首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 140 毫秒
1.
杨春霞  周晶  龚波林 《色谱》2009,27(2):191-196
以自制的5.0 μm单分散大孔亲水交联聚甲基丙烯酸环氧丙酯(PGMA/EDMA)微球为基质,对其表面进行化学改性,合成弱阳离子交换色谱填料(WCX)。详细考察了该填料对标准蛋白质的分离性能、表面亲水性能、稳定性和重现性以及流速对蛋白保留的影响。实验结果表明,该色谱填料对蛋白的分离性能、重现性及稳定性良好;在流速为3 mL/min时,采用线性梯度洗脱,6 min内可分离4种标准碱性蛋白质,以溶菌酶测定的该填料的动力学吸附容量为29.86 mg/g。将其用于鱼精蛋白的分离纯化,经反相高效液相色谱测定纯化后鱼精蛋白的纯度为99.2%;与商品Shodex IEC SP-825强阳离子交换色谱柱比较,纯化结果几乎一样。  相似文献   

2.
采用微波辅助合成技术,快速制备了以替考拉宁为固定相的开管毛细管电色谱柱。在pH 4.0~7.0的范围内比较了空管与替考拉宁修饰柱的电渗情况,表明替考拉宁开管毛细管电色谱柱有效地降低了电渗。用该色谱柱分离了多种手性对映体,均达到基线分离,体现了替考拉宁开管毛细管电色谱柱良好的分离性能。以DL-色氨酸考察了柱子的稳定性和重现性,结果显示采用微波辅助合成技术制得的替考拉宁开管毛细管电色谱柱具有良好的稳定性和重现性。  相似文献   

3.
本研究制备了一种应用于液-质联用(LC-MS)系统中的带喷头混合型毛细管色谱柱.用标准蛋白和酵母蛋白胰蛋白酶酶切溶液考察了其在LC—MS中的离子化效率、毛细管色谱柱分离性能和寿命,并与直接填充型毛细管色谱柱的色谱性能进行比较,未见显著性差异.将制备的带喷头混合型毛细管色谱柱应用于鼠肝蛋白组的分析,在假阳性率为1%的条件下鉴定到1262个肽段,归属于513个蛋白簇.通过对鉴定蛋白质理化性能的统计分析,其等电点和分子量分布高于一般两维凝胶电泳的范围.实验结果还表明该混合型毛细管色谱柱在肽段的理化性能上没有偏性,可以广泛应用于蛋白质组学的研究中.  相似文献   

4.
以3-[N,N-二甲基-[2-(2-甲基丙-2-烯酰氧基)乙基]铵]丙烷-1-磺酸内盐(SPE)为功能单体,季戊四醇三丙烯酸酯(PETA)为交联剂,环己醇和乙二醇(EG)为致孔剂,通过原位聚合法制备磺酸甜菜碱型两性离子亲水毛细管整体柱。优化单体、交联剂和致孔剂的比例等因素,考察了不同SPE含量对整体柱性能和选择性的影响。在最优制备条件下,以苯酚类化合物、烷基苯类化合物和苯甲酸类化合物为分离对象,评价该整体柱的色谱性能以及分离机理。在不同的色谱条件下,该整体柱具有亲水、疏水以及离子交换作用。此整体柱在0.05 m L/min的流速下(线速度为0.265 mm/s)分离烷基苯类化合物时,柱效高达41000~56000 plates/m,该整体柱重现性良好,连续运行的重现性(RSD)低于1.2%。在亲水/离子交换色谱模式下,该整体柱可应用于核苷和碱基的高效分离。  相似文献   

