Electrical and electroluminescence properties of ITO/PEDOT:PSS/TPD:Alq3:C60/Al organic light emitting diodes

Organic light emitting diodes (OLEDs) of ITO/PEDOT:PSS/TPD:Alq₃:C₆₀/Al with different C₆₀ concentrations (0-6.0 wt.%) have been fabricated. The physical parameters including electrical and optical properties of the samples have been measured by Luminance-current-voltage (L-I-V) characteristics and optical absorbance. The current-voltage characteristics indicate that field-emission tunneling injection dominates in the diodes at high applied voltages. It is found that with increasing the concentration of C₆₀, the injection barrier for holes slightly reduces and the hole’s mobility increases over two orders of magnitude. Also, electroluminescence enhances with the presence of C₆₀ in the blend; optimum current efficiency occurs at 3 wt% C₆₀. The method provides a simple way of increasing the efficiency of OLEDs.     

基于Ir(ppy)3载流子直接复合发光的OLED机理研究

针对载流子在面式-三（2-苯基吡啶基-N,C^2’）铱（Ⅲ）（Ir（ppy）₃）上的聚集会对器件性能产生不良影响,在发光层中分别掺入4% 的双（2-（4,6-二氟苯基）吡啶基-N,C^2’）铱（Ⅲ）（吡啶-2-羧基）配合物（FIrpic）和4% 的4,4’,4"-三（咔唑-9-基）三苯胺（TCTA）,器件的性能有明显的提高,最高电流效率分别达到51 cd/A和43.1 cd/A,提高约79%和50%,我们将器件效率的提高归因于TCTA和FIrpic可以使聚集在Ir（ppy）₃界面的空穴向主体材料4,4’-二（咔唑-9-基）联苯（CBP）转移,进而可减弱对激子的猝灭作用。     

MgF2与Alq3(八羟基喹啉)反应的高分辨电子能量损失谱研究

介绍了用高分辨电子能量损失谱(HREELS)研究MgF₂与Alq₃(八羟基 喹啉)的反应.结果表明无论MgF₂蒸镀到Alq₃上或Alq₃蒸镀到MgF_{2上，MgF2与Alq3均发生了相同的反应.在反应中，对应于Alq3分子非平面苯环弯曲振动的能量损失峰位置发生了移 动.HREELS的研究结果表明从MgF2中的Mg与Alq3中的Al,O和N相互作用，Mg 的位置处于Alq3分子的平面外. 关键词： 2}')" href="#">MgF₂ 八羟基喹啉 高分辨电子能量损失谱     

Luminescence and OSL study of the inorganic compounds Tl-doped (NH4)2BeF4 and (NH4)2SiF6

The search of materials with efficient optically stimulated luminescence (OSL) properties and a high hydrogen content for fast neutron dosimetry has led to the development of Tl⁺-doped ammonium salts (NH₄)₂SiF₆ and (NH₄)₂BeF₄. Preliminary OSL studies have shown that the OSL in (NH₄)₂SiF₆:Tl⁺ and (NH₄)₂BeF₄:Tl⁺is efficient. In order to optimise the OSL emission and its detection, the identification of the luminescent centres in the OSL process is necessary. This study focuses on the identification of the luminescent centres associated with Tl⁺ based on optical studies in the vacuum UV (VUV) at different temperatures.     

Action of monoatomic cations on the structure and spectra of Mx(1)M1-x(2)UO2(NO3)3 crystals

The action of the monovalent M⁺ cations on the luminescent properties of the mixed M _x ⁽¹⁾ M _1-x ⁽²⁾ UO₂(NO₃)₃ crystals, where M is Na, K, Rb, Cs, or NH₄ , has been investigated. It has been established that the spectral positions of the bands of vibronic transitions depend linearly on the ratio between the concentrations of the M⁽¹⁰⁾ and M⁽²⁾ cations. It is shown that the crystals considered are composed of l[RbUO₂(NO₃)₃]n[CsUO₂(NO₃)₃] clusters, where l/n = x/(1 - x). The spectral regularities revealed are determined by the partial contributions of the M⁽¹⁾ and M⁽²⁾ cations to their combined, polarizing action on the uranyl complex and are explained by the ligand nature of its highest occupied molecular orbital.Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 71, No. 6, pp. 827–830, November–December, 2004.This revised version was published online in April 2005 with a corrected cover date.     

