无金属可见光诱导原子转移自由基聚合法制备聚丙烯酰胺@氧化石墨烯/纳米钯复合物修饰电极及其对乙醇的检测

在金电极表面,用无金属可见光诱导原子转移自由基聚合(MVL ATRP)的方法制备聚丙烯酰胺@氧化石墨烯/纳米钯复合物修饰电极(Au/PAM@GO/Pd)。采用电化学循环伏安法(CV)、交流阻抗法(EIS)、扫描电子显微镜(SEM)、能量色散X射线光谱法(EDS)对Au/PAM@GO/Pd电极进行表征,结果表明在金电极表面成功制备了复合物。利用Au/PAM@GO/Pd电极作为电化学传感器,该传感器能成功地检测溶液中的乙醇。在最佳条件下,利用差分脉冲伏安法(DPV)该传感器检测乙醇的线性范围为1.0×10-8~1.0 mol/L,检出限(S/N=3)为1.3×10-9 mol/L,线性相关系数为0.996。     

基于石墨烯分子印迹电化学传感器测定芦丁

将石墨烯(GR)滴涂至裸Au电极表面,并以邻氨基酚为功能单体,芦丁为模板分子,制备了芦丁分子印迹膜电化学传感器,利用循环伏安法(CV)和差分脉冲伏安法(DPV)对制得的传感器进行了电化学性能研究,并且对制备条件和测定条件进行了优化。结果表明,与裸Au电极相比,该GR修饰的Au电极在[Fe(CN)_6]~(3-/4-)溶液中峰电流明显增大,显著提高了芦丁分子印迹传感器的灵敏度。在最优实验条件下,基于GR分子印迹电化学传感器在4.40×10~(-6)~2.80×10~(-4) mol/L范围内呈良好的线性关系,检测限为1.46×10~(-6) mol/L。用该传感器测定了黑茶中芦丁的含量,获得较好结果。     

基于还原氧化石墨烯-钯复合材料的双酚A分子印迹电化学传感器的研究

采用分子印迹技术,以还原氧化石墨烯-钯复合材料(rGO@Pd)修饰电极为工作电极,双酚A为模板分子,吡咯为聚合单体,成功制备出双酚A分子印迹电化学传感器。采用循环伏安法(CV)、差分脉冲伏安法(DPV)和电化学交流阻抗法(EIS)等,考察了该传感器的电化学性能。利用扫描电子显微镜(SEM)、傅立叶红外光谱(FT-IR)等技术对传感器表面进行结构分析。在最佳实验条件下,该电极的峰电流与双酚A在1.0~10.0 nmol/L浓度范围内呈良好线性关系,相关系数(r)为0.997 7,检出限(S/N=3)为0.1 nmol/L。该电极表现出良好的灵敏度、选择性、重现性和稳定性,已成功应用于自来水中双酚A含量的测定,加标回收率为92.1%~108.0%。     

CuNi/β-环糊精/还原氧化石墨烯修饰电极电化学检测多巴胺

建立了一种循环伏安法制备CuNi/β-环糊精/还原氧化石墨烯修饰玻碳电极(CuNi/β-CD/ERGO/GCE)的方法。通过多巴胺在该修饰电极上的电化学行为发现,该电化学传感器实现了快速、灵敏的测定多巴胺。该传感器用差分脉冲伏安法(DPV)测定多巴胺时,其电化学响应电流与多巴胺浓度在0.01~20μmol/L之间呈线性关系,检测限为8 nmol/L。该传感器用于尿液样品中的多巴胺检测,回收率在95.6%~107.2%之间。     

基于取代型多酸复合材料的多巴胺电化学检测

本文构建了基于取代型多酸与还原氧化石墨烯（RGO）复合材料的多巴胺电化学传感器. 首先,通过水热法合成了十一钨镍杂多钨硅酸盐K₂H₂SiW₁₁NiO₃₉·xH₂O（SiW₁₁Ni）,利用Hummers法与化学还原法合成了还原氧化石墨烯. 并使用SEM、XRD与FTIR等测试方法对材料进行了表征. 将SiW₁₁Ni与RGO按照一定的比例滴涂在玻碳电极表面,以便成功构建出传感界面（SiW₁₁Ni-RGO/GCE）. 然后,采用电化学阻抗法与循环伏安法等方法研究了传感界面的电化学性质. 优化实验条件后,利用该传感器通过循环伏安法对多巴胺进行定量检测,并且氧化过程展现出较为良好的性能. 其检出限为3.2 μmol·L ^-1（S/N = 3）,灵敏度为9.71 μA·(μmol·L ^-1·cm ^-2) ^-1,线性范围为10 ~ 80 μmol·L ^-1. 同时,所制备的传感器表现出良好的稳定性与抗干扰能力. 该传感器修饰过程简单、成本低、电化学性能良好,为多酸在化学传感领域的应用提供新思路.     

