Ionic Liquid for in situ Vis/NIR and Raman Spectroelectrochemistry: Doping of Carbon Nanostructures

1-butyl-3-methylimidazolium tetrafluoroborate (an ionic liquid) is an advantageous electrolyte for the study of charge-transfer reactions at single-walled carbon nanotubes (SWCNTs) and fullerene peapods (C₆₀@SWCNT). Compared to traditional electrolyte solutions, this medium offers a broader window of electrochemical potentials to be applied, and favorable optical properties for in situ Vis/NIR and Raman spectroelectrochemistry of nano-carbon species. The electrochemistry of both nanotubes and peapods is dominated by their capacitive double-layer charging. Vis/NIR spectroelectrochemistry confirms the charging-induced bleaching of transitions between Van Hove singularities. At high positive potentials, new optical transitions were activated in partly filled valence band. The bleaching of optical transitions is mirrored by the quenching of resonance Raman scattering in the region of tube-related modes. The Raman frequency of the tangential displacement mode of SWCNT shifts to blue upon both anodic and cathodic charging in the ionic liquid. The Raman modes of intratubular C₆₀ exhibit a considerable intensity increase upon anodic doping of peapods.     

Expanding the number of stable isomeric structures of the C80 cage: a new fullerene Dy3N@C80

The production, isolation, and spectroscopic characterization of a new Dy3N@C80 cluster fullerene that exhibits three isomers (1-3) is reported for the first time. In addition, the third isomer (3) forms a completely new C80 cage structure that has not been reported in any endohedral fullerenes so far. The isomeric structures of the Dy3N@C80 cluster fullerene were analyzed by studying HPLC retention behavior, laser desorption time-of-flight (LD-TOF) mass spectrometry, and UV-Vis-NIR and FTIR spectroscopy. The three isomers of Dy3N@C80 were all large band-gap (1.51, 1.33, and 1.31 eV for 1-3, respectively) materials, and could be classified as very stable fullerenes. According to results of FTIR spectroscopy, the Dy3N@C80 (I) (1) was assigned to the fullerene cage C80:7 (I(h)), whereas Dy3N@C80 (II) (2) had the cage structure of C80:6 (D(5h)). The most probable cage structure of Dy3N@C80 (III) (3) was proposed to be C80:1 (D(5d)). The significant differences between Dy3N@C80 and other reported M3N@C80 (M = Sc, Y, Gd, Tb, Ho, Er, Tm) cluster fullerenes are discussed in detail, and the strong influence of the metal on the nitride cluster fullerene formation is concluded.     

Two Positions of Potassium in Chemically Doped C(60) Peapods: An in situ Spectroelectrochemical Study

The state of doping of fullerene peapods C60@SWCNT treated with K vapor was studied by in situ Raman spectroelectrochemistry. For all samples under study, a heavy chemical n doping was proved by the vanishing of the radial breathing mode and the downshift of tangential displacement mode. The K-treated peapods remain partly doped even if they are exposed to humid air. The Ag(2) mode of intratubular fullerene in K-doped peapods in contact with air was still redshifted as referred to its position in pristine peapods. Potassium inserted into the peapods is the reason for the air-insensitive residual doping, which can be removed only by electrochemical oxidation. This indicates the presence of two positions of potassium in doped sample.     

Deviation from the planarity--a large Dy3N cluster encapsulated in an Ih-C80 cage: an X-ray crystallographic and vibrational spectroscopic study

The high-yield synthesis of Dy3N@C80 (I) opens the possibility of characterizing its molecular and vibrational structures. We report on the structure determination of Dy3N@C80 (I) by X-ray crystallographic study of single crystal of Dy3N@C80.Ni(OEP).2C6H6, revealing a nearly planar Dy3N cluster encapsulated in an Ih-C80 cage. The vibrational structure of Dy3N@C80 (I) is studied by Fourier transform infrared (FTIR) and Raman spectroscopy in combination with force-field calculations. A correlation was found between the antisymmetric metal-nitrogen stretching vibration and the structure of the M3N cluster of M3N@C80 (I) (M = Y, Gd, Tb, Dy, Ho, Er, Tm). Moreover, a stronger interaction between the encaged nitride cluster and the C80 carbon cage was found in the class II M3N@C80 (I) (M = Y, Gd, Tb, Dy, Ho, Er, Tm) than in Sc3N@C80 (I). This study demonstrates that the cluster size plays the dominating role in the structure of the M3N cluster in M3N@C80 (I).     

