Catalytic determination of molybdenum(VI) by means of an iodide ion-selective electrode and a landolt-type hydrogen peroxide-iodide reaction

A trace amount of molybdenum(VI) can be determined by using its catalytic effect on the oxidation of iodide to iodine by hydrogen peroxide in acidic medium. Addition of ascorbic acid added to the reaction mixture produces the Landolt effect, i.e., the iodine produced by the indicator reaction is reduced immediately by the ascorbic add. Hence the concentration of iodide begins to decrease once all the ascorbic acid has been consumed. The induction period is measured by monitoring the concentration of iodide ion with an iodide ion-selective electrode. The reciprocal of the induction period varies linearly with the concentration of molybdenum(VI). The most suitable pH and concentrations of hydrogen peroxide and potassium iodide are found to be 1.5, 5 and 10mM, respectively. An appropriate amount of ascorbic acid is added to the reaction mixture according to the concentration of molybdenum(VI) in the sample solution. A calibration graph with good proportionality is obtained for the molybdenum(VI) concentration range from 0.1 to 160 μM. Iron(III), vanadium(IV), zirconium(IV), tungsten(VI), copper(II) and chromium(VI) interfere, but iron(III) and copper(II) can be masked with EDTA.     

Kinetic determination of microquantities of D(−)-arabinose

A kinetic method for the determination of microquantities of d(?)-arabinose is presented. The method is based on the accelerating effect of d(?)-arabinose on the reaction between molybdenum(VI) and hydrogen peroxide in solution containing 50 vol% of acetonitrile. In order to find optimum experimental conditions for the determination of d(?)-arabinose, the kinetics of the reaction between molybdenum(VI) and hydrogen peroxide in the presence, as well as in the absence, of d(?)-arabinose was studied. d(?)-Arabinose was determined photometrically by following the rate of the colored reaction product formation. The concentrations of d(?)-arabinose which were determined ranged from 46 to 135 μg/ml, and the standard deviation was lower than 10%.     

Chromatographic separation of vanadium, tungsten and molybdenum with a liquid anion-exchanger

In acidic solution only molybdenum(VI), tungsten(VI), vanadium(V), niobium(V) and tantalum(V) form stable, anionic complexes with dilute hydrogen peroxide. This fact has been used in developing an analytical method of separating molybdenum(VI), tungsten(VI) and vanadium(V) from other metal ions and from each other. Preliminary investigations using reversed-phase paper chromatography and solvent extraction led to a reversed-phase column Chromatographic separation technique. These metal-peroxy anions are retained by a column containing a liquid anion-exchanger (General Mills Aliquat 336) in a solid support. Then molybdenum(VI), tungsten(VI) and vanadium(V) are selectively eluted with aqueous solutions containing dilute hydrogen peroxide and varying concentrations of sulphuric acid.     

Reduction of tris(benzene-1,2-dithiolate)molybdenum(VI) by hydroxide ions in dry tetrahydrofuran solution

Tris(benzene-1,2-dithiolate)molybdenum(VI) reacts rapidly and quantitatively with tetrabutylammonium hydroxide to yield the corresponding Mo(V) and Mo(IV) complexes and hydrogen peroxide; the reaction has been executed in dry tetrahydrofuran where the reaction rate shows a fair dependence on complex and OH- concentrations.     

Flow-injection catalytic determination of molybdenum with blamperometric detection in a microprocessor-controlled system

The flow-injection determination of molybdenum(VI) is based on its catalytic effect on the oxidation of iodide by hydrogen peroxide. The triiodide ion formed in this reaction is detected amperometrically in a flow-through cell containing two platinum wire electrodes polarized at 100 mV. After optimization of the measuring conditions, the detection limit is 1.2 μg l^?1 Mo(VI) and the linear range extends to 1 mg l^?1. Interference of various metal ions and their removal is described. The procedure was tested on the determination of molybdenum(VI) in soil extracts.     

Study of the interaction of molybdenum(VI) ions with γ-alumina by pulse technique

The mechanism of interaction between molybdenum(VI) as aqueous solutions of ammonium paramolybdate and γ-alumina, has been studied in transient conditions by pulse technique, using combined differential refractive index and u.v. absorption detectors. In acidic environment, molybdenum(VI) species are irreversibly adsorbed through an anionic exchange mechanism with liberation of ammonium salts. In a neutral environment, molybdenum(VI) species are only partially irreversibly adsorbed onto γ-alumina through a protonic transfer mechanism with liberation of basic species. The depletion of H₃O⁺ due to adsorption of molybdenum(VI) from neutral solution, provides an explanation of the observed mutual enhancement of cobalt(II) and molybdenum(VI) adsorption on alumina. The general result presented in this paper can be summarized by stating that the amount of irreversibly adsorbed molybdenum(VI) is related to the amount of available basic sites present onto alumina.     

