Ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene ligands: synthesis, structure, and catalytic activity

A series of ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene (NHC) ligands has been prepared and fully characterized. These complexes are readily accessible in one or two steps from commercially available [(PCy(3))(2)Cl(2)Ru==CHPh]. All of the complexes reported herein promote the ring-closing of diethyldiallyl and diethylallylmethallyl malonate, the ring-opening metathesis polymerization of 1,5-cyclooctadiene, and the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, in some cases surpassing in efficiency the existing second-generation catalysts. Especially in the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, all new catalysts demonstrate similar or higher activity than the second-generation ruthenium catalysts and, most importantly, afford improved E/Z ratios of the desired cross-product at conversion above 60 %. The influence of the unsymmetrical NHC ligands on the initiation rate and the activation parameters for the irreversible reaction of these ruthenium complexes with butyl vinyl ether were also studied. Finally, the synthesis of the related chlorodicarbonyl(carbene) rhodium(I) complexes allowed for the study of the electronic properties of the new unsymmetrical NHC ligands that are discussed in detail.     

Aminocarbonyl group containing Hoveyda-Grubbs-type complexes: synthesis and activity in olefin metathesis transformations

Three novel "boomerang" precatalysts bearing different aminocarbonyl functions are reported. Comparative kinetic studies show that this functional group allows for a control of the catalytic activity in metathesis transformations. The scope of the more active catalyst is investigated and shows a good tolerance to various substrates in ring-closing metathesis, enyne metathesis, and cross metathesis. ICP-MS analyses illustrate the good affinity of this catalyst for silica gel, as levels of Ru contamination lower than 6 ppm are detected in the final products.     

MTO Schiff-base complexes: synthesis, structures and catalytic applications in olefin epoxidation

Several Schiff-base ligands readily form complexes with methyltrioxorhenium(VII) (MTO) by undergoing a hydrogen transfer from a ligand-bound OH group to a ligand N atom. The resulting complexes are stable at room temperature and can be handled and stored in air without problems. Due to the steric demands of the ligands they display distorted trigonal-bipyramidal structures in the solid state, as shown by X-ray crystallography, with the O(-) moiety binding to the Lewis acidic Re atom and the Re-bound methyl group being located either in cis or trans position to the Schiff base. In solution, however, the steric differences seem not to be maintained, as can be deduced from (17)O NMR spectroscopy. Furthermore, the Schiff-base ligands exchange with donor ligands. Nevertheless, the catalytic behaviour is influenced significantly by the Schiff bases coordinated to the MTO moiety, which lead either to high selectivities and good activities or to catalyst decomposition. A large excess of ligand, in contrast to the observations with aromatic N-donor ligands, is detrimental to the catalytic performance as it leads to catalyst decomposition.     

Synthesis,structure, and activity of enhanced initiators for olefin metathesis

A series of ruthenium olefin metathesis catalysts of the general structure (H(2)IMes)(PR(3))(Cl)(2)Ru=CHPh (H(2)IMes = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) have been prepared; these complexes are readily accessible in two steps from commercially available (H(2)IMes)(PCy(3))(Cl)(2)Ru=CHPh. Their phosphine dissociation rate constants (k(1)), relative rates of phosphine reassociation, and relative reaction rates in ring-opening metathesis polymerization (ROMP) and ring-closing metathesis (RCM) have been investigated. The rates of phosphine dissociation (initiation) from these complexes increase with decreasing phosphine donor strength. Complexes containing a triarylphosphine exhibit dramatically improved initiation relative to (H(2)IMes)(PCy(3))(Cl)(2)Ru=CHPh. Conversely, phosphine reassociation shows no direct correlation with phosphine electronics. In general, increased phosphine dissociation leads to faster olefin metathesis reaction rates, which is of direct significance to both organic and polymer metathesis processes.     

Novel imidazolium ion-tagged Ru-carbene complexes: synthesis and applications for olefin metathesis in ionic liquid

Novel Hoveyda-type Ru-carbene complexes 7a,b and 8a,b tethering imidazolium tags at chelating isopropoxy group have been synthesized, and investigated their catalytic activities and recyclabilities in ring-closing metathesis (RCM) and cross metathesis (CM) in ionic liquids. They showed excellent catalytic activities for RCM of various dienes in [bmim][PF₆]/CH₂Cl₂ (1/1, v/v). The recyclability of these catalysts is largely dependent on the tether length and the structures of imidazolium tag and ionic liquid, as well as the composition of the ionic solvent system. A combination of the 2-methylated imidazolium ion-tagged Ru-complex 7b with a mixture of [bdmim][PF₆]/toluene (1/3, v/v) allowed several times recycling without significant loss of catalytic activity in RCM, however low recyclabilities were observed in CMs.     

