Robust isocratic liquid chromatographic separation of functional poly(methyl methacrylate)

The separation of telechelic poly(methyl methacrylate) (PMMA) prepolymers based on the number of end-groups under critical liquid chromatography (LC) conditions has been studied using a bare-silica column, which can interact with polar functional groups. The critical solvent compositions for non-functional, mono-functional and bi-functional PMMAs were determined in normal-phase LC using mixtures of acetonitrile and dichloromethane (DCM) of varying composition as the mobile phase. The telechelic prepolymers were successfully separated according to hydroxyl (OH) functionality (with zero, one, or two OH groups, respectively) under the critical conditions, in which fast (5 min), base-line separations were obtained independent of molecular weight. Changing the column temperature, flow rate, and mobile-phase composition within a certain range did not affect the functionality separation. Therefore this isocratic LC separation method is quite robust. Evaporative light-scattering detector (ELSD) calibration curves were used for the quantitative analysis of functional PMMA prepolymers.     

Synthesis and characterization of telechelic polymethacrylates via RAFT polymerization

The reversible addition–fragmentation chain transfer (RAFT) polymerization technique has been employed to synthesize linear α,ω ‐telechelic polymers with either hydroxyl or carboxyl end groups. Methyl methacrylate, butyl methacrylate, and butyl acrylate were polymerized with RAFT polymerization. The polymerizations exhibited the usual characteristics of living processes. Telechelic polymethacrylates were obtained from a hydroxyl monofunctional RAFT polymer with a two‐step chain‐end modification procedure of the dithioester end group. The procedure consisted of an aminolysis followed by a Michael addition on the resulting thiol. The different steps of the procedure were followed by detailed analysis. It was found that this route was always accompanied by side reactions, resulting in disulfides and hydrogen‐terminated polymer chains as side products next to the hydroxyl‐terminated telechelic polymers. Telechelic poly(butyl acrylates) with carboxyl end groups were produced in a single step procedure with difunctional trithiocarbonates as RAFT agents. The high yield in terms of end group functionality was confirmed by a new critical‐liquid‐chromatography method, in which the polymers were separated based on acid‐functionality and by mass spectrometry analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 959–973, 2005     

Quantitation of functionality of poly(methyl methacrylate) by liquid chromatography under critical conditions followed by evaporative light-scattering detection. Comparison with NMR and titration

Atom transfer radical polymerisation (ATRP) is a versatile 'living' controlled polymerisation technique for the synthesis of well-defined architectures such as block copolymers, gradient copolymers, hyperbranched polymers and telechelic polymers. ATRP provides control over molecular mass and molecular mass distribution and is suitable for the polymerisation of a wide variety of monomers, including methyl methacrylate. A chromatographic method was developed for an endgroup-based separation of low-molecular-mass poly(methyl methacrylate) (PMMA), based on liquid chromatography under critical conditions. With this method the PMMA, irrespective of its low-molecular-mass, is separated according to endgroups (functionality) due to interactions of the polar endgroups with the non-modified silica based stationary phase. The different series were identified using on-line atmospheric pressure ionisation electrospray mass spectrometry and quantified by evaporative light scattering detection. These results were compared with those obtained by NMR and titration.     

Characterization of glycerin-based polyols by capillary electrophoresis

Methods based on capillary electrophoresis (CE) have been developed to obtain the molar mass distribution (MMD) of glycerin-based polyols and details on the presence of mono- and difunctional byproducts in technical samples. Prior to the analyses the hydroxy end-groups of the trifunctional polyols were converted to chargeable and UV-active moieties with phthalic anhydride (PhAH) as the derivatization reagent. With a method of capillary zone electrophoresis (CZE) samples of glycerin-based polyols with average molar masses up to 6000 were separated according to their charge-to-size ratio. The separations were carried out with a buffer solution containing 50% (v/v) acetonitrile and 10 mM sodium tetraborate, and for detection UV absorption at 220 nm was measured. An approximately linear relation between the reciprocal of the effective mobilities and the degree of polymerisation of the glycerin-based polyols was found. Therefore, the proposed CZE system could be used to determine the degree of polymerisation and polydispersity of technical glycerin-based polyol samples. The effect of the presence of sodium dodecyl sulfate (SDS) in the buffer solution on the CE separation of linear polyethylene glycols (PEGs), polypropylene glycols (PPGs) and ethylene oxide-propylene oxide (EO-PO) copolymers with different molar masses was investigated. The interaction between the charged polymer derivatives and SDS ions in solution increased strongly with the degree of polymerisation and the amount PO in the chain of the polymeric compounds. This behaviour made it possible to invert the migration order of EO-PO containing polymers of different size. With a background electrolyte (BGE) composition of 10mM SDS and 25% (v/v) acetonitrile in borate buffer mono- and difunctional byproducts were separated from the main glycerin-based polyols based on their number of end-groups. Accurate quantities for the mono- and difunctional impurities in technical glycerin-based polyol products were determined.     