Katalytisch-kinetische bestimmung von katalase, kupfer, molybdän und jodid mit hilfe eines biamperostaten

Biamperometrically observable reactions may be evaluated by the “potentiostat”-method with the application of a current-to-voltage transducer. The catalase-catalyzed autodecomposition of hydrogen peroxide, the copper-catalyzed oxidation of iodide with peroxydisulfate, the molybdenum(VI)-catalyzed oxidation of iodide with hydrogen peroxide, and the iodide-catalyzed oxidation of arsenic(III) with cerium(IV) are used to illustrate this concept. The catalysts, catalase, copper(II), molybdenum(VI) and iodide, as well as azide as an inhibitor for catalase, can be determined in the p.p.b.-p.p.m. range.     

Extraction of Molybdenum(VI) from Aqueous-Peroxide Solutions of Sodium Tungstate with Trialkylamine

The extraction of molybdenum(VI) from aqueous-peroxide solutions of sodium tungstate with a trialkylamine-isooctyl alcohol mixture in kerosene was studied in relation to the ratio of the organic and aqueous phases, hydrogen peroxide and hydrogen chloride consumption, and the ratio of molybdenum(VI) and tungsten (VI) in the aqueous phase. A method for additional purification of the raffinate to remove molybdenum was developed.     

New insights into the reaction of t-butylhydroperoxide with dichloro- and dimethyl(dioxo)molybdenum(VI)

Lewis-base adducts of dichlorodioxomolybdenum(VI) and dimethyldioxomolybdenum(VI) react in an equilibrium reaction with excess t-butylhydroperoxide (TBHP) under the formation of a seven-coordinated molybdenum(VI) complexes displaying a η¹-alkylperoxo-ligand. HCl/CH₄ elimination or the protonation of the Lewis-base ligand is not observed, the TBHP hydrogen atom is instead transferred to one of the terminal oxo ligands under the formation of a molybdenum bound OH moiety. The peroxo species is assumed to be the active catalyst in olefin epoxidation.     

Kinetic-spectrophotometric determination of molybdenum (VI) and tungsten (VI) in mixtures

A simple kinetic-spectrophotometric method is described for the determination of molybdenum(VI) and tungsten(VI) in mixtures, without prior separation. The method is based on the catalytic effect of molybdenum(VI) and tungsten(VI) on the oxidation of 2,4-diaminophenol dihydrochloride (DAP) by hydrogen peroxide in acidic medium. The reaction was followed spectrophotometrically by measuring the rate of change in absorbance with time at 500 nm. A partial inhibition in the catalytic activity of each catalyst, when the other one is present, at all ratios of Mo(VI) W(VI) mixtures studied was observed. On the other hand, the catalytic activity of tungsten(VI) dropped to zero whilst that of molybdenum(VI) decreased slightly, in the presence of citrate ions. Two sets of experiments were carried out, the first in the absence and the other in the presence of citrate, and the resolution of Mo(VI)/W(VI) mixtures was achieved by solving two simultaneous equations. Various molar ratios of Mo(VI) W(VI), at the 10^–6 M level, from 0.2 1 to 5 1 can be determined with satisfactory precision and accuracy. The selectivity of the method was investigated and the method was applied successfully to the determination of molybdenum and tungsten in each other's presence in steel.     

A solvent extraction study of molybdenum chloride and molybdenum thiocyanate complexes

The effect of reducing agents on molybdenum(VI) solutions in hydrochloric acid was studied by a solvent extraction technique to elucidate the composition of the colored molybdenum thiocyanate complex. Neither copper(I) chloride nor ascorbic acid have any effect on the extraction of MoO₂Cl₂; it is inferred that tin(II) chloride reduces Mo(VI) stepwise to a polynuclear Mo(V)·Mo(VI) complex and then to Mo(V). The colored thiocyanate complex produced by copper(I) and by ascorbic acid differs only slightly in extraction characteristics from the uncolored Mo(VI) complex. It is suggested that the color may be produced by an isomerization reaction of MoO₂(SCN)₂, and thus that the colored species may be a hexavalent rather than pentavalent molybdenum complex.     