基于细胞色素C双通道比率型过氧化氢生物传感器测定过氧化氢

制备细胞色素C/巯基丙酸修饰电极(Cyt.C/MPA/Au)和六-(二茂铁)-己硫醇修饰电极(FcHT/Au),采用循环伏安法研究了Cyt.C/MPA/Au电极和FcHT/Au电极的电化学行为。结果表明,在pH 7.0的磷酸盐缓冲溶液中,过氧化氢在Cyt.C/MPA/Au电极的还原峰电流随其含量的增加不断增大,而在FcHT/Au电极上的参比峰电流基本不变,构建了一种双通道比率型过氧化氢生物传感器。采用差分脉冲伏安法测定过氧化氢的含量,过氧化氢在Cyt.C/MPA/Au电极上的还原峰电流与FcHT/Au电极上的参比峰电流比值,与其浓度在20.0～100.0μmol·L~(-1)内呈线性关系,检出限(3S/N)为1.19μmol·L~(-1),方法的回收率在71.4%～79.2%之间。     

纳米金/聚多巴胺-还原氧化石墨烯复合膜修饰传感器的构建及对百草枯测定研究

实验利用氧化石墨烯和多巴胺分子制备了聚多巴胺-还原氧化石墨烯(PDA-rGO)复合膜,建立了高灵敏的纳米金/聚多巴胺-还原氧化石墨烯复合膜传感器(Au/PDA-rGO/GCE),用于检测百草枯并利用差分脉冲伏安法(DPV)和循环伏安法(CV)研究了百草枯在传感器上的电化学行为。首先,通过在碱性溶液中多巴胺的聚合反应来还原氧化石墨烯,以获得聚多巴胺改性的还原氧化石墨烯。其次,在电极表面滴涂10μL的聚多巴胺-还原氧化石墨烯悬浮液,在此基础上固定纳米金(GNPs)。结果表明,该传感器对百草枯有良好的电化学催化作用。实验优化了聚多巴胺-还原氧化石墨烯的制备条件和电极修饰条件。百草枯的还原峰电流在8.0×10^-8～3.0×10^-5 mol·L^-1范围内线性关系良好,检出限为2.2×10^-8 mol·L^-1。该修饰电极用于实际水和土壤样品中百草枯的测定,结果令人满意。     

二茂铁巯基化合物/金纳米粒子/还原石墨烯修饰电化学传感器检测Cu~(2+)

通过Hummer法进一步还原合成还原石墨烯(RGO),Shifft碱反应合成新型二茂铁巯基化合物(FcSH)。利用还原石墨烯吸附性将石墨烯修饰在玻碳电极(GCE)上,在石墨烯表面电沉积金纳米粒子(AuNPs),通过自组装制备还原石墨烯和二茂铁巯基修饰电化学传感器(FcSH/AuNPs/RGO/GCE),该电化学传感器具有大的比表面积和富电子性能。实验显示,在0.01 mol/L HCl中,富集时间为180s,Cu~(2+)浓度在1.0×10~(-12)~1.0×10~(-11)mol/L与1.0×10~(-11)~1.0×10~(-10)mol/L范围内与方波伏安峰电流分别呈现良好的线性关系,检出限为0.94×10~(-12)mol/L。该电化学传感器对Cu~(2+)的检测表现出较好的选择性、高的稳定性和灵敏性,可用于环境中痕量Cu~(2+)的测定。     

石墨烯修饰电化学适配体传感器测定双酚A

构建了一种检测双酚A(BPA)的电化学适配体传感器。利用在线电化学方法将氧化石墨烯还原为石墨烯,通过石墨烯与单链DNA之间的相互作用,将BPA适配体单链DNA吸附固定在修饰电极上,制备了BPA电化学适配体传感器。以铁氰化钾-亚铁氰化钾平衡电对为电化学探针,利用电化学循环伏安法和差分脉冲伏安法对BPA传感器的性能进行了研究。结果表明,在最优化实验条件下,传感器对BPA的检测线性范围在1.0×10~(-15)~1.0×10~(-10)mol/L之间,检出限为3.3×10~(-16)mol/L(S/N=3)。     