Functional Polymers by Cationic Techniques

Extensive studies on the mechanism of carbocationic polymerization initiation and particularly termination yielded information useful for the synthesis of a variety of new mono- and difunctional (telechelic) polymers. Unraveling aspects of initiation has opened new avenues toward the synthesis of novel cationic graft copolymers. Understanding details of termination has led among other products to cyclopentadiene-ended polyisobutylene and cyclopentadienylated rubbers. The latters crosslink by Diels-Alder addition and produce thermally reversible networks. Combination of controlled initiation and termination yielded telechelic products e. g., α, ω-diene-polyisobutylene. The use of Cl₂/BCl₃ combinations led to the synthesis of α, ω-dichloropolyisobutylenes.     

Halato-telechelic polymers. XV. Ionic cross-interactions of immiscible telechelic polymers: A reversible pathway to block copolymer-type materials

Phase separation of two immiscible polymer blends can be controlled by ionic cross-interactions of the end-groups as promoted by proton transfer from acid end-groups of polymer PA to aliphatic tert-amine end-groups of PB. IR spectroscopy supports the occurrence of proton transfer with formation of ammonium carboxylate ion pairs that influences the solution behavior of the blends. Optical microscopy illustrates the opportunity to get finely dispersed blends at a scale of ca. 0.2 μm depending on nature, molecular weight, and functionality of the immiscible polymers and strength of the ion pairs. T_g measurements are in agreement with the general pattern reported for multiphase block polymers, and give consistency to an analogy between finely phase separated blends of acid and tert-amine telechelic polymers and related block polymers.     

Well-defined liquid crystal gels from telechelic polymers

Well-defined liquid crystal networks with controlled molecular weight between cross-links and cross-link functionality were prepared by "click" cross-linking of telechelic polymers produced by ring-opening metathesis polymerization (ROMP). The networks readily swell in a small molecule liquid crystal, 5CB, to form LC gels with high swelling ratios. These gels exhibit fast, reversible, and low-threshold optic switching under applied electric fields when they are unconstrained between electrodes. For a given electric field, the LC gels prepared from shorter telechelic polymers showed a reduced degree of switching than their counterparts made from longer polymer strands. The reported approach provides control over important parameters for LC networks, such as the length of the network strands between cross-links, cross-linker functionality, and mesogen density. Therefore, it allows a detailed study of relationships between molecular structure and macroscopic properties of these scientifically and technologically interesting networks.     

Functionalization of living polymers – results and problems

In spite of intensive research, work during the last 20–30 years, even today, the reaction products of living polymers are produced only in small quantities on industrial scale. The expected production of tyres from telechelic polymers was not reached, The difficulty is that the functionalization of living polymers does not result in only one type of functionalized polymer chain but always in a mixture of non-, mono-, di- and polyfunctionalized compounds. During the last years different technologies for functionalizing living polymers were developed in Buna. The results of these investigations are discussed. Likewise, we show that the functionalized living polymers of ∝-methylstyrene are of great interest for different industrial uses. A complete technological scheme for the production of telechelic polymers has been developed, which is attached herewith.     

高效液相色谱表征高聚物*

最常用的测试高聚物的分子量和分子量分布的体积排除色谱(SEC)是高效液相色谱 (HPLC)的一个重要分支,HPLC的另一个重要分支是相互作用液相色谱, 它是20世纪90年代开始用于高分子分离和表征的研究领域。相互作用液相色谱可以根据高分子的化学结构（如共混物组成、共聚物组成、端基）来分离,它比SEC 有更高的分离效率。本文介绍了高聚物液相色谱的分离模式,并就高聚物体积排除色谱、相互作用液相色谱、临界液相色谱和全二维液相色谱用于分离和表征高聚物的研究进展进行了较系统的综述,并对该技术目前存在的问题和今后可能的发展前景进行了探讨。     

Synthesis of Aminotelechelic Polymers with the Redox System TiCl3/NH2OH in the Hydrochloric Aqueous Phase. I. Polymerization Possibilities and Limits