Charge-induced reversible rearrangement of endohedral fullerenes: electrochemistry of tridysprosium nitride clusterfullerenes Dy3N@C2n (2n=78, 80)

The electrochemistry of three new clusterfullerenes Dy3N@C2n (2n=78, 80), namely two isomers of Dy3N@C80 (I and II) as well as Dy3N@C78 (II), have been studied systematically including their redox-reaction mechanism. The cyclic voltammogram of Dy3N@C80 (I) (Ih) exhibits two electrochemically irreversible but chemically reversible reduction steps and one reversible oxidation step. Such a redox pattern is quite different from that of Sc3N@C80 (I), and this can be understood by considering the difference in the charge transfer from the encaged cluster to the cage. A double-square reaction scheme is proposed to explain the observed redox-reaction behavior, which involves the charge-induced reversible rearrangement of the Dy3N@C80 (I) monoanion. The first oxidation potential of Dy3N@C80 (II) (D5h) has a negative shift of 290 mV relative to that of Dy3N@C80 (I) (Ih), indicating that lowering the molecular symmetry of the clusterfullerene cage results in a prominent increase in the electron-donating property. The first and second reduction potentials of Dy3N@C78 (II) are negatively shifted relative to those of Dy3N@C80 (I, II), pointing to the former's lowered electron-accepting ability. The significant difference in the electrochemical energy gaps of Dy3N@C80 (I), Dy3N@C80 (II), and Dy3N@C78 (II) is consistent with the difference in their optical energy gaps.     

Crystallographic characterization and structural analysis of the first organic functionalization product of the endohedral fullerene Sc(3)N@C(80)

The structure of Sc3N@C80-C10H12O2, a Diels-Alder cycloadduct of Sc3N@C80, has been determined. The crystallographic data shows that cycloaddition occurs at a C-C bond of 6:5 ring junction, and that the fullerene C1-C2 bond is elongated and pulled out from the fullerene. The Sc3N unit is well-ordered within the C80 cage and positioned away from the site of addition. The proximity of the Sc atoms to the cage carbon atoms causes those carbon atoms to protrude slightly from the surface of the fullerene cage.     

Doping of C60 fullerene peapods with lithium vapor: Raman spectroscopic and spectroelectrochemical studies

Raman spectroscopy and in situ Raman spectroelectrochemistry have been applied to the study of the lithium vapor doping of C60@SWCNTs (peapods; SWCNT=single-walled carbon nanotube). A strong degree of doping was proven by the disappearance of the radial breathing mode (RBM) of the SWCNTs and by the attenuation of the tangential (TG) band intensity by two orders of magnitude. The lithium doping causes a downshift of the Ag(2) mode of the intratubular C60 by 27 cm(-1) and changes the resonance condition of the encapsulated fullerene. In contrast to potassium vapor doping, the strong downshift of the TG band was not observed for lithium doping. The peapods treated with lithium vapor remained partially doped even when they were exposed to humid air. This was reflected by a reduction in the intensity of the nanotube and the fullerene modes and by the change in the shape of the RBM band compared with that of the undoped sample. The Ag(2) mode of the intratubular fullerene was not resolved after contact of the lithium-doped sample with water. Lithium insertion into the interior of a peapod and its strong interaction with the intratubular fullerene is suggested to be responsible for the air-insensitive residual doping. This residual doping was confirmed by in situ spectroelectrochemical measurements. The TG band of the lithium-doped peapods did not undergo an upshift during the anodic doping, which points to the formation of a stable exohedral metallofullerene peapod.     

