Contact-impact formulation for multi-body systems using component mode synthesis

The efficiency and accuracy are two most concerned issues in the modeling and simulation of multi-body systems involving contact and impact. This paper proposed a formulation based on the component mode synthesis method for planar contact problems of flexible multi-body systems. A flexible body is divided into two parts： a contact zone and an un-contact zone. For the un-contact zone, by using the fixed-interface substructure method as reference, a few low-order modal coordinates are used to replace the nodal coordinates of the nodes, and meanwhile, the nodal coordinates of the local impact region are kept unchanged, therefore the total degrees of freedom （DOFs） are greatly cut down and the computational cost of the simulation is significantly reduced. By using additional constraint method, the impact constraint equations and kinematic constraint equations are derived, and the Lagrange equations of the first kind of flexible multi-body system are obtained. The impact of an elastic beam with a fixed half disk is simulated to verify the efficiency and accuracy of this method.     

Implicit and explicit integration in the solution of the absolute nodal coordinate differential/algebraic equations

This investigation is concerned with the use of an implicit integration method with adjustable numerical damping properties in the simulation of flexible multibody systems. The flexible bodies in the system are modeled using the finite element absolute nodal coordinate formulation (ANCF), which can be used in the simulation of large deformations and rotations of flexible bodies. This formulation, when used with the general continuum mechanics theory, leads to displacement modes, such as Poisson modes, that couple the cross section deformations, and bending and extension of structural elements such as beams. While these modes can be significant in the case of large deformations, and they have no significant effect on the CPU time for very flexible bodies; in the case of thin and stiff structures, the ANCF coupled deformation modes can be associated with very high frequencies that can be a source of numerical problems when explicit integration methods are used. The implicit integration method used in this investigation is the Hilber–Hughes–Taylor method applied in the context of Index 3 differential-algebraic equations (HHT-I3). The results obtained using this integration method are compared with the results obtained using an explicit Adams-predictor-corrector method, which has no adjustable numerical damping. Numerical examples that include bodies with different degrees of flexibility are solved in order to examine the performance of the HHT-I3 implicit integration method when the finite element absolute nodal coordinate formulation is used. The results obtained in this study show that for very flexible structures there is no significant difference in accuracy and CPU time between the solutions obtained using the implicit and explicit integrators. As the stiffness increases, the effect of some ANCF coupled deformation modes becomes more significant, leading to a stiff system of equations. The resulting high frequencies are filtered out when the HHT-I3 integrator is used due to its numerical damping properties. The results of this study also show that the CPU time associated with the HHT-I3 integrator does not change significantly when the stiffness of the bodies increases, while in the case of the explicit Adams method the CPU time increases exponentially. The fundamental differences between the solution procedures used with the implicit and explicit integrations are also discussed in this paper.     

DYNAMIC ANALYSIS OF A SPATIAL COUPLED TIMOSHENKO ROTATING SHAFT WITH LARGE DISPLACEMENTS

ＩｎｔｒｏｄｕｃｔｉｏｎＲｏｔａｔｉｎｇｓｈａｆｔｓａｒｅｔｈｅｍｏｓｔｖｉｔａｌｃｏｍｐｏｎｅｎｔｓｏｆｍｏｄｅｒｎｉｎｄｕｓｔｒｉａｌａｎｄｐｏｗｅｒｇｅｎｅｒａｔｉｏｎｆａｃｉｌｉｔｉｅｓ.ＤｕｅｔｏｔｈｅｉｍｐｏｒｔａｎｃｅｏｆｔｈｅｓｅｃｏｍｐｏｎｅｎｔｓｔｈｅｒｅｗｅｒｅｗｉｄｅｌｙｓｔｕｄｉｅｓｏｎｔｈｅｖｉｂｒａｔｉｏｎｂｅｈａｖｉｏｒｏｆＥｕｌｅｒ＿Ｂｅｒｎｏｕｌｌｉｒｏｔａｔｉｎｇｓｈａｆｔｓｕｓｉｎｇａｎａｌｙｔｉｃａｌａｎｄｎｕｍｅｒｉｃａｌｍｅｔｈｏｄｓ[1- 4 ].Ｈｏｗｅ…     

Effect of the order of the finite element and selection of the constrained modes in deformable body dynamics

