Preferential adsorption of bovine serum albumin dimer onto polymer microspheres having a heterogeneous surface consisting of hydrophobic and hydrophilic parts

The adsorption behaviors of bovine serum albumin (BSA) containing both dimeric and monomeric species onto polymer microspheres were examined using various homopolymers and poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres which were produced by the emulsifier-free (seeded) emulsion polymerization technique. The preferential adsorption of the BSA dimer was clearly observed in an optimum region of the surface hydrophilicities of the polymer microspheres. The preferential adsorption of the BSA dimer onto the composite polymer microspheres having heterogeneous surfaces consisting of hydrophilic and hydrophobic parts was more marked than those onto the homopolymer and copolymer microspheres having homogeneous surfaces.     

Localization of carboxyl groups at surface layer of carboxylated polymer emulsion particles by alkali treatment

For the purpose of localizing carboxyl groups from inside to particle surface, styrene — butyl acrylate — methacrylic acid (74.3/17.0/8.7, mol ratio) terpolymer emulsion was kept under pH 9 at different temperatures. The amount of carboxyl groups at the particle surface, As, was remarkably increased by the alkali-treatment above 35 °C. On the other hand, As value of the alkalitreated emulsion was decreased by keeping under ph 3 above 45 °C, although in the case of the original emulsion without the alkalitreatment, it was not changed by the acid-treatment. These results suggest that a part of polymer segments which have ionized carboxyl groups is dragged out at the surface by an increase in the affinity of the groups against water, and the dragged segments turn back into the inside again when the carboxyl groups are deionized.Part 97 of the series Studies on Suspension and Emulsion.     

Displacement processes on hydrophilic/hydrophobic surfaces in methanol-water mixtures

The adsorption from methanol/water and the enthalpy of displacement of methanol by water were studied on K-60 silica gel, on graphitized PRINTEX-80, and onn-alkylammonium vermiculites. The adsorption between the hydrophobized silicate layers was followed by x-ray measurements. The excess isotherms of alkylammonium vermiculites in methanol/water exhibit two maxima corresponding to the two steps of the individual isotherm. The equilibrium constant of the exchange of water by methanol is calculated. For calculating the adsorption capacities and molar adsorption potentials, a new equation is proposed which combines the adsorption excess quantities with free energy and enthalpy functions.     

Competitive adsorption of fibrinogen and albumin onto polymer microspheres having hydrophilic/hydrophobic heterogeneous surface structures

The competitive adsorption of bovine fibrinogen (BFb) and bovine serum albumin onto polymer microspheres from the mixture solution was examined under various protein-to-microsphere ratios using various homopolymer microspheres and poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres having heterogeneous surface structures consisting of both hydrophilic and hydrophobic parts. They were produced by emulsifier-free (seeded) emulsion polymerizations. The selective adsorption of BFb was not observed for the homopolymer microspheres, but observed for the composite polymer microspheres having optimum compositions.Part CXXXVIII on the series Studies on Suspension and Emulsion     

Measurement of interaction forces between crossed quartz glass rods in presence of adsorbed macromolecules

The interaction energy-distance curves of fractionated and unfractionated homo- and copolymers were measured. The results were compared quantitatively with the HVO theory. It was found that only a small number of segments per tail are necessary to obtain stability. The experimental energy-distance curves for low molecular weights are described sufficiently well by the HVO theory, with exponentional distribution of tail sizes. For high molecular weights the exponential distribution cannot be considered as a reasonable assumption because the number of segments in the tails is very low.Polydisperse samples of PVA with different contents of acetate groups, and similar molecular weight, indicate an increasing extension of the adsorbed polymer layer with decreasing acetate content.     

Development of new hydrophilic polymer supports based on dimethylacrylamide

A survey of the development of hydrophilic resins based on dimethylacrylamide (DMA) is presented. It describes the preparation of DMA-based resins by suspension copolymerization of DMA and acrylamide-based crosslinking and functional monomers. Swellability data for a number of DMA-based resins are tabulated, demonstrating that the resins swell to approximately the same extent in dichloromethane as they do in water, methanol, dimethylformamide or dimethylsulphoxide, but they swell only slightly or not at all in tetrahydrofuran. Typical chemical reactions employed for quantitative estimation or derivatization of resin-bound functional groups, including those involving intra-resin crosslinking, are discussed. The development of composite polymer supports, in which the DMA-based polymer is supported on kieselguhr particles or an amphiphilic ion exchange polymer is supported on DMA-based resin beads, is also covered briefly.     

Theory of shear-induced crystallization of polymer melts

In the presented model elements of polymer melt rheology and polymer crystallization kinetics are combined. In particular, the proneness of the melt to the special type of crystallization which is characteristic for shear treatment is supposed to emerge only gradually during shear flow. Following Avrami's early ideas on crystal growth, an induction time is introduced. In principle, the model can be applied to any flow and temperature history. The special case of isothermal flow at constant shear rate is covered in greater detail: A favorable comparison is made with experimental results, as published by Lagasse and Maxwell [10].Dedicated to Prof. J. Meissner on the occasion for his 60th birthday.     