Monolayer protected Au cluster (MPC)-bound Ru-carbene complex: synthesis and its catalytic activity in ring-closing olefin metathesis

Monolayer-protected gold cluster (Au-MPC)-bound Ru-carbene complex (MPC-7) has been synthesized and examined its catalytic activity in ring-closing olefin metathesis. The MPC-7 showed almost the same catalytic activity with that of simple molecules (Grubbs Ru-complex 1b and the thioacetate-functionalized Ru-complex 8) and reused several times.     

Phosphabicyclononane-containing ru complexes: efficient pre-catalysts for olefin metathesis reactions

The catalytic performances of three Phosphabicyclononane (Phoban)-containing ruthenium-based pre-catalysts have been evaluated for metathesis transformations. A wide screening of substrates in ring-closing metathesis reactions reveals the greater efficiency of pre-catalyst 4. Comparison of the catalytic activities of 4 with Grubbs' first-generation pre-catalyst illustrates the key role of the Phoban ligand. Additionally, a comparative study of three Phoban-containing pre-catalysts has been conducted for the self-metathesis of 1-octene at low catalyst loading (25-100 ppm).     

Access to multinuclear salen complexes using olefin metathesis

The use of olefin metathesis as a construction tool for multimetallic salen-based structures is described. The approach involves mono- and diallyl-functionalized metallosalen complexes that can be directly coupled by metathesis leading to dimetallic species or mixtures of linear and cyclic oligomers. The metathesis of bis-allyl Ni(salen) complexes has been studied in detail. At high concentration it is possible to selectively obtain di-Ni species rather than heavier oligomers while under dilute conditions cyclic rather than linear oligomers are preferentially obtained. A mono-allyl Zn(salphen) complex was efficiently coupled using metathesis to give the di-Zn(salphen) product, which was subsequently transmetalated with a variety of metals to yield dimetallic salens of potential catalytic interest. Finally, a tetranuclear Zn(4) macrocycle was also prepared using buildings blocks obtained by metathesis from commercially available precursors. The methods described herein allow for the facile construction of multi-centered Schiff base complexes of catalytic or supramolecular interest.     

Mono N,C,N-pincer complexes of titanium, vanadium and niobium. Synthesis, structure and catalytic activity in olefin polymerisation

Transmetallation of 4,4'-bis{(2,6-bis[(dimethylamino)methyl]phenylgold)diphenyl-phosphino}biphenyl (3) with MCl(4) (M = Ti, NbCl, V) in benzene gave the corresponding transition metal pincer complexes (4) and insoluble 4,4'-bis[P-(chloro gold(I))diphenylphosphino]biphenyl (2), which can be quantitatively recovered and recycled. Interestingly, 3 did not react with TiCl(3). However, reaction of 2,6-bis[(dimethylamino)methyl]phenyllithium (1) with TiCl(3) resulted in formation of the novel diaryltitanium(IV) compound 5 (16% yield), comprising one N,C,N-mer bound NCN-pincer ligand and a second NCN-pincer ligand that is rearranged from a 1,2,6-isomer to a 1,2,4 one. The latter NCN-ligand is dianionic and is bidentate bonded; one of the CH(2)NMe(2) substituents (para to C'(ipso)) is non-coordinated, while the second CH(2)NMe(2) group, after C-H activation of one of the Me groups, is η(2)-C,N-bonded to the titanium centre trans to C(ipso) of the mer-NCN ligand. The new NCN-pincer metal complexes 2,6-bis[(dimethylamino)methyl]phenylTiCl(3) (4a) and 2,6-bis[(dimethylamino)methyl]-phenylVCl(2) (4d) gave, after immobilization on MgCl(2)-based supports, very high activity in ethene polymerisation.     

