St/AN乳液共聚合的表观竞聚率和恒比组成

<正> 共聚合中竞聚率的正确测算对于研究共聚物组成与单体配料比及转化率的关系、共聚物组成分布及链段分布和共聚合机理都有重要意义。对于大多数二元自由基共聚体系,聚合方法不同对竞聚率无影响,但对某些聚合体系,如苯乙烯/丙烯腈,不同的聚合方法测得的“竞聚率”会有所不同。一般文献报道,苯乙烯/丙烯腈自由基共聚合,60℃下的竞聚率分别为r_st=0.41±0.08,r_(AN)=0.04±0.04,均系本体聚合的实验结果。为此,     

正丁基锂、四氢呋喃引发的丁苯共聚合(Ⅱ)——动力学及活性种的反应性

本文提出了n·BuLi-THF引发的阴离子丁苯共聚体系中诸活性种之间的平衡及增长图式,导出了共聚组成方程,讨论了单体的表观竞聚率的含义。此外,还建立了表观增长速度常数k_B和kS与[THF]的关系式,估算出一络合活性种对形成聚丁二烯链节中乙烯基结构的几率。     

Some aspects of anionic butadiene copolymerization

The relationship between ideal copolymerization behavior and the nature of reactive species in butyllithium (n-BuLi) initiated anionic copolymerization of styrene (St)- butadiene (Bd) in nonpolar solvent has been discussed. The monomer reactivity ratios (m.r.r.) for various reactive species were evaluated by kinetic study and statistical approach (using ¹³C NMR data) in St-Bd anionic copolymerization system with THF as polar additive. The Markovian mechanisms for different propagating reactions in this complex copolymerizing system have been postulated. Furthermore, “pseudo” zero order Markovian mechnism could be sophisticatedly established in the n-BuLi/tertiary amyloxy potassium (t-AmOK)/THF initiated St-Bd copolymerization system, provided that the apparent rate constants of both monomers are equal. Thus, by adjusting the ratio of K/Li and THF/Li, copolymers with composition almost identical to the ratio of initial monomer feed composition at different stages of conversion could be obtained.     

二乙基二烯丙基氯化铵均聚及其与丙烯酰胺或丙烯酸共聚动力学研究

采用膨胀计法研究了以过硫酸铵为引发剂,二乙基二烯丙基氯化铵(DEDAAC)在水溶液中的均聚及其与丙烯酰胺(AM)和丙烯酸(AA)共聚动力学,测定了相应的聚合表观活化能;采用元素分析法测定了DEDAAC分别与AM和AA在低转化率下共聚物的组成,并采用氯离子选择性电极法测定了DEDAAC-AM共聚物中的氯离子含量,按Kelen-Tudos方法求得了相应的竞聚率.结果表明,DEDAAC均聚速率方程为RP=k[M]0.99[I]0.76,表观活化能Ea=77.00kJ/mol,说明链终止为单基终止和双基终止并存,引发过程与单体浓度无关;DEDAAC与AM在摩尔比为4∶1时,共聚动力学方程为RP=[M]2.53[I]0.90,表观活化能Ea=67.06kJ/mol,单体竞聚率为rDE=0.31±0.02、rAM=5.27±0.53;DEDAAC与AA在摩尔比为4∶1时,共聚动力学方程为RP=k[M]2.94[I]0.83,表观活化能Ea=70.07kJ/mol,竞聚率为rDE=0.28±0.03、rAA=5.15±0.28;DEDAAC与AM和AA等共聚为非理想共聚,得到的产物均为无规共聚物.     