Vibration spectroscopic study of the interaction of tris-(8-hydroxyquinoline) aluminum (Alq3) with potassium

The interaction between Alq₃ and potassium was studied by using Raman and infrared spectroscopies. Infrared reflection absorption spectroscopy (IRRAS) spectra of Alq₃ films show significant changes after potassium deposition, such as the appearance of new bands and changes in relative intensity. Surface-enhanced Raman scattering (SERS) spectra obtained using the 413.1 nm line of a Kr⁺ laser reveal similar changes. Changes are even more obvious when the 530.9 nm line was used for excitation. Changes in the SERS for excitation with the 413.1 nm line are less obvious due to a strong photoluminescence. The vibrational pattern of potassium-doped Alq₃ cannot be explained by the formation of radical anion by simple charge transfer, indicating the excess electron is not delocalized over the molecule. The observed spectral change suggests that the potassium atom interacts with both nitrogen and oxygen atoms of Alq₃ molecule.     

Structural and electrical impedance study of Pb(Sr1/3Nb2/3)O3

Lead-based ceramic Pb(Sr_1/3Nb_2/3)O₃ (PSN) is prepared by the columbite precursor method and structurally characterized using XRD. The X-ray diffraction shows a perovskite structure with cubic pyrochlore phase. Detailed studies of ε′ and ε″ of the compounds show that the compounds exhibit dielectric anomaly. Impedance spectroscopy is used to characterize the electrical behaviour. Results indicate that the relaxation mechanism of the material is temperature dependent and has dominant bulk contribution in different temperature ranges. Modulus spectroscopic data were used to gain an insight into the electrical properties of the samples and with a view to observe the relaxations in them. Frequency dependence dielectric permittivity shows typical Debye-type dielectric dispersion. Temperature-dependent DC resistivity shows that resistance decreases with the increase in temperature and follows Arrhenius behaviour in different temperature regions.     

Syntheses and electroluminescent properties of two europium ternary complexes Eu(DBM)3(PBO) and Eu(DBM)3(PBT)

Two europium complexes, Eu(DBM)₃(PBO) and Eu(DBM)₃(PBT) (DBM=dibenzoylmethanato, PBO=2-(2-pyridyl)benzoxazole, PBT=2-(2-pyridyl)benzothiazole), were prepared and used as emitting materials in organic electroluminescent (EL) devices. The devices with the structures ITO/TPD/Eu(DBM)₃(PBO) (or Eu(DBM)₃(PBT)/BCP/Alq₃/Mg:Ag/Ag emit red light originating from the europium complexes.     

A facile one-pot solvothermal route to tubular forms of luminescent polymeric networks [(C3N3)2(NH)3]n

A facile one-pot solvothermal route has been developed for the synthesis of tubular luminescent polymeric networks [(C₃N₃)₂(NH)₃]_n, structurally related to the proposed g-C₃N₄. XRD patterns showed a characteristic 002 basal plane diffractions, indicating an interlayer d spacing of 3.23 Å. XPS spectra show that the C1s and N1s have a symmetric peak and an asymmetric peak at 288.10 and 399.00 eV, respectively. The bulk composition C₆N_8.9H_4.5 determined by elemental analysis is comparable to the calculated value C₆N₉H₃ for this proposed polymer. FTIR spectra indicated the presence of s-triazine ring, which was further supported by the luminescent and UV-vis absorption characteristics probably depending on π→π^* electronic transition. The tubular structure has been studied by TEM, SAED, and HREM.     

Infrared and visible spectroscopic studies of the ytterbium doped borate Li6Y(BO3)3

The spectroscopic study of trivalent ytterbium doped Li₆Y(BO₃)₃ is conducted in the UV-visible and infrared range. An excitation in the charge transfer band of ytterbium has been selected in order to reduce the reabsorption effect on the IR emission intensity. The maximum of the emission is located at 972 nm for an excitation at 230 nm. The energy level assignment has been successfully conducted using vibrational spectroscopy to distinguish the pure electronic transitions from the phonon-assisted ones. The splitting of the ²F_5/2 and ²F_7/2 components is equal to 523 cm⁻¹ and 676 cm⁻¹, respectively. The decay time dependence as a function of the concentration is also reported. The calculated value τ_rad is about (1.03 ± 0.01) ms for the 1% doped material. For the highest concentration, an IR excitation gives rise to the observation of a blue-green luminescence caused by two mechanisms: an erbium emission at 550 nm after upconversion and a cooperative luminescence of ytterbium ions.     