Novel metathesis catalysts based on ruthenium 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidenes: synthesis, structure, immobilization, and catalytic activity

The synthesis of novel ruthenium-based metathesis catalysts containing the saturated 1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene ligand, that is, [RuCl2(NHC)[=CH-2-(2-PrO)-5-NO(2)-C6H3]] (1) and [Ru(CF3COO)2(NHC)[=CH-2-(2-PrO)-5-NO2-C6H3]] (2) (NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) is described. Both catalysts are highly active in ring-closing metathesis (RCM) and ring-opening cross-metathesis (ROCM). Compound 1 shows moderate activity in enyne metathesis. Compound 2 is not applicable to enyne metathesis since it shows high activity in the cyclopolymerization of diethyl dipropargylmalonate (DEDPM). Poly(DEDPM) prepared by the action of 2 consists of 95% five-membered rings, that is, poly(cyclopent-1-enevinylene)s, and 5 % of six-membered rings, that is, poly(cyclohex-1-ene-3-methylidene)s. The polymerization proceeds in a nonliving manner and results in polyenes with broad polydispersities (1.9< or =PDI< or =2.3). Supported analogues of 2 were prepared by immobilization on hydroxymethyl-Merrifield resin and a monolithic support derived from ring-opening-metathesis polymerization (ROMP). Catalyst loadings of 1 and 2.5%, respectively, were obtained. Both supported versions of 2 showed excellent reactivity. With 0.24-2% of the supported catalysts, yields in RCM and ROCM were in the range of 76-100%. Leaching of ruthenium was low and resulted in Ru contaminations of the products of less than 0.000014% (0.14 ppm).     

Molybdenum oxo-imido aryloxide complexes: oxo analogues of olefin metathesis catalysts

The novel 16-electron molybdenum oxo-imido bis(aryloxide) complexes [Mo(NtBu)(O)(2,6-Me2C6H3O)2(py)] (1) and [Mo(NtBu)(O)(2,6-iPr2C6H3O)2(py)] (2) have been prepared by the salt elimination reactions of [Mo(NtBu)(O)Cl2(DME)] with the appropriate lithium aryloxide and from the cycloaddition reactions of tert-butyl isocyanate with the appropriate molybdenum dioxo bis(aryloxide) complex [Mo(O)2(OAr)2(py)n]. Complexes 1 and 2 are the first isolable and crystallographically characterized molybdenum oxo-imido aryloxide complexes. The geometry around the metal in complexes 1 and 2 is best described as a distorted trigonal bipyramid, with the imido and pyridine ligands occupying the axial positions and the oxo and aryloxide ligands in the equatorial plane. X-ray and IR data have confirmed that the imido ligand is the dominant pi donor in the complexes, resulting in an Mo-O bond order of less than 2.5. Reaction of [Mo(NtBu)(O)Cl2(DME)] with Li(OCH2tBu) instead gave the novel complex [Mo(NtBu)(OCH2tBu)3Cl(py)] (3).     

Dynamic combinatorial olefin metathesis: templated synthesis of porphyrin boxes

A porphyrin macrocyclic square is efficiently prepared by a dynamic combinatorial approach to olefin metathesis and shown by scanning tunneling microscopy (STM) to self-assemble into highly ordered arrays on a graphite surface.     

Chiral Ru-based complexes for asymmetric olefin metathesis: enhancement of catalyst activity through steric and electronic modifications

Design, synthesis, characterization, and catalytic activity of six enantiomerically pure Ru-based metathesis catalysts are disclosed (3a-3f). The new chiral catalysts were prepared through steric and electronic alterations of the parent catalyst system (3). The present studies indicate that the effect of structural modifications of chiral complex 3 does not always correspond to those of the related achiral complexes. The present findings illustrate that modified Ru complexes (3e and 3f) deliver reactivity levels that are more than 2 orders of magnitude higher than 3. Reactivity and physical data are provided that shed light on the origin of activity differences. Some members of the new generation of chiral Ru catalysts promote asymmetric ring-opening (AROM) and ring-closing (ARCM) metatheses that cannot be effected by the first generation chiral catalyst (3).     