5.
吸附固定相电色谱和动态改性电色谱的手性分离   总被引:2,自引:0,他引:2  
对动态改性电色谱手性分离进行了研究。电色谱柱填充强阴离子交换固定相(SAX0,添加在流动相中的磺化β-环糊精(S-CD)动态地吸陵于SAX填料表面,形成一层准手性固定相。色氨酸、阿托品和异博定对映体在本体系获得了很好的分离,它们的分离分别为2.06,10.1和1.96,对映体峰的柱效价于85,000塔板数/米和412,000塔板数/米之间。连续运行17次,死时间和色氨酸对映体的电色谱保留因子的相对标准偏差分别为0.53%,0.62%和0.69%。此外,以吸附于SAX填料的牛血清白蛋白和S-CD为手性固定相进行了电色谱手性分离的研究。在这两种体系下分离色氨酸对映体的分离度分别为3.86和2.97。吸附S-CD柱电色谱和动态改性电谱的重现性进行子比较,发现动态改性电色谱有更好的重现性。  相似文献   

6.
以2.5 μm的单分散聚苯乙烯为种子,乙二醇二甲基丙烯酸酯 (EDMA)为交联剂,甲苯和环己醇为致孔剂,采用"一步种子溶胀聚合法"制备了单分散微球; 再以过硫酸钾为引发剂将水溶性温敏单体N-异丙基丙烯酰胺(NIPAM)分子引发聚合到微球表面,制备了粒径为7.0 μm、分散系数为0.02的单分散交联温敏色谱填料,温敏单体NIPAM的接枝率为5.2%.考察了该填料对标准蛋白质的分离性能、温敏性能、稳定性和重现性以及动态吸附容量对蛋白保留的影响.实验结果表明,该色谱填料对蛋白的分离性能、温敏性能、稳定性及重现性良好,且对溶菌酶的动态吸附容量为32.3 mg/g.在疏水模式下,该填料不但可以同时基线分离5种标准蛋白,而且通过改变温度可以有效地将3种在低温下保留时间重叠的蛋白(细胞色素-C、β-乳球蛋白和核糖核酸酶)完全分离.  相似文献   

7.
以采用文献方法合成的化合物2,6-二丁基-β-环糊精为固定相,经溶胶-凝胶法制备了毛细管气相色谱柱。用此毛细管柱分离了难以分开的二甲苯的异构体、极性的胺类和醇类、以及非极性的烷烃类化合物。对此分离柱的色谱参数进行了测定,其不对称因子为1;柱效率是每米2 876块塔板;固定相的极性用麦氏常数之和表示是1 215;色谱分离保留时间的重现性用10次测定的相对标准偏差表示,其值小于0.3%。所有数据表明,该色谱柱性能优良。  相似文献   

8.
采用聚甲基苯基硅氧烷、Carbowax 20M、PEG-silane为固定相制取了溶胶-凝胶气相色谱毛细管柱在这些色谱柱上脂肪酸、酚类、胺和苯胺类、醇、醛等各类化合物都得到很好的分离一采用这些固定相的溶胶一凝胶柱对化合物的分离也表现出很好的重现性。溶胶-凝胶法制柱对各类固定相是普遍适用的方法.  相似文献   

9.
胃蛋白酶亲和有机聚合物毛细管整体柱的制备及性能考察   总被引:1,自引:0,他引:1  
池翠杰  王伟  季一兵 《色谱》2014,32(8):791-797
以热引发原位聚合方法制备了聚(甲基丙烯酸缩水甘油酯(glycidyl methacrylate,GMA)-乙二醇二甲基丙烯酸酯(ethyleneglycol dimethacrylate,EDMA))毛细管整体柱,对整体柱的性能进行了表征。结果表明,柱内部结构均匀、渗透性好;整体柱能够实现苯等中性小分子化合物的分离,具有反相色谱特征,重现性和稳定性良好。利用整体柱环氧基团的活性,采用间接法,以戊二醛为连接臂制备胃蛋白酶亲和手性整体柱。在毛细管电色谱模式下进行了柱分离性能研究,并对缓冲液pH值和运行电压等分离条件进行了考察。结果表明,亲和整体柱对4种碱性手性药物(奈福泮、氨氯地平、西酞普兰、扑尔敏)有拆分效果,奈福泮、氨氯地平、西酞普兰能达到基线分离。本文为蛋白质亲和毛细管电色谱整体柱的制备和应用提供了新的思路和方法。  相似文献   