真空紫外光激发下Ce3+、Tb3+激活的BaCa2(BO3)2的发光性质

利用XRD、VUV及UV光谱等方法对Ce³⁺、Tb³⁺离子掺杂以及Ce³⁺、Tb³⁺离子共掺的3种BaCa₂(BO₃)₂荧光粉的相纯度、发光性质、浓度猝灭现象进行研究。结果表明:3种荧光粉在VUV波段有较好的吸收,基质吸收带位于140～190 nm范围。Ce³⁺在BaCa₂(BO₃)₂的最低4f5d跃迁带位置在360 nm附近,其5d→²F_J(J=5/2, 7/2)发射峰分别位于393,424 nm。Tb³⁺掺杂的样品在172 nm激发下的发射光谱由4个窄带组成,分别对应⁵D₄→⁷F_J(J=3,4,5,6)的跃迁,其中占主导位置的是⁵D₄→⁷F₅的跃迁,大约位于543 nm处,主要为绿光发射。在Ce³⁺,Tb³⁺离子共掺杂的BaCa₂(BO₃)₂光谱中,观察到Ce³⁺-Tb³⁺离子间有能量传递。     

自组装银膜增强8-羟基喹啉铝(Alq_3)光致发光的实验和理论研究

实验和理论研究了不同自组装密度的银纳米颗粒膜对8-羟基喹啉铝(Alq_3)光致发光的影响,结果表明:Alq_3光致发光的表观增强和发射增强因子与银纳米颗粒膜密度呈正相关关系,最大值约为3.2和13;理论计算表明银纳米颗粒膜对Alq_3光致发光的量子效率和发射的最大增强因子约为1.4和15,对比实验和理论结果,金属纳米颗粒膜的近场场强增强是导致Alq3光致发光发射强度增强的主要因素,且Alq_3光致发光效率与Alq_3相对银纳米颗粒的分布和"热点"区域面积覆盖率有关。     

A combinatorial approach to the discovery and optimization of YCa4O(BO3)3-based luminescent materials

Thin films of YCa₄O(BO₃)₃ (YCOB)-based new luminescent materials were explored by the combinatorial pulsed laser deposition (PLD) method which enabled us to fabricate continuous composition spread film libraries. Strong red and green luminescence were found in the Y_1−xEu_xCOB (0 ≤ x ≤ 1), (YEuCOB) and Y_1−yTb_yCOB (0 ≤ y ≤ 1) (YTbCOB) films, respectively. The film libraries were characterized by photoluminescence (PL), PL decay, an electron-probe microanalyzer and an electron diffraction analysis. The luminescent intensities in the amorphous film libraries strongly depended on the chemical composition of each rare-earth (RE) ion. The optimum concentration of rare-earth ions in YEuCOB and YTbCOB were experimentally determined to be Eu = 7.5% and Tb = 20-30%, respectively.     

Yb and Yb-Eu luminescent properties of the Li2Lu5O4(BO3)3 phase

The luminescence of Yb³⁺ in the oxyborate Li₂Lu₅O₄(BO₃)₃ is reported. At low temperature, in addition to the usual ytterbium infrared emission, this phosphor presents an emission in the ultraviolet () which corresponds to the transition from the charge transfer state (O-Yb) to the 4f levels of Yb³⁺. The temperature quenching Tq50% is equal to 120 K. The infrared emission studied at room temperature is located between 950 and 1100 nm.Europium emission quenching in the Li₂Yb₅O₄(BO₃)₃ phase is related to Eu→Yb transfer by cross-relaxation. The reverse Yb→Eu transfer by cooperative sensitization is highlighted in the codoped Li₂Lu₅O₄(BO₃)₃ compound.     

A comparative study on structural,morphological and luminescence characteristics of Zn3(VO4)2 phosphor prepared via hydrothermal and citrate-gel combustion routes

Comparison of structural, morphological and spectroscopic properties of zinc vanadate Zn₃(VO₄)₂ phosphor synthesized via two different methods, viz. citrate-gel combustion and hydrothermal reaction, is presented. Highly crystalline and pure phase micro-rods are achieved by citrate-gel combustion route. The hydrothermal reaction products exhibit ribbon like structures. X-ray photoelectron spectroscopic investigation reveals the presence of multiple oxidation states of vanadium in the hydrothermally synthesized phosphor. Luminescence properties have also been compared and the effect of divalent cationic substitution (Ca, Mg) is presented.     