The dispersion of hydrophilic and hydrophobic flame-hydrolysed silicas in short-chained alkanols

The ultrasonic dispersion of Aerosil 200 and some n-alkyl surface-modified derivatives thereof in alkanols have been examined. The sizes of the aggregates formed during this process were investigated from measurements of sol viscosity and quasi-elastic light scattering (QELS). In the former technique, the aggregate volume ratios (AVR) were calculated at very low volume fractions of silica. The AVR values so obtained indicated that the silica monomers were highly aggregated in all systems, as expected. Differences between the various alkanols were found, however. Decreasing continuum polarity from water to hexan-1-ol produced decreasing AVRs. From hexan-1-ol to octan-1-ol, however, the AVRs increased. The n-alkyl surface-modified silicas gave AVRs substantially different to A 200, related most likely to wetting and solvation of the solid surface during dispersion. QELS measurements were subsequently found to be of limited use for these systems, since the aggregate size distributions in these sols were evidently very broad. The results indicated that these size distribution were non-Gaussian. The use of QELS to investigate systems of such high aggregation appears to be limited.     

Preparation of micron-size monodisperse polymer microspheres having cationic groups

Micron-size monodisperse crosslinked polymer microspheres having chloromethyl groups were prepared by seeded copolymerization of styrene, divinylbenzene, and chloromethylstyrene in the presence of 2.1- monodisperse polystyrene seed particles produced by dispersion polymerization. The modification reaction of chloromethyl groups on the surfaces with polyamines such as triethylenetetramine and ethylenediamine was carried out. From the measurements of potential and the amount of chloride ion released, the introduction of a large number of cationic groups at the surfaces was confirmed.Part CXXXI of the series Studies on suspension and Emulsion.     

XPS analysis (ESCA) of the surface composition of poly(styrene/2-hydroxyethyl methacrylate) microspheres produced by emulsifier-free emulsion polymerization

Polymer microspheres composed of various compositions of styrene and 2-hydroxyethyl methacrylate (HEMA) were produced by batch emulsifier-free emulsion polymerization. The HEMA content at the surface, [HEMA] _s , of the microspheres powdered by freeze-drying was determined by both quantitativeC ^1s /O ^1s analysis andC ^1s peak shape analysis of the x-ray photoelectron spectroscopic spectra. When the HEMA content in the microsphere, [HEMA] _p , was less than about 5 mole%, the [HEMA] _s values determined by the two different methods showed good agreement. At [HEMA]_p above 5 mole %, [HEMA]_s values determined by the first method were about 15 mole % greater than those determined by the second. They both showed a similar tendency with the [HEMA] _s being higher than the [HEMA] _p , e.g., when [HEMA] _p was 1 mole %, [HEMA] _s was 11 mole %. The intensity of the satellite peak due to the ^* transition of the benzene ring of the styrene component decreased with an increase in [HEMA] _p , to zero at 5 mole % of [HEMA] _p . These results indicate that the HEMA component is localized at the surface.Part CVIII of the series Studies on Suspension and Emulsion.     

Simulation of a monolayer adsorbed on a heterogeneous surface: effect of the size and shape of the adsorbate on the structure of the interface and the distribution of the adsorption energies

At the low temperature limit, the effect on the size and shape factors of the adsorbate molecule is shown in a simulation of a monomolecular phase adsorbed on a heterogeneous surface. This factor is reflected both in the theoretical distribution of the adsorption energies and the packing of the adsorbed phase.     

Polymeric amphiphiles with hydrophilic main chain spacers: Studies in monolayers and Langmuir-Blodgett multilayers

A methacrylic lipid was polymerized to form an amphiphilic homopolymer and random copolymers with various levels of acrylic acid comonomers. The behavior of these polymeric lipids was investigated in monolayers at the air-water interface and in Langmuir-Blodgett multilayers on polymer foil supports. The acrylic acid acts as a hydrophilic spacer along the polymer backbone, and improves the ability of the polymer to self-organize into highly ordered monolayers and ultimately LB multilayers. It is shown that the quality and stability of the multilayers increase substantially with the increase in comonomer content.     

Protein immobilization on surface modified latices bearing aldehyde groups

A new method for providing polymeric microspheres with aldehyde functional groups capable of covalent reaction with proteins is described. Benzyl halide groups on small molecules, polymeric resins, and the surfaces of surfactant-free poly(styrene-co-chloromethylstyrene) were converted to benzaldehyde groups by oxidation with 2-nitropropane in aqueous sodium methoxide. The modified microspheres containing aldehyde groups can be reacted with protein under milder conditions than the parent microspheres. The activity of a monoclonal antibody, Phe 1.9, was higher when it was immobilized on the aldehyde-containing beads than following immobilization on the parent beads.     

Monte Carlo simulation of a lattice model for ternary polymer mixtures

Monte Carlo studies of symmetrical polymer mixturesAB, modelled by selfavoiding walks withN _A =N _B =N steps on a simple cubic lattice, are presented for arbitrary concentrations of vacancies _v in the range from _v =0.2 to _v =0.8 and chain lengthsN64. We obtained the phase diagrams and the equation of state for three choices of the ratio / _AB ( being the energy between monomers of the same kind, _AB being the energy between different monomers). Flory-Huggins theory provides only a qualitative understanding of these results. If the equation of state is fitted with an effective Flory-Huggins parameter _eff , the latter turns out to be strongly dependent on both concentration and temperature.Contributed paper delivered at the Tagung der Deutschen Physikalischen Gesellschaft, Fachausschuß Polymerphysik, Berlin, March 30–April 3, 1987.     