The electronic and vibrational structure of endohedral Tm3N@C80 (I) fullerene--proof of an encaged Tm3+

The electronic and vibrational structure of the nitride clusterfullerene Tm3N@C80 (I) was investigated by cyclic voltammetry, FTIR, Raman, and X-ray photoemission spectroscopy. The electrochemical energy gap of Tm3N@C80 (I) is 1.99 V, which is 0.13 V larger than that of Sc3N@C80 (I). FTIR spectroscopy showed that the C80:7 (I(h)) cages in Tm3N@C80 (I), Er3N@C80 (I), Ho3N@C80 (I), Tb3N@C80 (I), Gd3N@C80 (I), and Y3N@C80 (I) have the same bond order. The analysis of low-energy Raman spectra points to two uniform force constants which can be used to describe the interaction between the encaged nitride cluster and the C80:7 (I(h)) cage in M3N@C80 (I) (M = Tm, Er, Ho, Tb, Gd, and Y). Because the M3N-C80 bond strength is strongly dependent on the charge of the metal ions, this is a direct hint for a 3+ formal valence state of the metal ions in these nitride clusterfullerene series, including Tm3N@C80 (I). Photoemission spectra of the Tm 4d core level and the Tm 4f valence electrons provided a direct proof for a (4f)12 electronic configuration of the encapsulated thulium. In conclusion, thulium in Tm3N@C80 (I) has a formal electronic ground state of +3, in contrast to the +2 state found in Tm@C82. It is demonstrated that the valence state of metal atoms encaged in fullerenes can be controlled by the chemical composition of the endohedral fullerene.     

Sexithiophene Encapsulated in a Single‐Walled Carbon Nanotube: An In Situ Raman Spectroelectrochemical Study of a Peapod Structure

The interaction of single‐walled carbon nanotubes (SWCNTs) and α‐sexithiophene (6T) was studied by Raman spectroscopy and by in situ Raman spectroelectrochemistry. The encapsulation of 6T in SWCNT and its interaction causes a bleaching of its photoluminescence, and also small shifts of its Raman bands. The Raman features of the SWCNT with embedded 6T (6T‐peapods) change in both intensity and frequency compared to those of pristine SWCNT, which is a consequence of a change of the resonant condition. Electrochemical doping demonstrated that the electrode potential applied to the SWCNT wall causes changes in the embedded 6T. The effects of electrochemical charging on the Raman features of pristine SWCNT and 6T@SWCNT were compared. It is shown that the interaction of SWCNT with 6T also changes the electronic structure of SWCNT in its charged state. This change of electronic structure is demonstrated both for semiconducting and metallic tubes.     

The role of an asymmetric nitride cluster on a fullerene cage: the non-IPR endohedral DySc2N@C76

The first non-IPR C(76) cage based on a mixed metal nitride cluster, DySc(2)N@C(76), was successfully synthesized and isolated. DySc(2)N@C(76) is a stable fullerene with a small band gap of 0.96 eV. According to the FTIR spectroscopic study in combination with extensive DFT calculations, the cage structure of DySc(2)N@C(76) has been assigned to the non-IPR C(s): 17490-I isomer having two pairs of the adjacent pentagons. DySc(2)N@C(76)provides the first example of stabilization of the non-IPR C(76) cage by encapsulation of an asymmetric DySc(2)N mixed cluster, revealing the role of the cluster structure on the stability of the fullerene cage. As the asymmetric DySc(2)N cluster has a more suitable geometry for the inner space of the C(76) cage compared to that of the homogeneous clusters like Sc(3)N or Dy(3)N, the highest yield for C(76)-based cluster fullerenes with the Dy(x)Sc(3)-(x)N mixed nitride cluster is achieved for the DySc(2)N@C(76)     

A large family of dysprosium-based trimetallic nitride endohedral fullerenes: Dy3N@C2n (39 </= n </= 44)

Dysprosium-based trimetallic nitride endohedral fullerenes (clusterfullerenes)-the Dy(3)N@C(2)(n) (38 相似文献   

Effect of copper metal on the yield of Sc3N@C80 metallofullerenes

The yield of Sc3N@C80 metallofullerene and fullerene extract is dramatically increased via filling cored graphite rods with copper and Sc2O3 only; when compared to 100% Sc2O3 packed rods, improvements of factors of approximately 3 and approximately 5 have been achieved for Sc3N@C80 and fullerene extract produced, respectively, with the weight percent of Cu added to the rod affecting the type and amount of fullerene produced.     