Among recent progress in the field of macromolecular chemistry, of considerable interest has been the synthesis of α, ω-ordifunctional polymers. These polymers, called “telechelic” polymers, are interesting because many reactions are possible on their functional end-groups:     

Polycondensation of mono- and difunctional derivatives of p-xylene

A new method for the production of polydimethylbenzylenes,$ \rlap{--} [{\rm C}_6 {\rm H}_4 ({\rm CH})_2 {\rm CH}_{\rm 2} \rlap{--} ]_n $, involves the polycondensation of the mono- and dichloromethyl and mono- and diacetoxymethyl derivatives of p-xylene via an acid-catalyzed reaction in anhydrous acetic acid. The reaction of the difunctional derivatives is slower than the reaction of the monofunctional ones, leading to linear, predominantly crystalline, high-melting polymers with molecular weights of 2000–3000. Polycondensation of both monomers under different feed ratios leads to polymers with the same structure, and the monofunctional monomers condense with themselves more favorably than with the difunctional ones. Thus a head-to-head structure is preferred, and crystalline polymers of high structural purity are obtained.     

Critical Conditions and Limiting Conditions in Liquid Chromatography of Synthetic Polymers

Distinctions between liquid chromatography of synthetic polymers under critical conditions (LC CC) and liquid chromatography under limiting conditions (LC LC) are elucidated. Surface adsorption retention mechanism of macromolecules is employed in the chromatographic systems composed of 10 and 30 nm pore diameter bare silica gels, poly (methyl methacrylate)s of different molar masses, and mixed eluents acetonitrile/dichloromethane of different compositions, and at different temperatures. Increased robustness of the LC LC methods compared to LC CC is confirmed: the LC LC elution behavior is much less sensitive to eluent composition changes compared to LC CC. Still, the LC CC system under study is, surprisingly robust in terms of temperature variations. LC LC methods produce narrow, focused polymer peaks while a peak broadening is observed in LC CC. The results demonstrate importance of sample solvent applied in the isocratic coupled polymer HPLC methods.     

Thermoresponsive star-shaped poly(2-isopropyl-2-oxazolines) based on octa-tert-butylcalix[8]arene

Star-shaped polymers with a central calixarene core and oligo(N-isobutyroylethyleneimine) arms are synthesized with the use of cationic polymerization. The effects of the structure of the initiator, the initiator concentration, and the solvent nature on the structure and molecular-mass characteristics of the polymers are studied. It is shown that the polymers form complexes with low-molecular-mass organic compounds and feature lower critical solution temperatures.     

Tailor-made polymers and copolymers from aziridines and 1,3-oxacyclanes

Telechelic poly(tert-butylaziridine)s (polyTBA) and poly(1,3,6-trioxocane)s (polyTOC) and macromonomers were synthesized mainly by living cationic polymerization. Both, molecular weight and end-functionality distributions of polyTOC oligomers and polymers were studied using a combination of HPLC under “critical conditions”, gradient HPLC and SEC with double detection following a preparative HPLC fractionation. Monofunctional and bifunctional polyTBA with various end-groups were synthesized by the end-capping method. Several modification reactions were examined for terminal transformation of polyTBA and polyTOC hydroxy-telechelics into mono- and bifunctional vinyl ether macromonomers. Various tailor-made polymers based on uniform size telechelics and macromonomers were prepared using: 1. polymer-polymer coupling to produce block copolymers; 2. polyaddition of amino-functionalized telechelics to bisacrylamides; 3. addition of amino-polyTBA to polydienes; 4. synthesis of graft copolymers with well-defined graft component and networks.     

双端正离子活性链的研究——四氢呋喃与环氧丙烷共聚合及其遥爪齐聚物的合成

<正> 关于四氢呋喃(THF)活性聚合的研究文献上已有较多报道,而对共聚合的“活”性行为则研究甚少。THF与环氧丙烷(PO)共聚合时副反应较多,如生成环聚体、异构化等。这是否影响链的“活”性,是饶有兴趣的问题。特别是THF均聚醚在分子     

Quantitative determination of the main aliphatic carboxylic acids in wood kraft black liquors by high-performance liquid chromatography-mass spectrometry

The versatile characterization of organic material and especially of the significant aliphatic hydroxy acids in black liquor is of great importance, for example, in monitoring the progress of the kraft pulping process. This paper describes a simple high-performance liquid chromatographic separation method with atmospheric-pressure chemical ionization mass spectrometry (HPLC-APCI-MS) which was developed for the rapid quantitative analysis of these acids, mainly formed as the alkaline degradation products of feedstock carbohydrates. The fraction of carbohydrate degradation products is mainly composed of hydroxy monocarboxylic and volatile acids (formic and acetic acids) along with lesser amounts of various dicarboxylic acids. This method was thoroughly tested and validated to determine the most abundant nonvolatile low-molecular-mass aliphatic mono- and dicarboxylic acids present in softwood (pine and spruce) and hardwood (birch and aspen) kraft black liquors. This straightforward technique provides, compared to the conventional gas chromatographic methods, some important advantages such as simple sample preparation and a faster analysis time, thus enabling almost real-time monitoring of these acids.     