Organophosphinic,phosphonic acids and their binary mixtures as extractants for molybdenum(VI) and uranium(VI) from aqueous HCl media

Extraction studies of uranium(VI) and molybdenum(VI) with organophosphoric, phosphinic acid and its thiosubstituted derivatives have been carried out from 0.1–1.0M HCl solutions. The extracted species are proposed to be UO₂R₂ and MoO₂ CIR on the basis of slope analysis for uranium(VI) and molybdenum(VI), respectively. The extraction efficiencies of PC-88A, Cyanex 272, Cyanex 301 and Cyanex 302 in the extraction of molybdenum(VI) and uranium(VI) are compared. Synergistic effects have been studied with binary mixtures of extractants. Separation of molybdenum(VI) from uranium(VI) is feasible by Cyanex 301 from 1M HCl, the separation factor log being 2.3.     

Extractive separation of molybdenum as Mo(V) xanthate from Iron, vanadium, Tungsten, copper, uranium and other elements

A simple and selective extraction of molybdenum is described. Tungsten is masked with tartaric acid and molybdenum(VI) is reduced in 2M hydrochloric acid by boiling with hydrazine sulphate. Iron, copper and vanadium are then masked with ascorbic acid, thiourea and potassium hydrogen fluoride respectively. The molybdenum(V) is extracted as its xanthate complex into chloroform, from 1M hydrochloric acid that is 0.4M potassium ethyl xanthate. The complex is decomposed by excess of liquid bromine, and the molybdenum is stripped into alkaline hydrogen peroxide solution. The molybdenum is then determined by standard methods. Large amounts of Cu(II), Mn(II), Fe(III), Ti(IV), Zr, Ce(IV), V(V), Nb, Cr(VI), W(VI), U(VI), Re(VII) and Os(VIII) do not interfere. Several synthetic samples and ferromolybdenum have been rapidly and satisfactorily analysed by the method.     

Spectrophotometric reaction rate method for the determination of molybdenum by its catalytic effect on the oxidation of pyrogallol red with hydrogen peroxide

A kinetic spectrophotometric method for the determination of molybdenum is based on its catalytic effect on the oxidation of pyrogallol red with hydrogen peroxide. The decrease of the absorbance of pyrogallol red in the presence of hydrogen peroxide with time from 0.5 to 4.5 min is proportional to the concentration of Mo(VI) over the range 0.010–0.500 μg/mL. The limit of detection is 0.008 μg Mo/mL. The precision and the effect of the presence of more than forty ions on the molybdenum determination are reported. Probable interferences are completely removed by a cation exchange resin. The procedure was successfully applied to the determination of molybdenum in plant materials and steels. Received: 28 April 1997 / Revised: 16 June 1997 / Accepted: 18 June 1997     

Spectrophotometric reaction rate method for the determination of molybdenum by its catalytic effect on the oxidation of pyrogallol red with hydrogen peroxide

A kinetic spectrophotometric method for the determination of molybdenum is based on its catalytic effect on the oxidation of pyrogallol red with hydrogen peroxide. The decrease of the absorbance of pyrogallol red in the presence of hydrogen peroxide with time from 0.5 to 4.5 min is proportional to the concentration of Mo(VI) over the range 0.010–0.500 μg/mL. The limit of detection is 0.008 μg Mo/mL. The precision and the effect of the presence of more than forty ions on the molybdenum determination are reported. Probable interferences are completely removed by a cation exchange resin. The procedure was successfully applied to the determination of molybdenum in plant materials and steels. Received: 28 April 1997 / Revised: 16 June 1997 / Accepted: 18 June 1997     

The (Calix[4]arene)chloromolybdate(IV) anion [MoCl(Calix)](-): a convenient entry into molybdenum Calix[4]arene chemistry

The complex (HNEt(3))[MoCl(NCMe)(Calix)] (1), prepared from the reaction of [MoCl(4)(NCMe)(2)] with p-tert-butylcalix[4]arene, H(4)Calix, in the presence of triethylamine, has been used as a source of the d(2)-[Mo(NCMe)(Calix)] fragment. Complex 1 is readily oxidized with PhICl(2) to afford the molybdenum(VI) dichloro complex [MoCl(2)(Calix)] (2). Both complexes are a convenient entry point into molybdenum(VI) and molybdenum(IV) calixarene chemistry. The reaction of 1 with trimethylphosphine and pyridine in the presence of catalytic amounts [Ag(OTf)] led to the formation of neutral d(2) complexes [Mo(PMe(3))(NCMe)(Calix)] (3) and [Mo(NC(5)H(5))(NCMe)(Calix)] (4). The role of the silver salt in the reaction mixture is presumably the oxidation of the chloromolybdate anion of 1 to give a reactive molybdenum(V) species. The same reactions can also be initiated with ferrocenium cations such as [Cp(2)Fe](BF(4)). Without the presence of coordinating ligands, the dimeric complex [[Mo(NCMe)(Calix)](2)] (5) was isolated. The reaction of 1 with Ph(2)CN(2) led to the formation of a metallahydrazone complex [Mo(N(2)CPh(2))(NCMe)(Calix)] (6), in which the diphenyldiazomethane has been formally reduced by two electrons. Molybdenum(VI) complexes were also obtained from reaction of 1 with azobenzene and sodium azide in the presence of catalytic amounts of silver salt. The reaction with azobenzene led under cleavage of the nitrogen nitrogen bond to an imido complex [Mo(NPh)(NCMe)(Calix)] (7), whereas the reaction with sodium azide afforded the mononuclear molybdenum(VI) nitrido complex (HNEt(3))[MoN(Calix)] (8).     