Unprecedented ROMP activity of low-valent rhenium-nitrosyl complexes: Mechanistic evaluation of an electrophilic olefin metathesis system

The reaction of [Re(H)(NO)2(PR3)2] complexes (1 a: R = PCy3; 1 b: R = PiPr3) with [H(OEt2)2][BAr(F)4] ([BAr(F)4] = tetrakis{3,5-bis(trifluoromethyl)phenyl}borate) in benzene at room temperature gave the corresponding cations [Re(NO)2(PR3)2][BAr(F)4] (2 a and 2 b). The addition of phenyldiazomethane to benzene solutions of 2 a and 2 b afforded the moderately stable cationic rhenium(I)-benzylidene-dinitrosyl-bis(trialkyl)phosphine complexes 3 a and 3 b as [BAr(F)4]- salts in good yields. The complexes 2 a and 2 b catalyze the ring-opening metathesis polymerization (ROMP) of highly strained nonfunctionalized cyclic olefins to give polymers with relatively high polydispersity indices, high molecular weights and over 80 % Z configuration of the double bonds in the chain backbone. However, these complexes do not show metathesis activity with acyclic olefins. The benzylidene derivatives 3 a and 3 b are almost inactive in ROMP catalysis with norbornene and in olefin metathesis. NMR experiments gave the first hints of the initial formation of carbene complexes from [Re(NO)2(PR3)2][BAr(F)4] (2 a and 2 b) and norbornene. In a detailed mechanistic study ESI-MS/MS measurements provided further evidence that the carbene formation is initiated by a unique reaction sequence where the cleavage of the strained olefinic bond starts with phosphine migration forming a cyclic ylide-carbene complex, capable of undergoing metathesis with alternating rhenacyclobutane formation and cycloreversion reactions ("ylide" route). However, even at an early stage the ROMP propagation route is expected to merge into an "iminate" route by attack by the ylide function on one of the N(NO) atoms followed by phosphine oxide elimination. The formation of phosphine oxide was confirmed by NMR spectroscopy. The proposed mechanism is supported further by detailed DFT calculations.     

Ansa-bridged eta5-cyclopentadienyl molybdenum and tungsten complexes: synthesis, structure and application in olefin epoxidation

Ansa-bridged eta(5)-cyclopentadienyl molybdenum and tungsten tricarbonyl complexes of formula [M(eta(5)-C(5)H(4)(CH(2))(3)-eta(1)-CH(2))(CO)(3)] (M=Mo or W) were synthesized and the X-ray crystal structure of the tungsten complex is reported. In the epoxidation of cyclooctene the molybdenum compound shows a high catalytic activity, approaching the observed activities for the most reactive unbridged complexes of composition CpMo(CO)(3)X (X=Cl, CH(3)). The activity of the tungsten complex is also amongst the highest catalytic activities for the olefinic epoxidation of complexes with the composition CpW(CO)(3)X and WO(2)X(2)L(2), reported so far. The low ring strain of the ansa-bridged system improves the stability of the complexes under oxidative conditions considerably in comparison to derivatives with a shorter bridge and therefore paves the way to introduction of chirality in these systems.     

Copper(II) complexes of pyridyl-appended diazacycloalkanes: synthesis, characterization, and application to catalytic olefin aziridination

As part of an ongoing effort to rationally design new copper catalysts for olefin aziridination, a family of copper(II) complexes derived from new tetradentate macrocyclic ligands are synthesized, characterized both in the solid state and in solution, and screened for catalytic nitrene transfer reactivity with a representative set of olefins. The pyridylmethyl-appended diazacycloalkane ligands L6(py)2, L7(py)2, and L8(py)2 are prepared by alkylation of the appropriate diazacycloalkane (piperazine, homopiperazine, or diazacyclooctane) with picolyl chloride in the presence of triethylamine. The ligands are metalated with Cu(ClO4)(2).6H2O to provide the complexes [(L6(py)2)Cu(OClO3)]ClO4 (1), [(L7(py)2)Cu(OClO3)]ClO4 (2), and [(L8(py)2)Cu](ClO4)2 (3), which, after metathesis with NH4PF6 in CH3CN, afford [(L6(py)2)Cu(CH3CN)](PF6)2 (4), [(L7(py)2)Cu(CH3CN)](PF6)2 (5), and [(L8(py)2)Cu](PF6)2 (6). All six complexes are characterized by X-ray crystallography, which reveals that complexes supported by L6(py)2 and L7(py)2 (1, 2, 4, 5) adopt square-pyramidal geometries, while complexes 3 and 6, ligated by L8(py)2 feature tetracoordinate, distorted-square-planar copper ions. Tetragonal geometries in solution and d(x2 - y2), ground states are confirmed for the complexes by a combination of UV-visible and EPR spectroscopies. The divergent flexibility of the three supporting ligands influences the Cu(II)/Cu(I) redox potentials within the family, such that the complexes supported by the larger ligands L7(py)2 and L8(py)2 (5 and 6) exhibit quasi-reversible electron transfer processes (E1/2 approximately -0.2 V vs Ag/AgCl), while the complex supported by L6(py)2 (4), which imposes a rigid tetragonal geometry upon the central copper(II) ion, is irreversibly reduced in CH3CN solution. Complexes 4-6 are efficient catalysts (in 5 mol % amounts) for the aziridination of styrene with the iodinane PhINTs (in 80-90% yields vs PhINTs), while only 4 exhibits significant catalytic nitrene transfer reactivity with 1-hexene and cyclooctene.     