Finite elements with different orders can be used in the analysis of constrained deformable bodies that undergo large rigid body displacements. The constrained mode shapes resulting from the use of finite elements with different orders differ in the way the stiffness of the body bending and extension are defined. The constrained modes also depend on the selection of the boundary conditions. Using the same type of finite element, different sets of boundary conditions lead to different sets of constrained modes. In this investigation, the effect of the order of the element as well as the selection of the constrained mode shapes is examined numerically. To this end, the constant strain three node triangular element and the quadratic six node triangular element are used. The results obtained using the three node triangular element are compared with the higher order six node triangular element. The equations of motion for the three and six node triangular elements are formulated from assumed linear and quadratic displacement fields, respectively. Both assumed displacement fields can describe large rigid body translational and rotational displacements. Consequently, the dynamic formulation presented in this investigation can also be used in the large deformation analysis. Using the finite element displacement field, the mass, stiffness, and inertia invariants of the three and six-node triangular elements are formulated. Standard finite element assembly techniques are used to formulate the differential equations of motion for mechanical systems consisting of interconnected deformable bodies. Using a multibody four bar mechanism, numerical results of the different elements and their respective performance are presented. These results indicate that the three node triangular element does not perform well in bending modes of deformation.     

Control structure interaction in the nonlinear analysis of flexible mechanical systems

The effect of the control structure interaction on the feedforward control law as well as the dynamics of flexible mechanical systems is examined in this investigation. An inverse dynamics procedure is developed for the analysis of the dynamic motion of interconnected rigid and flexible bodies. This method is used to examine the effect of the elastic deformation on the driving forces in flexible mechanical systems. The driving forces are expressed in terms of the specified motion trajectories and the deformations of the elastic members. The system equations of motion are formulated using Lagrange's equation. A finite element discretization of the flexible bodies is used to define the deformation degrees of freedom. The algebraic constraint equations that describe the motion trajectories and joint constraints between adjacent bodies are adjoined to the system differential equations of motion using the vector of Lagrange multipliers. A unique displacement field is then identified by imposing an appropriate set of reference conditions. The effect of the nonlinear centrifugal and Coriolis forces that depend on the body displacements and velocities are taken into consideration. A direct numerical integration method coupled with a Newton-Raphson algorithm is used to solve the resulting nonlinear differential and algebraic equations of motion. The formulation obtained for the flexible mechanical system is compared with the rigid body dynamic formulation. The effect of the sampling time, number of vibration modes, the viscous damping, and the selection of the constrained modes are examined. The results presented in this numerical study demonstrate that the use of the driving forees obtained using the rigid body analysis can lead to a significant error when these forces are used as the feedforward control law for the flexible mechanical system. The analysis presented in this investigation differs significantly from previously published work in many ways. It includes the effect of the structural flexibility on the centrifugal and Coriolis forces, it accounts for all inertia nonlinearities resulting from the coupling between the rigid body and elastic displacements, it uses a precise definition of the equipollent systems of forces in flexible body dynamics, it demonstrates the use of general purpose multibody computer codes in the feedforward control of flexible mechanical systems, and it demonstrates numerically the effect of the selected set of constrained modes on the feedforward control law.     

Geometric nonlinear dynamic analysis of curved beams using curved beam element

Instead of using the previous straight beam element to approximate the curved beam,in this paper,a curvilinear coordinate is employed to describe the deformations,and a new curved beam element is proposed to model the curved beam.Based on exact nonlinear strain-displacement relation,virtual work principle is used to derive dynamic equations for a rotating curved beam,with the effects of axial extensibility,shear deformation and rotary inertia taken into account.The constant matrices are solved numerically utilizing the Gauss quadrature integration method.Newmark and Newton-Raphson iteration methods are adopted to solve the differential equations of the rigid-flexible coupling system.The present results are compared with those obtained by commercial programs to validate the present finite method.In order to further illustrate the convergence and efficiency characteristics of the present modeling and computation formulation,comparison of the results of the present formulation with those of the ADAMS software are made.Furthermore,the present results obtained from linear formulation are compared with those from nonlinear formulation,and the special dynamic characteristics of the curved beam are concluded by comparison with those of the straight beam.     

Comparison of Results in Flexible Multibody Dynamics Using Various Approaches

Throughout the past decades a considerable amount of work has been dedicated to the development and application of formalisms to simulate flexible bodies in a multibody system (MBS). The two most common approaches to describe the deformation of a flexible body with respect to their floating frame of reference are to apply the linear finite-element formulation and the linearmodal approach using global mode shapes.On the field of flexible body modelling, this paper discusses two topics: (a) the consideration of quadratic terms in the equations of deformation and (b) the presentation of methods for global mode preparation to reduce the computer time for dynamic simulations without loss of accuracy regarding deformations.The proposed methods are applied in two examples, for the deformation of a stabilisation linkage of a car's front suspension and for the simulation of the deployment of a flexible solar array.     