Crystal structure and thermal behavior of two new organic monosulfates NH3(CH2)5NH3SO4 1.5H2O and NH3(CH2)9NH3SO4 H2O

The chemical preparation, the calorimetric studies and the crystal structure are given for two new organic sulfates NH₃(CH₂)₅NH₃SO₄ 1.5H₂O (DAP-S) and NH₃(CH₂)₉NH₃SO₄·H₂O (DAN-S). DAP-S is monoclinic P2₁/n with unit cell dimensions: a=11.9330(2) Å; b=10.9290(2) Å; c=17.5260(2) Å; β=101.873(1)°; V=2236.77(6) Å³; and Z=8. Its atomic arrangement is described as inorganic layers of units and water molecules separated by organic chains. DAN-S is monoclinic P2₁/c with unit cell parameters: a=5.768(2) Å; b=25.890(10) Å; c=11.177(5) Å; β=115.70(4)°; V=1504.0(11) Å³ and Z=4. Its structure exhibits infinite chains, parallel to the [100] direction where the organic cations are interconnected. In both structures a network of strong and weak hydrogen bonds connects the different components in the building of the crystal.     

Electrical bistability of tris-(8-hydroxyquinoline) aluminum (Alq3)/ZnSe organic-inorganic bistable device

We present that the electrical bistability in organic-inorganic bistable devices based on tris-(8-hydroxyquinoline) aluminum (Alq₃) and zinc selenide (ZnSe) with the tri-layer structure of Alq₃/aluminum (Al)/ZnSe. The current-voltage characteristics of the bistable device exhibit two electrical states as low (OFF state) and high (ON state) conductivity with ON/OFF ratio about four orders of magnitude. The conduction mechanisms in both ON and OFF states were analyzed by theoretical model. In the OFF state, the conduction mechanisms can be explained by thermionic emission model, which the ON state can be described by ohmic conduction model. The retention times of both states are more than 8000 s, and the device can reproduce continuous write-read-erase-read switching cycles. Moreover, for the organic-inorganic bistable device was kept at one year in ambient condition without encapsulation. The device still exhibited the electrical bistable behavior. Consequently, the ZnSe layer may be led to improve the lifetime property of the bistable device which acted as a self-encapsulating layer.     

A comparative study of electronic structure and magnetic properties of SrCrO3 and SrMoO3

A comparative study of electronic structure and magnetic properties of SrCrO₃ and SrMoO₃ has been carried out using FPLAPW method with density-functional theory. The calculated results suggest that both compounds are nonmagnetic (NM) metal in cubic structures at room temperature, and they exhibit very similar band structure and electronic properties except more extend Mo 4d orbitals than Cr 3d electronic states. However, the electronic structure and magnetic properties exhibit remarkable differences between them in the low temperature phases. SrCrO₃ is with a C-AFM ground state with magnetic moment of 1.18μ_B/Cr in the tetragonal structure, while SrMoO₃ is with a NM ground state in the orthorhombic structure. It is assumed that the extend 4d orbitals may be the reason which results in NM solution at low temperature phase of SrMoO₃.     

Effect of SiO2/Si3N4 dielectric distributed Bragg reflectors (DDBRs) for Alq3/NPB thin-film resonant cavity organic light emitting diodes

In this article, we report on the effect of SiO₂/Si₃N₄ dielectric distributed Bragg reflectors (DDBRs) for Alq₃/NPB thin-film resonant cavity organic light emitting diode (RCOLED) in increasing the light output intensity and reducing the linewidth of spontaneous emission spectrum. The optimum DDBR number is found as 3 pairs. The device performance will be bad by further increasing or decreasing the number of DDBR. As compared to the conventional Alq₃/NPB thin-film organic light emitting diode (OLED), the Alq₃/NPB thin-film RCOLED with 3-pair DDBRs has the superior electrical and optical characteristics including a forward voltage of 6 V, a current efficiency of 3.4 cd/A, a luminance of 2715 cd/m² under the injection current density of 1000 A/m², and a full width at half maximum (FWHM) of 12 nm for emission spectrum over the 5-9 V bias range. These results represent that the Alq₃/NPB thin-film OLED with DDBRs shows a potential as the light source for plastic optical fiber (POF) communication system.     

Detailed infrared spectroscopic study of thermal transitions in new hybrid [(CH3)2CHNH3]4Cd3Cl10 crystal

Phase transitions of tetra(isopropylammonium)decachlorotricadmate(II) [(CH₃)₂CHNH₃]₄Cd₃Cl₁₀ crystal have been studied by infrared, far infrared and Raman measurements in wide temperature range, between 11 K and 388 K. The temperature changes of wavenumber, center of gravity, width and intensity of the bands were analyzed to clarify cationic and anionic contributions to the phase transitions mechanism. The results of investigation showed earlier by differential scanning calorimetry (DSC), thermal expansion and dielectric measurements clearly confirmed the sequence of phase transitions at T₁=353 K, T₂=294 K and T₃=260 K. The current results derived from DSC and infrared measurements revealed additional phase transition at T₄=120 K.