Mechanism and activity of ruthenium olefin metathesis catalysts.

This report details the effects of ligand variation on the mechanism and activity of ruthenium-based olefin metathesis catalysts. A series of ruthenium complexes of the general formula L(PR(3))(X)(2)Ru=CHR(1) have been prepared, and the influence of the substituents L, X, R, and R(1) on the rates of phosphine dissociation and initiation as well as overall activity for olefin metathesis reactions was examined. In all cases, initiation proceeds by dissociative substitution of a phosphine ligand (PR(3)) with an olefinic substrate. All of the ligands L, X, R, and R(1) have a significant impact on initiation rates and on catalyst activity. The origins of the observed substituent effects as well as the implications of these studies for the design and implementation of new olefin metathesis catalysts and substrates are discussed in detail.     

Novel lanthanide(II) complexes supported by carbon-bridged biphenolate ligands: synthesis, structure and catalytic activity

[Ln[N(SiMe3)2]2(THF)2](Ln = Sm, Yb) reacts with 1 equiv. of carbon-bridged biphenols, 2,2'-methylene-bis(6-tert-butyl-4-methylphenol)(L1H2) or 2,2'-ethylidene-bis(4,6-di-tert-butylphenol)(L2H2), in toluene to give the novel aryloxide lanthanide(II) complexes [[LnL1(THF)n]2](Ln = Sm, n = 3 (1); Ln = Yb, n = 2 (2)) and [[LnL2(THF)3]2](Ln = Sm (5); Ln = Yb (6)) in quantitative yield, respectively. Addition of 2 equiv. of hexamethylphosphoric triamide (HMPA) to a tetrahydrofuran (THF) solution of 1, 2 and 5 affords the corresponding HMPA-coordinated complexes, [[LnL1(THF)m(HMPA)n]2(THF)y](Ln = Sm, n = 2, m = 0, y = 2 (3); Ln = Yb, m = 1, n = 1, y = 6 (4)) and [[SmL2(HMPA)2]2](7) in excellent yields. The single-crystal structural analyses of 3, 4 and 7 revealed that these aryloxide lanthanide(II) complexes are dimeric with two Ln-O bridges. The coordination geometry of each lanthanide metal can be best described as a distorted trigonal bipyramid. Complexes 1-3, 5 and 7 can catalyze the ring-opening polymerization of epsilon-caprolactone (epsilon-CL), and 1-3, along with 5 show moderate activity for the ring-opening polymerization of 2,2-dimethyltrimethylene carbonate (DTC) and the copolymerization of epsilon-CL and DTC to give random copolymers with high molecular weights and relatively narrow molecular weight distributions..     

The synthesis of cyclic polymers by olefin metathesis: Achievements and challenges

Cyclic polymers have drawn considerable interest for their peculiar physical properties in comparison to linear polymers, despite their equivalent compositions. Synthetically, cyclic polymers can be accessed through either macrocyclic ring‐closure or by ring‐expansion polymerization, but the main challenge with either method is the production of highly pure cyclic polymer samples. This highlight describes advances in the area of cyclic polymer synthesis, with a particular focus on ring‐expansion metathesis polymerization. Methods for characterizing cyclic polymers and assessing their purity are also discussed in order to emphasize the need for additional robust and reliable methods for synthesizing and studying topologically complex macromolecules. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 228–242     

A highly efficient olefin metathesis initiator: improved synthesis and reactivity studies

The synthesis of ligand 8, required for the preparation of catalyst 4c has been optimised. Ligand exchange studies indicate that biphenyl-based alkylidene 4c initiates considerably faster than its unsubstituted analogue 4a. The performance of 4c in ring-opening cross metathesis reactions involving substrates containing unprotected chelating atoms is also reported.