Gaussian approximation for Hookean dumbbells with hydrodynamic interaction: Translational diffusivity

The recently developed Gaussian approximation for the hydrodynamic interaction is used to discuss the translational diffusivity of polymers in dilute solutions undergoing homogeneous flows. For the Hookean dumbbell model, we derive the diffusion tensors associated with (i) the average polymer velocity caused by external forces; (ii) the mean-square displacement of a single polymer caused by the Brownian forces; and (iii) the polymer mass flux caused by concentration gradients. We discuss the model predictions for these diffusion tensors for steady shear flow in detail.This paper was presented at the Frühjahrstagung des Fachausschusses Polymerphysik der Deutschen Physikalischen Gesellschaft in Hamburg (West Germany), March 14–16,1988.     

Stability of modified surface CaCO3 in the non-polar medium

The adsorption isotherm of methacrylic acid (MAA) and polymethacrylic acid (PMAA) molecules on CaCO₃ were studied. The isotherm of (MAA) adsorption from cyclohexane was found formed from two steps, while that of (PMAA) from ethanol is formed from one step. The effects of surface modification of CaO₃ with (MAA) and (PMAA) in the sedimentation properties in a non-polar medium (cyclohexane) have been studied. It was found that the most stable suspension formed is concerned with monolayer surface coverage for the two adsorptives. Also, studies were made for the rheological properties of concentrated suspension of CaCO₃ modified with (MAA) and (PMAA) in a paraffin oil. The equilibrium flow curves of CaCO₃ modified with (PMAA) suspensions exhibit pseudoplastic characteristics, accompanied by some degree of complex thixotropy, while that modified with (MAA) exerts a thickening effect with rheopexy characteristics.     

Estimation of distribution of vinyl groups in micron-sized monodisperse polymer microspheres by bromine titration method

The distribution of vinyl groups in polystyrene/poly(styrene-divinylbenzene) (PS/P(S-DVB)) composite microspheres produced by seeded copolymerization of S and DVB in the presence of 2.1-m monodisperse PS seed particles was estimated from the amount detected with bromine titration method as a function of the reaction time under various conditions.Part CXXIII of the series Studies on Suspension and Emulsion.     

Preparation of composite fine particles by heterocoagulation

To prepare regular composite particles comprised of organic and inorganic compounds, based on heterocoagulation theory, the properties of the mixture of small amphoteric latices (2a=250 nm) and large spherical silica (2a=240–1590 nm) were investigated as a function of pH, particle number ratio, particle size ratio and electrolyte concentration in the medium. It is apparent that under suitable conditions, we may prepare a stable mixed suspension comprising uniform composite particles, which are made up of many latices regularly adsorbed on silica surfaces, and each composite particle is undergoing Brownian motion as an isolated unit. This new composite particle is very stable for electrolyte, base and acid medium, and its surface charges (sign and magnitude) can be controlled by changing the pH of the medium.     

Rigid-rod polymers with flexible side chains

Modeling studies were performed for a rigid-rod polyester with hexadecyloxy side chains (n=16) in order to simulate x-ray scattering curves in the medium angle scattering region (s=4 sin / from 0.2 Å^–1 to 2.2 Å^=t–1). The experimental ones were taken from a material obtained by cooling to room temeperature from the smectic mesophase at 150°C. The wide-angle x-ray diffractograms were calculated for given conformations and molecular arrangements using Debye's equation. The theoretical result thus obtained for a great variety of possible packing models and structures was compared to the experimental result. The size of the effective scattering region is found to be 61×18×52=6×10⁴ ų and consists of approximately five layers, each of which is composed of two rigid rods and 20 side chains. The planes form by the rigid rods, together with the side chains, have a distance of 3.6 Å, the distance between the rods being 26 Å. As the main result, it was found that the side chains form regions with a denser ordering (clustering). The interchain distance for side chains decreases in the regions from 5.3 Å to 4.8 Å.     

Evaluation of hydrophilic-hydrophobic character of zeolites by measurements of their immersional heats in water

Na-type faujasite was modified by SiCl₄ treatment under dealumination-silicon-exchange reaction. Their crystallinities and lattice constants were analyzed by x-ray diffraction, and their surface areas and pore structures were measured by nitrogen adsorption at 77 K. Their hydrophobic characteristics were evaluated by measurements of water adsorption and heats of immersion into weter, and compared with those of ZSM-5 zeolites which were highly silicious at the synthesis process.Adsorption amount ofn-hexane on modified faujasite did not change compared to that on original faujasite, however, the adsorbed amount of water greatly decreased. Heats of immersion in water decreased by the modification and were closely related with the Si/Al ratio of zeolites. Hydrophilic-hydrophobic character is discussed from the viewpoint of water contact angle.