A Variational Approach to Dynamics of Flexible Multibody Systems

Abstract

This paper presents a variational formulation of constrained dynamics of flexible multibody systems, using a vector-variational calculus approach. Body reference frames are used to define global position and orientation of individual bodies in the system, located and oriented by position of its origin and Euler parameters, respectively. Small strain linear elastic deformation of individual components, relative to their body reference frames, is defined by linear combinations of deformation modes that are induced by constraint reaction forces and normal modes of vibration. A library of kinematic couplings between flexible and/or rigid bodies is defined and analyzed. Variational equations of motion for multibody systems are obtained and reduced to mixed differential-algebraic equations of motion. A space structure that must deform during deployment is analyzed, to illustrate use of the methods developed     

Tensegrity applied to modelling the motion of viruses

A considerable number of viruses’structures have been discovered and more are expected to be identified.Different viruses’symmetries can be observed at the nanoscale level.The mechanical models of some viruses realised by scientists are described in this paper,none of which has taken into consideration the internal deformation of subsystems. The authors’models for some viruses’elements are introduced,with rigid and flexible links,which reproduce the movements of viruses including internal deformations of the subunits.     

An Internal Damping Model for the Absolute Nodal Coordinate Formulation

Introducing internal damping in multibody system simulations is important as real-life systems usually exhibit this type of energy dissipation mechanism. When using an inertial coordinate method such as the absolute nodal coordinate formulation, damping forces must be carefully formulated in order not to damp rigid body motion, as both this and deformation are described by the same set of absolute nodal coordinates. This paper presents an internal damping model based on linear viscoelasticity for the absolute nodal coordinate formulation. A practical procedure for estimating the parameters that govern the dissipation of energy is proposed. The absence of energy dissipation under rigid body motion is demonstrated both analytically and numerically. Geometric nonlinearity is accounted for as deformations and deformation rates are evaluated by using the Green–Lagrange strain–displacement relationship. In addition, the resulting damping forces are functions of some constant matrices that can be calculated in advance, thereby avoiding the integration over the element volume each time the damping force vector is evaluated.     

复合柔性结构全局模态函数提取与状态空间模型构建

随着航空航天等领域中实际工程结构的大型化和柔性化,结构的非线性振动和主动振动控制问题越来越凸显.分析和处理此类结构出现的复杂振动问题的关键在于建立系统的非线性动力学模型与状态空间模型.对于由柔性部件、刚体、连接部件构成的复合柔性结构,由于各部件之间的振动耦合效应,单个柔性部件在悬臂、简支和自由等静定边界下的模态与结构的真实模态有较大差异.为此,本文提出复合柔性结构全局模态的解析提取方法,通过全局模态离散得到系统非线性动力学模型,从而构建状态空间模型.该方法采用笛卡尔坐标描述系统的运动,建立系统的运动方程;结合描述柔性部件的偏微分方程、刚体的常微分运动方程、连接界面处力、力矩、位移和转角的匹配条件以及系统的边界条件,利用分离变量法给出统一形式的频率方程,获取系统的固有频率和解析函数表征的全局模态.这里提出的全局模态提取方法不仅便于复合柔性结构固有频率和全局模态的参数化分析,而且为建立复合柔性结构低维非线性动力学模型和状态空间模型提供了有效的途径,对于推进这类结构的非线性动力学分析与主动振动控制研究具有重要意义.      

A New Flexible Multibody Beam Element Based on the Absolute Nodal Coordinate Formulation Using the Global Shape Function and the Analytical Mode Shape Function

Several techniques for the reduced dimensionality of finite elementformulations were considered as component mode reduction methods in themiddle sixties. These techniques are widely used in flexiblemultibody simulations for solving small deformation problems. Theabsolute nodal coordinate formulation for solving large rotation anddeformation problems has been established as a full finite elementmethod instead of using similar kinds of reduction techniques. In thispaper, a reduced order absolute nodal coordinate formulation is newlyestablished by introducing the global beam shape function and theanalytical deformation modes as a full finite element. This formulationleads to a constant and symmetric mass matrix as the conventionalabsolute nodal coordinate formulation, and makes it possible to reducethe number of elements and system coordinates of the beam structurewhich undergoes large rotations and large deformations. Numericalexamples show that the excellent agreements between thepresent formulation and the conventional absolute nodal coordinateformulation using a large number of elements are examined. These results demonstratethat the present formulation has high accuracy in the sense that thepresent solutions are similar to the conventional ones with fewersystem coordinates, and high efficiency in computation.     