基于HDT自组装金纳米粒子修饰电极的微囊藻毒素-LR电化学免疫传感器研究

构建了一种新型的基于金纳米粒子(Au NPs)修饰金电极的微囊藻毒素-亮氨酸-精氨酸(MCLR)电化学免疫传感器。采用柠檬酸钠还原法制备了Au NPs溶胶,分别用透射电子显微镜和紫外-可见吸收光谱对其进行表征。将Au NPs组装到1,6-己二硫醇(HDT)自组装单分子层修饰的金电极表面,再将MCLR抗体(anti-MCLR)固定于该修饰电极上,利用扫描探针显微镜法、循环伏安法和电化学交流阻抗法(EIS)表征了自制化学修饰电极表面的形貌特征和电化学免疫传感器的电化学特征。通过辣根过氧化物酶标记的MCLR(MCLR-HRP)与MCLR竞争结合抗体,建立了检测MCLR的差分脉冲伏安法(DPV)。在最佳实验条件下,用DPV对MCLR检测的线性范围为0.01~25μg/L,检出限为0.005μg/L。对构建的免疫传感器的重现性、稳定性和选择性进行了考察。该方法对实际水样中MCLR的加标回收率为100%~102%,测定结果与高效液相色谱法的测定结果一致。     

利用手持技术改进测定乙醇分子结构实验

利用压强传感器代替排水集气法,改进测定乙醇分子结构实验的仪器装置,并探索最佳反应条件。另外,设计两个空白实验,结合压强变化曲线对实验误差进行相关讨论。     

光谱仪测试范围的扩展

由于石化行业的生产需要，其材质的使用具有多样性和广泛性，经常会出现顾客委托的测试样品的一个或几个元素跨越光谱仪现有测试程序测量范围的情况。本法通过对光谱仪测试原理的认识，根据光谱仪的测试能力及标样的采集，实现了一个或几个元素测量范围的扩展，并对其测量的影响因素进行了研究。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Influence of viscosity of medium on processes of oxygen quenching of excited states of mesoporphyrin

The oxygen quenching rate constants for singlet and triplet excited states of the dimethyl ester of mesoporphyrin IX increase with decreasing viscosity of the medium and reach a maximum at a viscosity of approximately 0.4 mPa·sec, after which the rate constants begin to decrease. The drop in rate constant with increasing fluidity of the medium may be related to a nonequilibrium character of the elementary act in the interaction of the reactants in the solvent cage. In viscous media such as isopropyl alcohol, isobutyl alcohol, and isoamyl alcohol, the reaction radius is greater than the sum of the radii of the reacting particles. The long-range character of these processes is due to the relatively weak dependence of the quenching probability on distance.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 2, pp. 161–167, March–April, 1989.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

物质分配系数的测定实验改进

实验教学目的是从解决实际问题出发,以实验技术训练和实验设计思想培养为目标。介绍了将单一的物质分配系数测定实验改进为综合实验,提高了实验效果及实验资源利用率。     

Neutral diterpenoids of oleoresins of five species of conifers of Transcarpathia

The compositions of the neutral diterpenoids of the oleoresins of five species of conifers growing in the Transcarpathia have been studied. It has been found that the oleoresins ofAbies alba M.,Larix decidua M., andPicea excelsa L. contain more than 50% of neutral diterpenoids. The group and qualitative compositions of the oxygen-containing diterpenoids have been determined. In the oleoresins ofAbies alba,Picea excelsa, andPicea abies tertiary alcohols — cis-abienol and isocembrol — predominate, while inLarix decidua the main component is the hydroxy ester larixyl acetate. Primary alcohols related to the resin acids have been found in all the oleoresins investigated. Features of the distribution of diterpenoids according to the species of conifers have been revealed. The results obtained are necessary for the chemotaxonomy of conifers of the family Pinceae.Novosibirsk Institute of Organic Chemistry, Siberian Branch, Academy of Sciences of the USSR. Translated from Khimiya Prirodynkh Soedinenii, No. 6, pp. 812–816, November–December, 1988.     

Calculation of enthalpies of hydrogenation of hydrocarbons

Sets of hydrogen molecule equivalents have been developed which permit the calculation of hydrogenation of different types of carbon-carbon bonds from ab initio total energies (3-21G and 6-31G* basis sets, and, to a more limited extent, for MP2/6-31G* data) of reactants and products. The calculated enthalpies of hydrogenation are in good agreement with experiment for unstrained molecules, with average errors on the order of 2 kcal/mol. The 6-31G* equivalents allow the enthalpies for strained molecules to be calculated accurately, but the 3-21G equivalents do not. The equivalents for both basis sets have been tested by calculating the enthalpies of hydrogenation of carbon-carbon bonds in nitrogen- and oxygen-containing organic molecules, free radicals, and classical carbocations. The results are in good agreement with experiment in most cases.