全氟甲基乙烯基醚和其它含氟单体乳液共聚合的竞聚率测定

分别通过气相色谱法测定了全氟甲基乙烯基醚 (PMVE)与偏氟乙烯 (VDF)以及PMVE与四氟乙烯(TFE)二元乳液共聚反应中的气相单体组成和共聚物组成 ,然后用非线性回归法 (RREVM )计算得TFE PMVE及VDF PMVE乳液共聚合反应的表观竞聚率分别为γTFE =3 89和γPMVE =0 0 5以及γVDF =1 0 6和γPMVE =0 11.结合已经测定的TFE VDF二元乳液共聚的表观竞聚率 ,计算了由VDF TFE PMVE三元乳液共聚合反应合成的共聚物组成 ,后者与由1 9F NMR实测的共聚物组成吻合     

乳化剂对丙烯酰胺反相乳液共聚合的影响

丙烯酰亚胺乙酯基三甲基氯化铵;乳化剂;乳化剂对丙烯酰胺反相乳液共聚合的影响     

Termination Rates in Free Radical Copolymerizations

The rates of free radical copolymerizations at given rates of initiation can be analyzed ideally in terms of monomer feed concentrations and reactivity ratios, propagation rate constants for homopolymerizations of the particular monomers, and an overall rate constant for termination during copolymerization. This model, which is due to Atherton and North, can account for the effects of initiator concentration and viscosity of the polymerization medium on copolymerization rates.

This article reports an empirical formulation for the overall termination rate constant in terms of monomer concentrations and reactivity ratios and a cross-termination factor. The new model accounts for experimental data in the styrene-methyl methacrylate system in which polarity differences between unlike radicals may result in enhanced termination rates. It also predicts observed copolymerization rates of methyl methacrylate-vinyl acetate and styrene-α-methylstyrene mixtures in which polarity effects are absent. The cross-termination factor may be approximated from reactivity ratio data for predictive purposes.     

对苯乙烯磺酸钠聚合动力学及与丙烯酰胺共聚合的研究

采用膨胀计法研究了对苯乙烯磺酸钠(SSS)在水溶液中聚合动力学,确定了聚合速率方程,测定了聚合表观活化能,并研究了对苯乙烯磺酸钠与丙烯酰胺(AM )在水溶液中共聚合的动力学行为,利用聚电解质———共聚物P(SSS -co -AM)与阳离子表面活性剂N ,N ,N- 三甲基十六烷基溴化铵(CTAB)的复合作用,采用电导滴定法测定了共聚物的组成,从而测得了对苯乙烯磺酸钠与丙烯酰胺的竞聚率.研究结果表明,对苯乙烯磺酸钠聚合速率方程为RP =K[M]1 .0 [I]0 .53,说明链终止为双基终止方式,引发过程与单体浓度无关;聚合表观活化能为84 . 96kJ·mol- 1 ;采用Kelen Tudos方法,求得对苯乙烯磺酸钠(SSS)和丙烯酰胺(AM)两单体的竞聚率分别为rSSS =0 . 2 7,rAM =2 . 2 1;采用Alfrey Price经验规则估算了单体苯乙烯磺酸钠的Q、e值为QSSS=0 .2 2 ,eSSS=0 .4 6 .     

Kinetics of copolymerization—X: Investigation of the copolymerizations acrylonitrile with the sodium and ammonium salts of allyl sulphonic acid in dimethyl formamide solution

Sodium and ammonium salt of allyl sulphonic acid have the same characteristics in radical copolymerizations with acrylonitrile in dimethyl formamide solution. In these cases, the copolymer composition equation does not adequately describe the copolymerization process; this is manifested in the fact that the reactivity ratios change with the initial monomer ratio.     

四氟乙烯/偏氟乙烯乳液共聚反应的竞聚率测定

用亨利定律关联了四氟乙烯 (TFE) /偏氟乙烯 (VDF)乳液共聚合体系中的单体气相分压与其对应液相浓度间的关系 ,推导了用气相摩尔分数表示的共聚物组成方程式 .通过气相色谱和19F NMR分别测定了共聚反应前后气相单体组成和共聚物组成 ,用非线性回归法 (RREVM )计算TFE/VDF乳液共聚合反应表观竞聚率分别为γTFE=0 35和γVDF=0 6 3 .将实测的表观竞聚率代入共聚物组成方程计算共聚物组成与由19F NMR测定的结果一致 ,为进一步的工业放大试验提供科学依据     