Thermodynamic and Kinetic Studies on Oxidation of Pyrogallol Red by Hydrogen Peroxide in the Absence and Presence of Molybdenum(VI)

Abstract

The oxidation of pyrogallol red (PGR) by hydrogen peroxide has been studied both in the absence and presence of molybdenum(VI) at pH of 7.0 by spectrophotometric detection. The reaction rate was studied with a fix-time method from 0.5 to 4.5 min. The effect of reagents concentration, ionic strength and temperature was studied to give the optimum conditions. At the optimizing conditions the rate constant, energy and entropy of activation and frequency factor have been calculated using the Arrhenius and Eyring plots.     

Kinetics of reduction of transition metal ions by sodium tetrahydroborate. Reduction of molybdenum(VI) and tungsten(VI)

Summary The kinetics of reduction of molybdenum(VI) and tungsten(VI) ions by NaBH₄ in buffered aqueous solution have been investigated. The reaction rate depends upon the first powers of the concentrations of the reactants. The temperature was varied, and the activation parameters were evaluated. Chemical and spectral evidence for the formation of molybdenum(V) and tungsten(V), as the reaction products, is presented. Plausible mechanistic pathways for these reactions are suggested.     

Olefin epoxidations in the ionic liquid [C4mim][PF6] catalysed by oxodiperoxomolybdenum species in situ generated from molybdenum trioxide and urea–hydrogen peroxide: The synthesis and molecular structure of [Mo(O)(O2)2(4-MepyO)2]·H2O

Commercially available molybdenum(VI) compounds, including molybdenum trioxide, were successfully employed as catalyst precursors in the epoxidation of olefins with urea–hydrogen peroxide adduct (UHP) in the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate, [C₄mim][PF₆]. After oxidation, the corresponding epoxides were isolated by extraction with diethyl ether. Additionally the ionic liquid–catalyst mixture was recycled and reused in further catalytic cycles. The catalytic species is assumed to be an oxodiperoxomolybdenum species which forms in situ. A representative complex of this type was thus isolated and characterised. Reaction of excess 4-methylpyridine-1-oxide (4-MepyO) with MoO₃ dissolved in aqueous hydrogen peroxide afforded [Mo(O)(O₂)₂(4-MepyO)₂]·H₂O (1) as yellow crystals. Compound 1, an active epoxidation catalyst, was subsequently characterised and its structure determined by X-ray crystallography.     

Flow-injection catalytic spectrophotometic determination of molybdenum(VI) in plants using bromate oxidative coupling of p-hydrazinobensenesulfonic acid with N-(1-naphthyl)ethylenediamine

A novel flow-injection spectrophotometry has been developed for the determination of molybdenum(VI) at nanograms per milliliter levels. The method is based on the catalytic effect of molybdenum(VI) on the bromate oxidative coupling of p-hydrazinobenzenesulfonic acid with N-(1-naphthyl)ethylenediamine to form an azo dye (λ_max = 530 nm). Chromotropic acid (4,5-dihydroxy-2,7-naphthalenedisulfonic acid) acted as an effective activator for the molybdenum(VI)-catalyzed reaction and increased the sensitivity of the method. The reaction was monitored by measuring the change in absorbance of the dye produced. The proposed method allowed the determination of molybdenum(VI) in the range 1.0-20 ng mL⁻¹ with sample throughput of 15 h⁻¹. The limit of detection was 0.5 ng mL⁻¹ and a relative standard deviation for 10 ng mL⁻¹ molybdenum(VI) (n = 10) was 2.5%. The interfering ions were eliminated by using the combination of a masking agent and on-line minicolumn packed with cation exchanger. The present method was successfully applied to the determination of molybdenum(VI) in plant foodstuffs.