Spectroelectrochemistry of carbon nanostructures.

This review is focused on charge-transfer reactions at carbon nanotubes and fullerenes. The spectroelectrochemistry of fullerenes deals with the spin states of fullerenes, the role of mono-anions and the reactivity of higher charged states in C60. The optical (Vis-NIR) spectroelectrochemistry of single-walled carbon nanotubes (SWNTs) follows changes in the allowed optical transitions among the Van Hove singularities. The Raman spectroelectrochemistry of SWNT benefits from strong resonance enhancement of the Raman scattering. Here, both semiconducting and metallic SWNTs are analyzed using the radial breathing mode (RBM) and G-modes as well as the second order (D, G') and intermediate frequency modes. Raman spectroelectrochemistry of SWNT allows the addressing of index-identified tubes and even single isolated nanotubes. Optical and Raman spectroelectrochemistry of fullerene peapods, C60@SWNT and C70@SWNT indicates effective shielding of the intratubular fullerene (peas). The most striking effect in the spectroelectrochemistry of peapods is the so-called "anodic Raman enhancement" of intratubular C60. Double-walled carbon nanotubes (DWNTs) give a specific spectroscopic response in Vis-NIR spectroelectrochemistry for the inner and the outer tube. They are better distinguishable by Raman spectroelectrochemistry which allows a precise tracing of the specific doping response of outer/inner tubes.     

Synthesis, isolation, and spectroscopic characterization of holmium-based mixed-metal nitride clusterfullerenes: HoxSc3-xN@C80 (x=1, 2)

The synthesis, isolation and spectroscopic characterization of holmium-based mixed metal nitride clusterfullerenes Ho(x) Sc(3-x) N@C(80) (x=1, 2) are reported. Two isomers of Ho(x) Sc(3-x) N@C(80) (x=1, 2) were synthesized by the reactive gas atmosphere method and isolated by multistep recycling HPLC. The isomeric structures of Ho(x) Sc(3-x) N@C(80) (x=1, 2) were characterized by laser-desorption time-of-flight (LD-TOF) mass spectrometry and UV/Vis/NIR, FTIR and Raman spectroscopy. A comparative study of M(x) Sc(3-x) N@C(80) (M=Gd, Dy, Lu, Ho) demonstrates the dependence of their electronic and vibrational properties on the encaged metal. Despite the distinct perturbation induced by 4f(10) electrons, we report the first paramagnetic (13) C?NMR study on Ho(x) Sc(3-x) N@C(80) (I; x=1, 2) and confirm I(h) -symmetric cage structure. A (45) Sc NMR study on HoSc(2) N@C(80) (I, II) revealed a temperature-dependent chemical shift in the temperature range of 268-308?K.     

Manganese(III)-catalyzed free radical reactions on trimetallic nitride endohedral metallofullerenes

The first reactions of trimetallic nitride templated endohedral metallofullerenes (TNT EMFs) with carbon radicals generated from diethyl malonate catalyzed by manganese(III) acetate are reported. Two methano monoadducts, Sc3N@C80-A and Sc3N@C80-B, were isolated and characterized. Sc3N@C80-A contains two ester moieties, whereas Sc3N@C80-B contains only one ester group and a hydrogen atom on the central carbon of the addend. NMR spectroscopy of the two monoadducts suggests that the addition occurs regioselectively at a 6,6-ring juncture on the surface of the icosahedrally (Ih) symmetric Sc3N@C80, forming the first 6,6-ring-bridged methano Ih Sc3N@C80 derivatives. The measured 1J(C,H) = 147 Hz for the methano carbon with its hydrogen in monoadduct Sc3N@C80-B nearly perfectly matches the data for pi-homoaromatic systems, indicating an open [6,6]-methano structure. Geometry optimization also found that the "closed" [6,6]-methano structures were energetically unstable and always led to the open forms. Thus, an "open" [6,6]-methanofulleride structure is proposed, which was induced by the norcaradiene rearrangement, resulting in the cleavage of the cyclopropane ring and the formation of energetically stable open cage fullerene derivatives. These are the first examples of thermodynamically stable adducts of the "open" type at the 6,6-ring juncture of Ih Sc3N@C80, differing greatly from the "closed" 5,6-ring juncture adducts reported previously. In addition, bis-, tri-, and up to octaadducts of Sc3N@C80 were detected by matrix-assisted laser desorption ionization time-of-flight mass spectrometry; this synthetic method was also applied to Lu3N@C80, producing adducts with up to 10 substituents on the carbon cage. These are the highest levels of substitution of TNT metallofullerenes reported so far.     