10.
一种反相毛细管液相色谱整体柱的制备方法及其色谱性能   总被引:6,自引:3,他引:3  
鲁彦  郭建宇  张祥民 《分析化学》2006,34(10):1463-1466
在优化条件下成功制备了50μm、75μm、100μm和200μm等多种口径的硅胶基质毛细管液相色谱整体柱,克服了文献报道中常见的开裂、重现性差等缺点。考察了柱压降与流速的关系,以多环芳烃系列化合物评价了自制的C18硅胶基质毛细管液相色谱整体柱的色谱性能,在以甲醇-水为流动相的反相色谱条件下,5种化合物(苯、萘、联萘、芴和蒽)得到了基线分离。该柱对萘的柱效达到了67000塔板/米。  相似文献   

11.
IntroductionFordecades,macroporouspolymericbeadshavebeenwidelyemployedasakindofchromatographicmatrixfortheanalysisandseparationofproteins.However,someinherentdrawbacks.suchasthecomplicatedsyntheticprocessortheloweroccupiedspaceinsideachromatographicc...  相似文献   

12.
13.
The peculiarities of the flow splitting technique for sample injection into a capillary column have been discussed. A comparative investigation of reproducibility of the analytical results obtained for two gas chromatographic systems using flow splitting [1) sample injector-packed predolumn-splitter-open tubular capillary column and (2) sample injector-splitter-open tubular capillary column] has been carried out. It was experimentally shown that the first system ensures considerably better reproducibility for the results concerning the composition of the analyzed mixtures. Other advantages of the first system are also discussed.  相似文献   

14.
以单体,致孔剂在不锈钢柱管中直接聚合的方法,合成了一种丙烯酰胺-甲基丙烯酸丁酯-N,N‘-亚甲基双丙烯酰胺聚合物连续棒状疏水色谱柱。考察了聚合物单体中甲基丙酸丁酯的含量对于标准蛋白质的分离效果和介质疏水性的影响。  相似文献   

15.
Ways of utilizing the true separation efficiency of monolithic silica (MS) columns were studied. The true performance of MS columns, both regular-sized (rod-type clad with PEEK resin, 4.6 mm ID, 10 cm) and capillary sized (in 100 or 200 microm ID fused silica capillary, 25-140 cm) was evaluated by calculating the contribution of extra-column effects. HETP values of 7-9 microm were observed for solutes having retention factors (kvalues) of up to 4 for rod columns and up to 15 for a capillary column. The high permeability of MS columns allowed the use of long columns, with several connected together in the case of rod columns. Narrow-bore connectors gave good results. Peak variance caused by a column connector ranges from 50 to 70% of that caused by one rod-type column for up to three connectors or four columns in 80% methanol, but the addition of a 4th or 5th connector to add a 5th and 6th column, respectively, caused a much greater increase in peak variance, especially for long-retained solutes, which is greater than the variance caused by one rod column. Rod columns seem to show slightly lower efficiency at a pressure higher than 10 MPa or so. The use of acetonitrile-water as a mobile phase better preserved the ability of individual rod columns to generate up to 100,000 theoretical plates with 14 columns connected. Methods for eliminating extra-column effects in micro-HPLC were also studied. Split injection and on-column detection resulted in optimum performance. A long MS capillary measuring 140 cm produced 160,000 theoretical plates. The column efficiency of a capillary column was not affected by the pressure, showing advantages over the rod columns that exhibited peak broadening caused by connectors and pressure.  相似文献   

16.
Double Pore Silica Gel Monolith Applied to Liquid Chromatography   总被引:2,自引:0,他引:2  
Silica gels retaining double pore structure in the size ranges of micrometer and nanometer have been applied to the rod-shaped monolithic column for liquid chromatography. The macropore structure was designed by controlling the phase separation process induced by the hydrolysis and polycondensation of alkoxysilane, whereas the mesopore structure was tailored by the solvent exchange treatments on wet gels. The size exclusion chromatograms on polystyrene standards exhibited almost similar features for octadecyl-modified rod and conventional packed beads columns. The dependence of plate height on the velocity of mobile phase determined for amylbenzene was by far weaker in the rod column than in the packed beads column, suggesting that additional geometrical factors should be considered in describing the separation mechanism in the rod column.  相似文献   