Composition equation for matrix copolymerization

A mechanism of matrix copolymerization in which a monomer (or macroradical) is complexed by matrix was considered. For this case a composition equation was formulated. It was shown that in general case reactivity ratios are dependent on the matrix concentration. The influence of the critical length of a complexed radical on the process of copolymerization is also discussed. A series of copolymerizations of methacrylic acid and styrene were carried out using various compositions of initial monomer mixtures. The process was performed in benzene in the presence of poly(ethylene glycol) as a matrix. The copolymerization were carried out at various ratios of the monomer being complexed (methacrylic acid) to the matrix. Compositions of the complexes prepared were determined by the NMR method. Reactivity coefficients for both monomers were found and the results are discussed on the basis of the derived equation.     

Emulsion polymerization. VI. Concentration of monomers in latex particles

Nonpolymerizing latex particles surrounded by an aqueous phase saturated with monomer absorb only a finite amount of monomer, even if the monomer is a good solvent for the polymer, because the surface energy of each particle increases on swelling. At equilibrium the change in surface energy and the free energy of mixing exactly balance. Equations based on this thermodynamic principle predict with good accuracy the saturation swelling of crosslinked and uncrosslinked latex particles and the partitioning of monomer between the aqueous phase and latex particles at partial saturation. The available experimental data on swelling of latex polymers with monomers are reviewed. Earlier papers assumed that during emulsion polymerization the monomer concentration in the latex particles is independent of conversion as long as monomer droplets are present. This assumption is shown to be a justifiable approximation. The thermodynamics of the swelling of latex particles with a blend of two monomers is presented. The calculations indicate that copolymerization in emulsion should define reactivity ratios differing from those of homogeneous copolymerization by not more than 40% if the solubility of the comonomers in water is low. The reactivity ratio scheme is strictly applicable to emulsion copolymerization if the solvent properties of the two comonomers are identical.     

Kinetics and mechanism of the polymerization of styrene–acrylonitrile in the presence of polybutadiene

The mechanism of free radical grafting of styrene–acrylonitrile with polybutadiene was studied. By assuming a copolymerization mechanism an equation that related the amount of homopolymer formed and its molecular weight to a reactivity ratio and the charged ratio of monomer to polydiene was derived. Polymerizations that contained a variety of ratios of monomer to polybutadiene, two different catalysts, and variable amounts of a mercaptan modifier were studied. The weight fraction of homopolymer and its molecular weight were determined by high-speed GPC. The results were analyzed by the new equation and all showed a constant value of the reactivity ratio, which strongly suggests that the mechanism of the grafting reaction is copolymerization. Evidence that suggests that none of the grafting is a result of a hydrogen abstraction mechanism is also presented.     

Cationic Copolymerization with Depropagation. The Copolymerization of α-Methylstyrene and Styrene

ABSTRACT

To evaluate the existence of the depropagation reaction in the copolymerization of vinyl monomers, the cationic copolymerization of α-methylstyrene with styrene was studied. The copolymer composition exhibited an extensive dependency on the temperature of polymerization and the monomer concentration, this fact not being explained by the Mayo-Lewis equation. Treatment of the copolymerization in terms of the depropagation reaction led to an estimate of the monomer reactivity ratio and the equilibrium constant between the polymer and the monomer of α-methylstyrene. A comparison of the equilibrium constants thus obtained with those reported in the literature indicates that the magnitude of the equilibrium constants depends on the sequence length of α-methylstyrene units. By extrapolation to long sequence length, the equilibrium constants approach the values which are reported for high molecular weight poly(α-methylstyrene).     

Product Relation of Copolymerization Reactivity Ratios

The copolymerization reactivity ratios designated as r_i = k_ii/k_ij are characteristic of thermodynamic conditions, such as temperature, pressure, and concentration, in which the temperature dependence has been demonstrated by kinetic procedures [14]. It is noted that in radical copolymerization the simple product of the reactivity ratios, e.g., r₁, r₂ generally tends to move toward unity with increasing temperature [2] and that for ionic copolymerization it is usually close to unity [5]. Such an inclination, however, involves some ambiguity in evaluating all the reported data [6] concerning the polymerization conditions.     

