redox active nature of the coordinated ligands.     

Seriniquinones as Therapeutic Leads for Treatment of BRAF and NRAS Mutant Melanomas

Isolated from the marine bacteria Serinicoccus sp., seriniquinone (SQ1) has been characterized by its selective activity in melanoma cell lines marked by its modulation of human dermcidin and induction of autophagy and apoptosis. While an active lead, the lack of solubility of SQ1 in both organic and aqueous media has complicated its preclinical evaluation. In response, our team turned its effort to explore analogues with the goal of returning synthetically accessible materials with comparable selectivity and activity. The analogue SQ2 showed improved solubility and reached a 30–40-fold greater selectivity for melanoma cells. Here, we report a detailed comparison of the activity of SQ1 and SQ2 in SK-MEL-28 and SK-MEL-147 cell lines, carrying the top melanoma-associated mutations, BRAF^V600E and NRAS^Q61R, respectively. These studies provide a definitive report on the activity, viability, clonogenicity, dermcidin expression, autophagy, and apoptosis induction following exposure to SQ1 or SQ2. Overall, these studies showed that SQ1 and SQ2 demonstrated comparable activity and modulation of dermcidin expression. These studies are further supported through the evaluation of a panel of basal expression of key-genes related to autophagy and apoptosis, providing further insight into the role of these mutations. To explore this rather as a survival or death mechanism, autophagy inhibition sensibilized BRAF mutants to SQ1 and SQ2, whereas the opposite happened to NRAS mutants. These data suggest that the seriniquinones remain active, independently of the melanoma mutation, and suggest the future combination of their application with inhibitors of autophagy to treat BRAF-mutated tumors.     

D-A-D-based Unsymmetrical Thiosquaraine Dye for the Dye-Sensitized Solar Cells†

In dye-sensitized solar cell, modulating the electronic properties of the sensitizer by varying the donor, π-spacer, acceptor and anchoring groups help optimizing the structure of the dye for better device performance. Here, a donor–acceptor–donor-based unsymmetrical thiosquaraine sensitizer ( SQ5S ) has been designed and synthesized. Photophysical, electrochemical, theoretical and photovoltaic characterizations of SQ5S dye have been compared with its oxygen analog, SQ5 . The incorporation of the sulfur atom in the acceptor unit of SQ5S dye showed an intense peak at 688 nm, which was 38 nm of red-shifted and showed the panchromatic light harvesting response with the onset of 850 nm compared with SQ5 dye. The LUMO and HOMO energy levels are well aligned with the conduction band of TiO₂ and the redox potential of electrolyte for the charge injection and the dye-regeneration processes, respectively. Photovoltaic efficiency of 1.51% (V_OC 610 mV, J_SC 3.07 mA cm⁻², ff 81%) has been achieved for SQ5S dye, whereas SQ5 showed the device performance of 5.43% (V_OC 723 mV, J_SC 9.3 mA cm⁻², ff 80%). The decreased device performance for the dye SQ5S has been attributed to the favorable intersystem crossing process associated with the photoexcited SQ5S that reduces the driving force for the charge injection process.     

Protein Separation and Enzyme Purification by Preparative Capillary Isotachophoresis

The use of preparative capillary isotachophoresis (CITP), operating in a discontinuous fractionation mode, for separation and fast purification of the enzyme uridine diphosphate galactopyranose mutase (UGM) from the cell extract of Escherichia coli overproducing the recombinant enzyme is presented in this feasibility study. UGM is required to produce galactofuranose for the cell wall biosynthesis of many pathogenic microorganisms and represents a very attractive candidate for the development of new antimicrobial drugs. CITP separations were carried out under slightly alkaline pH conditions (8.7), in which UGM enzyme is negatively charged. Significantly simplified proteinous matrix isolated in several fractions by employed preparative CITP procedure with the aid of properly selected discrete spacers was subsequently confirmed by SDS PAGE with Coomassie staining. It was shown that preparative CITP is very effective tool for fast purification of the target enzyme from other proteinous matrix constituents when purification and isolation step lasted 20 min. The enzymatic activity of UGM was confirmed in the sample after the preparative CITP purification step, which is a crucial requirement for further biochemical applications.