17.
A survey was conducted to determine the reproducibility of retention times in both the first (D1) and second dimension (D2) axes of the two-dimensional separation space, in the comprehensive two-dimensional gas chromatographic analysis of an essential oil sample using cryogenic modulation. The retention times in the two dimensions for a number of individual components comprising hydrocarbon, alcohol, ester and ketone chemical classes in a Melaleuca alternifolia essential oil were recorded from replicate analyses using four separate column sets and two identical gas chromatographs. Run-to-run, day-to-day, instrument-to-instrument, and column set-to-column set reproducibility were demonstrated from the experimental design. A total of 60 GC x GC analyses were conducted. The longitudinally modulated cryogenic system produced reproducible modulation start times and consistent modulation phase profiles for individual components in all experiments, and retention time variations in both dimensions were negligible. The average run-to-run reproducibility of 43 components for six replicate injections was found to be 0.12% RSD in the first dimension, and 0.74% RSD in the second dimension. Day-to-day reproducibility showed statistically "significant" difference (F-test), but this was partly ascribable to the excellent within-day reproducibility that led to apparent day-to-day differences. Confidence in absolute retention times (hence component positions) in the two-dimensional separation space is critical to component identification.  相似文献   

18.
Continuous rod of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate) was prepared by a free radical polymerization within the confines of a stainless-steel column. The epoxide groups of the rod were modified by a reaction with iminodiacetic acid (IDA) that affords the active site to form metal IDA chelates used for immobilized metal affinity chromatography (IMAC). The efficiency of coupling of IDA to the epoxide-contained matrix was studied as a function of reaction time and temperature. High-performance separation of proteins, based on immobilized different metals on the column, were described. The influence of pH on the adsorption capacity of bovine serum albumin on the Cu2+-IDA continuous rod column was investigated in the range from 5.0 to 9.0. Purification of lysozyme from egg white and human serum albumin (HSA) on the commercially available HSA solution were performed on the naked IDA and Cu2+-IDA continuous rod columns, respectively; and the purity of the obtained fractions was detected by matrix-assisted laser desorption-ionization time-of-flight mass spectrometry.  相似文献   

19.
Summary High resolution gas chromatography requires the highest performance characteristics of gas chromatographic systems in terms of sampling and sample handling in strumentation, columns, and data handling. This paoper describes high precision computer measurements for characterizing capillary column efficiencies which are within 75% of the theoretical limit of capillary GC. Particular emphasis is given to detailed peak shape analysis, measurement accuracy and reproducibility, and system stability. Using known instrument performance parameters, it is then possible to characterize column performance with high accuracy in a meaningful manner. It is proposed that wall-coated tubular columns be characterized in terms of their chromatographic performance by the following parameters: Trennzahl (separation number), number of theoretical plates/meter, program temperature beseline stability, acid-base ratio, and the coefficient of skewness for 1-octanol. Statistical moments (m2) and hybrid moments are used to describe capillary column chromatographic performance because they may be related to basic physico-chemical column processes. These measurements are very sensitive parameters for characterizing GC columns. Using an online computer-based data system, the limits of capillary GC are shown to be limited by the sampling and injection steps.  相似文献   

20.
Summary Algorithms for the time optimization of an HPLC separation are presented. Resolution, column performance, extra-column variance, capacity factor, and column length are incorporated into these algorithms. Extracolumn variance for a high-speed microbore system (1 mm i. d. column) was assessed using 2nd moment variance and a non-linear extrapolation of tubing length to zero. Extra-column variance, as a function of flowrate, was incorporated into the reduced operating curve of column performance. The use of empirical correction factors for column reproducibility and homogeneity are suggested. Cutting to an optimum length did not degrade column performance. These algorithms were applied to the optimization of a microbore assay for theophylline, in a simple xanthine mixture. Resulting total analysis times were reduced to 10seconds per sample, at a flowrate of 700l/min.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号