径向基点插值法在旋转柔性梁动力学中的应用

将无网格径向基点插值法用于旋转柔性梁的动力学分析. 利用无网格方法对柔性梁的变形场进行离散,考虑梁的纵向拉伸变形和横向弯曲变形,并计入横向弯曲变形引起的纵向缩短,即非线性耦合项,运用第二类拉格朗日方程推导得到系统刚柔耦合动力学方程. 将无网格径向基点插值法的仿真结果有限元法和假设模态法进行比较分析,说明假设模态法的局限性,并表明其作为一种柔性体离散方法在刚柔耦合多体系统动力学的研究中具有可推广性,并讨论了径向基形状参数的影响. 同时运用3 种求解系统动力学方程的方法:纽马克方法、4阶龙格库塔法、亚当姆斯预报校正法,并比较各方法的计算效率, 结果表明纽马克方法最快.      

Experimental analysis of crack tip fields in rubber materials under large deformation

A three-nested-deformation model is proposed to describe crack-tip fields in rubber-like materials with large deformation.The model is inspired by the distribution of the measured in-plane and out-of-plane deformation.The inplane displacement of crack-tip fields under both Mode I and mixed-mode(Mode I-II) fracture conditions is measured by using the digital Moire’ method.The deformation characteristics and experimental sector division mode are investigated by comparing the measured displacement fields under different fracture modes.The out-of-plane displacement field near the crack tip is measured using the three-dimensional digital speckle correlation method.     

Comparison of methods for vibration analysis of electrostatic precipitators

The paper presents two methods for the formulation of free vibration analysis of collecting electrodes of precipitators.The first,called the hybrid finite element method, combines the finit element method used for calculations of spring deformations with the rigid finite element method used to reflect mass and geometrical features,which is called the hybrid finite element method.As a result,a model with a diagonal mass matrix is obtained.Due to a specific geometry of the electrodes,which are long plates of complicated shapes,the second method proposed is the strip method which is a semi-analytical method.The strip method allows us to formulate the equations of motion with a considerably smaller number of generalized coordinates.Results of numerical calculations obtained by both methods are compared with those obtained using commercial software like ANSYS and ABAQUS.Good compatibility of results is achieved.     

Dynamics of Articulated Structures. Part I. Theory

ABSTRACT

A finite element based method is developed for geometrically nonlinear dynamic analysis of spatial articulated structures; i.e., structures in which kinematic connections permit large relative displacement between components that undergo small elastic deformation. Vibration and static correction modes are used to account for linear elastic deformation of components. Kinematic constraints between components are used to define boundary conditions for vibration analysis and loads for static correction mode analysis. Constraint equations between flexible bodies are derived in a systematic way and a Lagrange multiplier formulation is used to generate the coupled large displacement-small deformation equations of motion. A lumped mass finite element structural analysis formulation is used to generate deformation modes. An intermediate-processor is used to calculate time-independent terms in the equations of motion and to generate input data for a large-scale dynamic analysis code that includes coupled effects of geometric nonlinearity and elastic deformation. Examples are presented and the effects of deformation mode selection on dynamic prediction are analyzed in Part II of the paper.     

Development of flexible telescopic boom model using absolute nodal coordinate formulation sliding joint constraints with LuGre friction

In this investigation, a modeling procedure of a telescopic boom of cranes is developed using the absolute nodal coordinate formulation together with the sliding joint constraints. Since telescopic booms are extracted and retracted under various operating conditions, the overall length of the boom changes dynamically, leading to the time-variant vibration characteristics. For modeling the telescopic structure of booms, a special care needs to be exercised since the location of the sliding contact point moves along the deformable axis of the flexible boom and the solution to a moving boundary problem is required. This issue indeed makes the modeling of the telescopic boom difficult, despite the significant needs for the analysis. It is, therefore, the objective of this investigation to develop a modeling procedure for the flexible telescopic boom by considering the sliding contact condition with the dynamic frictional effect. To this end, the sliding joint constraint developed for the absolute nodal coordinate formulation is employed for describing relative sliding motion between flexible booms, while flexible booms are modeled using the beam element of the absolute nodal coordinate formulation, which allows for modeling the large rotation and deformation of the structure.