氨基甲酸酯乙烯基醚类化合物光聚合性能研究

本文合成了一种双官能度的氨基甲酸酯乙烯基醚和一种三官能度的氨基甲酸酯乙烯基醚,并用实时傅立叶红外光谱分别监测了单官能度、双官能度和三官能度的乙烯基醚化合物在三芳基六氟锑酸锍鎓盐阳离子光引发剂(PAG-201)引发下的光聚合情况,对其光聚合动力学性能进行了比较,研究了引发剂PAG-201的浓度对双官能度单体光聚合的影响.结果表明,随着官能度的增加,乙烯基醚化合物的转化率和聚合速率降低.此外,对它们的聚合产物进行的热失重分析表明,随着官能度的增加,聚合产物的热稳定性增加.本文的结果对于研究开发基于氨基甲酸酯乙烯基醚单体的阳离子聚合体系具有较好的指导意义.     

Theory of liquid chromatography of mono- and difunctional macromolecules. I. Studies in the critical interaction mode

The theory of liquid chromatography of mono- and difunctional polymers based on the model of ideal polymer chain in wide slit-like pores is presented. Analytical equations describing chromatographic behavior of functional macromolecules in both adsorption, exclusion and critical modes are derived and compared with experiments. The focus of this experimental study was on the verification of the theory in chromatography at critical conditions. Chromatographic behavior of low molar mass end-functionalized polyethylene glycols was found to be in a very good qualitative and in a reasonable quantitative agreement with the theory.     

Exploration of a ternary deep eutectic solvent of methyltriphenylphosphonium bromide/chalcone/formic acid for the selective recognition of rutin and quercetin in Herba Artemisiae Scopariae

Methyltriphenylphosphonium bromide/chalcone/formic acid, a green ternary deep eutectic solvent, was applied as a functional monomer and dummy template simultaneously in the synthesis of a new molecularly imprinted polymer. Ternary deep eutectic solvent based molecularly imprinted polymers are used as a solid‐phase extraction sorbent in the separation and purification of rutin and quercetin from Herba Artemisiae Scopariae combined with high‐performance liquid chromatography. Fourier transform infrared spectroscopy and field‐emission scanning electron microscopy were applied to characterize the deep eutectic solvent based molecularly imprinted polymers synthesized using different molar ratios of chalcone. The static and competitive adsorption tests were performed to examine the recognition ability of the molecularly imprinted polymers to rutin and quercetin. The ternary deep eutectic solvent consisting of formic acid/chalcone/methyltriphenylphosphonium bromide (1:0.05:0.5) had the best molecular recognition effect. After optimization of the washing solvents (methanol/water, 1:9) and eluting solvents (acetonitrile/acetic acid, 9:1), a reliable analytical method was developed for strong recognition towards rutin and quercetin in Herba Artemisiae Scopariae with satisfactory extraction recoveries (rutin: 92.48%, quercetin: 94.23%). Overall, the chalcone ternary deep eutectic solvent‐based molecularly imprinted polymer coupled with solid‐phase extraction is an effective method for the selective purification of multiple bioactive compounds in complex samples.     

Versatile Production of Multivariate,Hyperdimensional End Group and Main Chain Functionalized Polyolefins

The (stereoselective) living coordinative copolymerization of 1-alkenes with 4-aryl-1,6-heptadienes, in both the absence and presence of multiple equivalents of a reversible chain transfer agent, is established as a highly versatile strategy for production of multivariate hyperdimensional functionalized semi-crystalline or amorphous polyolefins that optionally possess either mono- or difunctionalized (telechelic) end-groups in combination with a programmable level of incorporation of orthogonal functional groups within the main-chain. The non-conjugated diene comonomers are readily obtained from a diverse range of aryl carboxaldehyde precursors through a one-step bis-allylation process. These results serve to provide a new platform for exploring the science and technology of a vast new landscape of functionalized classes of polyolefins that are now accessible in practical and scalable quantities.