Preparation and crystallographic characterization of a new endohedral,Lu3N@C80.5 (o-xylene), and comparison with Sc3N@C80.5 (o-xylene)

The trimetallic nitride template (TNT) approach has been successfully utilized to prepare the new endohedral Lu(3)N@C(80). Well-ordered crystals of Lu(3)N@C(80).5 (o-xylene) and Sc(3)N@C(80).5 (o-xylene) form upon cooling of o-xylene solutions of these endohedrals and they are isomorphous. Although the positions of the fullerene cage (which is fully ordered and located at a crystallographic center of symmetry) and the o-xylene molecules are nearly identical in these two structures, the positioning of the metal ions in the two crystals differ in significant ways. However, the expected difference in sizes of lutetium and scandium does not affect the dimensions of the C(80) cage. Nevertheless, the positions of the metal atoms do produce a slight outward dislocation of the immediately adjacent carbon atoms.     

Lanthanum nitride endohedral fullerenes La3N@C2n (43 <or= n <or= 55): preferential formation of La3N@C96

While the trimetallic nitrides of Sc, Y and the lanthanides between Gd and Lu preferentially template C(80) cages, M(3)N@C(80), and while those of Ce, Pr and Nd preferentially template the C(88) cage, M(3)N@C(88), we show herein that the largest metallic nitride cluster, La(3)N, preferentially leads to the formation of La(3)N@C(96) and to a lesser extent the La(3)N@C(88). This is the first time that La(3)N is successfully encapsulated inside fullerene cages. La(3)N@C(2n) metallofullerenes were synthesized by arcing packed graphite rods in a modified Kr?tschmer-Huffman arc reactor, extracted from the collected soot and identified by mass spectroscopy. They were isolated and purified by high performance liquid chromatography (HPLC). Different arcing conditions were studied to maximize fullerene production, and results showed that yields have a high La(2)O(3)/C dependence. Relatively high yields were obtained when a 1:5 ratio was used. Three main fractions, La(3)N@C(88), La(3)N@C(92), and La(3)N@C(96), were characterized by UV/Vis-NIR and cyclic voltammetry. Unlike other trimetallic nitride metallofullerenes of the same carbon cage size, La(3)N@C(88) exhibits a higher HOMO-LUMO gap and irreversible reduction and oxidation steps.     

Structure, stability, and cluster-cage interactions in nitride clusterfullerenes M3N@C2n (M = Sc, Y; 2n = 68-98): a density functional theory study