Polymerization of α-amino acid N-carboxy anhydride. IX. Copolymerization of α-amino acid N-carboxy anhydride in heterogeneous system

Copolymerization of NCA's was undertaken in a heterogeneous system in acetonitrile, which is not a solvent of the polypeptides. The reactivity ratio was calculated by using the Lewis-Mayo equation. Further, the conversion rate in the copolymerization and the configuration of the copolymer produced were compared with those of the copolymerization in the homogeneous system in nitrobenzene, in which the copolypeptides are swollen. The rate of copolymerization in acetonitrile was between the rates of polymerization of the individual monomers. It has been reported that the configuration of the copolymer obtained in dimethylformamide, in which the copolypeptides are swollen, is of the block type. On the other hand, many polypeptides obtained in acetonitrile, which is not a solvent of the copolypeptides, had a random configuration near to an alternating configuration.     

Polymerization of vinylcyclopropanes. V. Radical copolymerization of 1, 1-dichloro-2-vinylcyclopropane with monosubstituted ethylenes

A peculiar copolymer composition equation applicable to the radical copolymerization of 1,1-dichloro-2-vinylcyclopropane with monosubstituted ethylenes was developed. The theory was applied to such ethylenes as methyl acrylate, methyl methacrylate, and styrene. The reactivity ratio parameters which give the best fit to the experimental data were determined.     

Determination of the reactivity parameters for the copolymerization of butyl acrylate with vinyl acetate

The composition of vinyl acetate–butyl acrylate copolymers obtained with batch emulsion polymerization have been studied by ¹H-NMR. Using the integrated copolymerization Meyer–Lowry equation, the apparent reactivity ratios of the two monomers were calculated as 10.67 for r₁, the reactivity ratio of butyl acrylate (BA), and 0.024 for r₂, the reactivity ratio of vinyl acetate (VAC). These results were compared with those obtained by other methods.     

Analysis of the linear methods for determining copolymerization reactivity ratios. II. A critical reexamination of cationic monomer reactivity ratios

A thorough examination of some cationic copolymerization systems by a new method has shown that many published r values have to be corrected significantly and that some are erroneous and meaningless, because for these systems the conventional copolymer compositions equation does not hold. Available information in regard of cationic copolymerizations has been treated in terms of three classes: (a) Systems in which the conventional copolymer composition equation adequately describes the copolymerization mechanism and previous authors justifiably used the two parameter model to calculate reactivity ratios. Our results show that the discrepancy between published r values and the more precise values obtained in this work is about ±23%. (b) Systems in which the approximations implicit in the conventional copolymer composition equation do not hold and the calculated r values are erroneous and misleading. Monomer pairs comprising monomers of significantly different reactivities belong to this class indicating that in copolymerizations in general and in cationic copolymerizations in particular a strong cast system exists, i.e., copolymerization can readily occur within the cast (between monomers of similar reactivities); however, only with difficulty if at all between casts (between monomers of differing reactivities). (c) Systems in which the use of the copolymer composition equation is completely unjustified, the calculated r values are meaningless and in some cases the existence of true copolymers is questioned.     

Recent studies on radical polymerization

Different aspects of radical polymerization have been investigated in the author&s laboratory. 1) Radical oligomerization has been studied by GC-MS and some kinetic parameters obtained in this way (chain transfer and reinitiation constants, reactivity ratios) compared with the results of classical experiments. 2) Star-shaped polymers have been obtained by using a series of polyfunctional chain transfer agents; the experimental results agree very well with the theoretical expectations. 3) A reexamination of the copolymerization equation showed that the steady-state assumption is not a necessary condition for the kinetic derivation and that all approaches are conceptually equivalent. 4) The structure and the 2D NMR spectra of hemiisotactic polypropylene obtained by radical inclusion polymerization are discussed.