Extensive semiempirical calculations of the hexaanions of IPR (isolated pentagon rule) and non-IPR isomers of C(68)-C(88) and IPR isomers of C(90)-C(98) followed by DFT calculations of the lowest energy structures were performed to find the carbon cages that can provide the most stable isomers of M(3)N@C(2n) clusterfullerenes (M = Sc, Y) with Y as a model for rare earth ions. DFT calculations of isomers of M(3)N@C(2n) (M = Sc, Y; 2n = 68-98) based on the most stable C(2n)(6-) cages were also performed. The lowest energy isomers found by this methodology for Sc(3)N@C(68), Sc(3)N@C(78), Sc(3)N@C(80), Y(3)N@C(78), Y(3)N@C(80), Y(3)N@C(84), Y(3)N@C(86), and Y(3)N@C(88) are those that have been shown to exist by single-crystal X-ray studies as Sc(3)N@C(2n) (2n = 68, 78, 80), Dy(3)N@C(80), and Tb(3)N@C(2n) (2n = 80, 84, 86, 88) clusterfullerenes. Reassignment of the carbon cage of Sc(2)@C(76) to the non-IPR Cs: 17490 isomer is also proposed. The stability of nitride clusterfullerenes was found to correlate well with the stability of the empty 6-fold charged cages. However, the dimensions of the cage in terms of its ability to encapsulate M(3)N clusters were also found to be an important factor, especially for the medium size cages and the large Y(3)N cluster. In some cases the most stable structures are based on the different cage isomers for Sc(3)N and Y(3)N clusters. Up to the cage size of C(84), non-IPR isomers of C(2n)(6-) and M(3)N@C(2n) were found to compete with or to be even more stable than IPR isomers. However, the number of adjacent pentagon pairs in the most stable non-IPR isomers decreases as cage size increases: the most stable M(3)N@C(2n) isomers have three such pairs for 2n = 68-72, two pairs for n = 74-80, and only one pair for n = 82, 84. For C(86) and C(88) the lowest energy IPR isomers are much more stable than any non-IPR isomer. The trends in the stability of the fullerene isomers and the cluster-cage binding energies are discussed, and general rules for stability of clusterfullerenes are established. Finally, the high yield of M(3)N@C(80) (Ih) clusterfullerenes for any metal is explained by the exceptional stability of the C(80)(6-) (Ih: 31924) cage, rationalized by the optimum distribution of the pentagons leading to the minimization of the steric strain, and structural similarities of C(80) (Ih: 31924) with the lowest energy non-IPR isomers of C(760(6-), C(78)(6-), C(82)(6-), and C(84)(6-) pointed out.     

Vibrational structure of endohedral fullerene Sc3N@C78 (D3h'): evidence for a strong coupling between the Sc3N cluster and C78 cage.

The vibrational structure of the endohedral cluster fullerene Sc(3)N@C(78) is studied by FTIR spectroscopy, Raman spectroscopy and DFT-based quantum chemical calculations. Remarkably good agreement between experimental and calculated spectra is achieved and a full assignment of the Sc(3)N-based vibrational modes is given. Significant differences in the vibrational structure of the endohedral cluster fullerene Sc(3)N@C(78) and the empty, charged C(78) (6-): 5 (D(3h)') are rationalized by the strong coupling between the Sc(3)N cluster and the fullerene cage. This coupling has its origin in a significant overlap of the Sc(3)N and C(78) molecular orbitals, and causes atomic-charge and bond-length redistributions compared to the neutral C(78) and the C(78) (6-) anion. An ionic model is not sufficient to describe the electronic, geometric and vibrational structure of the Sc(3)N@C(78) nitride cluster fullerene.     

Complexation of Sc3N@C80 endohedral fullerene with cyclic Zn-bisporphyrins: solid state and solution studies

We report the synthesis of two cyclic β-pyrrole unsubstituted meso-tetraphenyl bisporphyrins in which the porphyrin units are connected by two 2,3-hexadiynyl-1,6-dioxo or two hexyl-1,6-dioxo spacers, respectively. Both cyclic porphyrin dimers exist in solution as mixtures of two conformational isomers. In the solid state, the receptor with diynyl spacers forms a 1:1 complex with the icosahedral (I(h)) isomer of the trimetallic nitride endohedral fullerene Sc(3)N@C(80). In this complex the receptor adopts a scoop-shaped conformation having a dihedral angle of 87.25° between the two porphyrin planes. The hexyl spaced analogue, however, adopts a similar conformation upon encapsulation of one molecule of Sc(3)N@C(80) in a self-assembled dimeric capsule. The capsular complexes pack in columns and render the fullerene units completely isolated. In toluene solution, (1)H NMR experiments indicate that the endohedral fullerene Sc(3)N@C(80) is exclusively bound by the expanded isomer of both dimers. UV-vis and fluorescence titration experiments confirmed the existence of strong π-π interactions between the fullerene Sc(3)N@C(80) and the flexible bisporphyrin dimer with hexyl spacers. At micromolar concentration, the flexible receptor forms only a 1:1 complex with the endohedral fullerene with stability constant value of K(a) = 2.6 ± 0.3 × 10(5) M(-1).